[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-11.35-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003bfef000 (usable)
[17179569.184000]  BIOS-e820: 000000003bff0000 - 000000003bffffc0 (ACPI data)
[17179569.184000]  BIOS-e820: 000000003bffffc0 - 000000003c000000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 63MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 245743
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 16367 pages, LIFO batch:3
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 OID_00                                ) @ 0x000e6010
[17179569.184000] ACPI: RSDT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x3bffc3c0
[17179569.184000] ACPI: FADT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x3bfffb10
[17179569.184000] ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x00010200) @ 0x3bfffba0
[17179569.184000] ACPI: DSDT (v001 MTC___ 8650____ 0x00001000 INTL 0x02002036) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:13 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 3c000000:c3f80000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1492.830 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.092000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.092000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.128000] Memory: 964696k/982972k available (1911k kernel code, 17592k reserved, 1073k data, 308k init, 65468k highmem)
[17179570.128000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.208000] Calibrating delay using timer specific routine.. 2989.59 BogoMIPS (lpj=5979186)
[17179570.208000] Security Framework v1.0.0 initialized
[17179570.208000] SELinux:  Disabled at boot.
[17179570.208000] Mount-cache hash table entries: 512
[17179570.208000] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179570.208000] CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179570.208000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179570.208000] CPU: L2 cache: 1024K
[17179570.208000] CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000000 00000000 00000000
[17179570.208000] Checking 'hlt' instruction... OK.
[17179570.224000] SMP alternatives: switching to UP code
[17179570.224000] Freeing SMP alternatives: 16k freed
[17179570.224000] checking if image is initramfs... it is
[17179570.828000] Freeing initrd memory: 5326k freed
[17179570.828000] ACPI: Core revision 20060707
[17179570.828000] ACPI: Looking for DSDT ... not found!
[17179570.840000] CPU0: Intel(R) Celeron(R) M processor         1.50GHz stepping 08
[17179570.840000] Total of 1 processors activated (2989.59 BogoMIPS).
[17179570.840000] ENABLING IO-APIC IRQs
[17179570.840000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.984000] Brought up 1 CPUs
[17179570.984000] migration_cost=0
[17179570.984000] NET: Registered protocol family 16
[17179570.984000] EISA bus registered
[17179570.984000] ACPI: bus type pci registered
[17179570.984000] PCI: PCI BIOS revision 2.10 entry at 0xe9c04, last bus=1
[17179570.984000] PCI: Using configuration type 1
[17179570.984000] Setting up standard PCI resources
[17179570.988000] ACPI: Interpreter enabled
[17179570.988000] ACPI: Using IOAPIC for interrupt routing
[17179570.988000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.988000] PCI: Probing PCI hardware (bus 00)
[17179570.988000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179570.988000] PCI quirk: region 1000-107f claimed by vt8235 PM
[17179570.988000] PCI quirk: region 1400-140f claimed by vt8235 SMB
[17179570.988000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:11.1
[17179570.988000] Boot video device is 0000:01:00.0
[17179570.988000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.004000] ACPI: Embedded Controller [EC0] (gpe 1) interrupt mode.
[17179571.008000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[17179571.008000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
[17179571.008000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[17179571.008000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
[17179571.008000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179571.008000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179571.008000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179571.008000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179571.008000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[17179571.008000] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11
[17179571.008000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
[17179571.008000] ACPI Error (uteval-0269): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dffe4b1c), AE_TYPE
[17179571.008000] ACPI Error (uteval-0275): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20060707]
[17179571.008000] ACPI Exception (pci_link-0281): AE_TYPE, Evaluating _CRS [20060707]
[17179571.008000] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0
[17179571.008000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.008000] pnp: PnP ACPI init
[17179571.012000] pnp: PnP ACPI: found 9 devices
[17179571.012000] PnPBIOS: Disabled by ACPI PNP
[17179571.012000] PCI: Using ACPI for IRQ routing
[17179571.012000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179571.016000] pnp: 00:07: ioport range 0x330-0x331 has been reserved
[17179571.016000] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
[17179571.016000] pnp: 00:07: ioport range 0x1000-0x107f could not be reserved
[17179571.016000] pnp: 00:07: ioport range 0x1400-0x140f has been reserved
[17179571.016000] PCI: Bridge: 0000:00:01.0
[17179571.016000]   IO window: c000-dfff
[17179571.016000]   MEM window: c0000000-cfffffff
[17179571.016000]   PREFETCH window: 90000000-9fffffff
[17179571.016000] PCI: Bus 2, cardbus bridge: 0000:00:09.0
[17179571.016000]   IO window: 00001800-000018ff
[17179571.016000]   IO window: 00001c00-00001cff
[17179571.016000]   PREFETCH window: 40000000-41ffffff
[17179571.016000]   MEM window: 42000000-43ffffff
[17179571.016000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.016000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 169
[17179571.016000] NET: Registered protocol family 2
[17179571.056000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.056000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179571.056000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179571.056000] TCP: Hash tables configured (established 131072 bind 65536)
[17179571.056000] TCP reno registered
[17179571.060000] audit: initializing netlink socket (disabled)
[17179571.060000] audit(1174736432.060:1): initialized
[17179571.060000] highmem bounce pool size: 64 pages
[17179571.060000] VFS: Disk quotas dquot_6.5.1
[17179571.060000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.060000] Initializing Cryptographic API
[17179571.060000] io scheduler noop registered
[17179571.060000] io scheduler anticipatory registered
[17179571.060000] io scheduler deadline registered
[17179571.060000] io scheduler cfq registered (default)
[17179571.060000] isapnp: Scanning for PnP cards...
[17179571.412000] isapnp: No Plug & Play device found
[17179571.448000] Real Time Clock Driver v1.12ac
[17179571.448000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.448000] mice: PS/2 mouse device common for all mice
[17179571.448000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.448000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.448000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.448000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.464000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179571.468000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179571.468000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179571.472000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179571.472000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179571.472000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.476000] EISA: Probing bus 0 at eisa.0
[17179571.476000] Cannot allocate resource for EISA slot 1
[17179571.476000] EISA: Detected 0 cards.
[17179571.476000] TCP bic registered
[17179571.476000] NET: Registered protocol family 1
[17179571.476000] NET: Registered protocol family 8
[17179571.476000] NET: Registered protocol family 20
[17179571.476000] Using IPI No-Shortcut mode
[17179571.476000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.476000] Freeing unused kernel memory: 308k freed
[17179571.504000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.616000] Capability LSM initialized
[17179572.652000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179572.652000] ACPI: Processor [CPU0] (supports 16 throttling states)
[17179573.004000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[17179573.004000] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[17179573.004000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[17179573.004000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[17179573.004000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 177
[17179573.004000] PCI: Via IRQ fixup for 0000:00:11.1, from 0 to 1
[17179573.004000] VP_IDE: chipset revision 6
[17179573.004000] VP_IDE: not 100% native mode: will probe irqs later
[17179573.004000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[17179573.004000]     ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
[17179573.004000]     ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
[17179573.004000] Probing IDE interface ide0...
[17179573.420000] hda: FUJITSU MHV2060AT, ATA DISK drive
[17179574.096000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.172000] Probing IDE interface ide1...
[17179575.040000] hdc: PHILIPS DVD+/-RW SDVD8820, ATAPI CD/DVD-ROM drive
[17179575.716000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.720000] hda: max request size: 128KiB
[17179575.728000] hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[17179575.732000] hda: cache flushes supported
[17179575.732000]  hda: hda1 hda2 < hda5 >
[17179575.820000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.820000] Uniform CD-ROM driver Revision: 3.20
[17179576.044000] usbcore: registered new driver usbfs
[17179576.044000] usbcore: registered new driver hub
[17179576.044000] USB Universal Host Controller Interface driver v3.0
[17179576.044000] ACPI Error (uteval-0269): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dffe4b1c), AE_TYPE
[17179576.044000] ACPI Error (uteval-0275): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20060707]
[17179576.044000] ACPI Exception (pci_link-0281): AE_TYPE, Evaluating _CRS [20060707]
[17179576.044000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[17179576.044000] ACPI: Invalid IRQ link routing entry
[17179576.044000] ACPI: Unable to derive IRQ for device 0000:00:10.0
[17179576.044000] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 11
[17179576.044000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179576.044000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179576.044000] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
[17179576.044000] usb usb1: configuration #1 chosen from 1 choice
[17179576.044000] hub 1-0:1.0: USB hub found
[17179576.044000] hub 1-0:1.0: 2 ports detected
[17179576.148000] ACPI Error (uteval-0269): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dffe4b1c), AE_TYPE
[17179576.148000] ACPI Error (uteval-0275): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20060707]
[17179576.148000] ACPI Exception (pci_link-0281): AE_TYPE, Evaluating _CRS [20060707]
[17179576.148000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[17179576.148000] ACPI: Invalid IRQ link routing entry
[17179576.148000] ACPI: Unable to derive IRQ for device 0000:00:10.1
[17179576.148000] ACPI: PCI Interrupt 0000:00:10.1[B]: no GSI - using IRQ 7
[17179576.148000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179576.148000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179576.148000] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
[17179576.148000] usb usb2: configuration #1 chosen from 1 choice
[17179576.148000] hub 2-0:1.0: USB hub found
[17179576.148000] hub 2-0:1.0: 2 ports detected
[17179576.252000] ACPI Error (uteval-0269): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dffe4b1c), AE_TYPE
[17179576.252000] ACPI Error (uteval-0275): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20060707]
[17179576.252000] ACPI Exception (pci_link-0281): AE_TYPE, Evaluating _CRS [20060707]
[17179576.252000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[17179576.252000] ACPI: Invalid IRQ link routing entry
[17179576.252000] ACPI: Unable to derive IRQ for device 0000:00:10.2
[17179576.252000] ACPI: PCI Interrupt 0000:00:10.2[C]: no GSI - using IRQ 5
[17179576.252000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179576.252000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179576.252000] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
[17179576.252000] usb usb3: configuration #1 chosen from 1 choice
[17179576.252000] hub 3-0:1.0: USB hub found
[17179576.252000] hub 3-0:1.0: 2 ports detected
[17179576.364000] PCI: Enabling device 0000:00:10.3 (0000 -> 0002)
[17179576.364000] ACPI Error (uteval-0269): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dffe4b1c), AE_TYPE
[17179576.364000] ACPI Error (uteval-0275): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20060707]
[17179576.364000] ACPI Exception (pci_link-0281): AE_TYPE, Evaluating _CRS [20060707]
[17179576.364000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[17179576.364000] ACPI: Invalid IRQ link routing entry
[17179576.364000] ACPI: Unable to derive IRQ for device 0000:00:10.3
[17179576.364000] ACPI: PCI Interrupt 0000:00:10.3[D]: no GSI - using IRQ 10
[17179576.364000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[17179576.364000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179576.364000] ehci_hcd 0000:00:10.3: irq 10, io mem 0x44011000
[17179576.364000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.364000] usb usb4: configuration #1 chosen from 1 choice
[17179576.364000] hub 4-0:1.0: USB hub found
[17179576.364000] hub 4-0:1.0: 6 ports detected
[17179576.388000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179576.496000] Attempting manual resume
[17179576.556000] kjournald starting.  Commit interval 5 seconds
[17179576.556000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.404000] usb 1-1: new full speed USB device using uhci_hcd and address 3
[17179581.440000] usb 1-1: configuration #1 chosen from 1 choice
[17179588.104000] ath_hal: module license 'Proprietary' taints kernel.
[17179588.104000] ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[17179588.112000] wlan: 0.8.4.2 (0.9.2.1)
[17179588.128000] ath_rate_sample: 1.2 (0.9.2.1)
[17179588.136000] ath_pci: 0.9.4.5 (0.9.2.1)
[17179588.140000] PCI: Enabling device 0000:00:06.0 (0000 -> 0002)
[17179588.140000] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 185
[17179588.724000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[17179588.724000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[17179588.724000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[17179588.724000] wifi0: mac 7.8 phy 4.5 radio 5.6
[17179588.724000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[17179588.724000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[17179588.724000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[17179588.724000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[17179588.724000] wifi0: Use hw queue 8 for CAB traffic
[17179588.724000] wifi0: Use hw queue 9 for beacons
[17179588.780000] wifi0: Atheros 5212: mem=0x44000000, irq=185
[17179588.964000] irda_init()
[17179588.964000] NET: Registered protocol family 23
[17179589.188000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179589.196000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179589.208000] input: PC Speaker as /class/input/input1
[17179589.260000] Linux agpgart interface v0.101 (c) Dave Jones
[17179589.272000] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[17179589.284000] agpgart: AGP aperture is 128M @ 0xa0000000
[17179589.596000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179589.596000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23
[17179589.596000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23
[17179589.596000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKB] -> GSI 23 (level, low) -> IRQ 193
[17179589.596000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 1
[17179589.600000] eth0: VIA Rhine II at 0x1e200, 00:40:d0:8a:ca:c8, IRQ 193.
[17179589.600000] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
[17179589.788000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
[17179589.832000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 169
[17179589.832000] Yenta: CardBus bridge found at 0000:00:09.0 [1734:10ab]
[17179589.832000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179589.832000] Yenta: Routing CardBus interrupts to PCI
[17179589.832000] Yenta TI: socket 0000:00:09.0, mfunc 0x01001002, devctl 0x44
[17179589.848000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179590.088000] Yenta: ISA IRQ mask 0x0058, PCI irq 169
[17179590.088000] Socket status: 30000006
[17179590.092000] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[17179590.092000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22
[17179590.092000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[17179590.092000] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 201
[17179590.092000] PCI: Via IRQ fixup for 0000:00:11.6, from 5 to 9
[17179590.288000] ts: Compaq touchscreen protocol output
[17179590.360000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179591.364000] NET: Registered protocol family 17
[17179591.596000] PCI: Setting latency timer of device 0000:00:11.6 to 64
[17179591.600000] codec_read: codec 0 is not valid [0x1fc0000]
[17179591.608000] codec_read: codec 0 is not valid [0x1fe0000]
[17179591.612000] codec_ready: codec 0 is not ready [0x13c0000]
[17179591.612000] codec_ready: codec 0 is not ready [0x13c0000]
[17179592.120000] codec_read: codec 0 is not valid [0x1fc0000]
[17179592.128000] codec_read: codec 0 is not valid [0x1fe0000]
[17179592.128000] AC'97 0 access is not valid [0xffffffff], removing mixer.
[17179592.128000] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[17179592.128000] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -5
[17179592.128000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 201
[17179592.128000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 9
[17179592.180000] NET: Registered protocol family 10
[17179592.180000] lo: Disabled Privacy Extensions
[17179592.180000] IPv6 over IPv4 tunneling driver
[17179592.880000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179592.884000] codec_read: codec 0 is not valid [0x1fc0000]
[17179592.892000] codec_read: codec 0 is not valid [0x1fe0000]
[17179592.896000] codec_ready: codec 0 is not ready [0x1000000]
[17179592.896000] codec_ready: codec 0 is not ready [0x1000000]
[17179593.404000] codec_read: codec 0 is not valid [0x1fc0000]
[17179593.412000] codec_read: codec 0 is not valid [0x1fe0000]
[17179593.412000] AC'97 0 access is not valid [0xffffffff], removing mixer.
[17179593.412000] ACPI: PCI interrupt for device 0000:00:11.5 disabled
[17179593.412000] VIA 82xx Audio: probe of 0000:00:11.5 failed with error -5
[17179593.760000] cs: IO port probe 0x100-0x3af: clean.
[17179593.760000] cs: IO port probe 0x3e0-0x4ff: clean.
[17179593.764000] cs: IO port probe 0x820-0x8ff: clean.
[17179593.764000] cs: IO port probe 0xc00-0xcf7: clean.
[17179593.764000] cs: IO port probe 0xa00-0xaff: clean.
[17179602.212000] eth0: no IPv6 routers present
[17179602.564000] ath0: no IPv6 routers present
[17179606.992000] uhci_hcd 0000:00:10.0: Unlink after no-IRQ?  Controller is probably using the wrong IRQ.
[17179614.704000] usbcore: registered new driver snd-usb-audio
[17179615.304000] lp: driver loaded but no devices found
[17179615.328000] Adding 2409708k swap on /dev/disk/by-uuid/7b5e2586-f40f-4f8a-9fd2-127a5c083a07.  Priority:-1 extents:1 across:2409708k
[17179615.408000] EXT3 FS on hda1, internal journal
[17179619.996000] ACPI: AC Adapter [AC] (on-line)
[17179620.064000] ACPI: Battery Slot [BAT0] (battery present)
[17179620.084000] ACPI: Power Button (FF) [PWRF]
[17179620.084000] ACPI: Lid Switch [LID]
[17179620.084000] ACPI: Sleep Button (CM) [SBTN]
[17179620.084000] ACPI: Power Button (CM) [PBTN]
[17179620.200000] ibm_acpi: ec object not found
[17179620.228000] pcc_acpi: loading...
[17179620.344000] ACPI: Video Device [VGA0] (multi-head: yes  rom: no  post: no)
[17179625.752000] apm: BIOS not found.
[17179630.164000] Bluetooth: Core ver 2.8
[17179630.164000] NET: Registered protocol family 31
[17179630.164000] Bluetooth: HCI device and connection manager initialized
[17179630.164000] Bluetooth: HCI socket layer initialized
[17179630.196000] Bluetooth: L2CAP ver 2.8
[17179630.196000] Bluetooth: L2CAP socket layer initialized
[17179630.212000] Bluetooth: RFCOMM socket layer initialized
[17179630.212000] Bluetooth: RFCOMM TTY layer initialized
[17179630.212000] Bluetooth: RFCOMM ver 1.7
[17179645.460000] eth0: no IPv6 routers present