[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-11.35-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[17179569.184000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[17179569.184000] 1151MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f59a0
[17179569.184000] On node 0 totalpages: 524272
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 294896 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 IntelR                                ) @ 0x000f7560
[17179569.184000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff3040
[17179569.184000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff30c0
[17179569.184000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff6e00
[17179569.184000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdb1 ro quiet splash 
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 3061.025 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.924000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179571.924000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.996000] Memory: 2069332k/2097088k available (1911k kernel code, 26352k reserved, 1073k data, 308k init, 1179584k highmem)
[17179571.996000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179572.076000] Calibrating delay using timer specific routine.. 6127.37 BogoMIPS (lpj=12254742)
[17179572.076000] Security Framework v1.0.0 initialized
[17179572.076000] SELinux:  Disabled at boot.
[17179572.076000] Mount-cache hash table entries: 512
[17179572.076000] CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000
[17179572.076000] CPU: After vendor identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000
[17179572.076000] monitor/mwait feature present.
[17179572.076000] using mwait in idle threads.
[17179572.076000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179572.076000] CPU: L2 cache: 1024K
[17179572.076000] CPU: Hyper-Threading is disabled
[17179572.076000] CPU: After all inits, caps: bfebfbff 00100000 00000000 00000180 0000441d 00000000 00000000
[17179572.076000] Checking 'hlt' instruction... OK.
[17179572.092000] SMP alternatives: switching to UP code
[17179572.092000] checking if image is initramfs... it is
[17179572.512000] Freeing initrd memory: 5327k freed
[17179572.512000] ACPI: Core revision 20060707
[17179572.516000] ACPI: Looking for DSDT ... not found!
[17179572.528000] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[17179572.528000] SMP alternatives: switching to SMP code
[17179572.528000] Booting processor 1/1 eip 3000
[17179572.536000] Initializing CPU#1
[17179572.620000] Calibrating delay using timer specific routine.. 6121.65 BogoMIPS (lpj=12243311)
[17179572.620000] CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000
[17179572.620000] CPU: After vendor identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000
[17179572.620000] monitor/mwait feature present.
[17179572.620000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179572.620000] CPU: L2 cache: 1024K
[17179572.620000] CPU: Hyper-Threading is disabled
[17179572.620000] CPU: After all inits, caps: bfebfbff 00100000 00000000 00000180 0000441d 00000000 00000000
[17179572.620000] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[17179572.620000] Total of 2 processors activated (12249.02 BogoMIPS).
[17179572.620000] ENABLING IO-APIC IRQs
[17179572.620000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179572.764000] checking TSC synchronization across 2 CPUs: passed.
[17179572.768000] Brought up 2 CPUs
[17179572.928000] migration_cost=8000
[17179572.928000] NET: Registered protocol family 16
[17179572.928000] EISA bus registered
[17179572.928000] ACPI: bus type pci registered
[17179572.940000] PCI: PCI BIOS revision 2.10 entry at 0xfba80, last bus=2
[17179572.940000] PCI: Using configuration type 1
[17179572.940000] Setting up standard PCI resources
[17179572.948000] ACPI: Interpreter enabled
[17179572.948000] ACPI: Using IOAPIC for interrupt routing
[17179572.948000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.948000] PCI: Probing PCI hardware (bus 00)
[17179572.948000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[17179572.948000] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[17179572.948000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179572.948000] Boot video device is 0000:01:00.0
[17179572.952000] PCI: Transparent bridge - 0000:00:1e.0
[17179572.952000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.960000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179572.964000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[17179572.964000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[17179572.964000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179572.964000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[17179572.964000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[17179572.964000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[17179572.964000] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15)
[17179572.964000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179572.964000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.964000] pnp: PnP ACPI init
[17179572.968000] pnp: PnP ACPI: found 13 devices
[17179572.968000] PnPBIOS: Disabled by ACPI PNP
[17179572.968000] PCI: Using ACPI for IRQ routing
[17179572.968000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179572.992000] pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
[17179572.992000] PCI: Bridge: 0000:00:01.0
[17179572.992000]   IO window: a000-afff
[17179572.992000]   MEM window: f8000000-f9ffffff
[17179572.992000]   PREFETCH window: e8000000-f7ffffff
[17179572.992000] PCI: Bridge: 0000:00:1e.0
[17179572.992000]   IO window: 8000-9fff
[17179572.992000]   MEM window: fa000000-fa0fffff
[17179572.992000]   PREFETCH window: disabled.
[17179572.992000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179572.992000] NET: Registered protocol family 2
[17179573.036000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179573.036000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[17179573.036000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179573.036000] TCP: Hash tables configured (established 262144 bind 65536)
[17179573.036000] TCP reno registered
[17179573.036000] audit: initializing netlink socket (disabled)
[17179573.036000] audit(1175178700.036:1): initialized
[17179573.036000] highmem bounce pool size: 64 pages
[17179573.036000] VFS: Disk quotas dquot_6.5.1
[17179573.036000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.036000] Initializing Cryptographic API
[17179573.036000] io scheduler noop registered
[17179573.036000] io scheduler anticipatory registered
[17179573.036000] io scheduler deadline registered
[17179573.036000] io scheduler cfq registered (default)
[17179573.040000] isapnp: Scanning for PnP cards...
[17179573.388000] isapnp: No Plug & Play device found
[17179573.416000] Real Time Clock Driver v1.12ac
[17179573.416000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179573.416000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.416000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.416000] mice: PS/2 mouse device common for all mice
[17179573.416000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.416000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.416000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.416000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179573.416000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179573.420000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179573.420000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.420000] EISA: Probing bus 0 at eisa.0
[17179573.420000] Cannot allocate resource for EISA slot 8
[17179573.420000] EISA: Detected 0 cards.
[17179573.420000] TCP bic registered
[17179573.420000] NET: Registered protocol family 1
[17179573.420000] NET: Registered protocol family 8
[17179573.420000] NET: Registered protocol family 20
[17179573.420000] Starting balanced_irq
[17179573.420000] Using IPI No-Shortcut mode
[17179573.420000] ACPI: (supports S0 S3 S4 S5)
[17179573.420000] Freeing unused kernel memory: 308k freed
[17179573.636000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.492000] Capability LSM initialized
[17179574.904000] ICH5: IDE controller at PCI slot 0000:00:1f.1
[17179574.904000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
[17179574.904000] ICH5: chipset revision 2
[17179574.904000] ICH5: not 100% native mode: will probe irqs later
[17179574.904000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
[17179574.904000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
[17179574.904000] Probing IDE interface ide0...
[17179575.192000] hda: ST3320620A, ATA DISK drive
[17179575.472000] hdb: ST380011A, ATA DISK drive
[17179575.528000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.536000] Probing IDE interface ide1...
[17179576.272000] hdc: SONY CD-RW CRX230ED, ATAPI CD/DVD-ROM drive
[17179577.056000] hdd: ASUS DVD-E616P2, ATAPI CD/DVD-ROM drive
[17179577.112000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.124000] hda: max request size: 512KiB
[17179577.164000] hda: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63, UDMA(100)
[17179577.188000] hda: cache flushes supported
[17179577.188000]  hda: hda1 hda2 hda3 < hda5 >
[17179577.232000] hdb: max request size: 512KiB
[17179577.232000] hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[17179577.232000] hdb: cache flushes supported
[17179577.232000]  hdb: hdb1 hdb2 < hdb5 >
[17179577.284000] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179577.284000] Uniform CD-ROM driver Revision: 3.20
[17179577.288000] hdd: ATAPI 15X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179577.580000] SCSI subsystem initialized
[17179577.580000] libata version 1.20 loaded.
[17179577.584000] ata_piix 0000:00:1f.2: version 1.05
[17179577.584000] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
[17179577.584000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179577.584000] ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 169
[17179577.584000] ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 169
[17179577.748000] scsi0 : ata_piix
[17179577.916000] scsi1 : ata_piix
[17179577.984000] usbcore: registered new driver usbfs
[17179577.984000] usbcore: registered new driver hub
[17179577.984000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 177
[17179577.984000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179577.984000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179577.984000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[17179577.984000] ehci_hcd 0000:00:1d.7: debug port 1
[17179577.984000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179577.984000] ehci_hcd 0000:00:1d.7: irq 177, io mem 0xfa100000
[17179577.988000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.988000] usb usb1: configuration #1 chosen from 1 choice
[17179577.988000] hub 1-0:1.0: USB hub found
[17179577.988000] hub 1-0:1.0: 8 ports detected
[17179577.992000] USB Universal Host Controller Interface driver v3.0
[17179578.036000] ieee1394: Initialized config rom entry `ip1394'
[17179578.092000] ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 20 (level, low) -> IRQ 185
[17179578.092000] ehci_hcd 0000:02:06.2: EHCI Host Controller
[17179578.092000] ehci_hcd 0000:02:06.2: new USB bus registered, assigned bus number 2
[17179578.092000] ehci_hcd 0000:02:06.2: irq 185, io mem 0xfa00b000
[17179578.092000] ehci_hcd 0000:02:06.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
[17179578.092000] usb usb2: configuration #1 chosen from 1 choice
[17179578.092000] hub 2-0:1.0: USB hub found
[17179578.092000] hub 2-0:1.0: 4 ports detected
[17179578.196000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 185
[17179578.208000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179578.208000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179578.208000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179578.208000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[17179578.208000] uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000bc00
[17179578.208000] usb usb3: configuration #1 chosen from 1 choice
[17179578.208000] hub 3-0:1.0: USB hub found
[17179578.208000] hub 3-0:1.0: 2 ports detected
[17179578.248000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185]  MMIO=[fa00a000-fa00a7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[17179578.248000] ACPI: PCI Interrupt 0000:02:05.2[B] -> GSI 22 (level, low) -> IRQ 201
[17179578.296000] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[201]  MMIO=[fa009000-fa0097ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[17179578.312000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 209
[17179578.312000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179578.312000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179578.312000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[17179578.312000] uhci_hcd 0000:00:1d.1: irq 209, io base 0x0000b000
[17179578.312000] usb usb4: configuration #1 chosen from 1 choice
[17179578.312000] hub 4-0:1.0: USB hub found
[17179578.312000] hub 4-0:1.0: 2 ports detected
[17179578.416000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
[17179578.416000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179578.416000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179578.416000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[17179578.416000] uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000b400
[17179578.416000] usb usb5: configuration #1 chosen from 1 choice
[17179578.416000] hub 5-0:1.0: USB hub found
[17179578.416000] hub 5-0:1.0: 2 ports detected
[17179578.520000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 193
[17179578.520000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179578.520000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179578.520000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 6
[17179578.520000] uhci_hcd 0000:00:1d.3: irq 193, io base 0x0000b800
[17179578.520000] usb usb6: configuration #1 chosen from 1 choice
[17179578.520000] hub 6-0:1.0: USB hub found
[17179578.520000] hub 6-0:1.0: 2 ports detected
[17179578.624000] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 22 (level, low) -> IRQ 201
[17179578.624000] PCI: Via IRQ fixup for 0000:02:06.0, from 3 to 9
[17179578.624000] uhci_hcd 0000:02:06.0: UHCI Host Controller
[17179578.624000] uhci_hcd 0000:02:06.0: new USB bus registered, assigned bus number 7
[17179578.624000] uhci_hcd 0000:02:06.0: irq 201, io base 0x00008c00
[17179578.624000] usb usb7: configuration #1 chosen from 1 choice
[17179578.624000] hub 7-0:1.0: USB hub found
[17179578.624000] hub 7-0:1.0: 2 ports detected
[17179578.648000] hub 2-0:1.0: over-current change on port 3
[17179578.728000] ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 23 (level, low) -> IRQ 177
[17179578.728000] PCI: Via IRQ fixup for 0000:02:06.1, from 11 to 1
[17179578.728000] uhci_hcd 0000:02:06.1: UHCI Host Controller
[17179578.728000] uhci_hcd 0000:02:06.1: new USB bus registered, assigned bus number 8
[17179578.728000] uhci_hcd 0000:02:06.1: irq 177, io base 0x00009000
[17179578.728000] usb usb8: configuration #1 chosen from 1 choice
[17179578.728000] hub 8-0:1.0: USB hub found
[17179578.728000] hub 8-0:1.0: 2 ports detected
[17179578.752000] hub 2-0:1.0: over-current change on port 4
[17179578.972000] kjournald starting.  Commit interval 5 seconds
[17179578.972000] EXT3-fs: mounted filesystem with ordered data mode.
[17179579.096000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[17179579.276000] usb 3-1: configuration #1 chosen from 1 choice
[17179579.520000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00d0035600a86eb7]
[17179579.528000] usb 7-1: new low speed USB device using uhci_hcd and address 2
[17179579.704000] usb 7-1: configuration #1 chosen from 1 choice
[17179579.792000] ieee1394: Host added: ID:BUS[1-00:1023]  GUID[00023c015112f3fa]
[17179579.960000] usb 7-2: new low speed USB device using uhci_hcd and address 3
[17179580.144000] usb 7-2: configuration #1 chosen from 1 choice
[17179588.600000] Floppy drive(s): fd0 is 1.44M
[17179588.624000] FDC 0 is a post-1991 82077
[17179588.844000] gameport: EMU10K1 is pci0000:02:05.1/gameport0, io 0x8800, speed 1147kHz
[17179588.912000] input: PC Speaker as /class/input/input1
[17179588.928000] Linux agpgart interface v0.101 (c) Dave Jones
[17179588.952000] agpgart: Detected an Intel 865 Chipset.
[17179588.960000] agpgart: AGP aperture is 128M @ 0xe0000000
[17179589.272000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179589.276000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179589.296000] 8139too Fast Ethernet driver 0.9.27
[17179589.296000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 169
[17179589.296000] eth0: RealTek RTL8139 at 0xf89ea000, 00:50:8d:6c:f3:f4, IRQ 169
[17179589.296000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[17179589.312000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179589.344000] parport: PnPBIOS parport detected.
[17179589.344000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179589.880000] usbcore: registered new driver hiddev
[17179589.944000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 217
[17179589.944000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179589.948000] input: Genius Wireless Optical Mouse as /class/input/input2
[17179589.948000] input: USB HID v1.00 Mouse [Genius Wireless Optical Mouse] on usb-0000:00:1d.0-1
[17179589.984000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179589.984000] input: CH PRODUCTS CH COMBATSTICK USB as /class/input/input3
[17179589.984000] input: USB HID v1.00 Joystick [CH PRODUCTS CH COMBATSTICK USB] on usb-0000:02:06.0-1
[17179590.000000] input: CH PRODUCTS CH PRO PEDALS USB  as /class/input/input4
[17179590.000000] input: USB HID v1.00 Joystick [CH PRODUCTS CH PRO PEDALS USB ] on usb-0000:02:06.0-2
[17179590.000000] usbcore: registered new driver usbhid
[17179590.000000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179590.128000] ts: Compaq touchscreen protocol output
[17179590.264000] intel8x0_measure_ac97_clock: measured 57700 usecs
[17179590.264000] intel8x0: clocking to 48000
[17179590.268000] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 225
[17179590.272000] Installing spdif_bug patch: Audigy 2 ZS [SB0350]
[17179590.492000] hw_random hardware driver 1.0.0 loaded
[17179590.684000] lp0: using parport0 (interrupt-driven).
[17179590.704000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179590.704000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179590.848000] EXT3 FS on hdb1, internal journal
[17179591.092000] NET: Registered protocol family 17
[17179592.284000] NET: Registered protocol family 10
[17179592.284000] lo: Disabled Privacy Extensions
[17179592.288000] IPv6 over IPv4 tunneling driver
[17179596.584000] ACPI: Power Button (FF) [PWRF]
[17179596.584000] ACPI: Power Button (CM) [PWRB]
[17179596.728000] ibm_acpi: ec object not found
[17179596.768000] pcc_acpi: loading...
[17179598.836000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179598.840000] [fglrx] Maximum main memory to use for locked dma buffers: 1899 MBytes.
[17179598.840000] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0
[17179598.892000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179599.188000] apm: BIOS not found.
[17179600.180000] [fglrx] Internal AGP support requested, but kernel AGP support active.
[17179600.180000] [fglrx] Have to use kernel AGP support to avoid conflicts.
[17179600.180000] [fglrx] AGP detected, AgpState   = 0x1f004a1b (hardware caps of chipset)
[17179600.180000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179600.180000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179600.180000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179600.180000] [fglrx] AGP enabled,  AgpCommand = 0x1f004312 (selected caps)
[17179600.192000] [fglrx] total      GART = 134217728
[17179600.192000] [fglrx] free       GART = 118222848
[17179600.192000] [fglrx] max single GART = 118222848
[17179600.192000] [fglrx] total      LFB  = 126873600
[17179600.192000] [fglrx] free       LFB  = 116387840
[17179600.192000] [fglrx] max single LFB  = 116387840
[17179600.192000] [fglrx] total      Inv  = 134217728
[17179600.192000] [fglrx] free       Inv  = 134217728
[17179600.192000] [fglrx] max single Inv  = 134217728
[17179600.192000] [fglrx] total      TIM  = 0
[17179602.428000] eth0: no IPv6 routers present
[17179604.088000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179604.088000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179604.088000] ide: failed opcode was: unknown
[17179604.088000] end_request: I/O error, dev hdd, sector 786432
[17179604.088000] Buffer I/O error on device hdd, logical block 98304
[17179604.136000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179604.136000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179604.136000] ide: failed opcode was: unknown
[17179604.136000] end_request: I/O error, dev hdd, sector 786432
[17179604.136000] Buffer I/O error on device hdd, logical block 98304
[17179604.184000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179604.184000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179604.184000] ide: failed opcode was: unknown
[17179604.184000] end_request: I/O error, dev hdd, sector 786432
[17179604.184000] Buffer I/O error on device hdd, logical block 98304
[17179604.232000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179604.232000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179604.232000] ide: failed opcode was: unknown
[17179604.232000] end_request: I/O error, dev hdd, sector 786440
[17179604.232000] Buffer I/O error on device hdd, logical block 98305
[17179604.280000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179604.280000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179604.280000] ide: failed opcode was: unknown
[17179604.280000] end_request: I/O error, dev hdd, sector 786448
[17179604.280000] Buffer I/O error on device hdd, logical block 98306
[17179604.328000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179604.328000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179604.328000] ide: failed opcode was: unknown
[17179604.328000] end_request: I/O error, dev hdd, sector 786456
[17179604.328000] Buffer I/O error on device hdd, logical block 98307
[17179604.376000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179604.376000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179604.376000] ide: failed opcode was: unknown
[17179604.376000] end_request: I/O error, dev hdd, sector 786464
[17179604.376000] Buffer I/O error on device hdd, logical block 98308
[17179604.424000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179604.424000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179604.424000] ide: failed opcode was: unknown
[17179604.424000] end_request: I/O error, dev hdd, sector 786440
[17179604.424000] Buffer I/O error on device hdd, logical block 98305
[17179604.472000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179604.472000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179604.472000] ide: failed opcode was: unknown
[17179604.472000] end_request: I/O error, dev hdd, sector 786432
[17179604.472000] Buffer I/O error on device hdd, logical block 98304
[17179604.520000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179604.520000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179604.520000] ide: failed opcode was: unknown
[17179604.520000] end_request: I/O error, dev hdd, sector 786432
[17179604.520000] Buffer I/O error on device hdd, logical block 98304
[17179604.568000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179604.568000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179604.568000] ide: failed opcode was: unknown
[17179604.568000] end_request: I/O error, dev hdd, sector 786432
[17179604.952000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179604.952000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179604.952000] ide: failed opcode was: unknown
[17179604.952000] end_request: I/O error, dev hdd, sector 786432
[17179605.004000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.004000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.004000] ide: failed opcode was: unknown
[17179605.004000] end_request: I/O error, dev hdd, sector 786432
[17179605.028000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.028000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.028000] ide: failed opcode was: unknown
[17179605.028000] end_request: I/O error, dev hdd, sector 786560
[17179605.076000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.076000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.076000] ide: failed opcode was: unknown
[17179605.076000] end_request: I/O error, dev hdd, sector 786560
[17179605.136000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.136000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.136000] ide: failed opcode was: unknown
[17179605.136000] end_request: I/O error, dev hdd, sector 786496
[17179605.184000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.184000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.184000] ide: failed opcode was: unknown
[17179605.184000] end_request: I/O error, dev hdd, sector 786496
[17179605.232000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.232000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.232000] ide: failed opcode was: unknown
[17179605.232000] end_request: I/O error, dev hdd, sector 786496
[17179605.328000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.328000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.328000] ide: failed opcode was: unknown
[17179605.328000] end_request: I/O error, dev hdd, sector 786496
[17179605.412000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.412000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.412000] ide: failed opcode was: unknown
[17179605.412000] end_request: I/O error, dev hdd, sector 786432
[17179605.508000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.508000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.508000] ide: failed opcode was: unknown
[17179605.508000] end_request: I/O error, dev hdd, sector 786432
[17179605.604000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.604000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.604000] ide: failed opcode was: unknown
[17179605.604000] end_request: I/O error, dev hdd, sector 786432
[17179605.652000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.652000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.652000] ide: failed opcode was: unknown
[17179605.652000] end_request: I/O error, dev hdd, sector 786432
[17179605.700000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.700000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.700000] ide: failed opcode was: unknown
[17179605.700000] end_request: I/O error, dev hdd, sector 786432
[17179605.748000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.748000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.748000] ide: failed opcode was: unknown
[17179605.748000] end_request: I/O error, dev hdd, sector 786448
[17179605.796000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.796000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.796000] ide: failed opcode was: unknown
[17179605.796000] end_request: I/O error, dev hdd, sector 786432
[17179605.844000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.844000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.844000] ide: failed opcode was: unknown
[17179605.844000] end_request: I/O error, dev hdd, sector 786432
[17179605.892000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.892000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.892000] ide: failed opcode was: unknown
[17179605.892000] end_request: I/O error, dev hdd, sector 786432
[17179605.940000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.940000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.940000] ide: failed opcode was: unknown
[17179605.940000] end_request: I/O error, dev hdd, sector 786432
[17179605.988000] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[17179605.988000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179605.988000] ide: failed opcode was: unknown
[17179605.988000] end_request: I/O error, dev hdd, sector 786432
[17179606.520000] Bluetooth: Core ver 2.8
[17179606.520000] NET: Registered protocol family 31
[17179606.520000] Bluetooth: HCI device and connection manager initialized
[17179606.520000] Bluetooth: HCI socket layer initialized
[17179606.588000] Bluetooth: L2CAP ver 2.8
[17179606.588000] Bluetooth: L2CAP socket layer initialized
[17179606.592000] Bluetooth: RFCOMM socket layer initialized
[17179606.592000] Bluetooth: RFCOMM TTY layer initialized
[17179606.592000] Bluetooth: RFCOMM ver 1.7
[17181423.276000] usb 1-8: new high speed USB device using ehci_hcd and address 3
[17181423.412000] usb 1-8: configuration #1 chosen from 1 choice
[17181423.500000] usbcore: registered new driver libusual
[17181423.512000] Initializing USB Mass Storage driver...
[17181423.512000] scsi2 : SCSI emulation for USB Mass Storage devices
[17181423.512000] usb-storage: device found at 3
[17181423.512000] usbcore: registered new driver usb-storage
[17181423.512000] usb-storage: waiting for device to settle before scanning
[17181423.512000] USB Mass Storage support registered.
[17181428.512000] usb-storage: device scan complete
[17181428.512000]   Vendor: USB 2.0   Model: Flash Disk        Rev: 2.00
[17181428.512000]   Type:   Direct-Access                      ANSI SCSI revision: 02
[17181428.556000] SCSI device sda: 1023487 512-byte hdwr sectors (524 MB)
[17181428.556000] sda: Write Protect is off
[17181428.556000] sda: Mode Sense: 0b 00 00 08
[17181428.556000] sda: assuming drive cache: write through
[17181428.560000] SCSI device sda: 1023487 512-byte hdwr sectors (524 MB)
[17181428.560000] sda: Write Protect is off
[17181428.560000] sda: Mode Sense: 0b 00 00 08
[17181428.560000] sda: assuming drive cache: write through
[17181428.564000]  sda: sda1
[17181428.564000] sd 2:0:0:0: Attached scsi removable disk sda
[17181428.588000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[17181429.076000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!