[ 0.000000] Linux version 2.6.24-3-generic (buildd@vernadsky) (gcc version 4.2.3 20071223 (prerelease) (Ubuntu 4.2.2-4ubuntu3)) #1 SMP Thu Jan 3 23:30:29 UTC 2008 (Ubuntu 2.6.24-3.5-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fedf800 (usable) [ 0.000000] BIOS-e820: 000000007fedf800 - 000000007fee0000 (reserved) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5ef0 [ 0.000000] Entering add_active_range(0, 0, 523999) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523999 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523999 [ 0.000000] On node 0 totalpages: 523999 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292322 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7FA0 checksum 0 [ 0.000000] ACPI: RSDP 000F7FA0, 0014 (r0 HP-CPC) [ 0.000000] ACPI: RSDT 7FEE3040, 0038 (r1 HP-CPC AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7FEE30C0, 0074 (r1 HP-CPC AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7FEE3180, 551D (r1 HP-CPC AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 7FEE0000, 0040 [ 0.000000] ACPI: MCFG 7FEE8800, 003C (r1 HP-CPC AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 7FEE8700, 0084 (r1 HP-CPC AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: SSDT 7FEE8880, 015C (r1 HP-CPC Cpu0Ist 3000 INTL 20040311) [ 0.000000] ACPI: SSDT 7FEE8D10, 0275 (r1 HP-CPC CpuPm 3000 INTL 20040311) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519906 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 3401.195 MHz processor. [ 26.304607] Console: colour VGA+ 80x25 [ 26.304611] console [tty0] enabled [ 26.304940] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 26.305269] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 26.405106] Memory: 2065892k/2095996k available (2127k kernel code, 28828k reserved, 988k data, 364k init, 1178492k highmem) [ 26.405114] virtual kernel memory layout: [ 26.405115] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 26.405116] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 26.405117] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 26.405118] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 26.405118] .init : 0xc0411000 - 0xc046c000 ( 364 kB) [ 26.405119] .data : 0xc0313c7d - 0xc040ad64 ( 988 kB) [ 26.405120] .text : 0xc0100000 - 0xc0313c7d (2127 kB) [ 26.405123] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 26.405161] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 26.485163] Calibrating delay using timer specific routine.. 6808.55 BogoMIPS (lpj=13617113) [ 26.485189] Security Framework initialized [ 26.485194] SELinux: Disabled at boot. [ 26.485198] Capability LSM initialized [ 26.485209] Mount-cache hash table entries: 512 [ 26.485333] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000 00000000 [ 26.485341] monitor/mwait feature present. [ 26.485343] using mwait in idle threads. [ 26.485349] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 26.485352] CPU: L2 cache: 2048K [ 26.485354] CPU: Physical Processor ID: 0 [ 26.485356] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000649d 00000000 00000000 00000000 [ 26.485367] Compat vDSO mapped to ffffe000. [ 26.485382] Checking 'hlt' instruction... OK. [ 26.501581] SMP alternatives: switching to UP code [ 26.503310] Early unpacking initramfs... done [ 26.769411] ACPI: Core revision 20070126 [ 26.769464] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 26.779497] CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03 [ 26.779517] SMP alternatives: switching to SMP code [ 26.780242] Booting processor 1/1 eip 3000 [ 26.790560] Initializing CPU#1 [ 26.869066] Calibrating delay using timer specific routine.. 6802.44 BogoMIPS (lpj=13604888) [ 26.869076] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000 00000000 [ 26.869083] monitor/mwait feature present. [ 26.869089] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 26.869092] CPU: L2 cache: 2048K [ 26.869094] CPU: Physical Processor ID: 0 [ 26.869096] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000649d 00000000 00000000 00000000 [ 26.869589] CPU1: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03 [ 26.869627] Total of 2 processors activated (13611.00 BogoMIPS). [ 26.869774] ENABLING IO-APIC IRQs [ 26.869948] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 27.017154] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 27.422903] Brought up 2 CPUs [ 27.422933] CPU0 attaching sched-domain: [ 27.422936] domain 0: span 03 [ 27.422938] groups: 01 02 [ 27.422942] domain 1: span 03 [ 27.422943] groups: 03 [ 27.422946] CPU1 attaching sched-domain: [ 27.422947] domain 0: span 03 [ 27.422949] groups: 02 01 [ 27.422952] domain 1: span 03 [ 27.422953] groups: 03 [ 27.423221] net_namespace: 64 bytes [ 27.423230] Booting paravirtualized kernel on bare hardware [ 27.423852] Time: 22:10:50 Date: 01/21/08 [ 27.423912] NET: Registered protocol family 16 [ 27.424145] EISA bus registered [ 27.424151] ACPI: bus type pci registered [ 27.451787] PCI: PCI BIOS revision 3.00 entry at 0xf1e60, last bus=2 [ 27.451789] PCI: Using configuration type 1 [ 27.451791] Setting up standard PCI resources [ 27.463825] ACPI: EC: Look up EC in DSDT [ 27.469744] ACPI: Interpreter enabled [ 27.469750] ACPI: (supports S0 S1 S3 S4 S5) [ 27.469770] ACPI: Using IOAPIC for interrupt routing [ 27.475193] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.475677] Force enabled HPET at base address 0xfed00000 [ 27.475684] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 27.475687] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 27.476290] PCI: Transparent bridge - 0000:00:1e.0 [ 27.476316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.476517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 27.488296] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 27.488439] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.488579] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.488719] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 27.488857] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 27.489021] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.489162] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.489304] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.489457] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.489493] pnp: PnP ACPI init [ 27.489502] ACPI: bus type pnp registered [ 27.492109] pnpacpi: exceeded the max number of mem resources: 12 [ 27.492216] pnp: PnP ACPI: found 12 devices [ 27.492218] ACPI: ACPI bus type pnp unregistered [ 27.492222] PnPBIOS: Disabled by ACPI PNP [ 27.492459] PCI: Using ACPI for IRQ routing [ 27.492462] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.522869] NET: Registered protocol family 8 [ 27.522872] NET: Registered protocol family 20 [ 27.522984] hpet clockevent registered [ 27.522990] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 27.522994] hpet0: 3 64-bit timers, 14318180 Hz [ 27.524931] Time: tsc clocksource has been installed. [ 27.538913] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 27.538917] system 00:01: ioport range 0x800-0x87f has been reserved [ 27.538920] system 00:01: ioport range 0x880-0x88f has been reserved [ 27.538931] system 00:08: ioport range 0x400-0x4bf could not be reserved [ 27.538939] system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 27.538946] system 00:0b: iomem range 0xcf000-0xcffff has been reserved [ 27.538949] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved [ 27.538952] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 27.538955] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 27.538958] system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved [ 27.538961] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 27.538964] system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved [ 27.538967] system 00:0b: iomem range 0x0-0x0 could not be reserved [ 27.538970] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 27.538974] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved [ 27.538977] system 00:0b: iomem range 0xffb00000-0xffb7ffff could not be reserved [ 27.538984] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved [ 27.569488] PCI: Bridge: 0000:00:01.0 [ 27.569490] IO window: disabled. [ 27.569494] MEM window: f4000000-fbffffff [ 27.569497] PREFETCH window: e0000000-efffffff [ 27.569501] PCI: Bridge: 0000:00:1e.0 [ 27.569504] IO window: e000-efff [ 27.569509] MEM window: fde00000-fdefffff [ 27.569512] PREFETCH window: disabled. [ 27.569527] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 27.569533] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 27.569543] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 27.569554] NET: Registered protocol family 2 [ 27.606937] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 27.607210] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 27.607716] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 27.607967] TCP: Hash tables configured (established 131072 bind 65536) [ 27.607970] TCP reno registered [ 27.619013] checking if image is initramfs... it is [ 28.024840] Switched to high resolution mode on CPU 0 [ 28.026766] Switched to high resolution mode on CPU 1 [ 28.142508] Freeing initrd memory: 7512k freed [ 28.143316] audit: initializing netlink socket (disabled) [ 28.143329] audit(1200953450.228:1): initialized [ 28.143556] highmem bounce pool size: 64 pages [ 28.145609] VFS: Disk quotas dquot_6.5.1 [ 28.145694] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 28.145854] AppArmor: Unable to register AppArmor [ 28.145915] io scheduler noop registered [ 28.145918] io scheduler anticipatory registered [ 28.145919] io scheduler deadline registered [ 28.145930] io scheduler cfq registered (default) [ 28.146019] Boot video device is 0000:01:00.0 [ 28.146026] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 28.146145] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 28.146184] assign_interrupt_mode Found MSI capability [ 28.146217] Allocate Port Service[0000:00:01.0:pcie00] [ 28.146491] isapnp: Scanning for PnP cards... [ 28.498344] isapnp: No Plug & Play device found [ 28.530943] Real Time Clock Driver v1.12ac [ 28.531058] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 28.532363] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 28.532434] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 28.532541] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 28.532544] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 28.533072] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 28.549726] mice: PS/2 mouse device common for all mice [ 28.549867] EISA: Probing bus 0 at eisa.0 [ 28.549896] EISA: Detected 0 cards. [ 28.549900] cpuidle: using governor ladder [ 28.549901] cpuidle: using governor menu [ 28.549967] TCP cubic registered [ 28.549976] NET: Registered protocol family 1 [ 28.550002] Using IPI No-Shortcut mode [ 28.550114] Magic number: 8:497:199 [ 28.550147] hash matches device ttype [ 28.550418] Freeing unused kernel memory: 364k freed [ 28.576942] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 29.757096] fuse init (API version 7.9) [ 29.763004] ACPI: Fan [FAN] (on) [ 29.769148] ACPI: SSDT 7FEE8C80, 0087 (r1 HP-CPC Cpu1Ist 3000 INTL 20040311) [ 29.769355] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 29.769368] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 29.784515] ACPI: Thermal Zone [THRM] (40 C) [ 29.929299] usbcore: registered new interface driver usbfs [ 29.929329] usbcore: registered new interface driver hub [ 29.938150] usbcore: registered new device driver usb [ 29.946156] USB Universal Host Controller Interface driver v3.0 [ 29.946220] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17 [ 29.946235] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 29.946240] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 29.946464] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 29.946499] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff00 [ 29.946682] usb usb1: configuration #1 chosen from 1 choice [ 29.946720] hub 1-0:1.0: USB hub found [ 29.946728] hub 1-0:1.0: 2 ports detected [ 30.049318] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 30.049334] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 30.049340] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 30.049374] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 30.049406] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000fe00 [ 30.049554] usb usb2: configuration #1 chosen from 1 choice [ 30.049588] hub 2-0:1.0: USB hub found [ 30.049596] hub 2-0:1.0: 2 ports detected [ 30.153312] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 30.153327] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 30.153333] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 30.153364] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 30.153395] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000fd00 [ 30.153549] usb usb3: configuration #1 chosen from 1 choice [ 30.153581] hub 3-0:1.0: USB hub found [ 30.153589] hub 3-0:1.0: 2 ports detected [ 30.257254] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 30.257270] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 30.257276] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 30.257312] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 30.257345] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00 [ 30.257495] usb usb4: configuration #1 chosen from 1 choice [ 30.257531] hub 4-0:1.0: USB hub found [ 30.257539] hub 4-0:1.0: 2 ports detected [ 30.289162] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 30.290847] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 30.290851] e100: Copyright(c) 1999-2006 Intel Corporation [ 30.361316] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17 [ 30.361337] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 30.361342] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 30.361381] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 30.365296] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 30.365307] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xfdfff000 [ 30.381996] SCSI subsystem initialized [ 30.416093] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 30.416248] usb usb5: configuration #1 chosen from 1 choice [ 30.416284] hub 5-0:1.0: USB hub found [ 30.416293] hub 5-0:1.0: 8 ports detected [ 30.480466] libata version 3.00 loaded. [ 30.520347] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 30.573157] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 30.580014] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 30.607071] e100: eth0: e100_probe: addr 0xfdefd000, irq 20, MAC addr 00:15:f2:ea:e6:8a [ 30.607212] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19 [ 30.607256] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 30.607273] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 30.607306] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 [ 30.607334] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 30.607347] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 30.612303] ata_piix 0000:00:1f.1: version 2.12 [ 30.612322] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19 [ 30.612363] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 30.612782] scsi0 : ata_piix [ 30.612850] scsi1 : ata_piix [ 30.613507] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14 [ 30.613513] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15 [ 30.815973] usb 1-1: device not accepting address 2, error -71 [ 31.120238] ata1.00: ATAPI: TSSTcorpCD/DVDW TS-H552L, 0614, max UDMA/33 [ 31.120261] ata1.01: ATAPI: IDE-DVD DROM6216, HD08, max UDMA/100 [ 31.120275] ata1.01: limited to UDMA/33 due to 40-wire cable [ 31.316109] ata1.00: configured for UDMA/33 [ 31.488060] ata1.01: configured for UDMA/33 [ 31.488107] ata2: port disabled. ignoring. [ 31.489026] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552L 0614 PQ: 0 ANSI: 5 [ 31.491806] usb 5-1: new high speed USB device using ehci_hcd and address 2 [ 31.499999] scsi 0:0:1:0: CD-ROM IDE-DVD DROM6216 HD08 PQ: 0 ANSI: 5 [ 31.500100] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 31.500125] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 [ 31.500167] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 31.500241] scsi2 : ata_piix [ 31.500301] scsi3 : ata_piix [ 31.500986] ata3: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 18 [ 31.500989] ata4: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 18 [ 31.624260] usb 5-1: configuration #1 chosen from 1 choice [ 31.624424] hub 5-1:1.0: USB hub found [ 31.624510] hub 5-1:1.0: 4 ports detected [ 31.667932] ata3.00: ATA-7: ST3250823AS, 3.03, max UDMA/100 [ 31.667936] ata3.00: 488397168 sectors, multi 16: LBA48 [ 31.675941] ata3.00: configured for UDMA/100 [ 31.842030] scsi 2:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5 [ 31.848824] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800009a2e8e] [ 31.857086] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 31.857112] sd 2:0:0:0: [sda] Write Protect is off [ 31.857116] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 31.857143] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.857203] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 31.857218] sd 2:0:0:0: [sda] Write Protect is off [ 31.857222] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 31.857247] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.857251] sda:sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 31.866739] Uniform CD-ROM driver Revision: 3.20 [ 31.866797] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 31.867722] sr1: scsi3-mmc drive: 12x/40x cd/rw xa/form2 cdda tray [ 31.867786] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 31.877920] sda1 sda2 sda3 sda4 < sda5 > [ 31.902133] sd 2:0:0:0: [sda] Attached SCSI disk [ 31.910758] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 31.910787] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 31.910814] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 32.151597] usb 5-4: new high speed USB device using ehci_hcd and address 4 [ 32.284602] usb 5-4: configuration #1 chosen from 1 choice [ 32.763413] usb 1-2: new low speed USB device using uhci_hcd and address 4 [ 32.834076] kjournald starting. Commit interval 5 seconds [ 32.834088] EXT3-fs: mounted filesystem with ordered data mode. [ 32.940874] usb 1-2: configuration #1 chosen from 1 choice [ 33.191297] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 33.364682] usb 4-1: configuration #1 chosen from 1 choice [ 33.367713] usbcore: registered new interface driver hiddev [ 33.382817] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input2 [ 33.403279] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2 [ 33.432708] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input3 [ 33.443286] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2 [ 33.443320] usbcore: registered new interface driver usbhid [ 33.443325] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 33.443705] usbcore: registered new interface driver libusual [ 33.466781] Initializing USB Mass Storage driver... [ 33.466882] scsi4 : SCSI emulation for USB Mass Storage devices [ 33.466971] usbcore: registered new interface driver usb-storage [ 33.466977] USB Mass Storage support registered. [ 33.467101] usb-storage: device found at 2 [ 33.467104] usb-storage: waiting for device to settle before scanning [ 38.463200] usb-storage: device scan complete [ 38.466197] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 38.469197] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 38.471201] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 38.474200] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 38.480246] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 38.480300] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 38.485242] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 38.485299] sd 4:0:0:1: Attached scsi generic sg4 type 0 [ 38.490236] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 38.490289] sd 4:0:0:2: Attached scsi generic sg5 type 0 [ 38.495227] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 38.495278] sd 4:0:0:3: Attached scsi generic sg6 type 0 [ 41.690004] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 41.792349] ISO 9660 Extensions: RRIP_1991A [ 42.082211] Registering unionfs 1.4 [ 42.082215] unionfs: debugging is not enabled [ 42.090627] loop: module loaded [ 42.409584] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 109.536357] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 109.758835] Linux agpgart interface v0.102 [ 110.520110] input: Power Button (FF) as /devices/virtual/input/input5 [ 110.533750] ACPI: Power Button (FF) [PWRF] [ 110.533830] input: Power Button (CM) as /devices/virtual/input/input6 [ 110.545738] ACPI: Power Button (CM) [PWRB] [ 111.475125] iTCO_vendor_support: vendor-support=0 [ 111.545740] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 111.863061] parport_pc 00:06: reported by Plug and Play ACPI [ 111.863122] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 112.548201] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 112.548307] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 112.548348] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 113.310008] intel_rng: FWH not detected [ 113.322378] usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x2917 [ 113.322399] usbcore: registered new interface driver usblp [ 113.437024] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 115.586807] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 115.590993] Audigy2 value: Special config. [ 117.242583] Adding 4931912k swap on /dev/sda5. Priority:-1 extents:1 across:4931912k [ 119.781683] No dock devices found. [ 120.044586] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 126.173196] avahi-daemon[8209]: segfault at 00000000 eip 0804d82b esp bfd0cdb0 error 4 [ 146.319465] lp0: using parport0 (interrupt-driven). [ 146.441700] ppdev: user-space parallel port driver [ 156.404474] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 157.521060] Bluetooth: Core ver 2.11 [ 157.521157] NET: Registered protocol family 31 [ 157.521161] Bluetooth: HCI device and connection manager initialized [ 157.521167] Bluetooth: HCI socket layer initialized [ 158.455332] Bluetooth: L2CAP ver 2.9 [ 158.455339] Bluetooth: L2CAP socket layer initialized [ 159.284422] Bluetooth: RFCOMM socket layer initialized [ 159.284438] Bluetooth: RFCOMM TTY layer initialized [ 159.284442] Bluetooth: RFCOMM ver 1.8 [ 161.437589] NET: Registered protocol family 17 [ 169.921783] NET: Registered protocol family 10 [ 169.922168] lo: Disabled Privacy Extensions [ 180.684295] eth0: no IPv6 routers present