[ 0.000000] Linux version 2.6.20-16-generic (root@king) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 19:00:28 UTC 2007 (Ubuntu 2.6.20-16.29-generic) [ 0.000000] Command line: root=UUID=52e53386-fef1-4ac4-a4de-42b3065babec ro console=tty0 quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7040 [ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000003fff3000 [ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000003fff3040 [ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000003fff7bc0 [ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000003fff7b40 [ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003fff0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 262128 [ 0.000000] On node 0 totalpages: 262031 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1086 pages reserved [ 0.000000] DMA zone: 2857 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3527 pages used for memmap [ 0.000000] DMA32 zone: 254505 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000 [ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:90000000) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 257362 [ 0.000000] Kernel command line: root=UUID=52e53386-fef1-4ac4-a4de-42b3065babec ro console=tty0 quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 32.889260] Console: colour VGA+ 80x25 [ 32.889856] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 32.890778] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 32.890871] Checking aperture... [ 32.890874] CPU 0: aperture @ 1c80000000 size 32 MB [ 32.890876] Aperture too small (32 MB) [ 32.895535] No AGP bridge found [ 32.904728] Memory: 1019604k/1048512k available (2217k kernel code, 28520k reserved, 1162k data, 304k init) [ 32.981454] Calibrating delay using timer specific routine.. 4425.37 BogoMIPS (lpj=8850745) [ 32.981505] Security Framework v1.0.0 initialized [ 32.981512] SELinux: Disabled at boot. [ 32.981534] Mount-cache hash table entries: 256 [ 32.981666] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 32.981668] CPU: L2 Cache: 512K (64 bytes/line) [ 32.981671] CPU 0/0 -> Node 0 [ 32.981690] SMP alternatives: switching to UP code [ 32.981833] Freeing SMP alternatives: 28k freed [ 32.981933] Early unpacking initramfs... done [ 33.300140] ACPI: Core revision 20060707 [ 33.302348] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 33.345255] Using local APIC timer interrupts. [ 33.390472] result 12564476 [ 33.390474] Detected 12.564 MHz APIC timer. [ 33.393450] Brought up 1 CPUs [ 33.393484] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 33.393486] time.c: Detected 2211.344 MHz processor. [ 33.393731] Time: 10:12:15 Date: 05/10/107 [ 33.393766] NET: Registered protocol family 16 [ 33.393841] ACPI: bus type pci registered [ 33.393846] PCI: Using configuration type 1 [ 33.399589] ACPI: Interpreter enabled [ 33.399592] ACPI: Using IOAPIC for interrupt routing [ 33.400012] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 33.400016] PCI: Probing PCI hardware (bus 00) [ 33.400518] PCI: Transparent bridge - 0000:00:09.0 [ 33.400736] Boot video device is 0000:05:00.0 [ 33.400785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 33.453152] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 33.454705] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 33.454954] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 33.455202] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 33.455448] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 33.455695] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 33.455945] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 33.456192] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 33.456437] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 33.456686] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 33.456936] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 33.457184] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 33.457436] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 33.457687] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 33.457944] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 33.458202] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 33.458457] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 33.458748] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 33.459031] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 33.459315] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 33.459600] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 33.459813] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 33.460110] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 33.460406] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 33.460701] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 33.460998] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 33.461292] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 33.461604] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 33.461897] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 33.462192] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 33.462493] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 33.462795] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 33.463098] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 33.465204] Linux Plug and Play Support v0.97 (c) Adam Belay [ 33.465216] pnp: PnP ACPI init [ 33.469220] pnp: PnP ACPI: found 12 devices [ 33.469269] PCI: Using ACPI for IRQ routing [ 33.469273] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 33.469334] NET: Registered protocol family 8 [ 33.469336] NET: Registered protocol family 20 [ 33.469715] pnp: 00:00: ioport range 0x1000-0x107f could not be reserved [ 33.469718] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved [ 33.469720] pnp: 00:00: ioport range 0x1400-0x147f has been reserved [ 33.469723] pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved [ 33.469726] pnp: 00:00: ioport range 0x1800-0x187f has been reserved [ 33.469728] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved [ 33.469963] PCI: Bridge: 0000:00:09.0 [ 33.469964] IO window: disabled. [ 33.469967] MEM window: f2000000-f20fffff [ 33.469969] PREFETCH window: disabled. [ 33.469972] PCI: Bridge: 0000:00:0b.0 [ 33.469974] IO window: a000-afff [ 33.469976] MEM window: f0000000-f1ffffff [ 33.469979] PREFETCH window: 50000000-500fffff [ 33.469981] PCI: Bridge: 0000:00:0c.0 [ 33.469983] IO window: 9000-9fff [ 33.469985] MEM window: disabled. [ 33.469986] PREFETCH window: disabled. [ 33.469988] PCI: Bridge: 0000:00:0d.0 [ 33.469990] IO window: 8000-8fff [ 33.469992] MEM window: disabled. [ 33.469994] PREFETCH window: disabled. [ 33.469996] PCI: Bridge: 0000:00:0e.0 [ 33.469997] IO window: disabled. [ 33.470000] MEM window: e0000000-efffffff [ 33.470002] PREFETCH window: 50100000-501fffff [ 33.470009] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 33.470015] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 33.470020] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 33.470024] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 33.470029] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 33.470094] NET: Registered protocol family 2 [ 33.509461] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 33.509656] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 33.510911] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 33.511528] TCP: Hash tables configured (established 131072 bind 65536) [ 33.511531] TCP reno registered [ 33.521511] checking if image is initramfs... it is [ 34.169601] Freeing initrd memory: 8183k freed [ 34.174848] audit: initializing netlink socket (disabled) [ 34.174861] audit(1181470335.248:1): initialized [ 34.174983] VFS: Disk quotas dquot_6.5.1 [ 34.174997] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 34.175041] io scheduler noop registered [ 34.175043] io scheduler anticipatory registered [ 34.175045] io scheduler deadline registered [ 34.175055] io scheduler cfq registered (default) [ 34.193305] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 [ 34.193311] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 34.193316] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 [ 34.193322] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 34.193327] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 [ 34.193333] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 34.193337] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 [ 34.193344] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 34.193498] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 34.193513] assign_interrupt_mode Found MSI capability [ 34.193516] Allocate Port Service[0000:00:0b.0:pcie00] [ 34.193564] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 34.193578] assign_interrupt_mode Found MSI capability [ 34.193580] Allocate Port Service[0000:00:0c.0:pcie00] [ 34.193623] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 34.193637] assign_interrupt_mode Found MSI capability [ 34.193639] Allocate Port Service[0000:00:0d.0:pcie00] [ 34.193687] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 34.193700] assign_interrupt_mode Found MSI capability [ 34.193702] Allocate Port Service[0000:00:0e.0:pcie00] [ 34.212365] Real Time Clock Driver v1.12ac [ 34.212404] Linux agpgart interface v0.102 (c) Dave Jones [ 34.212406] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 34.212510] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 34.212622] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 34.212992] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 34.213144] mice: PS/2 mouse device common for all mice [ 34.213610] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 34.213793] input: Macintosh mouse button emulation as /class/input/input0 [ 34.213819] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 34.213822] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 34.213995] PNP: No PS/2 controller found. Probing ports directly. [ 34.723170] i8042.c: Can't read CTR while initializing i8042. [ 34.723202] i8042: probe of i8042 failed with error -5 [ 34.723370] TCP cubic registered [ 34.723379] NET: Registered protocol family 1 [ 34.723437] ACPI: (supports S0 S1 S4 S5) [ 34.723480] Magic number: 11:975:223 [ 34.723513] hash matches device ttyu7 [ 34.723522] hash matches device ttyra [ 34.723593] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 34.723665] Freeing unused kernel memory: 304k freed [ 35.898751] Capability LSM initialized [ 35.947144] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 35.969619] ACPI: Processor [CPU0] (supports 8 throttling states) [ 36.020701] md: linear personality registered for level -1 [ 36.023388] md: multipath personality registered for level -4 [ 36.025908] md: raid0 personality registered for level 0 [ 36.028829] md: raid1 personality registered for level 1 [ 36.031195] raid5: automatically using best checksumming function: generic_sse [ 36.049167] generic_sse: 7121.000 MB/sec [ 36.049170] raid5: using function: generic_sse (7121.000 MB/sec) [ 36.125165] raid6: int64x1 1852 MB/s [ 36.193154] raid6: int64x2 2718 MB/s [ 36.261149] raid6: int64x4 2863 MB/s [ 36.329169] raid6: int64x8 1967 MB/s [ 36.397140] raid6: sse2x1 2687 MB/s [ 36.465139] raid6: sse2x2 3775 MB/s [ 36.533124] raid6: sse2x4 4110 MB/s [ 36.533126] raid6: using algorithm sse2x4 (4110 MB/s) [ 36.533129] md: raid6 personality registered for level 6 [ 36.533130] md: raid5 personality registered for level 5 [ 36.533132] md: raid4 personality registered for level 4 [ 36.561316] md: raid10 personality registered for level 10 [ 36.900648] usbcore: registered new interface driver usbfs [ 36.900669] usbcore: registered new interface driver hub [ 36.900687] usbcore: registered new device driver usb [ 36.901399] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 36.901754] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 36.901761] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 36.901774] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 36.901777] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 36.901885] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 36.901900] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf2102000 [ 36.963160] usb usb1: configuration #1 chosen from 1 choice [ 36.963182] hub 1-0:1.0: USB hub found [ 36.963191] hub 1-0:1.0: 10 ports detected [ 36.990594] ieee1394: Initialized config rom entry `ip1394' [ 37.002042] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. [ 37.069399] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 37.069408] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 [ 37.069421] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 37.069423] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 37.069447] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 37.069472] ehci_hcd 0000:00:02.1: debug port 1 [ 37.069474] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 37.069484] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf2104000 [ 37.069488] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 37.069545] usb usb2: configuration #1 chosen from 1 choice [ 37.069566] hub 2-0:1.0: USB hub found [ 37.069571] hub 2-0:1.0: 10 ports detected [ 37.177420] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 [ 37.177440] NFORCE-CK804: chipset revision 162 [ 37.177442] NFORCE-CK804: not 100% native mode: will probe irqs later [ 37.177447] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller [ 37.177455] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 37.177463] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 37.177470] Probing IDE interface ide0... [ 37.916771] hda: PIONEER DVD-RW DVR-107D, ATAPI CD/DVD-ROM drive [ 38.028681] usb 1-7: new low speed USB device using ohci_hcd and address 2 [ 38.254917] usb 1-7: configuration #1 chosen from 1 choice [ 38.564596] usb 1-8: new low speed USB device using ohci_hcd and address 3 [ 38.588741] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 38.590263] Probing IDE interface ide1... [ 38.770837] usb 1-8: configuration #1 chosen from 1 choice [ 38.773892] usbcore: registered new interface driver hiddev [ 38.779891] input: Logitech Logitech USB Keyboard as /class/input/input1 [ 38.779906] input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-7 [ 38.796833] input: Logitech Logitech USB Keyboard as /class/input/input2 [ 38.796860] input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-7 [ 38.802825] input: Logitech USB Receiver as /class/input/input3 [ 38.802839] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-8 [ 38.802847] usbcore: registered new interface driver usbhid [ 38.802850] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 39.166101] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 39.166110] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 39.216976] SCSI subsystem initialized [ 39.222070] libata version 2.20 loaded. [ 39.223378] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f2006000-f20067ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 39.225608] sata_nv 0000:00:07.0: version 3.3 [ 39.226023] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 39.226031] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21 [ 39.226041] sata_nv 0000:00:07.0: Using ADMA mode [ 39.226056] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 39.226118] ata1: SATA max UDMA/133 cmd 0xffffc20000038480 ctl 0xffffc200000384a0 bmdma 0x000000000001d800 irq 21 [ 39.226155] ata2: SATA max UDMA/133 cmd 0xffffc20000038580 ctl 0xffffc200000385a0 bmdma 0x000000000001d808 irq 21 [ 39.226163] scsi0 : sata_nv [ 39.696498] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 39.704586] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 [ 39.704592] ata1.00: ATA-7: ST3250823AS, 3.02, max UDMA/133 [ 39.704594] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 39.712571] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 [ 39.712575] ata1.00: configured for UDMA/133 [ 39.712584] scsi1 : sata_nv [ 40.024364] ata2: SATA link down (SStatus 0 SControl 300) [ 40.024463] scsi 0:0:0:0: Direct-Access ATA ST3250823AS 3.02 PQ: 0 ANSI: 5 [ 40.024470] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 40.026170] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 40.026177] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 20 [ 40.026183] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 40.026191] forcedeth: using HIGHDMA [ 40.041321] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33) [ 40.041329] Uniform CD-ROM driver Revision: 3.20 [ 40.041369] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 40.041381] sda: Write Protect is off [ 40.041382] sda: Mode Sense: 00 3a 00 00 [ 40.041395] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.041447] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 40.041454] sda: Write Protect is off [ 40.041456] sda: Mode Sense: 00 3a 00 00 [ 40.041468] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.041473] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 40.106917] sd 0:0:0:0: Attached scsi disk sda [ 40.109805] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 40.406812] kjournald starting. Commit interval 5 seconds [ 40.406822] EXT3-fs: mounted filesystem with ordered data mode. [ 40.496460] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000fea56008bb293] [ 40.548735] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0 [ 50.425366] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 50.425407] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 50.445726] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 50.447777] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 50.824213] usbcore: registered new interface driver xpad [ 50.824218] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6 [ 50.841386] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 50.841394] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 [ 50.841399] rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com [ 50.925159] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 50.925168] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 50.925180] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 50.925209] sky2 0000:02:00.0: v1.13 addr 0xf1000000 irq 17 Yukon-EC (0xb6) rev 1 [ 50.925307] sky2 eth1: addr 00:0f:ea:88:ca:91 [ 50.945605] nvidia: module license 'NVIDIA' taints kernel. [ 51.210538] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 51.210548] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 51.210741] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9631 Thu Nov 9 17:35:27 PST 2006 [ 51.214678] input: PC Speaker as /class/input/input4 [ 51.242002] parport: PnPBIOS parport detected. [ 51.242042] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 51.307662] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel [ 51.307669] rt2500 EEPROM: 6 6 6 6 6 6 6 6 6 6 6 6 8 8 dBm Maximum [ 51.447674] irda_init() [ 51.447696] NET: Registered protocol family 23 [ 51.605094] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23 [ 51.605099] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 23 [ 51.605123] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 51.930465] intel8x0_measure_ac97_clock: measured 58710 usecs [ 51.930469] intel8x0: clocking to 46968 [ 52.067508] Probing IDE interface ide1... [ 52.614020] NET: Registered protocol family 17 [ 52.660533] lp0: using parport0 (interrupt-driven). [ 52.795482] Adding 497972k swap on /dev/disk/by-uuid/f5c76b0a-5558-446d-b38f-fab1113afbd0. Priority:-1 extents:1 across:497972k [ 53.185527] EXT3 FS on sda5, internal journal [ 55.248948] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 55.286838] NTFS volume version 3.1. [ 55.327493] Adding 497972k swap on /dev/disk/by-uuid/f5c76b0a-5558-446d-b38f-fab1113afbd0. Priority:-2 extents:1 across:497972k [ 57.215892] input: Power Button (FF) as /class/input/input5 [ 57.219678] ACPI: Power Button (FF) [PWRF] [ 57.244005] input: Power Button (CM) as /class/input/input6 [ 57.247741] ACPI: Power Button (CM) [PWRB] [ 57.261240] Using specific hotkey driver [ 57.289795] No dock devices found. [ 57.321686] ibm_acpi: ec object not found [ 57.417526] pcc_acpi: loading... [ 57.583775] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (version 2.00.00) [ 57.583817] powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz [ 57.583821] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 [ 57.583823] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 [ 57.583825] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa [ 57.583827] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 65.270754] sky2 eth1: enabling interface [ 65.272745] sky2 eth1: ram buffer 48K [ 65.404650] eth0: no link during initialization. [ 66.969041] sky2 eth1: Link is up at 100 Mbps, full duplex, flow control both [ 67.904216] ppdev: user-space parallel port driver [ 71.802456] NET: Registered protocol family 10 [ 71.802541] lo: Disabled Privacy Extensions [ 71.802594] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 77.881232] ra0: no IPv6 routers present [ 78.472042] eth1: no IPv6 routers present