[ 0.000000] Linux version 2.6.20-15-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] Command line: root=UUID=7a5f65d0-b4e7-48f1-bcf3-98b8e355af06 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003beb0000 (usable) [ 0.000000] BIOS-e820: 000000003beb0000 - 000000003beb8000 (ACPI data) [ 0.000000] BIOS-e820: 000000003beb8000 - 000000003bf00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bf00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 245424) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP (v000 GATEWA ) @ 0x00000000000f8190 [ 0.000000] ACPI: RSDT (v001 GATEWA M300 0x20060124 LTP 0x00000000) @ 0x000000003beb37c8 [ 0.000000] ACPI: FADT (v001 GATEWA M300 0x20060124 PTL 0x0000005f) @ 0x000000003beb7dde [ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x20060124 LTP 0x00000001) @ 0x000000003beb7e52 [ 0.000000] ACPI: MADT (v001 GATEWA M300 0x20060124 LTP 0x00000000) @ 0x000000003beb7f6a [ 0.000000] ACPI: MCFG (v001 GATEWA M300 0x20060124 LTP 0x00000000) @ 0x000000003beb7fc4 [ 0.000000] ACPI: DSDT (v001 GATEWA M300 0x20060124 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003beb0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 245424) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003beb0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 245424 [ 0.000000] On node 0 totalpages: 245327 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1085 pages reserved [ 0.000000] DMA zone: 2858 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3299 pages used for memmap [ 0.000000] DMA32 zone: 238029 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000ce000 [ 0.000000] Nosave address range: 00000000000ce000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 240887 [ 0.000000] Kernel command line: root=UUID=7a5f65d0-b4e7-48f1-bcf3-98b8e355af06 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 13.767806] Console: colour VGA+ 80x25 [ 13.769055] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 13.769867] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 13.769963] Checking aperture... [ 13.769967] CPU 0: aperture @ 192000000 size 32 MB [ 13.769969] Aperture too small (32 MB) [ 13.781686] No AGP bridge found [ 13.797383] Memory: 955056k/981696k available (2217k kernel code, 26252k reserved, 1162k data, 304k init) [ 13.876764] Calibrating delay using timer specific routine.. 4391.74 BogoMIPS (lpj=8783490) [ 13.876832] Security Framework v1.0.0 initialized [ 13.876840] SELinux: Disabled at boot. [ 13.876867] Mount-cache hash table entries: 256 [ 13.877066] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 13.877068] CPU: L2 Cache: 1024K (64 bytes/line) [ 13.877071] CPU 0/0 -> Node 0 [ 13.877095] SMP alternatives: switching to UP code [ 13.877502] Freeing SMP alternatives: 24k freed [ 13.877623] Early unpacking initramfs... done [ 14.168251] ACPI: Core revision 20060707 [ 14.168562] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 14.213027] Using local APIC timer interrupts. [ 14.258539] result 12464216 [ 14.258540] Detected 12.464 MHz APIC timer. [ 14.260181] Brought up 1 CPUs [ 14.260226] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 14.260228] time.c: Detected 2193.702 MHz processor. [ 14.260578] Time: 0:10:11 Date: 03/20/107 [ 14.260625] NET: Registered protocol family 16 [ 14.260727] ACPI: bus type pci registered [ 14.260734] PCI: Using configuration type 1 [ 14.262461] ACPI: Interpreter enabled [ 14.262464] ACPI: Using IOAPIC for interrupt routing [ 14.263110] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 14.263116] PCI: Probing PCI hardware (bus 00) [ 14.264796] Boot video device is 0000:01:05.0 [ 14.265427] PCI: Transparent bridge - 0000:00:14.4 [ 14.265498] PCI: Bus #06 (-#09) is hidden behind transparent bridge #05 (-#06) (try 'pci=assign-busses') [ 14.265500] Please report the result to linux-kernel to fix this permanently [ 14.265529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 14.267618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 14.268636] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 14.268833] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 14.269026] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 14.269227] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 14.269426] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 14.269622] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 14.269815] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 14.270008] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 14.270202] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. [ 14.270789] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 14.271067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 14.271418] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.271431] pnp: PnP ACPI init [ 14.273925] pnp: PnP ACPI: found 10 devices [ 14.273981] PCI: Using ACPI for IRQ routing [ 14.273983] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 14.274093] NET: Registered protocol family 8 [ 14.274094] NET: Registered protocol family 20 [ 14.274356] pnp: 00:09: ioport range 0x1080-0x1080 has been reserved [ 14.274359] pnp: 00:09: ioport range 0x220-0x22f has been reserved [ 14.274361] pnp: 00:09: ioport range 0x40b-0x40b has been reserved [ 14.274363] pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 14.274635] PCI: Bridge: 0000:00:01.0 [ 14.274638] IO window: 9000-9fff [ 14.274641] MEM window: d0100000-d01fffff [ 14.274643] PREFETCH window: d4000000-d7ffffff [ 14.274646] PCI: Bridge: 0000:00:06.0 [ 14.274648] IO window: a000-afff [ 14.274651] MEM window: d0200000-d02fffff [ 14.274653] PREFETCH window: disabled. [ 14.274662] PCI: Bus 6, cardbus bridge: 0000:05:09.0 [ 14.274664] IO window: 0000b400-0000b4ff [ 14.274669] IO window: 0000b800-0000b8ff [ 14.274675] PREFETCH window: 50000000-53ffffff [ 14.274681] MEM window: 54000000-57ffffff [ 14.274686] PCI: Bridge: 0000:00:14.4 [ 14.274689] IO window: b000-bfff [ 14.274695] MEM window: d0300000-d03fffff [ 14.274699] PREFETCH window: 50000000-53ffffff [ 14.274719] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 14.274745] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 14.274752] PCI: Setting latency timer of device 0000:05:09.0 to 64 [ 14.274825] NET: Registered protocol family 2 [ 14.300157] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 14.300566] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 14.302978] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 14.304231] TCP: Hash tables configured (established 131072 bind 65536) [ 14.304234] TCP reno registered [ 14.316189] checking if image is initramfs... it is [ 14.850635] Freeing initrd memory: 6825k freed [ 14.859740] audit: initializing netlink socket (disabled) [ 14.859756] audit(1177027811.056:1): initialized [ 14.859922] VFS: Disk quotas dquot_6.5.1 [ 14.859939] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 14.859993] io scheduler noop registered [ 14.859995] io scheduler anticipatory registered [ 14.859997] io scheduler deadline registered [ 14.860008] io scheduler cfq registered (default) [ 15.514201] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 15.514221] assign_interrupt_mode Found MSI capability [ 15.514225] Allocate Port Service[0000:00:06.0:pcie00] [ 15.535448] Real Time Clock Driver v1.12ac [ 15.535494] Linux agpgart interface v0.102 (c) Dave Jones [ 15.535497] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 15.535989] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 15.535997] ACPI: PCI interrupt for device 0000:00:14.6 disabled [ 15.536067] mice: PS/2 mouse device common for all mice [ 15.536596] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 15.536867] input: Macintosh mouse button emulation as /class/input/input0 [ 15.536898] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 15.536901] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 15.537181] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 15.540654] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 15.540660] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 15.540759] TCP cubic registered [ 15.540767] NET: Registered protocol family 1 [ 15.540906] ACPI: (supports S0 S3 S4 S5) [ 15.540947] Magic number: 3:103:153 [ 15.541004] hash matches device ttyp7 [ 15.541084] hash matches device 0000:00:14.6 [ 15.541089] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 15.541212] Freeing unused kernel memory: 304k freed [ 15.569556] input: AT Translated Set 2 keyboard as /class/input/input1 [ 16.713028] Capability LSM initialized [ 16.742963] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 16.742969] ACPI: Processor [CPU0] (supports 8 throttling states) [ 16.744234] ACPI: Thermal Zone [THRM] (62 C) [ 17.180869] usbcore: registered new interface driver usbfs [ 17.180893] usbcore: registered new interface driver hub [ 17.180914] usbcore: registered new device driver usb [ 17.181531] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 17.181573] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 17.181589] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 17.181793] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 17.181814] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0000000 [ 17.220367] SCSI subsystem initialized [ 17.225377] libata version 2.20 loaded. [ 17.259607] usb usb1: configuration #1 chosen from 1 choice [ 17.259634] hub 1-0:1.0: USB hub found [ 17.259648] hub 1-0:1.0: 4 ports detected [ 17.343929] ieee1394: Initialized config rom entry `ip1394' [ 17.363077] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 17.363099] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 17.363125] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 17.363143] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0001000 [ 17.422974] usb usb2: configuration #1 chosen from 1 choice [ 17.423001] hub 2-0:1.0: USB hub found [ 17.423015] hub 2-0:1.0: 4 ports detected [ 17.527301] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 17.527319] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 17.527345] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 17.527404] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0002000 [ 17.527416] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 17.527510] usb usb3: configuration #1 chosen from 1 choice [ 17.527537] hub 3-0:1.0: USB hub found [ 17.527545] hub 3-0:1.0: 8 ports detected [ 17.632856] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 17.632876] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.632888] ATIIXP: chipset revision 128 [ 17.632891] ATIIXP: not 100% native mode: will probe irqs later [ 17.632900] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio [ 17.632914] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio [ 17.632923] Probing IDE interface ide0... [ 17.918405] hda: ST980829A, ATA DISK drive [ 18.173551] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 18.382250] usb 2-1: configuration #1 chosen from 1 choice [ 18.393134] usbcore: registered new interface driver hiddev [ 18.398392] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 [ 18.398500] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-1 [ 18.398513] usbcore: registered new interface driver usbhid [ 18.398516] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 18.589227] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 18.591616] Probing IDE interface ide1... [ 19.324046] hdc: PHILIPS DVD+/-RW SDVD8820, ATAPI CD/DVD-ROM drive [ 20.012299] ide1 at 0x170-0x177,0x376 on irq 15 [ 20.032008] ACPI: PCI Interrupt 0000:05:09.2[C] -> GSI 21 (level, low) -> IRQ 21 [ 20.082452] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[d0306800-d0306fff] Max Packet=[2048] IR/IT contexts=[4/8] [ 20.088375] hda: max request size: 512KiB [ 20.095618] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) [ 20.095807] hda: cache flushes supported [ 20.095859] hda: hda1 hda2 < hda5 > [ 20.160312] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 20.160321] Uniform CD-ROM driver Revision: 3.20 [ 20.347252] Attempting manual resume [ 20.347256] swsusp: Resume From Partition 3:5 [ 20.347257] PM: Checking swsusp image. [ 20.347441] PM: Resume from disk failed. [ 20.391646] kjournald starting. Commit interval 5 seconds [ 20.391657] EXT3-fs: mounted filesystem with ordered data mode. [ 31.214901] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 31.363350] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 31.367280] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.608307] Yenta: CardBus bridge found at 0000:05:09.0 [107b:0300] [ 31.608333] Yenta: Enabling burst memory read transactions [ 31.608338] Yenta: Using CSCINT to route CSC interrupts to PCI [ 31.608340] Yenta: Routing CardBus interrupts to PCI [ 31.608346] Yenta TI: socket 0000:05:09.0, mfunc 0x01ac1b22, devctl 0x64 [ 31.647704] input: PC Speaker as /class/input/input3 [ 31.843504] Yenta: ISA IRQ mask 0x0ef8, PCI irq 23 [ 31.843510] Socket status: 30000006 [ 31.843513] Yenta: Raising subordinate bus# of parent bus (#05) from #06 to #09 [ 31.843521] pcmcia: parent PCI bridge I/O window: 0xb000 - 0xbfff [ 31.843524] pcmcia: parent PCI bridge Memory window: 0xd0300000 - 0xd03fffff [ 31.843527] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 31.843907] ACPI: PCI Interrupt 0000:05:09.3[A] -> GSI 23 (level, low) -> IRQ 23 [ 31.872091] sdhci: Secure Digital Host Controller Interface driver [ 31.872095] sdhci: Copyright(c) Pierre Ossman [ 31.872139] sdhci: SDHCI controller found at 0000:05:09.4 [104c:8034] (rev 0) [ 31.872163] ACPI: PCI Interrupt 0000:05:09.4[A] -> GSI 23 (level, low) -> IRQ 23 [ 31.872238] mmc0: SDHCI at 0xd0307400 irq 23 DMA [ 31.876295] mmc1: SDHCI at 0xd0307000 irq 23 DMA [ 31.876337] mmc2: SDHCI at 0xd0306400 irq 23 DMA [ 31.915421] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 31.915438] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 31.915474] sky2 0000:03:00.0: v1.13 addr 0xd0200000 irq 18 Yukon-FE (0xb7) rev 1 [ 31.915592] sky2 eth0: addr 00:e0:b8:b6:f7:2d [ 32.084999] sky2 eth0: enabling interface [ 32.087208] sky2 eth0: ram buffer 4K [ 32.154600] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x23aeb3, caps: 0xa04713/0x10008 [ 32.189315] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 32.213937] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 32.321867] MC'97 0 converters and GPIO not ready (0x1) [ 32.322589] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 32.492545] fuse init (API version 7.8) [ 32.547942] lp: driver loaded but no devices found [ 32.606843] Adding 2819368k swap on /dev/disk/by-uuid/49ba66df-c9fe-4c81-9be1-9aae8ab1bd77. Priority:-1 extents:1 across:2819368k [ 32.754872] EXT3 FS on hda1, internal journal [ 33.228844] NET: Registered protocol family 17 [ 36.450717] ieee80211_crypt: registered algorithm 'NULL' [ 36.455845] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 36.455850] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 39.283059] ibm_acpi: ec object not found [ 39.313507] Using specific hotkey driver [ 39.375167] ACPI: AC Adapter [ACAD] (on-line) [ 39.405657] input: Power Button (FF) as /class/input/input5 [ 39.409835] ACPI: Power Button (FF) [PWRF] [ 39.432027] input: Power Button (CM) as /class/input/input6 [ 39.436172] ACPI: Power Button (CM) [PWRB] [ 39.458483] input: Sleep Button (CM) as /class/input/input7 [ 39.462627] ACPI: Sleep Button (CM) [SLPB] [ 39.484838] input: Lid Switch as /class/input/input8 [ 39.488978] ACPI: Lid Switch [LID] [ 39.511705] ACPI: Battery Slot [BAT1] (battery present) [ 39.520344] No dock devices found. [ 39.539414] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 39.577588] pcc_acpi: loading... [ 39.791412] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-40 processors (version 2.00.00) [ 39.791467] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x4 [ 39.791470] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 [ 39.791472] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8 [ 39.791474] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0xa [ 39.791476] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x16 [ 42.761839] ppdev: user-space parallel port driver [ 44.318224] Bluetooth: Core ver 2.11 [ 44.318283] NET: Registered protocol family 31 [ 44.318285] Bluetooth: HCI device and connection manager initialized [ 44.318288] Bluetooth: HCI socket layer initialized [ 44.355427] Bluetooth: L2CAP ver 2.8 [ 44.355432] Bluetooth: L2CAP socket layer initialized [ 44.408823] Bluetooth: RFCOMM socket layer initialized [ 44.408838] Bluetooth: RFCOMM TTY layer initialized [ 44.408840] Bluetooth: RFCOMM ver 1.8 [ 60.757963] NET: Registered protocol family 10 [ 60.758067] lo: Disabled Privacy Extensions [ 60.758131] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 65.970277] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 66.314078] ISO 9660 Extensions: RRIP_1991A