[17179569.184000] Linux version 2.6.17-11-386 (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Thu Feb 1 19:50:13 UTC 2007 (Ubuntu 2.6.17-11.35-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
[17179569.184000]  BIOS-e820: 000000001dff0000 - 000000001dffffc0 (ACPI data)
[17179569.184000]  BIOS-e820: 000000001dffffc0 - 000000001e000000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 479MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 122864
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 118768 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 OID_00                                ) @ 0x000e5010
[17179569.184000] ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x1dfffbc0
[17179569.184000] ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x1dfffac0
[17179569.184000] ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x1dfffb50
[17179569.184000] ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010101) @ 0x1dfffb80
[17179569.184000] ACPI: DSDT (v001 INSYDE    KN266 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: BIOS age (208) fails cutoff (2000), acpi=force is required to enable ACPI
[17179569.184000] ACPI: acpi=force override
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e1f80000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=fc702a14-f097-4238-985e-d9adb1dcdc53 ro acpi=force
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (013c3000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 1858.007 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.160000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.160000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.184000] Memory: 476436k/491456k available (1829k kernel code, 14476k reserved, 1041k data, 288k init, 0k highmem)
[17179572.184000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179572.264000] Calibrating delay using timer specific routine.. 3720.31 BogoMIPS (lpj=7440622)
[17179572.264000] Security Framework v1.0.0 initialized
[17179572.264000] SELinux:  Disabled at boot.
[17179572.264000] Mount-cache hash table entries: 512
[17179572.264000] CPU: After generic identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
[17179572.264000] CPU: After vendor identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
[17179572.264000] Enabling disabled K7/SSE Support.
[17179572.264000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179572.264000] CPU: L2 Cache: 512K (64 bytes/line)
[17179572.264000] CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000
[17179572.264000] CPU: AMD Athlon(tm) XP 2500+ stepping 00
[17179572.264000] Checking 'hlt' instruction... OK.
[17179572.280000] SMP alternatives: switching to UP code
[17179572.280000] Freeing SMP alternatives: 0k freed
[17179572.280000] checking if image is initramfs... it is
[17179572.924000] Freeing initrd memory: 6654k freed
[17179572.924000] ACPI: Core revision 20060707
[17179572.928000] ACPI: Looking for DSDT ... not found!
[17179572.928000] ACPI: setting ELCR to 0200 (from 0e20)
[17179572.940000] NET: Registered protocol family 16
[17179572.940000] EISA bus registered
[17179572.940000] ACPI: bus type pci registered
[17179572.940000] PCI: PCI BIOS revision 2.10 entry at 0xe8a04, last bus=1
[17179572.940000] PCI: Using configuration type 1
[17179572.940000] Setting up standard PCI resources
[17179572.956000] ACPI: Interpreter enabled
[17179572.956000] ACPI: Using PIC for interrupt routing
[17179572.956000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.956000] PCI: Probing PCI hardware (bus 00)
[17179572.956000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179572.956000] PCI quirk: region 1000-107f claimed by vt8235 PM
[17179572.956000] PCI quirk: region 1400-140f claimed by vt8235 SMB
[17179572.956000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:11.1
[17179572.956000] Boot video device is 0000:01:00.0
[17179572.956000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.964000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[17179572.964000] ACPI: Embedded Controller [EC0] (gpe 1) interrupt mode.
[17179572.968000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[17179572.968000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[17179572.968000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[17179572.968000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 14 15)
[17179572.972000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.972000] pnp: PnP ACPI init
[17179572.972000] pnp: PnP ACPI: found 11 devices
[17179572.972000] PnPBIOS: Disabled by ACPI PNP
[17179572.972000] PCI: Using ACPI for IRQ routing
[17179572.972000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179572.972000] PCI: Cannot allocate resource region 0 of device 0000:00:0a.0
[17179572.976000] pnp: 00:05: ioport range 0x1000-0x107f could not be reserved
[17179572.976000] pnp: 00:05: ioport range 0x1400-0x140f has been reserved
[17179572.976000] pnp: 00:05: ioport range 0x1600-0x167f has been reserved
[17179572.976000] pnp: 00:05: ioport range 0x2c8-0x2cf has been reserved
[17179572.976000] pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved
[17179572.976000] PCI: Bridge: 0000:00:01.0
[17179572.976000]   IO window: c000-dfff
[17179572.976000]   MEM window: e0000000-efffffff
[17179572.976000]   PREFETCH window: a0000000-afffffff
[17179572.976000] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[17179572.976000]   IO window: 00001800-000018ff
[17179572.976000]   IO window: 00001c00-00001cff
[17179572.976000]   PREFETCH window: 20000000-21ffffff
[17179572.976000]   MEM window: 22000000-23ffffff
[17179572.976000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179572.976000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[17179572.976000] PCI: setting IRQ 11 as level-triggered
[17179572.976000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179572.976000] NET: Registered protocol family 2
[17179573.012000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179573.012000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[17179573.012000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[17179573.012000] TCP: Hash tables configured (established 16384 bind 8192)
[17179573.012000] TCP reno registered
[17179573.012000] Simple Boot Flag at 0x37 set to 0x1
[17179573.012000] audit: initializing netlink socket (disabled)
[17179573.012000] audit(1176131293.012:1): initialized
[17179573.012000] VFS: Disk quotas dquot_6.5.1
[17179573.012000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.012000] Initializing Cryptographic API
[17179573.012000] io scheduler noop registered
[17179573.012000] io scheduler anticipatory registered
[17179573.012000] io scheduler deadline registered
[17179573.012000] io scheduler cfq registered (default)
[17179573.012000] isapnp: Scanning for PnP cards...
[17179573.368000] isapnp: No Plug & Play device found
[17179573.392000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179573.392000] mice: PS/2 mouse device common for all mice
[17179573.392000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.392000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.392000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.396000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179573.404000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179573.416000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179573.416000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179573.420000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179573.420000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179573.420000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.424000] EISA: Probing bus 0 at eisa.0
[17179573.424000] Cannot allocate resource for EISA slot 1
[17179573.424000] EISA: Detected 0 cards.
[17179573.424000] TCP bic registered
[17179573.424000] NET: Registered protocol family 1
[17179573.424000] NET: Registered protocol family 8
[17179573.424000] NET: Registered protocol family 20
[17179573.424000] Using IPI Shortcut mode
[17179573.424000] ACPI: (supports S0 S3 S4 S5)
[17179573.428000] Freeing unused kernel memory: 288k freed
[17179573.484000] Capability LSM initialized
[17179573.612000] ACPI: read EC, OB not full
[17179573.612000] ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707]
[17179573.612000] ACPI Exception (dswexec-0458): AE_TIME, While resolving operands for [OpcodeName unavailable] [20060707]
[17179573.612000] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0._PPC] (Node ddfdf2e8), AE_TIME
[17179573.612000] ACPI Exception (acpi_processor-0126): AE_TIME, Evaluating _PPC [20060707]
[17179573.612000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[17179573.628000] ACPI: Thermal Zone [THRM] (33 C)
[17179573.732000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.964000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[17179573.964000] ACPI: Unable to derive IRQ for device 0000:00:11.1
[17179573.964000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[17179573.964000] VP_IDE: chipset revision 6
[17179573.964000] VP_IDE: not 100% native mode: will probe irqs later
[17179573.964000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[17179573.964000]     ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
[17179573.964000]     ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
[17179573.964000] Probing IDE interface ide0...
[17179574.380000] hda: HTS541080G9AT00, ATA DISK drive
[17179575.052000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.072000] Probing IDE interface ide1...
[17179575.936000] hdc: PIONEER DVD-RW DVR-K11, ATAPI CD/DVD-ROM drive
[17179576.608000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.616000] hda: max request size: 512KiB
[17179576.628000] hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(33)
[17179576.628000] hda: cache flushes supported
[17179576.628000]  hda: hda1 hda2 hda3
[17179576.692000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
[17179576.692000] Uniform CD-ROM driver Revision: 3.20
[17179577.020000] ieee1394: Initialized config rom entry `ip1394'
[17179577.024000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[17179577.024000] PCI: setting IRQ 5 as level-triggered
[17179577.024000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[17179577.076000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]  MMIO=[f0000000-f00007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[17179577.080000] usbcore: registered new driver usbfs
[17179577.080000] usbcore: registered new driver hub
[17179577.080000] USB Universal Host Controller Interface driver v3.0
[17179577.084000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[17179577.084000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179577.084000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179577.084000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179577.084000] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
[17179577.084000] usb usb1: configuration #1 chosen from 1 choice
[17179577.084000] hub 1-0:1.0: USB hub found
[17179577.084000] hub 1-0:1.0: 2 ports detected
[17179577.188000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[17179577.188000] PCI: setting IRQ 10 as level-triggered
[17179577.188000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[17179577.188000] PCI: Via IRQ fixup for 0000:00:10.1, from 255 to 10
[17179577.188000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179577.188000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179577.188000] uhci_hcd 0000:00:10.1: irq 10, io base 0x00001300
[17179577.188000] usb usb2: configuration #1 chosen from 1 choice
[17179577.188000] hub 2-0:1.0: USB hub found
[17179577.188000] hub 2-0:1.0: 2 ports detected
[17179577.292000] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179577.292000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[17179577.292000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 3
[17179577.292000] ehci_hcd 0000:00:10.3: irq 11, io mem 0xf0008000
[17179577.292000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.292000] usb usb3: configuration #1 chosen from 1 choice
[17179577.292000] hub 3-0:1.0: USB hub found
[17179577.292000] hub 3-0:1.0: 4 ports detected
[17179578.132000] kjournald starting.  Commit interval 5 seconds
[17179578.132000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.348000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f00000b1c5e]
[17179592.384000] Real Time Clock Driver v1.12ac
[17179592.404000] Linux agpgart interface v0.101 (c) Dave Jones
[17179592.420000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179592.428000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179592.444000] agpgart: Detected VIA Apollo Pro266 chipset
[17179592.460000] agpgart: AGP aperture is 128M @ 0xb0000000
[17179592.480000] input: PC Speaker as /class/input/input1
[17179592.824000] irda_init()
[17179592.824000] NET: Registered protocol family 23
[17179593.112000] input: PS/2 Mouse as /class/input/input2
[17179593.144000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[17179593.440000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179593.440000] Yenta: CardBus bridge found at 0000:00:0a.0 [10cf:10e7]
[17179593.440000] Yenta O2: res at 0x94/0xD4: 00/ea
[17179593.440000] Yenta O2: enabling read prefetch/write burst
[17179593.568000] Yenta: ISA IRQ mask 0x0098, PCI irq 11
[17179593.568000] Socket status: 30000821
[17179593.644000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179593.644000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179593.648000] eth0: VIA Rhine II at 0x1e200, 00:c0:9f:25:b4:54, IRQ 11.
[17179593.652000] eth0: MII PHY found at address 1, status 0x7809 advertising 01e1 Link 0000.
[17179593.668000] parport: PnPBIOS parport detected.
[17179593.668000] parport0: PC-style at 0x378, irq 7 [PCSPP]
[17179593.952000] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[17179593.976000] ts: Compaq touchscreen protocol output
[17179594.052000] Floppy drive(s): fd0 is 1.44M
[17179594.088000] FDC 0 is a National Semiconductor PC87306
[17179594.104000] eth0: link down
[17179594.204000] pccard: CardBus card inserted into slot 0
[17179594.644000] rtl_ieee80211_crypt: registered algorithm 'NULL'
[17179594.648000] rtl_ieee80211_crypt: registered algorithm 'TKIP'
[17179594.648000] rtl_ieee80211_crypt: registered algorithm 'WEP'
[17179594.648000] rtl_ieee80211_crypt: registered algorithm 'CCMP'
[17179594.656000] 
[17179594.656000] Linux kernel driver for RTL8180 / RTL8185 based WLAN cards
[17179594.656000] Copyright (c) 2004-2005, Andrea Merello
[17179594.656000] rtl8180: Initializing module
[17179594.656000] rtl8180: Wireless extensions version 20
[17179594.656000] rtl8180: Initializing proc filesystem
[17179594.704000] PCI: Setting latency timer of device 0000:00:11.6 to 64
[17179594.736000] cs: IO port probe 0x100-0x4ff: clean.
[17179594.736000] cs: IO port probe 0xc00-0xcf7: clean.
[17179594.740000] cs: IO port probe 0xa00-0xaff: clean.
[17179595.148000] NET: Registered protocol family 17
[17179595.312000] MC'97 0 converters and GPIO not ready (0x1)
[17179595.312000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[17179595.312000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179595.840000] rtl8180: Configuring chip resources
[17179595.840000] PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
[17179595.840000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179595.840000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[17179595.840000] rtl8180: Memory mapped space @ 0x22000000 
[17179595.840000] rtl8180: MAC controller is a RTL8180
[17179595.840000] rtl8180: This is a CARDBUS NIC
[17179595.840000] rtl8180: Reported EEPROM chip is a 93c56 (2Kbit)
[17179595.848000] rtl8180: Card MAC address is 00:50:fc:d0:31:9b
[17179595.852000] rtl8180: EEPROM version 102
[17179595.856000] rtl8180: RfParam: 5
[17179595.856000] rtl8180: Card reports RF frontend by Philips.
[17179595.856000] rtl8180: OK! Philips SA2400 radio chipset is supported.
[17179595.856000] rtl8180: Analog PHY found
[17179595.856000] rtl8180: Energy threshold: b
[17179595.856000] rtl8180: PAPE from CONFIG2: 6
[17179595.856000] rtl8180: Antenna A is default antenna
[17179595.856000] rtl8180: Antenna diversity is enabled
[17179595.856000] rtl8180: Carrier sense 1
[17179595.856000] rtl8180: 40-bit WEP is NOT supported in hardware
[17179595.856000] rtl8180: 104-bit WEP is NOT supported in hardware
[17179595.856000] rtl8180: IRQ 11
[17179595.860000] rtl8180: Driver probe completed
[17179595.860000] 
[17179595.984000] rtl8180: Setting SW wep key
[17179596.068000] rtl8180: Bringing up iface
[17179596.276000] rtl8180: Card successfully reset
[17179596.708000] lp0: using parport0 (interrupt-driven).
[17179596.792000] SCSI subsystem initialized
[17179596.804000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179596.804000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179596.852000] usbcore: registered new driver usbserial
[17179596.852000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[17179596.856000] usbcore: registered new driver usbserial_generic
[17179596.856000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[17179596.876000] drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDA
[17179596.876000] drivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5
[17179596.876000] usbcore: registered new driver ipaq
[17179597.028000] EXT3 FS on hda1, internal journal
[17179597.256000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179597.256000] md: bitmap version 4.39
[17179597.532000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[17179599.256000] rtl8180: Setting SW wep key
[17179610.684000] Linking with kamerplant
[17179610.704000] Associated successfully
[17179610.704000] Using B rates
[17179628.892000] ACPI: AC Adapter [ADP0] (on-line)
[17179628.932000] ACPI: Battery Slot [BAT0] (battery absent)
[17179628.952000] ACPI: Power Button (FF) [PWRF]
[17179628.952000] ACPI: Lid Switch [LID]
[17179628.952000] ACPI: Power Button (CM) [PBTN]
[17179629.072000] ibm_acpi: ec object not found
[17179629.108000] pcc_acpi: loading...
[17179629.224000] ACPI: Video Device [VGA0] (multi-head: yes  rom: no  post: no)
[17179629.496000] powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
[17179629.496000] Detected 1857.991 MHz processor.
[17179629.520000] powernow: SGTC: 13333
[17179629.520000] powernow: Minimum speed 796 MHz. Maximum speed 1857 MHz.
[17179635.356000] mtrr: no more MTRRs available
[17179637.320000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179637.320000] apm: overridden by ACPI.
[17179637.884000] NET: Registered protocol family 10
[17179637.884000] lo: Disabled Privacy Extensions
[17179637.884000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179637.884000] IPv6 over IPv4 tunneling driver
[17179638.348000] wlan0: duplicate address detected!
[17179659.856000] Bluetooth: Core ver 2.8
[17179659.856000] NET: Registered protocol family 31
[17179659.856000] Bluetooth: HCI device and connection manager initialized
[17179659.856000] Bluetooth: HCI socket layer initialized
[17179659.884000] Bluetooth: L2CAP ver 2.8
[17179659.884000] Bluetooth: L2CAP socket layer initialized
[17179659.944000] Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1
[17179659.976000] Bluetooth: RFCOMM socket layer initialized
[17179659.976000] Bluetooth: RFCOMM TTY layer initialized
[17179659.976000] Bluetooth: RFCOMM ver 1.7