[ 0.000000] Bootdata ok (command line is root=/dev/sda1 ro quiet splash) [ 0.000000] Linux version 2.6.17-10-generic (root@crested) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 15:34:39 UTC 2006 (Ubuntu 2.6.17-10.33-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fffe000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fffe000 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec03000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000f7a10 [ 0.000000] ACPI: XSDT (v001 A M I OEMXSDT 0x09000620 MSFT 0x00000097) @ 0x000000007fff0100 [ 0.000000] ACPI: FADT (v003 A M I OEMFACP 0x09000620 MSFT 0x00000097) @ 0x000000007fff0290 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x09000620 MSFT 0x00000097) @ 0x000000007fff0390 [ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x09000620 MSFT 0x00000097) @ 0x000000007fffe040 [ 0.000000] ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x000000007fff3bf0 [ 0.000000] ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x0000000000000000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 0-80000000 [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000 [ 0.000000] On node 0 totalpages: 515656 [ 0.000000] DMA zone: 2591 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 513065 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16]) [ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32]) [ 0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ c0000000 size 128 MB [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Disabling vsyscall due to use of PM timer [ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PM timer. [ 0.000000] time.c: Detected 1795.574 MHz processor. [ 33.468594] Console: colour VGA+ 80x25 [ 33.469657] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 33.471078] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 33.490000] Memory: 2053752k/2097088k available (2129k kernel code, 42948k reserved, 1424k data, 188k init) [ 33.568050] Calibrating delay using timer specific routine.. 3594.09 BogoMIPS (lpj=7188193) [ 33.568111] Security Framework v1.0.0 initialized [ 33.568117] SELinux: Disabled at boot. [ 33.568142] Mount-cache hash table entries: 256 [ 33.568285] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 33.568289] CPU: L2 Cache: 1024K (64 bytes/line) [ 33.568292] CPU 0/0(2) -> Node 0 -> Core 0 [ 33.568308] SMP alternatives: switching to UP code [ 33.568533] checking if image is initramfs... it is [ 34.064241] Freeing initrd memory: 5554k freed [ 34.067299] ACPI: Core revision 20060707 [ 34.067773] ACPI: Looking for DSDT ... not found! [ 34.111637] Using local APIC timer interrupts. [ 34.167304] result 12469270 [ 34.167306] Detected 12.469 MHz APIC timer. [ 34.168013] SMP alternatives: switching to SMP code [ 34.168124] Booting processor 1/2 APIC 0x1 [ 34.178434] Initializing CPU#1 [ 34.255706] Calibrating delay using timer specific routine.. 3591.28 BogoMIPS (lpj=7182561) [ 34.255713] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 34.255715] CPU: L2 Cache: 1024K (64 bytes/line) [ 34.255718] CPU 1/1(2) -> Node 0 -> Core 1 [ 34.255841] Dual-Core AMD Opteron(tm) Processor 2210 stepping 02 [ 34.259720] CPU 1: Syncing TSC to CPU 0. [ 34.259827] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 525 cycles) [ 34.259834] Brought up 2 CPUs [ 34.259886] testing NMI watchdog ... OK. [ 34.335440] migration_cost=406 [ 34.335764] NET: Registered protocol family 16 [ 34.335791] ACPI: bus type pci registered [ 34.335799] PCI: Using configuration type 1 [ 34.345023] ACPI: Interpreter enabled [ 34.345025] ACPI: Using IOAPIC for interrupt routing [ 34.345341] Error attaching device data [ 34.345347] Error attaching device data [ 34.345354] Error attaching device data [ 34.345360] Error attaching device data [ 34.345528] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 34.345531] PCI: Probing PCI hardware (bus 00) [ 34.349531] PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.1 [ 34.349977] Boot video device is 0000:00:0c.0 [ 34.350709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 34.365111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 34.365253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1.P1P2._PRT] [ 34.370287] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 34.370865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] [ 34.371644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR28._PRT] [ 34.371988] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR32._PRT] [ 34.372329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR3C._PRT] [ 34.373348] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 *9 11 12 14 15) [ 34.373727] ACPI: PCI Interrupt Link [LN01] (IRQs 1 3 4 5 6 7 9 *11 12 14 15) [ 34.374104] ACPI: PCI Interrupt Link [LN02] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.374478] ACPI: PCI Interrupt Link [LN03] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.374854] ACPI: PCI Interrupt Link [LN04] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.375229] ACPI: PCI Interrupt Link [LN05] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.375604] ACPI: PCI Interrupt Link [LN06] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.376001] ACPI: PCI Interrupt Link [LN07] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.376378] ACPI: PCI Interrupt Link [LN08] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.376751] ACPI: PCI Interrupt Link [LN09] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.377125] ACPI: PCI Interrupt Link [LN10] (IRQs 1 3 4 5 6 *7 9 11 12 14 15) [ 34.377497] ACPI: PCI Interrupt Link [LN11] (IRQs 1 3 4 *5 6 7 9 11 12 14 15) [ 34.377872] ACPI: PCI Interrupt Link [LN12] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.378245] ACPI: PCI Interrupt Link [LN13] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.378619] ACPI: PCI Interrupt Link [LN14] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.378996] ACPI: PCI Interrupt Link [LN15] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.379371] ACPI: PCI Interrupt Link [LN16] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.379757] ACPI: PCI Interrupt Link [LN17] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.380133] ACPI: PCI Interrupt Link [LN18] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.380507] ACPI: PCI Interrupt Link [LN19] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.380882] ACPI: PCI Interrupt Link [LN20] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.381256] ACPI: PCI Interrupt Link [LN21] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.381635] ACPI: PCI Interrupt Link [LN22] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.382010] ACPI: PCI Interrupt Link [LN23] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.382386] ACPI: PCI Interrupt Link [LN24] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.382761] ACPI: PCI Interrupt Link [LN25] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.383137] ACPI: PCI Interrupt Link [LN26] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.383512] ACPI: PCI Interrupt Link [LN27] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.383911] ACPI: PCI Interrupt Link [LN28] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.384290] ACPI: PCI Interrupt Link [LN29] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.384665] ACPI: PCI Interrupt Link [LN30] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 34.384971] ACPI: PCI Interrupt Link [LNUS] (IRQs *10) [ 34.385276] ACPI: PCI Interrupt Link [LNSA] (IRQs *11) [ 34.385368] Linux Plug and Play Support v0.97 (c) Adam Belay [ 34.385380] pnp: PnP ACPI init [ 34.392377] pnp: PnP ACPI: found 15 devices [ 34.392452] PCI: Using ACPI for IRQ routing [ 34.392458] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 34.392574] PCI-DMA: Disabling IOMMU. [ 34.393644] pnp: 00:09: ioport range 0x580-0x58f has been reserved [ 34.393648] pnp: 00:09: ioport range 0x590-0x593 has been reserved [ 34.393651] pnp: 00:09: ioport range 0x700-0x703 has been reserved [ 34.393655] pnp: 00:09: ioport range 0xca0-0xcaf has been reserved [ 34.393661] pnp: 00:0c: ioport range 0x600-0x61f has been reserved [ 34.393664] pnp: 00:0c: ioport range 0x520-0x53f has been reserved [ 34.393668] pnp: 00:0c: ioport range 0x540-0x54f could not be reserved [ 34.393672] pnp: 00:0c: ioport range 0x640-0x65f has been reserved [ 34.393870] PCI: Bridge: 0000:01:0d.0 [ 34.393872] IO window: disabled. [ 34.393876] MEM window: disabled. [ 34.393879] PREFETCH window: disabled. [ 34.393883] PCI: Bridge: 0000:00:01.0 [ 34.393886] IO window: a000-bfff [ 34.393890] MEM window: ff400000-ff4fffff [ 34.393893] PREFETCH window: disabled. [ 34.393897] PCI: Bridge: 0000:00:06.0 [ 34.393899] IO window: disabled. [ 34.393902] MEM window: disabled. [ 34.393905] PREFETCH window: disabled. [ 34.393908] PCI: Bridge: 0000:00:07.0 [ 34.393910] IO window: disabled. [ 34.393913] MEM window: ff500000-ff5fffff [ 34.393917] PREFETCH window: cfe00000-cfefffff [ 34.393920] PCI: Bridge: 0000:00:08.0 [ 34.393922] IO window: disabled. [ 34.393925] MEM window: disabled. [ 34.393927] PREFETCH window: disabled. [ 34.393930] PCI: Bridge: 0000:00:09.0 [ 34.393932] IO window: disabled. [ 34.393935] MEM window: disabled. [ 34.393937] PREFETCH window: disabled. [ 34.393940] PCI: Bridge: 0000:00:0a.0 [ 34.393942] IO window: disabled. [ 34.393945] MEM window: disabled. [ 34.393947] PREFETCH window: disabled. [ 34.393950] PCI: Bridge: 0000:00:0b.0 [ 34.393952] IO window: disabled. [ 34.393955] MEM window: disabled. [ 34.393957] PREFETCH window: disabled. [ 34.393990] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 34.393996] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 34.394003] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 34.394010] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 34.394087] NET: Registered protocol family 2 [ 34.431694] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 34.432125] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 34.434328] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 34.434887] TCP: Hash tables configured (established 262144 bind 65536) [ 34.434890] TCP reno registered [ 34.435375] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 34.435762] audit: initializing netlink socket (disabled) [ 34.435775] audit(1009920488.644:1): initialized [ 34.435965] VFS: Disk quotas dquot_6.5.1 [ 34.435985] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 34.436039] Initializing Cryptographic API [ 34.436043] io scheduler noop registered [ 34.436052] io scheduler anticipatory registered [ 34.436062] io scheduler deadline registered [ 34.436084] io scheduler cfq registered (default) [ 34.436299] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 34.436303] pcie_portdrv_probe->Dev[0132:1166] has invalid IRQ. Check vendor BIOS [ 34.436333] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 34.436337] pcie_portdrv_probe->Dev[0132:1166] has invalid IRQ. Check vendor BIOS [ 34.436363] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 34.436367] pcie_portdrv_probe->Dev[0132:1166] has invalid IRQ. Check vendor BIOS [ 34.436393] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 34.436397] pcie_portdrv_probe->Dev[0132:1166] has invalid IRQ. Check vendor BIOS [ 34.459641] Real Time Clock Driver v1.12ac [ 34.459680] Linux agpgart interface v0.101 (c) Dave Jones [ 34.459682] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 34.459821] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 34.459965] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 34.460398] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 34.460935] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 34.461126] mice: PS/2 mouse device common for all mice [ 34.461682] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 34.461798] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 34.461802] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 34.462030] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 34.464317] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 34.464483] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 34.464578] TCP bic registered [ 34.464589] NET: Registered protocol family 1 [ 34.464595] NET: Registered protocol family 8 [ 34.464597] NET: Registered protocol family 20 [ 34.464973] ACPI: (supports S0 S1 S4 S5) [ 34.465029] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 34.465055] Freeing unused kernel memory: 188k freed [ 34.490570] input: AT Translated Set 2 keyboard as /class/input/input0 [ 34.513668] vga16fb: initializing [ 34.513673] vga16fb: mapped to 0xffff8100000a0000 [ 34.726318] Console: switching to colour frame buffer device 80x25 [ 34.726323] fb0: VGA16 VGA frame buffer device [ 34.732548] Capability LSM initialized [ 34.760004] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707] [ 34.760010] ACPI: Getting cpuindex for acpiid 0x3 [ 34.760313] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707] [ 34.760318] ACPI: Getting cpuindex for acpiid 0x4 [ 35.075520] SvrWks HT1000: IDE controller at PCI slot 0000:00:02.1 [ 35.075544] SvrWks HT1000: chipset revision 0 [ 35.075546] SvrWks HT1000: not 100% native mode: will probe irqs later [ 35.075558] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio [ 35.075569] Probing IDE interface ide0... [ 35.684134] SCSI subsystem initialized [ 35.687937] libata version 1.20 loaded. [ 35.688816] sata_svw 0000:01:0e.0: version 1.07 [ 35.688833] ACPI: PCI Interrupt 0000:01:0e.0[A] -> GSI 11 (level, low) -> IRQ 11 [ 35.688894] ata1: SATA max UDMA/133 cmd 0xFFFFC2000003C000 ctl 0xFFFFC2000003C020 bmdma 0xFFFFC2000003C030 irq 11 [ 35.688915] ata2: SATA max UDMA/133 cmd 0xFFFFC2000003C100 ctl 0xFFFFC2000003C120 bmdma 0xFFFFC2000003C130 irq 11 [ 35.688937] ata3: SATA max UDMA/133 cmd 0xFFFFC2000003C200 ctl 0xFFFFC2000003C220 bmdma 0xFFFFC2000003C230 irq 11 [ 35.688958] ata4: SATA max UDMA/133 cmd 0xFFFFC2000003C300 ctl 0xFFFFC2000003C320 bmdma 0xFFFFC2000003C330 irq 11 [ 35.894887] ata1: SATA link up 1.5 Gbps (SStatus 113) [ 35.907046] ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4063 85:7469 86:3c41 87:4063 88:207f [ 35.907052] ata1: dev 0 ATA-7, max UDMA/133, 321672960 sectors: LBA48 [ 35.919039] ata1: dev 0 configured for UDMA/133 [ 35.919044] scsi0 : sata_svw [ 36.126765] ata2: SATA link down (SStatus 4) [ 36.126768] scsi1 : sata_svw [ 36.334658] ata3: SATA link down (SStatus 4) [ 36.334661] scsi2 : sata_svw [ 36.542552] ata4: SATA link down (SStatus 4) [ 36.542555] scsi3 : sata_svw [ 36.542743] Vendor: ATA Model: WDC WD1600YS-01S Rev: 20.0 [ 36.542751] Type: Direct-Access ANSI SCSI revision: 05 [ 36.542997] ACPI: PCI Interrupt 0000:01:0e.1[A] -> GSI 11 (level, low) -> IRQ 11 [ 36.549303] SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) [ 36.549315] sda: Write Protect is off [ 36.549317] sda: Mode Sense: 00 3a 00 00 [ 36.549331] SCSI device sda: drive cache: write back [ 36.549376] SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) [ 36.549384] sda: Write Protect is off [ 36.549387] sda: Mode Sense: 00 3a 00 00 [ 36.549399] SCSI device sda: drive cache: write back [ 36.549405] sda: sda1 sda2 < sda5 > [ 36.588539] sd 0:0:0:0: Attached scsi disk sda [ 36.794434] Probing IDE interface ide0... [ 36.842520] usbcore: registered new driver usbfs [ 36.842545] usbcore: registered new driver hub [ 36.848177] ACPI: PCI Interrupt 0000:00:03.2[A] -> GSI 10 (level, low) -> IRQ 10 [ 36.848195] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 36.848423] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 [ 36.850215] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 36.874393] ehci_hcd 0000:00:03.2: irq 10, io mem 0xff6ea000 [ 36.874404] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 36.957014] usb usb1: configuration #1 chosen from 1 choice [ 36.957135] hub 1-0:1.0: USB hub found [ 36.957143] hub 1-0:1.0: 4 ports detected [ 37.062441] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10 [ 37.062456] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 37.062579] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 37.582031] ohci_hcd 0000:00:03.0: irq 10, io mem 0xff6e8000 [ 37.642164] usb usb2: configuration #1 chosen from 1 choice [ 37.642283] hub 2-0:1.0: USB hub found [ 37.642292] hub 2-0:1.0: 2 ports detected [ 37.750174] ACPI: PCI Interrupt 0000:00:03.1[A] -> GSI 10 (level, low) -> IRQ 10 [ 37.750184] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 37.750307] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 38.253740] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 38.269688] ohci_hcd 0000:00:03.1: irq 10, io mem 0xff6e9000 [ 38.329852] usb usb3: configuration #1 chosen from 1 choice [ 38.329986] hub 3-0:1.0: USB hub found [ 38.329998] hub 3-0:1.0: 2 ports detected [ 38.425598] Probing IDE interface ide1... [ 38.454818] usb 1-2: configuration #1 chosen from 1 choice [ 38.461041] usbcore: registered new driver libusual [ 38.464510] Initializing USB Mass Storage driver... [ 38.464636] scsi4 : SCSI emulation for USB Mass Storage devices [ 38.464701] usb-storage: device found at 2 [ 38.464705] usbcore: registered new driver usb-storage [ 38.464709] usb-storage: waiting for device to settle before scanning [ 38.464712] USB Mass Storage support registered. [ 39.003309] Attempting manual resume [ 39.039005] kjournald starting. Commit interval 5 seconds [ 39.039013] EXT3-fs: mounted filesystem with ordered data mode. [ 42.446359] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 42.449678] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 42.457329] input: PC Speaker as /class/input/input1 [ 42.559246] Floppy drive(s): fd0 is 1.44M [ 42.583125] FDC 0 is a National Semiconductor PC87306 [ 42.593071] e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI [ 42.593075] e100: Copyright(c) 1999-2005 Intel Corporation [ 42.593132] GSI 16 sharing vector 0xA9 and IRQ 16 [ 42.593136] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 42.670677] e100: eth0: e100_probe: addr 0xff6e7000, irq 169, MAC addr 00:E0:81:47:16:05 [ 42.678846] piix4_smbus 0000:00:02.0: Found 0000:00:02.0 device [ 42.678857] piix4_smbus 0000:00:02.0: Unusual config register value [ 42.678859] piix4_smbus 0000:00:02.0: Try using fix_hstcfg=1 if you experience problems [ 42.678862] piix4_smbus 0000:00:02.0: Illegal Interrupt configuration (or code out of date)! [ 43.051975] tg3.c:v3.59.1 (August 25, 2006) [ 43.051996] GSI 17 sharing vector 0xB1 and IRQ 17 [ 43.051999] ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 26 (level, low) -> IRQ 177 [ 43.069376] eth1: Tigon3 [partno(BCM95780) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:47:16:28 [ 43.069384] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [ 43.069387] eth1: dma_rwctrl[76144000] dma_mask[40-bit] [ 43.069418] GSI 18 sharing vector 0xB9 and IRQ 18 [ 43.069422] ACPI: PCI Interrupt 0000:04:04.1[B] -> GSI 27 (level, low) -> IRQ 185 [ 43.085397] eth2: Tigon3 [partno(BCM95780) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:47:16:29 [ 43.085406] eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [ 43.085409] eth2: dma_rwctrl[76144000] dma_mask[40-bit] [ 43.132999] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 43.415260] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 43.463317] usb-storage: device scan complete [ 43.466423] Vendor: TOSHIBA Model: DVD-ROM SD-M1712 Rev: 1004 [ 43.466432] Type: CD-ROM ANSI SCSI revision: 00 [ 43.466511] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 [ 43.467847] 4:0:0:0: Attached scsi generic sg1 type 5 [ 43.492740] ts: Compaq touchscreen protocol output [ 43.575246] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 43.575251] Uniform CD-ROM driver Revision: 3.20 [ 43.576470] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 43.618873] lp: driver loaded but no devices found [ 43.837472] Adding 6032368k swap on /dev/disk/by-uuid/e1e668f7-571f-4826-b78d-e876b4ceae7d. Priority:-1 extents:1 across:6032368k [ 43.930665] EXT3 FS on sda1, internal journal [ 44.507611] NET: Registered protocol family 17