[ 0.000000] Linux version 2.6.20-12-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed Mar 21 19:34:23 UTC 2007 (Ubuntu 2.6.20-12.20-generic) [ 0.000000] Command line: root=UUID=c509676d-64f7-43b9-adfa-8f8f98af8a57 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed0000 (usable) [ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fedf000 - 000000007ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 523984) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP (v002 LENOVO ) @ 0x00000000000f67d0 [ 0.000000] ACPI: XSDT (v001 LENOVO TP-7I 0x00001040 LTP 0x00000000) @ 0x000000007fed1496 [ 0.000000] ACPI: FADT (v003 LENOVO TP-7I 0x00001040 LNVO 0x00000001) @ 0x000000007fed1600 [ 0.000000] ACPI: SSDT (v001 LENOVO TP-7I 0x00001040 MSFT 0x0100000e) @ 0x000000007fed17b4 [ 0.000000] ACPI: ECDT (v001 LENOVO TP-7I 0x00001040 LNVO 0x00000001) @ 0x000000007fedec51 [ 0.000000] ACPI: TCPA (v002 LENOVO TP-7I 0x00001040 LNVO 0x00000001) @ 0x000000007fedeca3 [ 0.000000] ACPI: MADT (v001 LENOVO TP-7I 0x00001040 LNVO 0x00000001) @ 0x000000007fedecd5 [ 0.000000] ACPI: MCFG (v001 LENOVO TP-7I 0x00001040 LNVO 0x00000001) @ 0x000000007feded3d [ 0.000000] ACPI: HPET (v001 LENOVO TP-7I 0x00001040 LNVO 0x00000001) @ 0x000000007feded79 [ 0.000000] ACPI: SLIC (v001 LENOVO TP-7I 0x00001040 LTP 0x00000000) @ 0x000000007fedee62 [ 0.000000] ACPI: BOOT (v001 LENOVO TP-7I 0x00001040 LTP 0x00000001) @ 0x000000007fedefd8 [ 0.000000] ACPI: SSDT (v001 LENOVO TP-7I 0x00001040 INTL 0x20050513) @ 0x000000007fef2697 [ 0.000000] ACPI: SSDT (v001 LENOVO TP-7I 0x00001040 INTL 0x20050513) @ 0x000000007fef28f6 [ 0.000000] ACPI: SSDT (v001 LENOVO TP-7I 0x00001040 INTL 0x20050513) @ 0x000000007fef299c [ 0.000000] ACPI: SSDT (v001 LENOVO TP-7I 0x00001040 INTL 0x20050513) @ 0x000000007fef2e93 [ 0.000000] ACPI: DSDT (v001 LENOVO TP-7I 0x00001040 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fed0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 523984) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fed0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 523984 [ 0.000000] On node 0 totalpages: 523887 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1082 pages reserved [ 0.000000] DMA zone: 2861 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7107 pages used for memmap [ 0.000000] DMA32 zone: 512781 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000d2000 [ 0.000000] Nosave address range: 00000000000d2000 - 00000000000d4000 [ 0.000000] Nosave address range: 00000000000d4000 - 00000000000dc000 [ 0.000000] Nosave address range: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515642 [ 0.000000] Kernel command line: root=UUID=c509676d-64f7-43b9-adfa-8f8f98af8a57 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 21.358520] Console: colour VGA+ 80x25 [ 21.359777] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 21.360868] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 21.361019] Checking aperture... [ 21.361033] Calgary: detecting Calgary via BIOS EBDA area [ 21.361035] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 21.386627] Memory: 2052060k/2095936k available (2213k kernel code, 43488k reserved, 1158k data, 304k init) [ 21.466000] Calibrating delay using timer specific routine.. 3995.73 BogoMIPS (lpj=7991472) [ 21.466058] Security Framework v1.0.0 initialized [ 21.466064] SELinux: Disabled at boot. [ 21.466086] Mount-cache hash table entries: 256 [ 21.466246] CPU: L1 I cache: 32K, L1 D cache: 32K [ 21.466248] CPU: L2 cache: 4096K [ 21.466251] CPU 0/0 -> Node 0 [ 21.466252] using mwait in idle threads. [ 21.466254] CPU: Physical Processor ID: 0 [ 21.466256] CPU: Processor Core ID: 0 [ 21.466263] CPU0: Thermal monitoring enabled (TM2) [ 21.466274] SMP alternatives: switching to UP code [ 21.466541] Early unpacking initramfs... done [ 21.803844] ACPI: Core revision 20060707 [ 21.804127] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 21.863403] Using local APIC timer interrupts. [ 21.913504] result 10390622 [ 21.913505] Detected 10.390 MHz APIC timer. [ 21.913910] SMP alternatives: switching to SMP code [ 21.914060] Booting processor 1/2 APIC 0x1 [ 21.925549] Initializing CPU#1 [ 22.002009] Calibrating delay using timer specific routine.. 3990.11 BogoMIPS (lpj=7980238) [ 22.002016] CPU: L1 I cache: 32K, L1 D cache: 32K [ 22.002018] CPU: L2 cache: 4096K [ 22.002020] CPU 1/1 -> Node 0 [ 22.002021] CPU: Physical Processor ID: 0 [ 22.002023] CPU: Processor Core ID: 1 [ 22.002028] CPU1: Thermal monitoring enabled (TM2) [ 22.002525] Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 22.006005] CPU 1: Syncing TSC to CPU 0. [ 22.005873] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 960 cycles) [ 22.005892] Brought up 2 CPUs [ 22.005944] time.c: Using 14.318180 MHz WALL HPET GTOD HPET timer. [ 22.005946] time.c: Detected 1995.002 MHz processor. [ 22.267897] migration_cost=33 [ 22.268225] Time: 8:30:11 Date: 03/12/107 [ 22.268258] NET: Registered protocol family 16 [ 22.268331] ACPI: bus type pci registered [ 22.268338] PCI: Using configuration type 1 [ 22.278897] ACPI: Interpreter enabled [ 22.278900] ACPI: Using IOAPIC for interrupt routing [ 22.279682] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 22.280233] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 22.280786] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 22.281335] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 22.281912] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 22.282464] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 22.283013] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 22.283561] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 22.283915] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 22.283919] PCI: Probing PCI hardware (bus 00) [ 22.285721] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 22.285725] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 22.286055] Boot video device is 0000:01:00.0 [ 22.286987] PCI: Transparent bridge - 0000:00:1e.0 [ 22.287147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 22.292153] ACPI: Power Resource [PUBS] (on) [ 22.293196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 22.293510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 22.293687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 22.293855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 22.294061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 22.294267] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 22.296246] Linux Plug and Play Support v0.97 (c) Adam Belay [ 22.296254] pnp: PnP ACPI init [ 22.300868] pnp: PnP ACPI: found 12 devices [ 22.300915] PCI: Using ACPI for IRQ routing [ 22.300917] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 22.301070] NET: Registered protocol family 8 [ 22.301072] NET: Registered protocol family 20 [ 22.301085] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 22.301088] hpet0: 3 64-bit timers, 14318180 Hz [ 22.302109] PCI-GART: No AMD northbridge found. [ 22.303082] PCI: Bridge: 0000:00:01.0 [ 22.303084] IO window: 2000-2fff [ 22.303088] MEM window: ee100000-ee1fffff [ 22.303091] PREFETCH window: d0000000-dfffffff [ 22.303095] PCI: Bridge: 0000:00:1c.0 [ 22.303098] IO window: 3000-3fff [ 22.303103] MEM window: ee000000-ee0fffff [ 22.303107] PREFETCH window: disabled. [ 22.303113] PCI: Bridge: 0000:00:1c.1 [ 22.303116] IO window: 4000-5fff [ 22.303121] MEM window: ec000000-edffffff [ 22.303126] PREFETCH window: e4000000-e40fffff [ 22.303131] PCI: Bridge: 0000:00:1c.2 [ 22.303134] IO window: 6000-7fff [ 22.303140] MEM window: e8000000-e9ffffff [ 22.303144] PREFETCH window: e4100000-e41fffff [ 22.303150] PCI: Bridge: 0000:00:1c.3 [ 22.303153] IO window: 8000-9fff [ 22.303158] MEM window: ea000000-ebffffff [ 22.303163] PREFETCH window: e4200000-e42fffff [ 22.303171] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 22.303173] IO window: 0000a000-0000a0ff [ 22.303178] IO window: 0000a400-0000a4ff [ 22.303183] PREFETCH window: e0000000-e3ffffff [ 22.303189] MEM window: 88000000-8bffffff [ 22.303194] PCI: Bridge: 0000:00:1e.0 [ 22.303197] IO window: a000-dfff [ 22.303203] MEM window: e4300000-e7ffffff [ 22.303207] PREFETCH window: e0000000-e3ffffff [ 22.303223] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 22.303227] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 22.303249] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 22.303255] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 22.303277] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 22.303283] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 22.303306] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 22.303311] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 22.303334] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 22.303339] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 22.303350] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 22.303356] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 22.303373] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 22.303410] NET: Registered protocol family 2 [ 22.337557] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 22.337767] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 22.339664] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 22.340257] TCP: Hash tables configured (established 262144 bind 65536) [ 22.340260] TCP reno registered [ 22.353651] checking if image is initramfs... it is [ 23.010665] Freeing initrd memory: 7251k freed [ 23.014883] Simple Boot Flag at 0x35 set to 0x1 [ 23.015438] audit: initializing netlink socket (disabled) [ 23.015457] audit(1176366611.608:1): initialized [ 23.015643] VFS: Disk quotas dquot_6.5.1 [ 23.015663] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 23.015718] io scheduler noop registered [ 23.015720] io scheduler anticipatory registered [ 23.015722] io scheduler deadline registered [ 23.015735] io scheduler cfq registered (default) [ 23.016000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 23.016034] assign_interrupt_mode Found MSI capability [ 23.016037] Allocate Port Service[0000:00:01.0:pcie00] [ 23.016122] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 23.016178] assign_interrupt_mode Found MSI capability [ 23.016180] Allocate Port Service[0000:00:1c.0:pcie00] [ 23.016214] Allocate Port Service[0000:00:1c.0:pcie02] [ 23.016331] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 23.016386] assign_interrupt_mode Found MSI capability [ 23.016389] Allocate Port Service[0000:00:1c.1:pcie00] [ 23.016419] Allocate Port Service[0000:00:1c.1:pcie02] [ 23.016536] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 23.016591] assign_interrupt_mode Found MSI capability [ 23.016593] Allocate Port Service[0000:00:1c.2:pcie00] [ 23.016629] Allocate Port Service[0000:00:1c.2:pcie02] [ 23.016746] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 23.016801] assign_interrupt_mode Found MSI capability [ 23.016803] Allocate Port Service[0000:00:1c.3:pcie00] [ 23.016835] Allocate Port Service[0000:00:1c.3:pcie02] [ 23.038089] Real Time Clock Driver v1.12ac [ 23.038150] hpet_resources: 0xfed00000 is busy [ 23.038171] Linux agpgart interface v0.101 (c) Dave Jones [ 23.038173] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 23.038736] mice: PS/2 mouse device common for all mice [ 23.039286] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 23.039428] input: Macintosh mouse button emulation as /class/input/input0 [ 23.039463] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 23.039466] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 23.039761] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 23.047880] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.047884] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 23.048029] TCP cubic registered [ 23.048039] NET: Registered protocol family 1 [ 23.048161] ACPI: (supports S0 S3 S4 S5) [ 23.048206] Magic number: 3:213:523 [ 23.048297] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 23.048375] Freeing unused kernel memory: 304k freed [ 23.052337] input: AT Translated Set 2 keyboard as /class/input/input1 [ 24.197338] Capability LSM initialized [ 24.224791] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] [ 24.225116] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] [ 24.225942] Monitor-Mwait will be used to enter C-1 state [ 24.225944] Monitor-Mwait will be used to enter C-2 state [ 24.225946] Monitor-Mwait will be used to enter C-3 state [ 24.225952] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 24.225956] ACPI: Processor [CPU0] (supports 8 throttling states) [ 24.226468] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] [ 24.226714] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707] [ 24.227568] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 24.227573] ACPI: Processor [CPU1] (supports 8 throttling states) [ 24.229268] ACPI: Thermal Zone [THM0] (29 C) [ 24.230846] ACPI: Thermal Zone [THM1] (31 C) [ 24.533249] usbcore: registered new interface driver usbfs [ 24.533270] usbcore: registered new interface driver hub [ 24.533292] usbcore: registered new device driver usb [ 24.554800] USB Universal Host Controller Interface driver v3.0 [ 24.554863] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 24.554875] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 24.554879] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 24.555005] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 24.555041] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 24.555144] usb usb1: configuration #1 chosen from 1 choice [ 24.555168] hub 1-0:1.0: USB hub found [ 24.555173] hub 1-0:1.0: 2 ports detected [ 24.567627] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI [ 24.567630] Copyright (c) 1999-2006 Intel Corporation. [ 24.571626] SCSI subsystem initialized [ 24.575650] libata version 2.20 loaded. [ 24.597925] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 24.597936] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 24.597940] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 24.597959] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 24.597992] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 [ 24.598069] usb usb2: configuration #1 chosen from 1 choice [ 24.598091] hub 2-0:1.0: USB hub found [ 24.598095] hub 2-0:1.0: 2 ports detected [ 24.608705] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 24.608713] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 24.608716] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 24.608732] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 24.608761] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 24.608832] usb usb3: configuration #1 chosen from 1 choice [ 24.608851] hub 3-0:1.0: USB hub found [ 24.608855] hub 3-0:1.0: 2 ports detected [ 24.613459] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 24.613467] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 24.613470] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 24.613486] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 24.613514] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 [ 24.613586] usb usb4: configuration #1 chosen from 1 choice [ 24.613607] hub 4-0:1.0: USB hub found [ 24.613612] hub 4-0:1.0: 2 ports detected [ 24.616340] usb 1-2: new low speed USB device using uhci_hcd and address 2 [ 24.618868] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 24.618882] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 24.648030] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:41:e4:10:e3 [ 24.650439] usb 1-2: configuration #1 chosen from 1 choice [ 24.664853] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 24.665448] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 [ 24.665475] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 24.665479] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 24.665609] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 24.665641] ehci_hcd 0000:00:1d.7: debug port 1 [ 24.665648] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 24.665654] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000 [ 24.669542] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.669609] usb usb5: configuration #1 chosen from 1 choice [ 24.669632] hub 5-0:1.0: USB hub found [ 24.669637] hub 5-0:1.0: 8 ports detected [ 24.674309] ahci 0000:00:1f.2: version 2.1 [ 24.674331] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 24.684886] usb 1-2: USB disconnect, address 2 [ 24.685727] usbcore: registered new interface driver hiddev [ 24.711177] usbcore: registered new interface driver usbhid [ 24.711180] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 24.720137] usb 1-2: new low speed USB device using uhci_hcd and address 3 [ 24.727032] usb 1-2: configuration #1 chosen from 1 choice [ 24.736067] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 [ 24.736084] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2 [ 24.743226] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 24.743235] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 24.743238] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 24.743333] ata1: SATA max UDMA/133 cmd 0xffffc20000030500 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 [ 24.743395] ata2: SATA max UDMA/133 cmd 0xffffc20000030580 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 [ 24.743456] ata3: SATA max UDMA/133 cmd 0xffffc20000030600 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 [ 24.743518] ata4: SATA max UDMA/133 cmd 0xffffc20000030680 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 [ 24.743525] scsi0 : ahci [ 24.749601] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 24.795905] usb 4-2: configuration #1 chosen from 1 choice [ 24.809232] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 24.817976] ata1.00: ATA-7: ST910021AS, 4.06, max UDMA/100 [ 24.817979] ata1.00: 195371568 sectors, multi 16: LBA48 [ 24.821232] ata1.00: configured for UDMA/100 [ 24.821252] scsi1 : ahci [ 24.831140] ata2: SATA link down (SStatus 0 SControl 0) [ 24.831150] scsi2 : ahci [ 24.841625] ata3: SATA link down (SStatus 0 SControl 0) [ 24.841634] scsi3 : ahci [ 24.853139] ata4: SATA link down (SStatus 0 SControl 0) [ 24.853224] scsi 0:0:0:0: Direct-Access ATA ST910021AS 4.06 PQ: 0 ANSI: 5 [ 24.853293] ata_piix 0000:00:1f.1: version 2.10ac1 [ 24.853311] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 24.853331] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 24.853692] ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011880 irq 14 [ 24.853829] ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011888 irq 15 [ 24.853852] scsi4 : ata_piix [ 24.858482] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 24.858492] sda: Write Protect is off [ 24.858494] sda: Mode Sense: 00 3a 00 00 [ 24.858507] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.858548] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 24.858555] sda: Write Protect is off [ 24.858557] sda: Mode Sense: 00 3a 00 00 [ 24.858569] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.858575] sda: sda1 sda2 sda3 < sda5 sda6 > [ 24.907270] sd 0:0:0:0: Attached scsi disk sda [ 24.910180] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.119192] Attempting manual resume [ 25.119195] swsusp: Resume From Partition 8:5 [ 25.119197] PM: Checking swsusp image. [ 25.135376] PM: Resume from disk failed. [ 25.145412] EXT3-fs: INFO: recovery required on readonly filesystem. [ 25.145415] EXT3-fs: write access will be enabled during recovery. [ 25.154250] ata5.00: ATAPI, max UDMA/33 [ 25.318184] ata5.00: configured for UDMA/33 [ 25.318192] scsi5 : ata_piix [ 25.318265] ata6: port disabled. ignoring. [ 25.318267] ata6: reset failed, giving up [ 25.322217] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4083N 1.08 PQ: 0 ANSI: 5 [ 25.322266] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 25.343666] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 25.343669] Uniform CD-ROM driver Revision: 3.20 [ 25.343703] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 29.947766] kjournald starting. Commit interval 5 seconds [ 29.947778] EXT3-fs: recovery complete. [ 29.965121] EXT3-fs: mounted filesystem with ordered data mode. [ 37.323742] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22 [ 38.571246] agpgart: Detected an Intel 945GM Chipset. [ 38.588455] agpgart: AGP aperture is 256M @ 0x0 [ 38.615385] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 38.626466] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 38.707606] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012] [ 38.707631] Yenta: Using INTVAL to route CSC interrupts to PCI [ 38.707633] Yenta: Routing CardBus interrupts to PCI [ 38.707639] Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64 [ 38.741118] input: PC Speaker as /class/input/input3 [ 38.816316] iTCO_vendor_support: vendor-support=0 [ 38.817174] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 38.825961] ieee80211_crypt: registered algorithm 'NULL' [ 38.828240] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 38.828243] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 38.927872] irda_init() [ 38.927882] NET: Registered protocol family 23 [ 38.930538] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 38.930542] Socket status: 30000007 [ 38.930546] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff [ 38.930548] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [ 38.930551] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [ 38.943740] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp [ 38.943743] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 38.944149] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 38.944165] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 38.947501] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 39.076515] NET: Registered protocol family 17 [ 39.223807] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 [ 39.223832] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 39.328729] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 39.328737] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 39.357376] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 39.360775] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 39.360816] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 39.367551] pnp: Device 00:0a activated. [ 39.367555] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 39.367577] nsc-ircc, chip->init [ 39.367591] nsc-ircc, Found chip at base=0x164e [ 39.367632] nsc-ircc, driver loaded (Dag Brattli) [ 39.367703] IrDA: Registered device irda0 [ 39.367705] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 39.412519] intel_rng: FWH not detected [ 39.553959] fuse init (API version 7.8) [ 39.600918] lp: driver loaded but no devices found [ 39.637374] Adding 1951856k swap on /dev/disk/by-uuid/bf077d42-b592-47e6-b618-01c1665f3917. Priority:-1 extents:1 across:1951856k [ 39.796692] EXT3 FS on sda6, internal journal [ 40.757417] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 42.332146] kjournald starting. Commit interval 5 seconds [ 42.332371] EXT3 FS on sda2, internal journal [ 42.332375] EXT3-fs: mounted filesystem with ordered data mode. [ 42.366562] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 42.415559] NTFS volume version 3.1. [ 42.866208] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 42.994085] input: TPPS/2 IBM TrackPoint as /class/input/input5 [ 45.548253] Using specific hotkey driver [ 45.621395] ACPI: Battery Slot [BAT0] (battery present) [ 45.635608] input: Power Button (FF) as /class/input/input6 [ 45.635631] ACPI: Power Button (FF) [PWRF] [ 45.635661] input: Lid Switch as /class/input/input7 [ 45.635678] ACPI: Lid Switch [LID] [ 45.635706] input: Sleep Button (CM) as /class/input/input8 [ 45.635723] ACPI: Sleep Button (CM) [SLPB] [ 45.718277] ibm_acpi: ThinkPad EC firmware 79HT50WW-1.07 [ 45.718319] ibm_acpi: IBM ThinkPad ACPI Extras v0.13 [ 45.718321] ibm_acpi: http://ibm-acpi.sf.net/ [ 45.743712] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 45.743963] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 45.762770] ACPI: ACPI Dock Station Driver [ 45.799679] ACPI: AC Adapter [AC] (on-line) [ 45.815727] pcc_acpi: loading... [ 50.685083] ppdev: user-space parallel port driver [ 51.362301] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 51.365517] [fglrx] Maximum main memory to use for locked dma buffers: 1884 MBytes. [ 51.365618] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0 [ 51.427628] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 52.557887] Non-volatile memory driver v1.2 [ 52.590157] input: /usr/sbin/thinkpad-keys as /class/input/input9 [ 52.720376] Bluetooth: Core ver 2.11 [ 52.720434] NET: Registered protocol family 31 [ 52.720436] Bluetooth: HCI device and connection manager initialized [ 52.720439] Bluetooth: HCI socket layer initialized [ 52.733375] Bluetooth: L2CAP ver 2.8 [ 52.733378] Bluetooth: L2CAP socket layer initialized [ 52.942647] Bluetooth: RFCOMM socket layer initialized [ 52.942662] Bluetooth: RFCOMM TTY layer initialized [ 52.942664] Bluetooth: RFCOMM ver 1.8 [ 53.524323] [fglrx] total GART = 130023424 [ 53.524330] [fglrx] free GART = 114032640 [ 53.524332] [fglrx] max single GART = 114032640 [ 53.524334] [fglrx] total LFB = 268304384 [ 53.524336] [fglrx] free LFB = 251875328 [ 53.524338] [fglrx] max single LFB = 251875328 [ 53.524340] [fglrx] total Inv = 0 [ 53.524341] [fglrx] free Inv = 0 [ 53.524343] [fglrx] max single Inv = 0 [ 53.524345] [fglrx] total TIM = 0 [ 59.405120] NET: Registered protocol family 10 [ 59.405254] lo: Disabled Privacy Extensions [ 59.405320] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 59.405324] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 232.741451] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 464.157855] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 482.074894] eth1: no IPv6 routers present