| 2007-03-17 05:29:33 |
Rob |
description |
I installed a Sonnet Technologies Tempo Trio card in a whitebox PC. It is a combo card (ATA133, USB 2.0, FW 400) with a Promise based IDE controller. At boot the kernel does a prob but fails to detect the drives connected. I've checked the power, cables, and drives by connecting them to the motherboard's IDE controllers: they all are checked to be in working order. Diagnostics follow:
===============DMESG===================
[42949372.960000] Linux version 2.6.17-11-server (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:53:33 UTC 2007 (Ubuntu 2.6.17-11.35-server)
[42949372.960000] BIOS-provided physical RAM map:
[42949372.960000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[42949372.960000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[42949372.960000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[42949372.960000] BIOS-e820: 0000000000100000 - 000000000ffc0000 (usable)
[42949372.960000] BIOS-e820: 000000000ffc0000 - 000000000fff8000 (ACPI data)
[42949372.960000] BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
[42949372.960000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[42949372.960000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[42949372.960000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[42949372.960000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[42949372.960000] 0MB HIGHMEM available.
[42949372.960000] 255MB LOWMEM available.
[42949372.960000] On node 0 totalpages: 65472
[42949372.960000] DMA zone: 4096 pages, LIFO batch:0
[42949372.960000] Normal zone: 61376 pages, LIFO batch:15
[42949372.960000] DMI 2.3 present.
[42949372.960000] ACPI: RSDP (v000 AMI ) @ 0x000ff980
[42949372.960000] ACPI: RSDT (v001 D850GB G285010A 0x20011008 MSFT 0x00001011) @ 0x0fff0000
[42949372.960000] ACPI: FADT (v001 D850GB GB85010A 0x20011008 MSFT 0x00001011) @ 0x0fff1000
[42949372.960000] ACPI: DSDT (v001 D850GB GB85010A 0x00000002 MSFT 0x0100000b) @ 0x00000000
[42949372.960000] ACPI: PM-Timer IO Port: 0x408
[42949372.960000] Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
[42949372.960000] Built 1 zonelists
[42949372.960000] Kernel command line: root=/dev/hdc1 ro quiet splash
[42949372.960000] Found and enabled local APIC!
[42949372.960000] mapped APIC to ffffd000 (fee00000)
[42949372.960000] Enabling fast FPU save and restore... done.
[42949372.960000] Enabling unmasked SIMD FPU exception support... done.
[42949372.960000] Initializing CPU#0
[42949372.960000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[42949372.960000] Detected 1495.502 MHz processor.
[42949372.960000] Using pmtmr for high-res timesource
[42949372.960000] Console: colour VGA+ 80x25
[42949373.010000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[42949373.010000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[42949373.020000] Memory: 249960k/261888k available (1904k kernel code, 11460k reserved, 1072k data, 312k init, 0k highmem)
[42949373.020000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[42949373.170000] Calibrating delay using timer specific routine.. 2994.33 BogoMIPS (lpj=14971692)
[42949373.170000] Security Framework v1.0.0 initialized
[42949373.170000] SELinux: Disabled at boot.
[42949373.170000] Mount-cache hash table entries: 512
[42949373.170000] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[42949373.170000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[42949373.170000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[42949373.170000] CPU: L2 cache: 256K
[42949373.170000] CPU: Hyper-Threading is disabled
[42949373.170000] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
[42949373.170000] Checking 'hlt' instruction... OK.
[42949373.210000] SMP alternatives: switching to UP code
[42949373.210000] Freeing SMP alternatives: 16k freed
[42949373.210000] checking if image is initramfs... it is
[42949374.060000] Freeing initrd memory: 5428k freed
[42949374.060000] ACPI: Core revision 20060707
[42949374.060000] ACPI: Looking for DSDT ... not found!
[42949374.060000] ACPI: setting ELCR to 0200 (from 0e60)
[42949374.060000] CPU0: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 07
[42949374.060000] SMP motherboard not detected.
[42949374.170000] Brought up 1 CPUs
[42949374.170000] migration_cost=0
[42949374.170000] NET: Registered protocol family 16
[42949374.170000] EISA bus registered
[42949374.170000] ACPI: bus type pci registered
[42949374.170000] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=3
[42949374.170000] PCI: Using configuration type 1
[42949374.170000] Setting up standard PCI resources
[42949374.170000] ACPI: Interpreter enabled
[42949374.170000] ACPI: Using PIC for interrupt routing
[42949374.170000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[42949374.170000] PCI: Probing PCI hardware (bus 00)
[42949374.180000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[42949374.180000] PCI quirk: region 0500-053f claimed by ICH4 GPIO
[42949374.180000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[42949374.180000] Boot video device is 0000:01:00.0
[42949374.180000] PCI: Transparent bridge - 0000:00:1e.0
[42949374.180000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[42949374.180000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[42949374.180000] ACPI: Power Resource [FDDP] (off)
[42949374.180000] ACPI: Power Resource [URP1] (off)
[42949374.180000] ACPI: Power Resource [URP2] (off)
[42949374.180000] ACPI: Power Resource [LPTP] (off)
[42949374.180000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[42949374.180000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[42949374.180000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[42949374.190000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[42949374.190000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[42949374.190000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[42949374.190000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[42949374.190000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[42949374.190000] Linux Plug and Play Support v0.97 (c) Adam Belay
[42949374.190000] pnp: PnP ACPI init
[42949374.190000] pnp: PnP ACPI: found 9 devices
[42949374.190000] PnPBIOS: Disabled by ACPI PNP
[42949374.190000] PCI: Using ACPI for IRQ routing
[42949374.190000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[42949374.200000] PCI: Bridge: 0000:00:01.0
[42949374.200000] IO window: disabled.
[42949374.200000] MEM window: fc800000-fe8fffff
[42949374.200000] PREFETCH window: e4400000-f44fffff
[42949374.200000] PCI: Bridge: 0000:02:0b.0
[42949374.200000] IO window: c000-cfff
[42949374.200000] MEM window: fe900000-fe9fffff
[42949374.200000] PREFETCH window: f4500000-f45fffff
[42949374.200000] PCI: Bridge: 0000:00:1e.0
[42949374.200000] IO window: c000-dfff
[42949374.200000] MEM window: fe900000-feafffff
[42949374.200000] PREFETCH window: f4500000-f46fffff
[42949374.200000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[42949374.200000] NET: Registered protocol family 2
[42949374.270000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[42949374.270000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[42949374.270000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[42949374.270000] TCP: Hash tables configured (established 8192 bind 4096)
[42949374.270000] TCP reno registered
[42949374.270000] audit: initializing netlink socket (disabled)
[42949374.270000] audit(1174092644.270:1): initialized
[42949374.270000] VFS: Disk quotas dquot_6.5.1
[42949374.270000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[42949374.270000] Initializing Cryptographic API
[42949374.270000] io scheduler noop registered
[42949374.270000] io scheduler anticipatory registered
[42949374.270000] io scheduler deadline registered (default)
[42949374.270000] io scheduler cfq registered
[42949374.270000] isapnp: Scanning for PnP cards...
[42949374.620000] isapnp: No Plug & Play device found
[42949374.690000] Real Time Clock Driver v1.12ac
[42949374.690000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[42949374.700000] mice: PS/2 mouse device common for all mice
[42949374.700000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[42949374.700000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[42949374.700000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[42949374.700000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[42949374.700000] serio: i8042 AUX port at 0x60,0x64 irq 12
[42949374.700000] serio: i8042 KBD port at 0x60,0x64 irq 1
[42949374.700000] EISA: Probing bus 0 at eisa.0
[42949374.700000] EISA: Detected 0 cards.
[42949374.700000] TCP bic registered
[42949374.700000] NET: Registered protocol family 1
[42949374.700000] NET: Registered protocol family 8
[42949374.700000] NET: Registered protocol family 20
[42949374.700000] Using IPI No-Shortcut mode
[42949374.700000] ACPI: (supports S0 S1 S4 S5)
[42949374.700000] Freeing unused kernel memory: 312k freed
[42949374.790000] Capability LSM initialized
[42949374.860000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[42949374.860000] ACPI: Getting cpuindex for acpiid 0x2
[42949375.790000] ICH2: IDE controller at PCI slot 0000:00:1f.1
[42949375.790000] ICH2: chipset revision 4
[42949375.790000] ICH2: not 100% native mode: will probe irqs later
[42949375.790000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[42949375.790000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
[42949375.790000] Probing IDE interface ide0...
[42949376.590000] hda: CREATIVE CD5233E, ATAPI CD/DVD-ROM drive
[42949376.960000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[42949376.960000] Probing IDE interface ide1...
[42949377.270000] hdc: WDC WD200BB-00AUA1, ATA DISK drive
[42949378.000000] ide1 at 0x170-0x177,0x376 on irq 15
[42949378.040000] hda: ATAPI 56X CD-ROM drive, 128kB Cache, DMA
[42949378.040000] Uniform CD-ROM driver Revision: 3.20
[42949378.060000] hdc: max request size: 128KiB
[42949378.060000] hdc: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
[42949378.060000] hdc: cache flushes not supported
[42949378.060000] hdc: hdc1 hdc2 < hdc5 >
[42949378.320000] PDC20269: IDE controller at PCI slot 0000:03:02.0
[42949378.320000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 6
[42949378.320000] PCI: setting IRQ 6 as level-triggered
[42949378.320000] ACPI: PCI Interrupt 0000:03:02.0[A] -> Link [LNKF] -> GSI 6 (level, low) -> IRQ 6
[42949378.320000] PDC20269: chipset revision 2
[42949378.320000] PDC20269: ROM enabled at 0xfe9e0000
[42949378.320000] PDC20269: 100% native mode on irq 6
[42949378.320000] ide2: BM-DMA at 0xcf90-0xcf97, BIOS settings: hde:DMA, hdf:DMA
[42949378.320000] PDC20269: simplex device: DMA disabled
[42949378.320000] ide3: PDC20269 Bus-Master DMA disabled (BIOS)
[42949378.320000] Probing IDE interface ide2...
[42949378.930000] Probing IDE interface ide3...
[42949379.650000] usbcore: registered new driver usbfs
[42949379.650000] usbcore: registered new driver hub
[42949379.660000] USB Universal Host Controller Interface driver v3.0
[42949379.660000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[42949379.660000] PCI: setting IRQ 5 as level-triggered
[42949379.660000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
[42949379.660000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[42949379.660000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[42949379.660000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[42949379.660000] uhci_hcd 0000:00:1f.2: irq 5, io base 0x0000ef40
[42949379.660000] usb usb1: configuration #1 chosen from 1 choice
[42949379.660000] hub 1-0:1.0: USB hub found
[42949379.660000] hub 1-0:1.0: 2 ports detected
[42949379.740000] Probing IDE interface ide2...
[42949379.750000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[42949379.770000] ieee1394: Initialized config rom entry `ip1394'
[42949379.780000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
[42949379.780000] PCI: setting IRQ 9 as level-triggered
[42949379.780000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
[42949379.780000] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[42949379.780000] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[42949379.780000] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[42949379.780000] uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000ef80
[42949379.780000] usb usb2: configuration #1 chosen from 1 choice
[42949379.780000] hub 2-0:1.0: USB hub found
[42949379.780000] hub 2-0:1.0: 2 ports detected
[42949379.900000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
[42949379.900000] ohci_hcd 0000:03:00.0: OHCI Host Controller
[42949379.900000] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[42949379.900000] ohci_hcd 0000:03:00.0: irq 9, io mem 0xfe9dd000
[42949380.480000] usb usb3: configuration #1 chosen from 1 choice
[42949380.480000] hub 3-0:1.0: USB hub found
[42949380.480000] hub 3-0:1.0: 3 ports detected
[42949380.840000] Probing IDE interface ide3...
[42949381.010000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[42949381.010000] PCI: setting IRQ 10 as level-triggered
[42949381.010000] ACPI: PCI Interrupt 0000:03:00.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[42949381.010000] ohci_hcd 0000:03:00.1: OHCI Host Controller
[42949381.010000] ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 4
[42949381.010000] ohci_hcd 0000:03:00.1: irq 10, io mem 0xfe9de000
[42949381.010000] hub 3-0:1.0: over-current change on port 1
[42949381.590000] usb usb4: configuration #1 chosen from 1 choice
[42949381.590000] hub 4-0:1.0: USB hub found
[42949381.590000] hub 4-0:1.0: 2 ports detected
[42949381.590000] hub 3-0:1.0: over-current change on port 2
[42949382.120000] ACPI: PCI Interrupt 0000:03:00.2[C] -> Link [LNKF] -> GSI 6 (level, low) -> IRQ 6
[42949382.120000] ehci_hcd 0000:03:00.2: EHCI Host Controller
[42949382.120000] ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 5
[42949382.150000] ehci_hcd 0000:03:00.2: irq 6, io mem 0xfe9dfc00
[42949382.150000] ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
[42949382.150000] usb usb5: configuration #1 chosen from 1 choice
[42949382.150000] hub 5-0:1.0: USB hub found
[42949382.150000] hub 5-0:1.0: 5 ports detected
[42949382.260000] ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[42949382.320000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[fe9dc000-fe9dc7ff] Max Packet=[1024] IR/IT contexts=[8/8]
[42949382.610000] Attempting manual resume
[42949382.650000] kjournald starting. Commit interval 5 seconds
[42949382.650000] EXT3-fs: mounted filesystem with ordered data mode.
[42949383.660000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0030930100000b0a]
[42949387.210000] input: PC Speaker as /class/input/input0
[42949387.790000] Linux agpgart interface v0.101 (c) Dave Jones
[42949387.800000] agpgart: Detected an Intel i850 Chipset.
[42949387.800000] agpgart: AGP aperture is 64M @ 0xf8000000
[42949388.380000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[42949388.380000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[42949388.460000] hw_random: RNG not detected
[42949388.950000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKF] -> GSI 6 (level, low) -> IRQ 6
[42949388.950000] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
[42949388.950000] 0000:02:09.0: 3Com PCI 3c905C Tornado at d09a0c00.
[42949389.140000] ieee80211_crypt: registered algorithm 'NULL'
[42949389.150000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[42949389.150000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[42949389.240000] bcm43xx driver
[42949389.240000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[42949389.240000] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
[42949389.700000] lp: driver loaded but no devices found
[42949389.720000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKF] -> GSI 6 (level, low) -> IRQ 6
[42949389.720000] eth0: setting full-duplex.
[42949389.780000] SCSI subsystem initialized
[42949389.790000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[42949389.790000] ieee1394: sbp2: Try serialize_io=0 for better performance
[42949390.020000] Adding 746980k swap on /dev/disk/by-uuid/a4c36d95-aa26-4226-a44d-ba2a1da6626b. Priority:-1 extents:1 across:746980k
[42949390.110000] EXT3 FS on hdc1, internal journal
[42949390.390000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[42949390.390000] md: bitmap version 4.39
[42949390.830000] NET: Registered protocol family 17
===================DMESG END====================
===================LSPCI==========================
00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fc800000-fe8fffff
Prefetchable memory behind bridge: e4400000-f44fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=32
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: fe900000-feafffff
Prefetchable memory behind bridge: f4500000-f46fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 04) (prog-if 80 [Master])
Subsystem: Intel Corporation Unknown device 4732
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at ffa0 [size=16]
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 04) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 4732
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at ef40 [size=32]
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 04)
Subsystem: Intel Corporation Unknown device 4732
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at efa0 [size=16]
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 04) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 4732
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 9
Region 4: I/O ports at ef80 [size=32]
01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at fe8f0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
02:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 6
Region 0: I/O ports at dc00 [size=128]
Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at f4600000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:0a.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
Subsystem: Belkin Unknown device 7000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: Memory at feafc000 (32-bit, non-prefetchable) [size=8K]
02:0b.0 PCI bridge: Actiontec Electronics Inc Mini-PCI bridge (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 16 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: f4500000-f45fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [90] #06 [0000]
03:00.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Sonnet Technologies, Inc. Unknown device 0012
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fe9dd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:00.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Sonnet Technologies, Inc. Unknown device 0012
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 16 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at fe9de000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:00.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
Subsystem: Sonnet Technologies, Inc. Unknown device 0021
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 6
Region 0: Memory at fe9dfc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:01.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 04) (prog-if 10 [OHCI])
Subsystem: Sonnet Technologies, Inc. Unknown device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe9dc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
03:02.0 Mass storage controller: Promise Technology, Inc. 20269 (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc. Unknown device ad69
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort+ <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 4500ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 6
Region 0: I/O ports at cff0 [size=8]
Region 1: I/O ports at cfe4 [size=4]
Region 2: I/O ports at cfa8 [size=8]
Region 3: I/O ports at cfe0 [size=4]
Region 4: I/O ports at cf90 [size=16]
Region 5: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fe9e0000 [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
===================LSPCI END====================== |
I installed a Sonnet Technologies Tempo Trio card in a whitebox PC. It is a combo card (ATA133, USB 2.0, FW 400) with a Promise based IDE controller. At boot the kernel does a prob but fails to detect the drives connected. I've checked the power, cables, and drives by connecting them to the motherboard's IDE controllers: they all are checked to be in working order. |
|
