I am experiencing similar problems on a vaio VGN-FE11H. I have just tried Enola Gay's fix, alas to no avail. My symptons are similar. Suspending or hibernating seems to work in as much as it powers down. Resuming does not go so well. X only partially returns, the scren remains black except for a square area around the mouse cursor, which is just displays broken artifacts. Opening a different terminal and killing X allows the gnome to come back normally, though my network connection is lost and no amount of modprobe-ing or ifup/down-ing will revive it. I have attached a lsmod, dmesg and /var/log/messages from around the time of hibernate. ================================================================== lsmod ================================================================== Module Size Used by nls_iso8859_1 5120 1 nls_cp437 6784 1 vfat 14208 1 fat 53916 1 vfat usb_storage 72256 1 libusual 17936 1 usb_storage battery 10756 0 ac 6020 0 thermal 14856 0 fan 5636 0 button 8720 0 ipw3945 118816 1 ieee80211 34760 1 ipw3945 e100 36232 0 mii 6528 1 e100 binfmt_misc 12680 1 rfcomm 40856 0 l2cap 25728 5 rfcomm bluetooth 55908 4 rfcomm,l2cap sonypi 23196 0 ppdev 10116 0 acpi_cpufreq 10056 0 cpufreq_powersave 2688 0 cpufreq_ondemand 9228 2 cpufreq_stats 7360 0 freq_table 5792 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats cpufreq_userspace 5408 0 cpufreq_conservative 8200 0 tc1100_wmi 8068 0 sony_acpi 6284 0 pcc_acpi 13184 0 dev_acpi 12292 0 ipv6 268704 10 sbs 15652 0 container 5248 0 dock 10268 0 i2c_ec 5888 1 sbs asus_acpi 17308 0 video 16388 0 backlight 7040 1 asus_acpi arc4 2944 0 ecb 4480 0 blkcipher 6784 1 ecb ieee80211_crypt_wep 6144 0 nls_utf8 3072 3 ntfs 107764 3 eeprom 8336 0 i2c_i801 9356 0 sbp2 23812 0 parport_pc 36388 0 lp 12452 0 parport 36936 3 ppdev,parport_pc,lp fuse 46612 0 snd_hda_intel 21912 1 snd_hda_codec 205440 1 snd_hda_intel snd_pcm_oss 44544 0 snd_mixer_oss 17408 1 snd_pcm_oss snd_pcm 79876 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_dummy 4740 0 snd_seq_oss 32896 0 pcmcia 39212 0 joydev 10816 0 snd_seq_midi 9600 0 snd_rawmidi 25472 1 snd_seq_midi snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi snd_seq 52592 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 23684 2 snd_pcm,snd_seq snd_seq_device 9100 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq nvidia 4713780 32 ieee80211_crypt 7040 2 ieee80211,ieee80211_crypt_wep i2c_core 22784 4 i2c_ec,eeprom,i2c_i801,nvidia snd 54020 12 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device iTCO_wdt 11812 0 yenta_socket 27532 1 rsrc_nonstatic 14080 1 yenta_socket pcmcia_core 40852 3 pcmcia,yenta_socket,rsrc_nonstatic iTCO_vendor_support 4868 1 iTCO_wdt soundcore 8672 1 snd intel_agp 25116 1 serio_raw 7940 0 agpgart 35400 2 nvidia,intel_agp psmouse 38920 0 tifm_7xx1 10240 0 tifm_core 9856 1 tifm_7xx1 shpchp 34324 0 pci_hotplug 32576 1 shpchp snd_page_alloc 10888 2 snd_hda_intel,snd_pcm af_packet 23816 8 tsdev 8768 0 evdev 11008 4 ext3 133128 2 jbd 59816 1 ext3 mbcache 9604 1 ext3 sg 36252 0 sd_mod 23428 9 sr_mod 17060 0 cdrom 37664 1 sr_mod generic 5124 0 [permanent] ata_generic 9092 0 ata_piix 15492 6 libata 125720 2 ata_generic,ata_piix scsi_mod 142348 6 usb_storage,sbp2,sg,sd_mod,sr_mod,libata ohci1394 36528 0 ieee1394 299448 2 sbp2,ohci1394 uhci_hcd 25360 0 ehci_hcd 34188 0 usbcore 134280 5 usb_storage,libusual,uhci_hcd,ehci_hcd processor 31048 2 thermal,acpi_cpufreq fbcon 42656 0 tileblit 3584 1 fbcon font 9216 1 fbcon bitblit 6912 1 fbcon softcursor 3200 1 bitblit vesafb 9220 0 capability 5896 0 commoncap 8192 1 capability ================================================================== dmesg ================================================================== [ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000c2000 size: 000000000000e000 end: 00000000000d0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fd90000 end: 000000003fe90000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003fe90000 size: 000000000000a000 end: 000000003fe9a000 type: 3 [ 0.000000] copy_e820_map() start: 000000003fe9a000 size: 0000000000066000 end: 000000003ff00000 type: 4 [ 0.000000] copy_e820_map() start: 000000003ff00000 size: 0000000000100000 end: 0000000040000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000c2000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe90000 (usable) [ 0.000000] BIOS-e820: 000000003fe90000 - 000000003fe9a000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fe9a000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7330 [ 0.000000] Entering add_active_range(0, 0, 261776) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261776 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261776 [ 0.000000] On node 0 totalpages: 261776 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32147 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f7260 [ 0.000000] ACPI: RSDT (v001 Sony Capell00 0x20060523 PTL 0x00000000) @ 0x3fe931b5 [ 0.000000] ACPI: FADT (v002 Sony J3 0x20060523 PTL 0x0000005a) @ 0x3fe99e10 [ 0.000000] ACPI: MADT (v001 Sony J3 0x20060523 PTL 0x0000005a) @ 0x3fe99e94 [ 0.000000] ACPI: BOOT (v001 Sony J3 0x20060523 PTL 0x00000001) @ 0x3fe99fd8 [ 0.000000] ACPI: MCFG (v001 Sony J3 0x20060523 PTL 0x0000005a) @ 0x3fe99f34 [ 0.000000] ACPI: MADT (v001 Sony J3 0x20060523 PTL 0x00000000) @ 0x3fe99f70 [ 0.000000] ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050228) @ 0x3fe9421d [ 0.000000] ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050228) @ 0x3fe93b81 [ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050228) @ 0x3fe931f9 [ 0.000000] ACPI: DSDT (v001 Sony J3 0x20060523 PTL 0x20050228) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: 2 duplicate APIC table ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Detected 1662.680 MHz processor. [ 23.174819] Built 1 zonelists. Total pages: 259731 [ 23.174825] Kernel command line: root=UUID=74f1a014-61a8-470e-8088-c87fa39945b3 ro quiet splash [ 23.175083] mapped APIC to ffffd000 (fee00000) [ 23.175087] mapped IOAPIC to ffffc000 (fec00000) [ 23.175091] Enabling fast FPU save and restore... done. [ 23.175096] Enabling unmasked SIMD FPU exception support... done. [ 23.175106] Initializing CPU#0 [ 23.175180] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 23.178156] Console: colour VGA+ 80x25 [ 23.178432] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 23.178961] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 23.221815] Memory: 1026660k/1047104k available (1992k kernel code, 19712k reserved, 893k data, 328k init, 129600k highmem) [ 23.221831] virtual kernel memory layout: [ 23.221833] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 23.221835] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 23.221838] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 23.221840] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 23.221842] .init : 0xc03d7000 - 0xc0429000 ( 328 kB) [ 23.221844] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB) [ 23.221846] .text : 0xc0100000 - 0xc02f2264 (1992 kB) [ 23.221852] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 23.299007] Calibrating delay using timer specific routine.. 3329.46 BogoMIPS (lpj=6658924) [ 23.299065] Security Framework v1.0.0 initialized [ 23.299075] SELinux: Disabled at boot. [ 23.299099] Mount-cache hash table entries: 512 [ 23.299280] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 23.299293] monitor/mwait feature present. [ 23.299296] using mwait in idle threads. [ 23.299302] CPU: L1 I cache: 32K, L1 D cache: 32K [ 23.299307] CPU: L2 cache: 2048K [ 23.299311] CPU: Physical Processor ID: 0 [ 23.299314] CPU: Processor Core ID: 0 [ 23.299317] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 23.299332] Compat vDSO mapped to ffffe000. [ 23.299337] Remapping vsyscall page to ffffe000 [ 23.299355] Checking 'hlt' instruction... OK. [ 23.315136] SMP alternatives: switching to UP code [ 23.315655] Early unpacking initramfs... done [ 23.884121] ACPI: Core revision 20060707 [ 23.884433] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 23.908247] CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 [ 23.908278] SMP alternatives: switching to SMP code [ 23.908428] Booting processor 1/1 eip 3000 [ 23.918989] Initializing CPU#1 [ 23.997976] Calibrating delay using timer specific routine.. 3325.34 BogoMIPS (lpj=6650693) [ 23.997986] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 23.997994] monitor/mwait feature present. [ 23.998000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 23.998003] CPU: L2 cache: 2048K [ 23.998007] CPU: Physical Processor ID: 0 [ 23.998009] CPU: Processor Core ID: 1 [ 23.998012] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 23.998733] CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 [ 23.998766] Total of 2 processors activated (6654.80 BogoMIPS). [ 23.998968] ENABLING IO-APIC IRQs [ 23.999194] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 24.145772] checking TSC synchronization across 2 CPUs: passed. [ 0.003992] Brought up 2 CPUs [ 0.143571] migration_cost=34 [ 0.143994] Booting paravirtualized kernel on bare hardware [ 0.144101] Time: 18:15:17 Date: 04/28/107 [ 0.144143] NET: Registered protocol family 16 [ 0.144270] EISA bus registered [ 0.144277] ACPI: bus type pci registered [ 0.144438] PCI: PCI BIOS revision 2.10 entry at 0xfd863, last bus=10 [ 0.144442] PCI: Using configuration type 1 [ 0.144444] Setting up standard PCI resources [ 0.151604] ACPI: Interpreter enabled [ 0.151608] ACPI: Using IOAPIC for interrupt routing [ 0.152731] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.152741] PCI: Probing PCI hardware (bus 00) [ 0.154908] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.154916] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.155275] Boot video device is 0000:01:00.0 [ 0.156553] PCI: Transparent bridge - 0000:00:1e.0 [ 0.156646] PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0b) (try 'pci=assign-busses') [ 0.156651] Please report the result to linux-kernel to fix this permanently [ 0.156761] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.169855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.171087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.171530] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.171989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.172430] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.174456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.176190] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.176601] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15) [ 0.177007] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.177416] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.177826] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.178239] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.178652] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15) [ 0.179060] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15) [ 0.186312] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.186326] pnp: PnP ACPI init [ 0.190382] pnp: PnP ACPI: found 9 devices [ 0.190390] PnPBIOS: Disabled by ACPI PNP [ 0.190453] PCI: Using ACPI for IRQ routing [ 0.190458] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.231564] NET: Registered protocol family 8 [ 0.231567] NET: Registered protocol family 20 [ 0.232293] PCI: Failed to allocate mem resource #6:20000@c0000000 for 0000:01:00.0 [ 0.232357] PCI: Bridge: 0000:00:01.0 [ 0.232359] IO window: disabled. [ 0.232366] MEM window: d0000000-d1ffffff [ 0.232371] PREFETCH window: b0000000-bfffffff [ 0.232377] PCI: Bridge: 0000:00:1c.0 [ 0.232381] IO window: 2000-2fff [ 0.232389] MEM window: c8000000-c9ffffff [ 0.232396] PREFETCH window: c0000000-c1ffffff [ 0.232404] PCI: Bridge: 0000:00:1c.1 [ 0.232409] IO window: 3000-3fff [ 0.232416] MEM window: ca000000-cbffffff [ 0.232423] PREFETCH window: c2000000-c3ffffff [ 0.232431] PCI: Bridge: 0000:00:1c.2 [ 0.232436] IO window: 4000-4fff [ 0.232444] MEM window: cc000000-cdffffff [ 0.232451] PREFETCH window: c4000000-c5ffffff [ 0.232459] PCI: Bridge: 0000:00:1c.3 [ 0.232463] IO window: 5000-5fff [ 0.232471] MEM window: ce000000-cfffffff [ 0.232478] PREFETCH window: c6000000-c7ffffff [ 0.232495] PCI: Bus 11, cardbus bridge: 0000:0a:03.0 [ 0.232499] IO window: 00006400-000064ff [ 0.232506] IO window: 00006800-000068ff [ 0.232514] PREFETCH window: 50000000-53ffffff [ 0.232521] MEM window: 54000000-57ffffff [ 0.232528] PCI: Bridge: 0000:00:1e.0 [ 0.232532] IO window: 6000-6fff [ 0.232540] MEM window: d2000000-d20fffff [ 0.232547] PREFETCH window: 50000000-53ffffff [ 0.232570] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.232578] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.232607] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.232616] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.232644] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.232653] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.232682] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.232691] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.232720] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 21 (level, low) -> IRQ 19 [ 0.232729] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.232743] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) [ 0.232752] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.232773] PCI: Enabling device 0000:0a:03.0 (0000 -> 0003) [ 0.232779] ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.232827] NET: Registered protocol family 2 [ 0.287645] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.287795] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.288987] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.289595] TCP: Hash tables configured (established 131072 bind 65536) [ 0.289599] TCP reno registered [ 0.303747] checking if image is initramfs... it is [ 1.430346] Freeing initrd memory: 6994k freed [ 1.430568] Simple Boot Flag at 0x36 set to 0x1 [ 1.431259] audit: initializing netlink socket (disabled) [ 1.431281] audit(1180376118.472:1): initialized [ 1.431423] highmem bounce pool size: 64 pages [ 1.431555] VFS: Disk quotas dquot_6.5.1 [ 1.431582] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.431653] io scheduler noop registered [ 1.431658] io scheduler anticipatory registered [ 1.431662] io scheduler deadline registered [ 1.431681] io scheduler cfq registered (default) [ 1.432018] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 1.432069] assign_interrupt_mode Found MSI capability [ 1.432074] Allocate Port Service[0000:00:01.0:pcie00] [ 1.432205] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.432273] assign_interrupt_mode Found MSI capability [ 1.432277] Allocate Port Service[0000:00:1c.0:pcie00] [ 1.432337] Allocate Port Service[0000:00:1c.0:pcie02] [ 1.432491] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.432558] assign_interrupt_mode Found MSI capability [ 1.432562] Allocate Port Service[0000:00:1c.1:pcie00] [ 1.432614] Allocate Port Service[0000:00:1c.1:pcie02] [ 1.432769] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 1.432837] assign_interrupt_mode Found MSI capability [ 1.432841] Allocate Port Service[0000:00:1c.2:pcie00] [ 1.432894] Allocate Port Service[0000:00:1c.2:pcie02] [ 1.433049] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 1.433117] assign_interrupt_mode Found MSI capability [ 1.433121] Allocate Port Service[0000:00:1c.3:pcie00] [ 1.433179] Allocate Port Service[0000:00:1c.3:pcie02] [ 1.433429] isapnp: Scanning for PnP cards... [ 1.787185] isapnp: No Plug & Play device found [ 1.824842] Real Time Clock Driver v1.12ac [ 1.824933] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.825920] mice: PS/2 mouse device common for all mice [ 1.826778] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.827112] input: Macintosh mouse button emulation as /class/input/input0 [ 1.827167] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1.827173] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.827470] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.831775] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.837441] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.837448] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.837452] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.837456] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.837461] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.837792] EISA: Probing bus 0 at eisa.0 [ 1.837804] Cannot allocate resource for EISA slot 1 [ 1.837810] Cannot allocate resource for EISA slot 2 [ 1.837814] Cannot allocate resource for EISA slot 3 [ 1.837818] Cannot allocate resource for EISA slot 4 [ 1.837822] Cannot allocate resource for EISA slot 5 [ 1.837826] Cannot allocate resource for EISA slot 6 [ 1.837840] EISA: Detected 0 cards. [ 1.867931] TCP cubic registered [ 1.867945] NET: Registered protocol family 1 [ 1.867977] Starting balanced_irq [ 1.867987] Using IPI No-Shortcut mode [ 1.868080] ACPI: (supports S0 S3 S4 S5) [ 1.868152] Magic number: 7:726:292 [ 1.868171] hash matches device ttyz6 [ 1.868273] hash matches device tty25 [ 1.868472] Freeing unused kernel memory: 328k freed [ 1.869234] Time: tsc clocksource has been installed. [ 2.040489] input: AT Translated Set 2 keyboard as /class/input/input1 [ 3.201194] Capability LSM initialized [ 3.263691] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] [ 3.264324] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] [ 3.264759] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 3.264767] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.265581] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] [ 3.265914] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707] [ 3.266420] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 3.266428] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.268837] ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active threshold [0] [20060707] [ 4.128000] ACPI: Thermal Zone [TZ00] (53 C) [ 4.128000] ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active threshold [0] [20060707] [ 4.132000] ACPI: Thermal Zone [TZ01] (53 C) [ 4.136000] Time: acpi_pm clocksource has been installed. [ 4.608000] usbcore: registered new interface driver usbfs [ 4.608000] usbcore: registered new interface driver hub [ 4.608000] usbcore: registered new device driver usb [ 4.608000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 4.608000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.608000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.608000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 4.608000] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.608000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.608000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd2304000 [ 4.612000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.612000] usb usb1: configuration #1 chosen from 1 choice [ 4.612000] hub 1-0:1.0: USB hub found [ 4.612000] hub 1-0:1.0: 8 ports detected [ 4.736000] USB Universal Host Controller Interface driver v3.0 [ 4.736000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 4.736000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 4.736000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.736000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.736000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 [ 4.736000] usb usb2: configuration #1 chosen from 1 choice [ 4.736000] hub 2-0:1.0: USB hub found [ 4.736000] hub 2-0:1.0: 2 ports detected [ 4.836000] ieee1394: Initialized config rom entry `ip1394' [ 4.840000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 4.840000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 4.840000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.840000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 4.840000] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 [ 4.840000] usb usb3: configuration #1 chosen from 1 choice [ 4.840000] hub 3-0:1.0: USB hub found [ 4.840000] hub 3-0:1.0: 2 ports detected [ 4.872000] SCSI subsystem initialized [ 4.880000] libata version 2.20 loaded. [ 4.904000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI [ 4.904000] e100: Copyright(c) 1999-2006 Intel Corporation [ 4.944000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 4.944000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 4.944000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.944000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 4.944000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 4.944000] usb usb4: configuration #1 chosen from 1 choice [ 4.944000] hub 4-0:1.0: USB hub found [ 4.944000] hub 4-0:1.0: 2 ports detected [ 5.048000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 5.048000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 5.048000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.048000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 5.048000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 5.048000] usb usb5: configuration #1 chosen from 1 choice [ 5.048000] hub 5-0:1.0: USB hub found [ 5.048000] hub 5-0:1.0: 2 ports detected [ 5.152000] PCI: Enabling device 0000:0a:03.1 (0000 -> 0002) [ 5.152000] ACPI: PCI Interrupt 0000:0a:03.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 5.204000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d2006000-d20067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 5.204000] ata_piix 0000:00:1f.1: version 2.10ac1 [ 5.204000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 5.204000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 5.204000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14 [ 5.204000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15 [ 5.204000] scsi0 : ata_piix [ 5.540000] ata1.00: ATAPI, max UDMA/33 [ 5.720000] ata1.00: configured for UDMA/33 [ 5.720000] scsi1 : ata_piix [ 5.720000] ata2: port disabled. ignoring. [ 5.728000] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-K16M 1.00 PQ: 0 ANSI: 5 [ 5.728000] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ] [ 5.728000] ata_piix 0000:00:1f.2: invalid MAP value 0 [ 5.884000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21 [ 5.884000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 5.884000] ata3: SATA max UDMA/133 cmd 0x000118c8 ctl 0x000118ae bmdma 0x000118b0 irq 21 [ 5.884000] ata4: SATA max UDMA/133 cmd 0x000118c0 ctl 0x000118aa bmdma 0x000118b8 irq 21 [ 5.884000] scsi2 : ata_piix [ 6.048000] ata3.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568 [ 6.048000] ata3.00: ATA-7: FUJITSU MHV2100BH, 00000025, max UDMA/100 [ 6.048000] ata3.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 6.056000] ata3.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568 [ 6.056000] ata3.00: configured for UDMA/100 [ 6.056000] scsi3 : ata_piix [ 6.212000] ATA: abnormal status 0x7F on port 0x000118c7 [ 6.216000] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHV2100B 0000 PQ: 0 ANSI: 5 [ 6.216000] PCI: Enabling device 0000:0a:08.0 (0000 -> 0003) [ 6.216000] ACPI: PCI Interrupt 0000:0a:08.0[A] -> GSI 20 (level, low) -> IRQ 22 [ 6.248000] e100: eth0: e100_probe: addr 0xd2005000, irq 22, MAC addr 00:13:A9:0E:3F:F0 [ 6.312000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.312000] Uniform CD-ROM driver Revision: 3.20 [ 6.312000] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 6.312000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 6.312000] sda: Write Protect is off [ 6.312000] sda: Mode Sense: 00 3a 00 00 [ 6.312000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.312000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 6.312000] sda: Write Protect is off [ 6.312000] sda: Mode Sense: 00 3a 00 00 [ 6.312000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.312000] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 6.316000] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 6.400000] sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > [ 6.464000] sd 2:0:0:0: Attached scsi disk sda [ 6.476000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301fd9786] [ 6.880000] Attempting manual resume [ 6.880000] swsusp: Resume From Partition 8:6 [ 6.880000] PM: Checking swsusp image. [ 6.880000] PM: Resume from disk failed. [ 6.948000] kjournald starting. Commit interval 5 seconds [ 6.948000] EXT3-fs: mounted filesystem with ordered data mode. [ 19.052000] NET: Registered protocol family 17 [ 19.456000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 19.464000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.568000] PCI: Enabling device 0000:0a:03.2 (0000 -> 0002) [ 19.568000] ACPI: PCI Interrupt 0000:0a:03.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 19.676000] Linux agpgart interface v0.102 (c) Dave Jones [ 19.688000] agpgart: Detected an Intel 945GM Chipset. [ 19.708000] agpgart: AGP aperture is 256M @ 0x0 [ 19.756000] iTCO_vendor_support: vendor-support=0 [ 19.792000] Yenta: CardBus bridge found at 0000:0a:03.0 [104d:81ef] [ 19.792000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 19.792000] Yenta: Routing CardBus interrupts to PCI [ 19.792000] Yenta TI: socket 0000:0a:03.0, mfunc 0x01131b22, devctl 0x64 [ 19.796000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 19.880000] ieee80211_crypt: registered algorithm 'NULL' [ 19.924000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 19.924000] ieee80211: Copyright (C) 2004-2005 Intel Corporation