[ 0.000000] Linux version 2.6.20-15-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] Command line: root=UUID=7cba4e85-5921-4d15-86db-e2e9db0647a9 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable) [ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524240) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f9210 [ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x07000528 MSFT 0x00000097) @ 0x000000007ffd0000 [ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x07000528 MSFT 0x00000097) @ 0x000000007ffd0200 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x07000528 MSFT 0x00000097) @ 0x000000007ffd0390 [ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x07000528 MSFT 0x00000097) @ 0x000000007ffde040 [ 0.000000] ACPI: DSDT (v001 1XXXX 1XXXX005 0x00000005 INTL 0x02002026) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000007ffd0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524240) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffd0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524240 [ 0.000000] On node 0 totalpages: 524143 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1086 pages reserved [ 0.000000] DMA zone: 2857 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7111 pages used for memmap [ 0.000000] DMA32 zone: 513033 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000 [ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515890 [ 0.000000] Kernel command line: root=UUID=7cba4e85-5921-4d15-86db-e2e9db0647a9 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 33.887424] Console: colour VGA+ 80x25 [ 33.888802] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 33.890854] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 33.891533] Checking aperture... [ 33.891537] CPU 0: aperture @ d0000000 size 128 MB [ 33.911956] Memory: 2052996k/2096960k available (2217k kernel code, 43576k reserved, 1162k data, 304k init) [ 33.991337] Calibrating delay using timer specific routine.. 4004.92 BogoMIPS (lpj=8009847) [ 33.991392] Security Framework v1.0.0 initialized [ 33.991398] SELinux: Disabled at boot. [ 33.991422] Mount-cache hash table entries: 256 [ 33.991561] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 33.991563] CPU: L2 Cache: 512K (64 bytes/line) [ 33.991566] CPU 0/0 -> Node 0 [ 33.991585] SMP alternatives: switching to UP code [ 33.991828] Early unpacking initramfs... done [ 34.318350] ACPI: Core revision 20060707 [ 34.318809] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 34.361614] Using local APIC timer interrupts. [ 34.411519] result 12500672 [ 34.411521] Detected 12.500 MHz APIC timer. [ 34.414591] Brought up 1 CPUs [ 34.414796] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 34.414798] time.c: Detected 2000.105 MHz processor. [ 34.415107] Time: 4:27:02 Date: 03/26/107 [ 34.415142] NET: Registered protocol family 16 [ 34.415218] ACPI: bus type pci registered [ 34.415224] PCI: Using configuration type 1 [ 34.421214] ACPI: Interpreter enabled [ 34.421217] ACPI: Using IOAPIC for interrupt routing [ 34.421873] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 34.421877] PCI: Probing PCI hardware (bus 00) [ 34.422586] PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON [ 34.422590] PCI: MSI-K8T-Neo2Fir, soundcard on [ 34.422745] Boot video device is 0000:01:00.0 [ 34.422781] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 34.447193] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 34.447412] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 34.447628] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 34.447849] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 34.448119] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 34.448336] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 34.448553] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 34.448770] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 34.448841] Linux Plug and Play Support v0.97 (c) Adam Belay [ 34.448856] pnp: PnP ACPI init [ 34.453607] pnp: PnP ACPI: found 14 devices [ 34.453662] PCI: Using ACPI for IRQ routing [ 34.453665] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 34.453741] NET: Registered protocol family 8 [ 34.453743] NET: Registered protocol family 20 [ 34.453794] agpgart: Detected AGP bridge 0 [ 34.459993] agpgart: AGP aperture is 128M @ 0xd0000000 [ 34.460654] pnp: 00:0a: ioport range 0x680-0x6ff has been reserved [ 34.460657] pnp: 00:0a: ioport range 0x295-0x296 has been reserved [ 34.460906] PCI: Bridge: 0000:00:01.0 [ 34.460908] IO window: disabled. [ 34.460912] MEM window: f9f00000-fbffffff [ 34.460915] PREFETCH window: e0000000-f8ffffff [ 34.460928] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 34.460989] NET: Registered protocol family 2 [ 34.498455] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 34.498775] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 34.501595] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 34.502279] TCP: Hash tables configured (established 262144 bind 65536) [ 34.502282] TCP reno registered [ 34.510505] checking if image is initramfs... it is [ 35.120973] Freeing initrd memory: 7302k freed [ 35.126224] audit: initializing netlink socket (disabled) [ 35.126236] audit(1177561623.196:1): initialized [ 35.126368] VFS: Disk quotas dquot_6.5.1 [ 35.126384] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 35.126430] io scheduler noop registered [ 35.126432] io scheduler anticipatory registered [ 35.126434] io scheduler deadline registered [ 35.126445] io scheduler cfq registered (default) [ 35.147404] Real Time Clock Driver v1.12ac [ 35.147444] Linux agpgart interface v0.102 (c) Dave Jones [ 35.147447] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 35.147548] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 35.148035] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 35.148206] mice: PS/2 mouse device common for all mice [ 35.148688] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 35.148873] input: Macintosh mouse button emulation as /class/input/input0 [ 35.148903] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 35.148907] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 35.149196] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 35.149451] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 35.149454] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 35.149600] TCP cubic registered [ 35.149608] NET: Registered protocol family 1 [ 35.149717] ACPI: (supports S0 S1 S3 S4 S5) [ 35.149755] Magic number: 3:289:465 [ 35.149865] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 35.149944] Freeing unused kernel memory: 304k freed [ 35.170383] input: AT Translated Set 2 keyboard as /class/input/input1 [ 36.337111] Capability LSM initialized [ 36.370415] ACPI: Processor [CPU1] (supports 16 throttling states) [ 36.370424] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 36.838762] SCSI subsystem initialized [ 36.843855] libata version 2.20 loaded. [ 36.845127] pata_it821x: controller in smart mode. [ 36.845147] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 36.845163] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 36.845210] ata1: PATA max MWDMA2 cmd 0x000000000001e800 ctl 0x000000000001e402 bmdma 0x000000000001d400 irq 18 [ 36.845239] ata2: PATA max MWDMA2 cmd 0x000000000001e000 ctl 0x000000000001d802 bmdma 0x000000000001d408 irq 18 [ 36.845254] scsi0 : pata_it821x [ 36.869358] usbcore: registered new interface driver usbfs [ 36.869384] usbcore: registered new interface driver hub [ 36.869403] usbcore: registered new device driver usb [ 36.920616] USB Universal Host Controller Interface driver v3.0 [ 36.995998] Floppy drive(s): fd0 is 1.44M [ 37.037485] FDC 0 is a post-1991 82077 [ 67.978408] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [ 99.629759] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [ 99.629765] ata1.00: limiting speed to UDMA7:PIO5 [ 131.289096] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [ 162.916378] scsi1 : pata_it821x [ 163.072831] r8169 Gigabit Ethernet driver 2.2LK loaded [ 163.072853] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 163.073164] eth0: RTL8169s/8110s at 0xffffc20000004c00, 00:11:09:db:8d:d4, IRQ 16 [ 163.080682] VP_IDE: IDE controller at PCI slot 0000:00:0f.0 [ 163.080704] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 163.080716] VP_IDE: chipset revision 6 [ 163.080718] VP_IDE: not 100% native mode: will probe irqs later [ 163.080727] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0 [ 163.080734] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio [ 163.080745] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA [ 163.080752] Probing IDE interface ide0... [ 163.495318] hda: SAMSUNG SP2514N, ATA DISK drive [ 164.166171] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 164.174703] Probing IDE interface ide1... [ 165.036368] hdc: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive [ 165.818865] hdd: LITE-ON DVD+RW LDW-401S, ATAPI CD/DVD-ROM drive [ 165.875316] ide1 at 0x170-0x177,0x376 on irq 15 [ 165.876241] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 165.876253] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 165.876475] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 165.876502] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c800 [ 165.877026] usb usb1: configuration #1 chosen from 1 choice [ 165.877197] hub 1-0:1.0: USB hub found [ 165.877206] hub 1-0:1.0: 2 ports detected [ 165.883038] hda: max request size: 512KiB [ 165.895729] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) [ 165.896501] hda: cache flushes supported [ 165.896545] hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11<6>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 [ 165.978601] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 165.978625] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 165.978646] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c400 [ 165.978731] usb usb2: configuration #1 chosen from 1 choice [ 165.978751] hub 2-0:1.0: USB hub found [ 165.978759] hub 2-0:1.0: 2 ports detected [ 165.984580] hda12 hda13 hda14 hda15 hda16 > [ 166.055179] hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) [ 166.055186] Uniform CD-ROM driver Revision: 3.20 [ 166.057261] hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 166.082435] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 [ 166.082447] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 166.082473] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 166.082494] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000 [ 166.082598] usb usb3: configuration #1 chosen from 1 choice [ 166.082624] hub 3-0:1.0: USB hub found [ 166.082630] hub 3-0:1.0: 2 ports detected [ 166.186179] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 166.186191] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 166.186213] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 166.186234] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000b800 [ 166.186325] usb usb4: configuration #1 chosen from 1 choice [ 166.186350] hub 4-0:1.0: USB hub found [ 166.186355] hub 4-0:1.0: 2 ports detected [ 166.290064] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 166.290079] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 166.290105] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 166.290140] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9edf800 [ 166.290147] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 166.290227] usb usb5: configuration #1 chosen from 1 choice [ 166.290249] hub 5-0:1.0: USB hub found [ 166.290256] hub 5-0:1.0: 8 ports detected [ 166.561389] Attempting manual resume [ 166.561393] swsusp: Resume From Partition 3:2 [ 166.561395] PM: Checking swsusp image. [ 166.561562] PM: Resume from disk failed. [ 166.589262] kjournald starting. Commit interval 5 seconds [ 166.589272] EXT3-fs: mounted filesystem with ordered data mode. [ 167.535488] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 167.739135] usb 4-1: configuration #1 chosen from 1 choice [ 169.118769] r8169: eth0: link up [ 170.286869] NET: Registered protocol family 17 [ 171.170669] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 171.438673] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 171.458921] input: PC Speaker as /class/input/input2 [ 171.585121] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3A11 [ 171.585136] usbcore: registered new interface driver usblp [ 171.585139] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 171.687375] nvidia: module license 'NVIDIA' taints kernel. [ 171.970074] parport: PnPBIOS parport detected. [ 171.970114] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 172.092001] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 [ 172.106479] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 172.106595] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9631 Thu Nov 9 17:35:27 PST 2006 [ 172.134480] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 [ 172.134619] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 172.754768] fuse init (API version 7.8) [ 172.773260] lp0: using parport0 (interrupt-driven). [ 172.814884] Adding 4000176k swap on /dev/disk/by-uuid/656b8383-43e2-4446-bb5a-91ac7561019b. Priority:-1 extents:1 across:4000176k [ 173.028176] EXT3 FS on hda1, internal journal [ 173.807020] kjournald starting. Commit interval 5 seconds [ 173.807150] EXT3 FS on hda3, internal journal [ 173.807155] EXT3-fs: mounted filesystem with ordered data mode. [ 173.832050] kjournald starting. Commit interval 5 seconds [ 173.832183] EXT3 FS on hda9, internal journal [ 173.832187] EXT3-fs: mounted filesystem with ordered data mode. [ 173.845271] kjournald starting. Commit interval 5 seconds [ 173.845375] EXT3 FS on hda8, internal journal [ 173.845379] EXT3-fs: mounted filesystem with ordered data mode. [ 173.882346] kjournald starting. Commit interval 5 seconds [ 173.882450] EXT3 FS on hda12, internal journal [ 173.882454] EXT3-fs: mounted filesystem with ordered data mode. [ 173.914801] kjournald starting. Commit interval 5 seconds [ 173.914910] EXT3 FS on hda13, internal journal [ 173.914914] EXT3-fs: mounted filesystem with ordered data mode. [ 173.951782] kjournald starting. Commit interval 5 seconds [ 173.951926] EXT3 FS on hda16, internal journal [ 173.951930] EXT3-fs: mounted filesystem with ordered data mode. [ 173.970029] kjournald starting. Commit interval 5 seconds [ 173.970155] EXT3 FS on hda5, internal journal [ 173.970159] EXT3-fs: mounted filesystem with ordered data mode. [ 173.986190] kjournald starting. Commit interval 5 seconds [ 173.986297] EXT3 FS on hda7, internal journal [ 173.986301] EXT3-fs: mounted filesystem with ordered data mode. [ 174.003706] kjournald starting. Commit interval 5 seconds [ 174.003808] EXT3 FS on hda6, internal journal [ 174.003812] EXT3-fs: mounted filesystem with ordered data mode. [ 174.042369] kjournald starting. Commit interval 5 seconds [ 174.067047] EXT3 FS on hda15, internal journal [ 174.067051] EXT3-fs: mounted filesystem with ordered data mode. [ 174.099611] kjournald starting. Commit interval 5 seconds [ 174.182886] EXT3 FS on hda10, internal journal [ 174.182894] EXT3-fs: mounted filesystem with ordered data mode. [ 174.209270] kjournald starting. Commit interval 5 seconds [ 174.220619] EXT3 FS on hda11, internal journal [ 174.220626] EXT3-fs: mounted filesystem with ordered data mode. [ 174.258072] kjournald starting. Commit interval 5 seconds [ 174.381931] EXT3 FS on hda14, internal journal [ 174.381939] EXT3-fs: mounted filesystem with ordered data mode. [ 183.428238] Using specific hotkey driver [ 183.486712] No dock devices found. [ 183.520472] ibm_acpi: ec object not found [ 183.571146] input: Power Button (FF) as /class/input/input4 [ 183.574972] ACPI: Power Button (FF) [PWRF] [ 183.600641] input: Sleep Button (CM) as /class/input/input5 [ 183.604450] ACPI: Sleep Button (CM) [SLPB] [ 183.630218] input: Power Button (CM) as /class/input/input6 [ 183.633988] ACPI: Power Button (CM) [PWRB] [ 183.774015] pcc_acpi: loading... [ 183.935726] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00) [ 183.935767] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 [ 183.935770] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 [ 183.935772] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 188.357531] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 188.357811] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 188.358016] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 188.779132] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 1:00.0] forgot to specify physical device; fix it! [ 188.781778] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 1:00.0] forgot to specify physical device; fix it! [ 188.784321] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 1:00.0] forgot to specify physical device; fix it! [ 189.450799] ppdev: user-space parallel port driver [ 190.292599] Bluetooth: Core ver 2.11 [ 190.293001] NET: Registered protocol family 31 [ 190.293004] Bluetooth: HCI device and connection manager initialized [ 190.293007] Bluetooth: HCI socket layer initialized [ 190.338004] Bluetooth: L2CAP ver 2.8 [ 190.338008] Bluetooth: L2CAP socket layer initialized [ 190.460358] Bluetooth: RFCOMM socket layer initialized [ 190.460371] Bluetooth: RFCOMM TTY layer initialized [ 190.460373] Bluetooth: RFCOMM ver 1.8 [ 194.565148] NET: Registered protocol family 10 [ 194.565229] lo: Disabled Privacy Extensions [ 199.849559] eth0: no IPv6 routers present [40795.969167] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [40795.969389] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [40795.969580] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [41114.454794] Losing some ticks... checking if CPU frequency changed. [41190.479416] ACPI: PCI interrupt for device 0000:00:07.0 disabled [41204.058442] pata_it821x: controller in smart mode. [41204.058517] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18 [41204.058650] ata3: PATA max MWDMA2 cmd 0x000000000001e800 ctl 0x000000000001e402 bmdma 0x000000000001d400 irq 18 [41204.058790] ata4: PATA max MWDMA2 cmd 0x000000000001e000 ctl 0x000000000001d802 bmdma 0x000000000001d408 irq 18 [41204.058917] scsi2 : pata_it821x [41220.746957] ata3.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [41237.186054] ata3.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [41237.186059] ata3.00: limiting speed to UDMA7:PIO5 [41255.357391] ata3.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [41271.790447] scsi3 : pata_it821x [41456.703630] ISO 9660 Extensions: Microsoft Joliet Level 3 [41456.721174] ISO 9660 Extensions: RRIP_1991A [41550.218449] ISO 9660 Extensions: Microsoft Joliet Level 3 [41550.231869] ISO 9660 Extensions: RRIP_1991A [41845.846704] metacity[11903]: segfault at 0000000000000058 rip 00000000004189c5 rsp 00007fff909a7630 error 4