[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-18-generic (buildd@king) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 19:28:38 UTC 2008 (Ubuntu 2.6.24-18.32-generic) [ 0.000000] Command line: root=UUID=46c8a23f-1834-4f2b-a2a8-d51fbc6051eb ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afe0ac00 (usable) [ 0.000000] BIOS-e820: 00000000afe0ac00 - 00000000afe0cc00 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afe0ec00 - 00000000afe5cc00 (reserved) [ 0.000000] BIOS-e820: 00000000afe5cc00 - 00000000afe5ec00 (ACPI data) [ 0.000000] BIOS-e820: 00000000afe5ec00 - 00000000b0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fe000000 - 00000000ff000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000150000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 720394) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1376256) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1376256 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FEBF0 checksum 0 [ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 000FCE54, 006C (r1 DELL B8K D ASL 61) [ 0.000000] ACPI: FACP 000FCF7C, 00F4 (r3 DELL B8K D ASL 61) [ 0.000000] ACPI: DSDT FFF5E936, 3D2F (r1 DELL dt_ex 1000 INTL 20050624) [ 0.000000] ACPI: FACS AFE0AC00, 0040 [ 0.000000] ACPI: SSDT FFF62786, 00AC (r1 DELL st_ex 1000 INTL 20050624) [ 0.000000] ACPI: APIC 000FD070, 009E (r1 DELL B8K D ASL 61) [ 0.000000] ACPI: BOOT 000FD10E, 0028 (r1 DELL B8K D ASL 61) [ 0.000000] ACPI: ASF! 000FD136, 0067 (r16 DELL B8K D ASL 61) [ 0.000000] ACPI: MCFG 000FD19D, 003E (r1 DELL B8K D ASL 61) [ 0.000000] ACPI: HPET 000FD1DB, 0038 (r1 DELL B8K D ASL 61) [ 0.000000] ACPI: TCPA 000FD437, 0032 (r1 DELL B8K D ASL 61) [ 0.000000] ACPI: SLIC 000FD213, 0176 (r1 DELL B8K D ASL 61) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000150000000 [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 720394) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1376256) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000150000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1376256 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 158 [ 0.000000] 0: 256 -> 720394 [ 0.000000] 0: 1048576 -> 1376256 [ 0.000000] On node 0 totalpages: 1047976 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1224 pages reserved [ 0.000000] DMA zone: 2718 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 702018 pages, LIFO batch:31 [ 0.000000] Normal zone: 4480 pages used for memmap [ 0.000000] Normal zone: 323200 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) [ 0.000000] Processor #6 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) [ 0.000000] Processor #7 [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000afe0a000 - 00000000afe0b000 [ 0.000000] swsusp: Registered nosave memory region: 00000000afe0b000 - 00000000afe0c000 [ 0.000000] swsusp: Registered nosave memory region: 00000000afe0c000 - 00000000afe0f000 [ 0.000000] swsusp: Registered nosave memory region: 00000000afe0f000 - 00000000afe5c000 [ 0.000000] swsusp: Registered nosave memory region: 00000000afe5c000 - 00000000afe5d000 [ 0.000000] swsusp: Registered nosave memory region: 00000000afe5d000 - 00000000afe5e000 [ 0.000000] swsusp: Registered nosave memory region: 00000000afe5e000 - 00000000afe5f000 [ 0.000000] swsusp: Registered nosave memory region: 00000000afe5f000 - 00000000b0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000b0000000 - 00000000e0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fe000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fe000000 - 00000000ff000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ff000000 - 00000000ffb00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ffb00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at b4000000 (gap: b0000000:30000000) [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027936 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=46c8a23f-1834-4f2b-a2a8-d51fbc6051eb ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 51.517070] time.c: Detected 2659.999 MHz processor. [ 51.518541] Console: colour VGA+ 80x25 [ 51.518544] console [tty0] enabled [ 51.518560] Checking aperture... [ 51.518567] Calgary: detecting Calgary via BIOS EBDA area [ 51.518569] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 51.518570] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 51.549320] Placing software IO TLB between 0x1077000 - 0x5077000 [ 51.581081] Memory: 4037764k/5505024k available (2488k kernel code, 154140k reserved, 1319k data, 320k init) [ 51.581111] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1 [ 51.658704] Calibrating delay using timer specific routine.. 5323.68 BogoMIPS (lpj=10647376) [ 51.658731] Security Framework initialized [ 51.658738] SELinux: Disabled at boot. [ 51.658748] AppArmor: AppArmor initialized [ 51.658751] Failure registering capabilities with primary security module. [ 51.659048] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 51.661171] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 51.662162] Mount-cache hash table entries: 256 [ 51.662280] Initializing cgroup subsys ns [ 51.662284] Initializing cgroup subsys cpuacct [ 51.662298] CPU: L1 I cache: 32K, L1 D cache: 32K [ 51.662300] CPU: L2 cache: 4096K [ 51.662302] CPU 0/0 -> Node 0 [ 51.662303] using mwait in idle threads. [ 51.662304] CPU: Physical Processor ID: 0 [ 51.662305] CPU: Processor Core ID: 0 [ 51.662310] CPU0: Thermal monitoring enabled (TM2) [ 51.662321] SMP alternatives: switching to UP code [ 51.663010] Early unpacking initramfs... done [ 51.921196] ACPI: Core revision 20070126 [ 51.943134] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 52.023921] Using local APIC timer interrupts. [ 52.061424] APIC timer calibration result 20781237 [ 52.061425] Detected 20.781 MHz APIC timer. [ 52.061494] SMP alternatives: switching to SMP code [ 52.062090] Booting processor 1/4 APIC 0x6 [ 52.072390] Initializing CPU#1 [ 52.149209] Calibrating delay using timer specific routine.. 5320.07 BogoMIPS (lpj=10640144) [ 52.149215] CPU: L1 I cache: 32K, L1 D cache: 32K [ 52.149216] CPU: L2 cache: 4096K [ 52.149218] CPU 1/6 -> Node 0 [ 52.149219] CPU: Physical Processor ID: 3 [ 52.149220] CPU: Processor Core ID: 0 [ 52.149225] CPU1: Thermal monitoring enabled (TM2) [ 52.149629] Intel(R) Xeon(R) CPU 5150 @ 2.66GHz stepping 06 [ 52.149680] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 52.169690] SMP alternatives: switching to SMP code [ 52.170035] Booting processor 2/4 APIC 0x1 [ 52.180345] Initializing CPU#2 [ 52.256938] Calibrating delay using timer specific routine.. 5320.04 BogoMIPS (lpj=10640086) [ 52.256944] CPU: L1 I cache: 32K, L1 D cache: 32K [ 52.256945] CPU: L2 cache: 4096K [ 52.256947] CPU 2/1 -> Node 0 [ 52.256948] CPU: Physical Processor ID: 0 [ 52.256949] CPU: Processor Core ID: 1 [ 52.256954] CPU2: Thermal monitoring enabled (TM2) [ 52.257357] Intel(R) Xeon(R) CPU 5150 @ 2.66GHz stepping 06 [ 52.257426] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 52.277461] SMP alternatives: switching to SMP code [ 52.278071] Booting processor 3/4 APIC 0x7 [ 52.288372] Initializing CPU#3 [ 52.368656] Calibrating delay using timer specific routine.. 5320.04 BogoMIPS (lpj=10640098) [ 52.368663] CPU: L1 I cache: 32K, L1 D cache: 32K [ 52.368664] CPU: L2 cache: 4096K [ 52.368666] CPU 3/7 -> Node 0 [ 52.368667] CPU: Physical Processor ID: 3 [ 52.368667] CPU: Processor Core ID: 1 [ 52.368673] CPU3: Thermal monitoring enabled (TM2) [ 52.369077] Intel(R) Xeon(R) CPU 5150 @ 2.66GHz stepping 06 [ 52.369157] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 52.389121] Brought up 4 CPUs [ 52.389199] CPU0 attaching sched-domain: [ 52.389201] domain 0: span 05 [ 52.389202] groups: 01 04 [ 52.389204] domain 1: span 0f [ 52.389205] groups: 05 0a [ 52.389207] domain 2: span 0f [ 52.389208] groups: 0f [ 52.389209] CPU1 attaching sched-domain: [ 52.389211] domain 0: span 0a [ 52.389212] groups: 02 08 [ 52.389213] domain 1: span 0f [ 52.389214] groups: 0a 05 [ 52.389216] domain 2: span 0f [ 52.389217] groups: 0f [ 52.389218] CPU2 attaching sched-domain: [ 52.389219] domain 0: span 05 [ 52.389220] groups: 04 01 [ 52.389221] domain 1: span 0f [ 52.389222] groups: 05 0a [ 52.389224] domain 2: span 0f [ 52.389225] groups: 0f [ 52.389226] CPU3 attaching sched-domain: [ 52.389227] domain 0: span 0a [ 52.389228] groups: 08 02 [ 52.389230] domain 1: span 0f [ 52.389231] groups: 0a 05 [ 52.389232] domain 2: span 0f [ 52.389233] groups: 0f [ 52.389484] net_namespace: 120 bytes [ 52.389764] Time: 13:36:39 Date: 06/06/08 [ 52.389788] NET: Registered protocol family 16 [ 52.389932] ACPI: bus type pci registered [ 52.389993] PCI: Using configuration type 1 [ 52.395798] ACPI: EC: Look up EC in DSDT [ 52.424867] ACPI: BIOS _OSI(Linux) query ignored [ 52.424869] ACPI: DMI System Vendor: Dell Inc. [ 52.424870] ACPI: DMI Product Name: Precision WorkStation 690 [ 52.424871] ACPI: DMI Product Version: [ 52.424872] ACPI: DMI Board Name: 0MY171 [ 52.424873] ACPI: DMI BIOS Vendor: Dell Inc. [ 52.424874] ACPI: DMI BIOS Date: 04/04/2007 [ 52.424874] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org [ 52.424876] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org [ 52.435153] ACPI: Interpreter enabled [ 52.435155] ACPI: (supports S0 S1 S3 S4 S5) [ 52.435166] ACPI: Using IOAPIC for interrupt routing [ 52.522367] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 52.524346] PCI: Transparent bridge - 0000:00:1e.0 [ 52.524377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 52.525093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 52.525318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI3._PRT] [ 52.525587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI3.PCIF._PRT] [ 52.525809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI3.PCIG._PRT] [ 52.526030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI5._PRT] [ 52.526328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT] [ 52.526547] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7._PRT] [ 52.526770] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI8._PRT] [ 52.526955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI9._PRT] [ 53.768064] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 53.768368] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 53.768671] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 53.768971] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 53.769279] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 53.769580] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 53.769881] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 53.770187] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 53.770425] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 90 [20070126] [ 53.770430] Linux Plug and Play Support v0.97 (c) Adam Belay [ 53.770452] pnp: PnP ACPI init [ 53.770457] ACPI: bus type pnp registered [ 53.797633] pnp: PnP ACPI: found 10 devices [ 53.797635] ACPI: ACPI bus type pnp unregistered [ 53.797794] PCI: Using ACPI for IRQ routing [ 53.797796] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 53.813169] NET: Registered protocol family 8 [ 53.813171] NET: Registered protocol family 20 [ 53.813204] PCI-GART: No AMD northbridge found. [ 53.813208] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 53.813211] hpet0: 3 64-bit timers, 14318180 Hz [ 53.814238] AppArmor: AppArmor Filesystem Enabled [ 53.817162] Time: tsc clocksource has been installed. [ 53.817169] Switched to high resolution mode on CPU 0 [ 53.817685] Switched to high resolution mode on CPU 2 [ 53.818445] Switched to high resolution mode on CPU 3 [ 53.818996] Switched to high resolution mode on CPU 1 [ 53.825088] system 00:01: ioport range 0x800-0x85f has been reserved [ 53.825091] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 53.825093] system 00:01: ioport range 0x860-0x8ff has been reserved [ 53.825433] PCI: Bridge: 0000:02:00.0 [ 53.825434] IO window: disabled. [ 53.825437] MEM window: disabled. [ 53.825440] PREFETCH window: disabled. [ 53.825443] PCI: Bridge: 0000:02:01.0 [ 53.825444] IO window: disabled. [ 53.825448] MEM window: disabled. [ 53.825450] PREFETCH window: disabled. [ 53.825453] PCI: Bridge: 0000:01:00.0 [ 53.825454] IO window: disabled. [ 53.825457] MEM window: disabled. [ 53.825460] PREFETCH window: disabled. [ 53.825463] PCI: Bridge: 0000:01:00.3 [ 53.825464] IO window: d000-dfff [ 53.825468] MEM window: dd000000-ddffffff [ 53.825470] PREFETCH window: disabled. [ 53.825473] PCI: Bridge: 0000:00:02.0 [ 53.825474] IO window: d000-dfff [ 53.825477] MEM window: dd000000-deffffff [ 53.825478] PREFETCH window: disabled. [ 53.825481] PCI: Bridge: 0000:00:03.0 [ 53.825482] IO window: disabled. [ 53.825484] MEM window: dcf00000-dcffffff [ 53.825486] PREFETCH window: disabled. [ 53.825488] PCI: Bridge: 0000:08:00.0 [ 53.825489] IO window: disabled. [ 53.825492] MEM window: d9000000-dbffffff [ 53.825495] PREFETCH window: b0000000-bfffffff [ 53.825498] PCI: Bridge: 0000:08:01.0 [ 53.825499] IO window: disabled. [ 53.825503] MEM window: d6000000-d8ffffff [ 53.825505] PREFETCH window: c0000000-cfffffff [ 53.825508] PCI: Bridge: 0000:07:00.0 [ 53.825509] IO window: disabled. [ 53.825512] MEM window: d6000000-dbffffff [ 53.825515] PREFETCH window: b0000000-cfffffff [ 53.825518] PCI: Bridge: 0000:00:04.0 [ 53.825518] IO window: disabled. [ 53.825521] MEM window: d6000000-dcefffff [ 53.825523] PREFETCH window: b0000000-cfffffff [ 53.825525] PCI: Bridge: 0000:00:05.0 [ 53.825526] IO window: disabled. [ 53.825528] MEM window: d5f00000-d5ffffff [ 53.825530] PREFETCH window: disabled. [ 53.825532] PCI: Bridge: 0000:00:06.0 [ 53.825533] IO window: disabled. [ 53.825535] MEM window: d5e00000-d5efffff [ 53.825537] PREFETCH window: disabled. [ 53.825539] PCI: Bridge: 0000:00:07.0 [ 53.825540] IO window: disabled. [ 53.825543] MEM window: d5d00000-d5dfffff [ 53.825544] PREFETCH window: disabled. [ 53.825547] PCI: Bridge: 0000:00:1c.0 [ 53.825548] IO window: disabled. [ 53.825551] MEM window: d5000000-d5cfffff [ 53.825553] PREFETCH window: disabled. [ 53.825556] PCI: Bridge: 0000:00:1e.0 [ 53.825557] IO window: disabled. [ 53.825560] MEM window: d4000000-d4ffffff [ 53.825563] PREFETCH window: disabled. [ 53.825575] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 53.825579] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 53.825589] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 53.825592] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 53.825604] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 53.825607] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 53.825618] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 53.825622] PCI: Setting latency timer of device 0000:02:01.0 to 64 [ 53.825632] PCI: Setting latency timer of device 0000:01:00.3 to 64 [ 53.825638] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 53.825641] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 53.825647] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 53.825649] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 53.825658] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 53.825667] PCI: Setting latency timer of device 0000:08:00.0 to 64 [ 53.825676] PCI: Setting latency timer of device 0000:08:01.0 to 64 [ 53.825682] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 53.825684] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 53.825690] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 53.825693] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 53.825698] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 53.825701] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 53.825714] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 53.825717] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 53.825724] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 53.825731] NET: Registered protocol family 2 [ 53.861098] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 53.862049] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 53.865759] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 53.866248] TCP: Hash tables configured (established 524288 bind 65536) [ 53.866250] TCP reno registered [ 53.881096] checking if image is initramfs... it is [ 54.389574] Freeing initrd memory: 7516k freed [ 54.392182] Simple Boot Flag at 0x7a set to 0x1 [ 54.393668] audit: initializing netlink socket (disabled) [ 54.393684] audit(1212759400.804:1): initialized [ 54.396341] VFS: Disk quotas dquot_6.5.1 [ 54.396412] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 54.396534] io scheduler noop registered [ 54.396536] io scheduler anticipatory registered [ 54.396537] io scheduler deadline registered [ 54.396669] io scheduler cfq registered (default) [ 54.398461] Boot video device is 0000:09:00.0 [ 54.398671] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 54.398698] assign_interrupt_mode Found MSI capability [ 54.398723] Allocate Port Service[0000:00:02.0:pcie00] [ 54.398807] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 54.398844] assign_interrupt_mode Found MSI capability [ 54.398861] Allocate Port Service[0000:00:03.0:pcie00] [ 54.398946] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 54.398972] assign_interrupt_mode Found MSI capability [ 54.398992] Allocate Port Service[0000:00:04.0:pcie00] [ 54.399067] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 54.399093] assign_interrupt_mode Found MSI capability [ 54.399113] Allocate Port Service[0000:00:05.0:pcie00] [ 54.399195] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 54.399216] assign_interrupt_mode Found MSI capability [ 54.399233] Allocate Port Service[0000:00:06.0:pcie00] [ 54.399323] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 54.399348] assign_interrupt_mode Found MSI capability [ 54.399369] Allocate Port Service[0000:00:07.0:pcie00] [ 54.399443] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 54.399478] assign_interrupt_mode Found MSI capability [ 54.399506] Allocate Port Service[0000:00:1c.0:pcie00] [ 54.399593] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 54.399622] Allocate Port Service[0000:01:00.0:pcie10] [ 54.399729] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 54.399763] assign_interrupt_mode Found MSI capability [ 54.399793] Allocate Port Service[0000:02:00.0:pcie20] [ 54.399873] PCI: Setting latency timer of device 0000:02:01.0 to 64 [ 54.399907] assign_interrupt_mode Found MSI capability [ 54.399946] Allocate Port Service[0000:02:01.0:pcie20] [ 54.400035] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 54.400066] Allocate Port Service[0000:07:00.0:pcie10] [ 54.400154] PCI: Setting latency timer of device 0000:08:00.0 to 64 [ 54.400185] Allocate Port Service[0000:08:00.0:pcie20] [ 54.400276] PCI: Setting latency timer of device 0000:08:01.0 to 64 [ 54.400304] Allocate Port Service[0000:08:01.0:pcie20] [ 54.429405] Real Time Clock Driver v1.12ac [ 54.429632] hpet_resources: 0xfed00000 is busy [ 54.429644] Linux agpgart interface v0.102 [ 54.429646] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 54.429774] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 54.429907] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 54.430394] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 54.430594] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 54.431532] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 54.431615] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 54.431930] PNP: No PS/2 controller found. Probing ports directly. [ 54.434428] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 54.434432] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 54.448306] mice: PS/2 mouse device common for all mice [ 54.448344] cpuidle: using governor ladder [ 54.448346] cpuidle: using governor menu [ 54.448470] NET: Registered protocol family 1 [ 54.448562] registered taskstats version 1 [ 54.448685] Magic number: 12:408:634 [ 54.448698] hash matches device ptycd [ 54.448725] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 54.448727] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 54.448728] EDD information not available. [ 54.448734] Freeing unused kernel memory: 320k freed [ 55.594736] fuse init (API version 7.9) [ 55.607283] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 55.607295] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 55.607304] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 55.607313] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 55.735953] SCSI subsystem initialized [ 55.743296] Fusion MPT base driver 3.04.06 [ 55.743298] Copyright (c) 1999-2007 LSI Corporation [ 55.750609] Fusion MPT SAS Host driver 3.04.06 [ 55.750668] ACPI: PCI Interrupt 0000:05:0b.0[A] -> GSI 24 (level, low) -> IRQ 24 [ 55.750679] mptbase: ioc0: Initiating bringup [ 55.764788] usbcore: registered new interface driver usbfs [ 55.764805] usbcore: registered new interface driver hub [ 55.764862] usbcore: registered new device driver usb [ 55.767086] USB Universal Host Controller Interface driver v3.0 [ 55.767140] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 55.767150] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 55.767152] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 55.767398] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 55.767422] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80 [ 55.767520] usb usb1: configuration #1 chosen from 1 choice [ 55.767537] hub 1-0:1.0: USB hub found [ 55.767542] hub 1-0:1.0: 2 ports detected [ 55.771710] libata version 3.00 loaded. [ 55.868644] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 [ 55.868655] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 55.868658] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 55.868675] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 55.868698] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60 [ 55.868776] usb usb2: configuration #1 chosen from 1 choice [ 55.868791] hub 2-0:1.0: USB hub found [ 55.868796] hub 2-0:1.0: 2 ports detected [ 55.972424] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 55.972434] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 55.972438] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 55.972461] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 55.972494] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 55.972571] usb usb3: configuration #1 chosen from 1 choice [ 55.972586] hub 3-0:1.0: USB hub found [ 55.972590] hub 3-0:1.0: 2 ports detected [ 56.076136] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 56.076143] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 56.076146] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 56.076170] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 56.076193] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20 [ 56.076278] usb usb4: configuration #1 chosen from 1 choice [ 56.076299] hub 4-0:1.0: USB hub found [ 56.076303] hub 4-0:1.0: 2 ports detected [ 56.314684] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 56.451081] ioc0: LSISAS1068 B0: Capabilities={Initiator} [ 56.468386] usb 3-1: configuration #1 chosen from 1 choice [ 56.471311] hub 3-1:1.0: USB hub found [ 56.473278] hub 3-1:1.0: 4 ports detected [ 56.787489] usb 3-1.1: new low speed USB device using uhci_hcd and address 3 [ 56.974079] usb 3-1.1: configuration #1 chosen from 1 choice [ 57.182497] usb 3-1.4: new full speed USB device using uhci_hcd and address 4 [ 57.318225] usb 3-1.4: configuration #1 chosen from 1 choice [ 57.761748] scsi0 : ioc0: LSISAS1068 B0, FwRev=000a3100h, Ports=1, MaxQ=286, IRQ=24 [ 57.786191] scsi 0:0:0:0: Direct-Access SEAGATE ST3146755SS T107 PQ: 0 ANSI: 5 [ 57.789928] scsi 0:0:1:0: Direct-Access ATA ST3750640AS D PQ: 0 ANSI: 5 [ 57.791720] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21 [ 57.792544] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 57.792550] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 57.792600] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 57.796504] ehci_hcd 0000:00:1d.7: debug port 1 [ 57.796509] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 57.796515] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xff980800 [ 57.800429] Driver 'sd' needs updating - please use bus_type methods [ 57.801040] sd 0:0:0:0: [sda] 286749480 512-byte hardware sectors (146816 MB) [ 57.802094] sd 0:0:0:0: [sda] Write Protect is off [ 57.802096] sd 0:0:0:0: [sda] Mode Sense: b3 00 10 08 [ 57.803780] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 57.804426] sd 0:0:0:0: [sda] 286749480 512-byte hardware sectors (146816 MB) [ 57.810725] sd 0:0:0:0: [sda] Write Protect is off [ 57.810728] sd 0:0:0:0: [sda] Mode Sense: b3 00 10 08 [ 57.814864] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 57.814964] usb usb5: configuration #1 chosen from 1 choice [ 57.814983] hub 5-0:1.0: USB hub found [ 57.814990] hub 5-0:1.0: 8 ports detected [ 57.817680] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 57.817684] sda:<6>usbcore: registered new interface driver hiddev [ 57.817896] sda1 sda2 sda3 sda4 [ 57.830776] sd 0:0:0:0: [sda] Attached SCSI disk [ 57.831126] sd 0:0:1:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB) [ 57.867799] usbcore: registered new interface driver usbhid [ 57.867802] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 57.869220] sd 0:0:1:0: [sdb] Write Protect is off [ 57.869223] sd 0:0:1:0: [sdb] Mode Sense: 73 00 00 08 [ 57.871347] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 57.871641] sd 0:0:1:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB) [ 57.902450] sd 0:0:1:0: [sdb] Write Protect is off [ 57.902453] sd 0:0:1:0: [sdb] Mode Sense: 73 00 00 08 [ 57.904580] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 57.904585] sdb:<6>ACPI: PCI Interrupt 0000:0f:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 57.918397] sdb1 [ 57.918441] sd 0:0:1:0: [sdb] Attached SCSI disk [ 57.964847] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[d4ffb800-d4ffbfff] Max Packet=[2048] IR/IT contexts=[4/8] [ 57.964936] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 57.964954] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 57.970450] ata_piix 0000:00:1f.1: version 2.12 [ 57.970467] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 57.970496] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 57.970641] scsi1 : ata_piix [ 57.970861] scsi2 : ata_piix [ 57.970882] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 57.970884] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 58.169967] usb 3-1: USB disconnect, address 2 [ 58.169971] usb 3-1.1: USB disconnect, address 3 [ 58.170152] usb 3-1.4: USB disconnect, address 4 [ 58.207007] Attempting manual resume [ 58.207009] swsusp: Resume From Partition 8:4 [ 58.207010] PM: Checking swsusp image. [ 58.207210] PM: Resume from disk failed. [ 58.215993] kjournald starting. Commit interval 5 seconds [ 58.216003] EXT3-fs: mounted filesystem with ordered data mode. [ 58.290725] ata1.00: ATAPI: PHILIPS DVD+/-RW DVD8801, AD21, max UDMA/33 [ 58.409875] usb 3-1: new full speed USB device using uhci_hcd and address 5 [ 58.462213] ata1.00: configured for UDMA/33 [ 58.462249] ata2: port disabled. ignoring. [ 58.464293] scsi 1:0:0:0: CD-ROM PHILIPS DVD+-RW DVD8801 AD21 PQ: 0 ANSI: 5 [ 58.464375] scsi 1:0:0:0: Attached scsi generic sg2 type 5 [ 58.464454] tg3.c:v3.86 (November 9, 2007) [ 58.464476] ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 58.464485] PCI: Setting latency timer of device 0000:0e:00.0 to 64 [ 58.481917] eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:19:b9:23:b6:2f [ 58.481922] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 58.481923] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 58.481965] ahci 0000:00:1f.2: version 3.0 [ 58.481991] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20 [ 58.482748] ahci 0000:00:1f.2: nr_ports (6) and implemented port map (0x7) don't match, using nr_ports [ 58.482752] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x3f [ 58.558147] usb 3-1: configuration #1 chosen from 1 choice [ 58.561087] hub 3-1:1.0: USB hub found [ 58.563042] hub 3-1:1.0: 4 ports detected [ 58.882243] usb 3-1.1: new low speed USB device using uhci_hcd and address 6 [ 59.066863] usb 3-1.1: configuration #1 chosen from 1 choice [ 59.094933] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1.1/3-1.1:1.0/input/input1 [ 59.119805] input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.2-1.1 [ 59.154694] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1.1/3-1.1:1.1/input/input2 [ 59.179648] input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.2-1.1 [ 59.235839] ieee1394: Host added: ID:BUS[0-00:1023] GUID[80b919002fb62300] [ 59.384982] usb 3-1.4: new full speed USB device using uhci_hcd and address 7 [ 59.483353] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 59.483357] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part [ 59.483361] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 59.483614] scsi3 : ahci [ 59.483683] scsi4 : ahci [ 59.483748] scsi5 : ahci [ 59.483788] scsi6 : ahci [ 59.483829] scsi7 : ahci [ 59.483869] scsi8 : ahci [ 59.483897] ata3: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970100 irq 20 [ 59.483899] ata4: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970180 irq 20 [ 59.483901] ata5: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970200 irq 20 [ 59.483903] ata6: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970280 irq 20 [ 59.483905] ata7: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970300 irq 20 [ 59.483906] ata8: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970380 irq 20 [ 59.527687] usb 3-1.4: configuration #1 chosen from 1 choice [ 59.534831] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1.4/3-1.4:1.0/input/input3 [ 59.550700] input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1.4 [ 59.555600] hiddev96hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1.4 [ 59.794275] ata3: SATA link down (SStatus 0 SControl 300) [ 60.105466] ata4: SATA link down (SStatus 0 SControl 300) [ 60.416192] ata5: SATA link down (SStatus 0 SControl 300) [ 60.727911] ata6: SATA link down (SStatus 0 SControl 0) [ 61.038574] ata7: SATA link down (SStatus 0 SControl 0) [ 61.354282] ata8: SATA link down (SStatus 0 SControl 0) [ 63.923047] ip_tables: (C) 2000-2006 Netfilter Core Team [ 63.947691] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 64.283006] iTCO_vendor_support: vendor-support=0 [ 64.294664] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 64.294737] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 64.294750] iTCO_wdt: No card detected [ 64.390179] parport_pc 00:06: reported by Plug and Play ACPI [ 64.390232] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 64.417372] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 64.444513] EDAC MC: Ver: 2.1.0 May 28 2008 [ 64.462466] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 [ 64.462488] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) [ 64.469294] intel_rng: Firmware space is locked read-only. If you can't or [ 64.469295] intel_rng: don't want to disable this in firmware setup, and if [ 64.469296] intel_rng: you are certain that your system has a functional [ 64.469297] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 64.471111] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 64.501814] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 64.523384] input: Power Button (FF) as /devices/virtual/input/input4 [ 64.677262] ACPI: Power Button (FF) [PWRF] [ 64.677315] input: Power Button (CM) as /devices/virtual/input/input5 [ 64.721797] Driver 'sr' needs updating - please use bus_type methods [ 64.744452] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 64.744458] Uniform CD-ROM driver Revision: 3.20 [ 64.744506] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 64.757090] ACPI: Power Button (CM) [VBTN] [ 64.919691] nvidia: module license 'NVIDIA' taints kernel. [ 65.173459] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 65.173470] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 65.173554] PCI: Enabling device 0000:0a:00.0 (0000 -> 0002) [ 65.173562] ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 65.173568] PCI: Setting latency timer of device 0000:0a:00.0 to 64 [ 65.173654] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 [ 65.316679] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 65.317470] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 65.790249] lp0: using parport0 (interrupt-driven). [ 65.847432] Adding 1911724k swap on /dev/sda4. Priority:-1 extents:1 across:1911724k [ 66.374339] EXT3 FS on sda2, internal journal [ 67.056032] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 67.057030] SGI XFS Quota Management subsystem [ 67.083560] XFS mounting filesystem sdb1 [ 67.191820] Ending clean XFS mount for filesystem: sdb1 [ 67.194378] kjournald starting. Commit interval 5 seconds [ 67.194665] EXT3 FS on sda3, internal journal [ 67.194671] EXT3-fs: mounted filesystem with ordered data mode.