no sound after upgrade to feisty

Bug #103542 reported by Michael Greifeneder on 2007-04-06
2
Affects Status Importance Assigned to Milestone
linux-source-2.6.20 (Ubuntu)
Undecided
Unassigned

Bug Description

Sound was working since dapper, but is broken after upgrade to feisty. There is no obvious problem, but I hear no sound.
I have set every volume bar to 100%.

*** tail -2 /proc/asound/oss/sndstat ***
Mixers:
0: Analog Devices AD1981B
*** amixer ***
Simple mixer control 'Master',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 31 [100%] [0.00dB] [on]
  Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Master Mono',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 31
  Mono: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 31 [100%] [0.00dB] [on]
  Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Headphone Jack Sense',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 31 [100%] [12.00dB] [on]
  Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Line',0
  Capabilities: pvolume pswitch cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 31 [100%] [12.00dB] [on] Capture [off]
  Front Right: Playback 31 [100%] [12.00dB] [on] Capture [off]
Simple mixer control 'Line Jack Sense',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'CD',0
  Capabilities: pvolume pswitch cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 31 [100%] [12.00dB] [on] Capture [off]
  Front Right: Playback 31 [100%] [12.00dB] [on] Capture [off]
Simple mixer control 'Mic',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Mono
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono: Playback 31 [100%] [12.00dB] [on]
  Front Left: Capture [off]
  Front Right: Capture [off]
Simple mixer control 'Mic Boost (+20dB)',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Mic Select',0
  Capabilities: enum
  Items: 'Mic1' 'Mic2'
  Item0: 'Mic1'
Simple mixer control 'Video',0
  Capabilities: cswitch cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Front Left - Front Right
  Front Left: Capture [on]
  Front Right: Capture [on]
Simple mixer control 'Phone',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Mono
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono: Playback 31 [100%] [12.00dB] [on]
  Front Left: Capture [off]
  Front Right: Capture [off]
Simple mixer control 'Aux',0
  Capabilities: pvolume pswitch cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 31 [100%] [12.00dB] [on] Capture [off]
  Front Right: Playback 31 [100%] [12.00dB] [on] Capture [off]
Simple mixer control 'Mono Output Select',0
  Capabilities: enum
  Items: 'Mix' 'Mic'
  Item0: 'Mix'
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 15
  Front Left: Capture 0 [0%] [0.00dB] [off]
  Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Mix',0
  Capabilities: cswitch cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Front Left - Front Right
  Front Left: Capture [off]
  Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
  Capabilities: cswitch cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Front Left - Front Right
  Front Left: Capture [off]
  Front Right: Capture [off]
Simple mixer control 'External Amplifier',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Stereo Mic',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
*** lspci -nv ***
00:00.0 0600: 8086:2590 (rev 03)
 Subsystem: 1014:0575
 Flags: bus master, fast devsel, latency 0
 Capabilities: <access denied>

00:02.0 0300: 8086:2592 (rev 03) (prog-if 00 [VGA])
 Subsystem: 1014:0582
 Flags: bus master, fast devsel, latency 0, IRQ 11
 Memory at a0080000 (32-bit, non-prefetchable) [size=512K]
 I/O ports at 1800 [size=8]
 Memory at c0000000 (32-bit, prefetchable) [size=256M]
 Memory at a0000000 (32-bit, non-prefetchable) [size=256K]
 Capabilities: <access denied>

00:02.1 0380: 8086:2792 (rev 03)
 Subsystem: 1014:0582
 Flags: fast devsel
 Memory at 50000000 (32-bit, non-prefetchable) [disabled] [size=512K]
 Capabilities: <access denied>

00:1c.0 0604: 8086:2660 (rev 03) (prog-if 00 [Normal decode])
 Flags: bus master, fast devsel, latency 0
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
 Memory behind bridge: a0100000-a01fffff
 Capabilities: <access denied>

00:1d.0 0c03: 8086:2658 (rev 03) (prog-if 00 [UHCI])
 Subsystem: 1014:0565
 Flags: bus master, medium devsel, latency 0, IRQ 17
 I/O ports at 1820 [size=32]

00:1d.1 0c03: 8086:2659 (rev 03) (prog-if 00 [UHCI])
 Subsystem: 1014:0565
 Flags: bus master, medium devsel, latency 0, IRQ 19
 I/O ports at 1840 [size=32]

00:1d.2 0c03: 8086:265a (rev 03) (prog-if 00 [UHCI])
 Subsystem: 1014:0565
 Flags: bus master, medium devsel, latency 0, IRQ 20
 I/O ports at 1860 [size=32]

00:1d.3 0c03: 8086:265b (rev 03) (prog-if 00 [UHCI])
 Subsystem: 1014:0565
 Flags: bus master, medium devsel, latency 0, IRQ 21
 I/O ports at 1880 [size=32]

00:1d.7 0c03: 8086:265c (rev 03) (prog-if 20 [EHCI])
 Subsystem: 1014:0566
 Flags: bus master, medium devsel, latency 0, IRQ 21
 Memory at a0040000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: <access denied>

00:1e.0 0604: 8086:2448 (rev d3) (prog-if 01 [Subtractive decode])
 Flags: bus master, fast devsel, latency 0
 Bus: primary=00, secondary=04, subordinate=07, sec-latency=64
 I/O behind bridge: 00003000-00006fff
 Memory behind bridge: a0200000-afffffff
 Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
 Capabilities: <access denied>

00:1e.2 0401: 8086:266e (rev 03)
 Subsystem: 1014:0581
 Flags: bus master, medium devsel, latency 0, IRQ 23
 I/O ports at 1c00 [size=256]
 I/O ports at 18c0 [size=64]
 Memory at a0040800 (32-bit, non-prefetchable) [size=512]
 Memory at a0040400 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>

00:1e.3 0703: 8086:266d (rev 03) (prog-if 00 [Generic])
 Subsystem: 1014:0576
 Flags: medium devsel, IRQ 18
 I/O ports at 2400 [size=256]
 I/O ports at 2000 [size=128]
 Capabilities: <access denied>

00:1f.0 0601: 8086:2641 (rev 03)
 Subsystem: 1014:0568
 Flags: bus master, medium devsel, latency 0

00:1f.2 0101: 8086:2653 (rev 03) (prog-if 80 [Master])
 Subsystem: 1014:056a
 Flags: bus master, 66MHz, medium devsel, latency 0
 I/O ports at 01f0 [size=8]
 I/O ports at 03f4 [size=1]
 I/O ports at 0170 [size=8]
 I/O ports at 0374 [size=1]
 I/O ports at 1810 [size=16]
 Capabilities: <access denied>

00:1f.3 0c05: 8086:266a (rev 03)
 Subsystem: 1014:056b
 Flags: medium devsel, IRQ 11
 I/O ports at 18a0 [size=32]

02:00.0 0200: 14e4:167d (rev 11)
 Subsystem: 1014:0577
 Flags: bus master, fast devsel, latency 0, IRQ 17
 Memory at a0100000 (64-bit, non-prefetchable) [size=64K]
 Capabilities: <access denied>

04:00.0 0607: 1180:0476 (rev 8d)
 Subsystem: 1014:0555
 Flags: bus master, medium devsel, latency 168, IRQ 17
 Memory at a0200000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=04, secondary=05, subordinate=06, sec-latency=176
 Memory window 0: d0000000-d3fff000 (prefetchable)
 Memory window 1: a4000000-a7fff000
 I/O window 0: 00003000-000030ff
 I/O window 1: 00003400-000034ff
 16-bit legacy interface ports at 0001

04:00.1 0805: 1180:0822 (rev 13)
 Subsystem: 1014:0556
 Flags: bus master, medium devsel, latency 64, IRQ 19
 Memory at a0201000 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>

04:02.0 0280: 8086:4220 (rev 05)
 Subsystem: 8086:2711
 Flags: bus master, medium devsel, latency 64, IRQ 22
 Memory at a0202000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: <access denied>

*** asoundconf list ***
Names of available sound cards:
ICH6
*** cat /etc/asound.conf ~/.asoundrc* ***
cat: /etc/asound.conf: No such file or directory
cat: /home/mike/.asoundrc*: No such file or directory
*** dmesg ***
[ 0.000000] Linux version 2.6.20-14-386 (root@rothera) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 Mon Apr 2 20:34:35 UTC 2007 (Ubuntu 2.6.20-14.22-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d0000 size: 0000000000004000 end: 00000000000d4000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003f5d0000 end: 000000003f6d0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003f6d0000 size: 0000000000015000 end: 000000003f6e5000 type: 3
[ 0.000000] copy_e820_map() start: 000000003f6e5000 size: 000000000001b000 end: 000000003f700000 type: 4
[ 0.000000] copy_e820_map() start: 000000003f700000 size: 0000000000900000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0008000 size: 0000000000004000 end: 00000000f000c000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size: 0000000000070000 end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6e5000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6e5000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 259792) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259792
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259792
[ 0.000000] On node 0 totalpages: 259792
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 237 pages used for memmap
[ 0.000000] HighMem zone: 30179 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v002 IBM ) @ 0x000f6c10
[ 0.000000] ACPI: XSDT (v001 IBM TP-74 0x00001160 LTP 0x00000000) @ 0x3f6d4c53
[ 0.000000] ACPI: FADT (v003 IBM TP-74 0x00001160 IBM 0x00000001) @ 0x3f6d4d00
[ 0.000000] ACPI: SSDT (v001 IBM TP-74 0x00001160 MSFT 0x0100000e) @ 0x3f6d4eb4
[ 0.000000] ACPI: ECDT (v001 IBM TP-74 0x00001160 IBM 0x00000001) @ 0x3f6e4d8e
[ 0.000000] ACPI: TCPA (v001 IBM TP-74 0x00001160 PTL 0x00000001) @ 0x3f6e4de0
[ 0.000000] ACPI: MADT (v001 IBM TP-74 0x00001160 IBM 0x00000001) @ 0x3f6e4e12
[ 0.000000] ACPI: MCFG (v001 IBM TP-74 0x00001160 IBM 0x00000001) @ 0x3f6e4e6c
[ 0.000000] ACPI: BOOT (v001 IBM TP-74 0x00001160 LTP 0x00000001) @ 0x3f6e4fd8
[ 0.000000] ACPI: DSDT (v001 IBM TP-74 0x00001160 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Detected 1496.292 MHz processor.
[ 3.737593] Built 1 zonelists. Total pages: 257763
[ 3.737596] Kernel command line: root=UUID=d975a096-9a00-4c96-ad64-36696c4dfa84 ro quiet splash
[ 3.737779] mapped APIC to ffffd000 (fee00000)
[ 3.737782] mapped IOAPIC to ffffc000 (fec00000)
[ 3.737785] Enabling fast FPU save and restore... done.
[ 3.737788] Enabling unmasked SIMD FPU exception support... done.
[ 3.737797] Initializing CPU#0
[ 3.737868] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 3.739827] Console: colour VGA+ 80x25
[ 3.740251] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 3.740770] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 3.776221] Memory: 1017984k/1039168k available (1916k kernel code, 20488k reserved, 860k data, 328k init, 121664k highmem)
[ 3.776232] virtual kernel memory layout:
[ 3.776234] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
[ 3.776235] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 3.776237] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 3.776238] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 3.776240] .init : 0xc03ba000 - 0xc040c000 ( 328 kB)
[ 3.776241] .data : 0xc02df343 - 0xc03b6434 ( 860 kB)
[ 3.776242] .text : 0xc0100000 - 0xc02df343 (1916 kB)
[ 3.776246] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 3.853819] Calibrating delay using timer specific routine.. 2995.68 BogoMIPS (lpj=5991365)
[ 3.853852] Security Framework v1.0.0 initialized
[ 3.853860] SELinux: Disabled at boot.
[ 3.853871] Mount-cache hash table entries: 512
[ 3.853980] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[ 3.853991] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.853994] CPU: L2 cache: 2048K
[ 3.853996] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000
[ 3.854006] Compat vDSO mapped to ffffe000.
[ 3.854010] Remapping vsyscall page to ffffe000
[ 3.854019] CPU: Intel(R) Pentium(R) M processor 1.50GHz stepping 08
[ 3.854026] Checking 'hlt' instruction... OK.
[ 3.870212] Early unpacking initramfs... done
[ 4.300700] ACPI: Core revision 20060707
[ 4.300957] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 4.324501] ENABLING IO-APIC IRQs
[ 4.324704] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 4.469721] Booting paravirtualized kernel on bare hardware
[ 4.469801] Time: 1:50:16 Date: 03/06/107
[ 4.469827] NET: Registered protocol family 16
[ 4.469905] EISA bus registered
[ 4.469910] ACPI: bus type pci registered
[ 4.469981] PCI: PCI BIOS revision 2.10 entry at 0xfd8d8, last bus=7
[ 4.469984] PCI: Using configuration type 1
[ 4.469986] Setting up standard PCI resources
[ 4.609306] ACPI: Interpreter enabled
[ 4.609309] ACPI: Using IOAPIC for interrupt routing
[ 4.610220] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.610939] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.611655] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.612374] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.613089] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.613812] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.614527] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.615244] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.615667] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 4.615672] PCI: Probing PCI hardware (bus 00)
[ 4.617224] Boot video device is 0000:00:02.0
[ 4.617852] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 4.617857] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 4.618478] PCI: Transparent bridge - 0000:00:1e.0
[ 4.618580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 4.624053] ACPI: Power Resource [PUBS] (on)
[ 4.625577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 4.625908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 4.632916] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 4.632925] pnp: PnP ACPI init
[ 4.641755] pnp: PnP ACPI: found 13 devices
[ 4.641759] PnPBIOS: Disabled by ACPI PNP
[ 4.641797] PCI: Using ACPI for IRQ routing
[ 4.641800] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 4.661545] NET: Registered protocol family 8
[ 4.661547] NET: Registered protocol family 20
[ 4.662459] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 4.662467] PCI: Bridge: 0000:00:1c.0
[ 4.662469] IO window: disabled.
[ 4.662476] MEM window: a0100000-a01fffff
[ 4.662480] PREFETCH window: disabled.
[ 4.662489] PCI: Bus 5, cardbus bridge: 0000:04:00.0
[ 4.662491] IO window: 00003000-000030ff
[ 4.662497] IO window: 00003400-000034ff
[ 4.662503] PREFETCH window: d0000000-d3ffffff
[ 4.662509] MEM window: a4000000-a7ffffff
[ 4.662514] PCI: Bridge: 0000:00:1e.0
[ 4.662518] IO window: 3000-6fff
[ 4.662524] MEM window: a0200000-afffffff
[ 4.662529] PREFETCH window: d0000000-d7ffffff
[ 4.662559] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 4.662566] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 4.662580] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 4.662598] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 4.662622] NET: Registered protocol family 2
[ 4.697437] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 4.697543] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[ 4.698020] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 4.698265] TCP: Hash tables configured (established 131072 bind 65536)
[ 4.698269] TCP reno registered
[ 4.709513] checking if image is initramfs... it is
[ 5.556066] Freeing initrd memory: 8049k freed
[ 5.556297] Simple Boot Flag at 0x35 set to 0x1
[ 5.556518] audit: initializing netlink socket (disabled)
[ 5.556534] audit(1175824216.888:1): initialized
[ 5.556603] highmem bounce pool size: 64 pages
[ 5.556672] VFS: Disk quotas dquot_6.5.1
[ 5.556691] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.556751] io scheduler noop registered
[ 5.556755] io scheduler anticipatory registered
[ 5.556757] io scheduler deadline registered
[ 5.556769] io scheduler cfq registered (default)
[ 5.557056] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 5.557112] assign_interrupt_mode Found MSI capability
[ 5.557115] Allocate Port Service[0000:00:1c.0:pcie00]
[ 5.557148] Allocate Port Service[0000:00:1c.0:pcie02]
[ 5.557316] isapnp: Scanning for PnP cards...
[ 5.911687] isapnp: No Plug & Play device found
[ 5.936419] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 5.936565] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 5.936762] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 5.937451] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 5.937672] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 18
[ 5.937684] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 5.937746] mice: PS/2 mouse device common for all mice
[ 5.938238] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 5.938471] input: Macintosh mouse button emulation as /class/input/input0
[ 5.938503] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 5.938507] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 5.938743] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 5.947044] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.947049] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.947154] EISA: Probing bus 0 at eisa.0
[ 5.947163] Cannot allocate resource for EISA slot 1
[ 5.947168] Cannot allocate resource for EISA slot 2
[ 5.947170] Cannot allocate resource for EISA slot 3
[ 5.947173] Cannot allocate resource for EISA slot 4
[ 5.947175] Cannot allocate resource for EISA slot 5
[ 5.947178] Cannot allocate resource for EISA slot 6
[ 5.947188] EISA: Detected 0 cards.
[ 5.977278] TCP cubic registered
[ 5.977286] NET: Registered protocol family 1
[ 5.977309] Using IPI Shortcut mode
[ 5.977376] ACPI: (supports S0 S3 S4 S5)
[ 5.977431] Magic number: 3:327:811
[ 5.977512] hash matches device ptys5
[ 5.977749] Freeing unused kernel memory: 328k freed
[ 5.980767] Time: tsc clocksource has been installed.
[ 5.980861] input: AT Translated Set 2 keyboard as /class/input/input1
[ 7.203250] Capability LSM initialized
[ 7.218395] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: <email address hidden>
[ 7.248863] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 7.248869] ACPI: Processor [CPU] (supports 8 throttling states)
[ 7.250654] ACPI: Thermal Zone [THM0] (66 C)
[ 7.327772] md: linear personality registered for level -1
[ 7.331260] md: multipath personality registered for level -4
[ 7.334560] md: raid0 personality registered for level 0
[ 7.338395] md: raid1 personality registered for level 1
[ 7.341538] raid5: automatically using best checksumming function: pIII_sse
[ 7.360081] pIII_sse : 3890.000 MB/sec
[ 7.360084] raid5: using function: pIII_sse (3890.000 MB/sec)
[ 7.432050] raid6: int32x1 500 MB/s
[ 7.500089] raid6: int32x2 589 MB/s
[ 7.568059] raid6: int32x4 487 MB/s
[ 7.635964] raid6: int32x8 410 MB/s
[ 7.703915] raid6: mmxx1 1500 MB/s
[ 7.771906] raid6: mmxx2 1718 MB/s
[ 7.839899] raid6: sse1x1 1101 MB/s
[ 7.907822] raid6: sse1x2 1799 MB/s
[ 7.975783] raid6: sse2x1 1966 MB/s
[ 8.043746] raid6: sse2x2 2198 MB/s
[ 8.043748] raid6: using algorithm sse2x2 (2198 MB/s)
[ 8.043751] md: raid6 personality registered for level 6
[ 8.043754] md: raid5 personality registered for level 5
[ 8.043756] md: raid4 personality registered for level 4
[ 8.079127] md: raid10 personality registered for level 10
[ 8.369058] usbcore: registered new interface driver usbfs
[ 8.369080] usbcore: registered new interface driver hub
[ 8.369099] usbcore: registered new device driver usb
[ 8.369952] USB Universal Host Controller Interface driver v3.0
[ 8.370000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 8.370012] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 8.370016] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.370180] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 8.370212] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001820
[ 8.370310] usb usb1: configuration #1 chosen from 1 choice
[ 8.370337] hub 1-0:1.0: USB hub found
[ 8.370345] hub 1-0:1.0: 2 ports detected
[ 8.471707] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19
[ 8.471722] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 8.471727] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.471750] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 8.471782] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 8.471873] usb usb2: configuration #1 chosen from 1 choice
[ 8.471903] hub 2-0:1.0: USB hub found
[ 8.471909] hub 2-0:1.0: 2 ports detected
[ 8.575616] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 8.575630] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 8.575635] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.575655] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 8.575687] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
[ 8.575779] usb usb3: configuration #1 chosen from 1 choice
[ 8.575803] hub 3-0:1.0: USB hub found
[ 8.575810] hub 3-0:1.0: 2 ports detected
[ 4.796000] Time: acpi_pm clocksource has been installed.
[ 4.832000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21
[ 4.832000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 4.832000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.832000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 4.832000] uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001880
[ 4.832000] usb usb4: configuration #1 chosen from 1 choice
[ 4.832000] hub 4-0:1.0: USB hub found
[ 4.832000] hub 4-0:1.0: 2 ports detected
[ 4.864000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 4.936000] tg3.c:v3.72 (January 8, 2007)
[ 4.936000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 4.936000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 4.976000] eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:0a:e4:32:5e:69
[ 4.976000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[ 4.976000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.976000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21
[ 4.976000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.976000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.976000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 4.976000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.976000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.976000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xa0040000
[ 4.980000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.980000] usb usb5: configuration #1 chosen from 1 choice
[ 4.980000] hub 5-0:1.0: USB hub found
[ 4.980000] hub 5-0:1.0: 8 ports detected
[ 5.088000] SCSI subsystem initialized
[ 5.096000] libata version 2.20 loaded.
[ 5.096000] ahci 0000:00:1f.2: version 2.1
[ 5.096000] ahci: probe of 0000:00:1f.2 failed with error -22
[ 5.100000] ata_piix 0000:00:1f.2: version 2.10ac1
[ 5.100000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 5.256000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.256000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
[ 5.256000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
[ 5.256000] scsi0 : ata_piix
[ 5.392000] usb 1-1: device not accepting address 2, error -71
[ 5.420000] ata1.00: ATA-6: HTC426040G9AT00, 00P4A0B5, max UDMA/100
[ 5.420000] ata1.00: 78140160 sectors, multi 16: LBA
[ 5.420000] ata1.00: applying bridge limits
[ 5.428000] ata1.00: configured for UDMA/100
[ 5.428000] scsi1 : ata_piix
[ 5.688000] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 5.748000] ata2.00: ATAPI, max UDMA/33
[ 5.820000] usb 5-1: configuration #1 chosen from 1 choice
[ 5.820000] hub 5-1:1.0: USB hub found
[ 5.820000] hub 5-1:1.0: 3 ports detected
[ 5.912000] ata2.00: configured for UDMA/33
[ 5.912000] scsi 0:0:0:0: Direct-Access ATA HTC426040G9AT00 00P4 PQ: 0 ANSI: 5
[ 5.912000] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-822S 1.03 PQ: 0 ANSI: 5
[ 5.924000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[ 5.924000] sda: Write Protect is off
[ 5.924000] sda: Mode Sense: 00 3a 00 00
[ 5.924000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.924000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[ 5.924000] sda: Write Protect is off
[ 5.924000] sda: Mode Sense: 00 3a 00 00
[ 5.924000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.924000] sda: sda1 sda3 < sda5 sda6 sda7 sda8 >
[ 6.104000] sd 0:0:0:0: Attached scsi disk sda
[ 6.108000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.108000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.116000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.116000] Uniform CD-ROM driver Revision: 3.20
[ 6.116000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.280000] usb 5-1.3: new full speed USB device using ehci_hcd and address 3
[ 6.376000] usb 5-1.3: configuration #1 chosen from 1 choice
[ 6.540000] kjournald starting. Commit interval 5 seconds
[ 6.540000] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.348000] Linux agpgart interface v0.102 (c) Dave Jones
[ 25.656000] agpgart: Detected an Intel 915GM Chipset.
[ 25.656000] agpgart: Detected 7932K stolen memory.
[ 25.676000] agpgart: AGP aperture is 256M @ 0xc0000000
[ 25.728000] iTCO_vendor_support: vendor-support=0
[ 25.792000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 25.792000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 25.792000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 25.828000] Yenta: CardBus bridge found at 0000:04:00.0 [1014:0555]
[ 25.956000] Yenta: ISA IRQ mask 0x04b8, PCI irq 17
[ 25.956000] Socket status: 30000006
[ 25.956000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x6fff
[ 25.956000] cs: IO port probe 0x3000-0x6fff: clean.
[ 25.956000] pcmcia: parent PCI bridge Memory window: 0xa0200000 - 0xafffffff
[ 25.956000] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff
[ 26.204000] ieee80211_crypt: registered algorithm 'NULL'
[ 26.220000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 26.220000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 26.276000] intel_rng: FWH not detected
[ 26.332000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 26.344000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.416000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
[ 26.416000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 26.416000] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 22
[ 26.416000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 26.536000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
[ 26.536000] usbcore: registered new interface driver usblp
[ 26.536000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 26.540000] Real Time Clock Driver v1.12ac
[ 26.544000] sdhci: Secure Digital Host Controller Interface driver
[ 26.544000] sdhci: Copyright(c) Pierre Ossman
[ 26.668000] input: PC Speaker as /class/input/input2
[ 26.708000] parport: PnPBIOS parport detected.
[ 26.708000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 27.112000] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 27.128000] input: TPPS/2 IBM TrackPoint as /class/input/input3
[ 27.280000] irda_init()
[ 27.280000] NET: Registered protocol family 23
[ 27.416000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 27.416000] sdhci: SDHCI controller found at 0000:04:00.1 [1180:0822] (rev 13)
[ 27.416000] ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 17 (level, low) -> IRQ 19
[ 27.416000] mmc0: SDHCI at 0xa0201000 irq 19 DMA
[ 27.440000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.
[ 27.440000] nsc-ircc, chip->init
[ 27.440000] nsc-ircc, Found chip at base=0x164e
[ 27.440000] nsc-ircc, driver loaded (Dag Brattli)
[ 27.440000] nsc_ircc_open(), can't get iobase of 0x2f8
[ 27.440000] nsc-ircc, Found chip at base=0x164e
[ 27.440000] nsc-ircc, driver loaded (Dag Brattli)
[ 27.440000] nsc_ircc_open(), can't get iobase of 0x2f8
[ 27.440000] nsc-ircc, chip->init
[ 27.440000] nsc-ircc, Found chip at base=0x02e
[ 27.440000] nsc-ircc, driver loaded (Dag Brattli)
[ 27.440000] pnp: Device 00:0b disabled.
[ 27.624000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 23
[ 27.624000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 28.012000] cs: IO port probe 0x100-0x3af: clean.
[ 28.012000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 28.012000] cs: IO port probe 0x820-0x8ff: clean.
[ 28.012000] cs: IO port probe 0xc00-0xcf7: clean.
[ 28.024000] cs: IO port probe 0xa00-0xaff: clean.
[ 28.444000] intel8x0_measure_ac97_clock: measured 55485 usecs
[ 28.444000] intel8x0: clocking to 48000
[ 28.736000] lp0: using parport0 (interrupt-driven).
[ 28.860000] fuse init (API version 7.8)
[ 28.924000] Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k
[ 29.048000] EXT3 FS on sda8, internal journal
[ 32.764000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 32.952000] NTFS volume version 3.1.
[ 32.968000] kjournald starting. Commit interval 5 seconds
[ 33.104000] EXT3 FS on dm-2, internal journal
[ 33.104000] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.144000] kjournald starting. Commit interval 5 seconds
[ 33.144000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 33.144000] EXT3 FS on dm-3, internal journal
[ 33.144000] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.440000] NET: Registered protocol family 10
[ 34.440000] lo: Disabled Privacy Extensions
[ 34.440000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.588000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 35.588000] tg3: eth0: Flow control is on for TX and on for RX.
[ 35.588000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 35.728000] NET: Registered protocol family 17
[ 38.412000] ttyS1: LSR safety check engaged!
[ 38.412000] ttyS1: LSR safety check engaged!
[ 41.208000] ACPI: AC Adapter [AC] (on-line)
[ 41.264000] ACPI: Battery Slot [BAT0] (battery present)
[ 41.328000] input: Power Button (FF) as /class/input/input4
[ 41.332000] ACPI: Power Button (FF) [PWRF]
[ 41.376000] input: Lid Switch as /class/input/input5
[ 41.380000] ACPI: Lid Switch [LID]
[ 41.424000] input: Sleep Button (CM) as /class/input/input6
[ 41.428000] ACPI: Sleep Button (CM) [SLPB]
[ 41.464000] Using specific hotkey driver
[ 41.516000] ACPI: ACPI Dock Station Driver
[ 41.632000] ibm_acpi: ThinkPad EC firmware 74HT25WW-1.00
[ 41.632000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13
[ 41.632000] ibm_acpi: http://ibm-acpi.sf.net/
[ 41.716000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 41.744000] pcc_acpi: loading...
[ 45.688000] ttyS1: LSR safety check engaged!
[ 46.288000] eth0: no IPv6 routers present
[ 54.812000] ppdev: user-space parallel port driver
[ 59.436000] IBM machine detected. Enabling interrupts during APM calls.
[ 59.436000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 59.436000] apm: overridden by ACPI.
[ 61.524000] Non-volatile memory driver v1.2
[ 61.776000] input: /usr/sbin/thinkpad-keys as /class/input/input7
[ 62.656000] eth1: no IPv6 routers present
[ 63.316000] eth0: no IPv6 routers present
[ 68.320000] vmmon: module license 'unspecified' taints kernel.
[ 68.328000] /dev/vmmon[5389]: Module vmmon: registered with major=10 minor=165
[ 68.328000] /dev/vmmon[5389]: Module vmmon: initialized
[ 68.804000] /dev/vmnet: open called by PID 5413 (vmnet-bridge)
[ 68.804000] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 68.804000] /dev/vmnet: port on hub 0 successfully opened
[ 68.804000] bridge-eth0: enabling the bridge
[ 68.808000] bridge-eth0: up
[ 68.808000] bridge-eth0: already up
[ 68.808000] bridge-eth0: attached
[ 69.024000] /dev/vmnet: open called by PID 5427 (vmnet-natd)
[ 69.024000] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 69.024000] /dev/vmnet: port on hub 8 successfully opened
[ 69.260000] Bluetooth: Core ver 2.11
[ 69.260000] NET: Registered protocol family 31
[ 69.260000] Bluetooth: HCI device and connection manager initialized
[ 69.260000] Bluetooth: HCI socket layer initialized
[ 69.372000] Bluetooth: L2CAP ver 2.8
[ 69.372000] Bluetooth: L2CAP socket layer initialized
[ 69.508000] Bluetooth: RFCOMM socket layer initialized
[ 69.508000] Bluetooth: RFCOMM TTY layer initialized
[ 69.508000] Bluetooth: RFCOMM ver 1.8
[ 78.864000] /dev/vmnet: open called by PID 5695 (vmnet-netifup)
[ 78.864000] /dev/vmnet: port on hub 8 successfully opened
[ 78.884000] /dev/vmnet: open called by PID 5696 (vmnet-netifup)
[ 78.884000] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 78.884000] /dev/vmnet: port on hub 1 successfully opened
[ 79.068000] /dev/vmnet: open called by PID 5718 (vmnet-dhcpd)
[ 79.068000] /dev/vmnet: port on hub 1 successfully opened
[ 79.068000] /dev/vmnet: open called by PID 5707 (vmnet-dhcpd)
[ 79.072000] /dev/vmnet: port on hub 8 successfully opened
[ 89.836000] vmnet8: no IPv6 routers present
[ 89.892000] vmnet1: no IPv6 routers present
*** cat /proc/interrupts ***
           CPU0
  0: 299311 IO-APIC-edge timer
  1: 4827 IO-APIC-edge i8042
  7: 0 IO-APIC-edge parport0
  8: 3 IO-APIC-edge rtc
  9: 2621 IO-APIC-fasteoi acpi
 12: 52881 IO-APIC-edge i8042
 14: 33291 IO-APIC-edge libata
 15: 12712 IO-APIC-edge libata
 17: 3434 IO-APIC-fasteoi uhci_hcd:usb1, yenta, eth0
 19: 0 IO-APIC-fasteoi uhci_hcd:usb2, sdhci:slot0
 20: 0 IO-APIC-fasteoi uhci_hcd:usb3
 21: 87 IO-APIC-fasteoi uhci_hcd:usb4, ehci_hcd:usb5
 22: 11743 IO-APIC-fasteoi ipw2200
 23: 10212 IO-APIC-fasteoi Intel ICH6
NMI: 0
LOC: 93524
ERR: 0
MIS: 0

Daniel T Chen (crimsun) wrote :

Mute both jack sense mixer controls.

Michael Greifeneder (mikegr) wrote :

After I muted those senses I heard a very loud noise, a whistle. I realized that all input devices were at 100% level. I reduced them and switched off senses again. Now sound works. I can hear sound again.

OK, I didn't know that these switches are that important. I didn't change anything after upgrade and when you only hear a loud whistle you would keep it as it is.

Thanks.

Changed in linux-source-2.6.20:
status: Needs Info → Rejected
To post a comment you must log in.
This report contains Public information  Edit
Everyone can see this information.

Other bug subscribers