[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003fff0c00 (reserved) [ 0.000000] BIOS-e820: 000000003fff0c00 - 000000003fffc000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fffc000 - 0000000040000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262096) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262096 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262096 [ 0.000000] On node 0 totalpages: 262096 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32465 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7EB0 checksum 0 [ 0.000000] ACPI: RSDP 000F7EB0, 0014 (r0 COMPAQ) [ 0.000000] ACPI: RSDT 3FFF0C84, 002C (r1 HP HP088C 9110520 CPQ 1) [ 0.000000] ACPI: FACP 3FFF0C00, 0084 (r2 HP HP088C 2 CPQ 1) [ 0.000000] ACPI: DSDT 3FFF0CB0, 6F63 (r1 HP nc8000 10000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFFBE80, 0040 [ 0.000000] ACPI: SSDT 3FFF7C13, 028A (r1 COMPAQ CPQGysr 1001 MSFT 100000E) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260049 [ 0.000000] Kernel command line: root=UUID=8e3a89a8-8898-4dd1-bf28-12c9955c72f3 ro quiet splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (0180f000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1694.604 MHz processor. [ 14.811229] Console: colour VGA+ 80x25 [ 14.811233] console [tty0] enabled [ 14.811840] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 14.812553] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 14.849910] Memory: 1026896k/1048384k available (2157k kernel code, 20800k reserved, 998k data, 364k init, 130880k highmem) [ 14.849919] virtual kernel memory layout: [ 14.849920] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 14.849921] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 14.849923] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 14.849924] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 14.849925] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 14.849927] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 14.849928] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 14.849932] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 14.849994] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 14.929983] Calibrating delay using timer specific routine.. 3391.60 BogoMIPS (lpj=6783207) [ 14.930024] Security Framework initialized [ 14.930037] SELinux: Disabled at boot. [ 14.930059] AppArmor: AppArmor initialized [ 14.930064] Failure registering capabilities with primary security module. [ 14.930075] Mount-cache hash table entries: 512 [ 14.930256] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000 [ 14.930273] CPU: L1 I cache: 32K, L1 D cache: 32K [ 14.930275] CPU: L2 cache: 1024K [ 14.930279] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 00000000 [ 14.930290] Compat vDSO mapped to ffffe000. [ 14.930306] Checking 'hlt' instruction... OK. [ 14.946393] SMP alternatives: switching to UP code [ 14.948403] Freeing SMP alternatives: 11k freed [ 14.948538] Early unpacking initramfs... done [ 15.339507] ACPI: Core revision 20070126 [ 15.339587] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 15.342373] ACPI: setting ELCR to 0200 (from 0c00) [ 15.405291] CPU0: Intel(R) Pentium(R) M processor 1700MHz stepping 05 [ 15.405296] SMP motherboard not detected. [ 15.405299] Local APIC not detected. Using dummy APIC emulation. [ 15.405345] Brought up 1 CPUs [ 15.405365] CPU0 attaching sched-domain: [ 15.405368] domain 0: span 01 [ 15.405370] groups: 01 [ 15.405553] net_namespace: 64 bytes [ 15.405563] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 15.405566] Booting paravirtualized kernel on bare hardware [ 15.406204] Time: 16:47:45 Date: 04/29/08 [ 15.406231] NET: Registered protocol family 16 [ 15.406426] EISA bus registered [ 15.406440] ACPI: bus type pci registered [ 15.407625] PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=5 [ 15.407627] PCI: Using configuration type 1 [ 15.407629] Setting up standard PCI resources [ 15.409570] ACPI: EC: Look up EC in DSDT [ 15.410456] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 15.426497] ACPI: Interpreter enabled [ 15.426501] ACPI: (supports S0 S3 S4 S5) [ 15.426513] ACPI: Using PIC for interrupt routing [ 15.434805] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 15.434808] ACPI: EC: driver started in interrupt mode [ 15.434854] ACPI: PCI Root Bridge [C044] (0000:00) [ 15.435241] PCI: Enabled i801 SMBus device [ 15.435246] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 15.435250] PCI quirk: region 1100-113f claimed by ICH4 GPIO [ 15.435900] PCI: Transparent bridge - 0000:00:1e.0 [ 15.436033] ACPI: PCI Interrupt Routing Table [\_SB_.C044._PRT] [ 15.436226] ACPI: PCI Interrupt Routing Table [\_SB_.C044.C045._PRT] [ 15.436320] ACPI: PCI Interrupt Routing Table [\_SB_.C044.C056._PRT] [ 15.446152] ACPI: PCI Interrupt Link [C0C1] (IRQs *10 11) [ 15.446336] ACPI: PCI Interrupt Link [C0C2] (IRQs 10 *11) [ 15.446516] ACPI: PCI Interrupt Link [C0C3] (IRQs *10 11) [ 15.446696] ACPI: PCI Interrupt Link [C0C4] (IRQs *10 11) [ 15.446875] ACPI: PCI Interrupt Link [C0C5] (IRQs 10 *11) [ 15.447054] ACPI: PCI Interrupt Link [C0C6] (IRQs 10 *11) [ 15.447226] ACPI: PCI Interrupt Link [C0C7] (IRQs 10 11) *0, disabled. [ 15.447406] ACPI: PCI Interrupt Link [C0C8] (IRQs *10 11) [ 15.447683] ACPI: Power Resource [C16D] (on) [ 15.447830] ACPI: Power Resource [C13D] (on) [ 15.447989] ACPI: Power Resource [C184] (on) [ 15.448138] ACPI: Power Resource [C18B] (on) [ 15.448176] ACPI: Power Resource [C195] (on) [ 15.448229] ACPI: Power Resource [C0E6] (on) [ 15.448309] ACPI: Power Resource [C20E] (off) [ 15.448383] ACPI: Power Resource [C20F] (off) [ 15.448457] ACPI: Power Resource [C210] (off) [ 15.448531] ACPI: Power Resource [C211] (off) [ 15.448573] Linux Plug and Play Support v0.97 (c) Adam Belay [ 15.448602] pnp: PnP ACPI init [ 15.448610] ACPI: bus type pnp registered [ 15.457950] pnp: PnP ACPI: found 16 devices [ 15.457953] ACPI: ACPI bus type pnp unregistered [ 15.457957] PnPBIOS: Disabled by ACPI PNP [ 15.458180] PCI: Using ACPI for IRQ routing [ 15.458182] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 15.545712] NET: Registered protocol family 8 [ 15.545714] NET: Registered protocol family 20 [ 15.545784] AppArmor: AppArmor Filesystem Enabled [ 15.549702] Time: tsc clocksource has been installed. [ 15.557733] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 15.557736] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 15.557739] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved [ 15.557750] system 00:0d: ioport range 0x140-0x14f has been reserved [ 15.557753] system 00:0d: iomem range 0xffb00000-0xffbfffff has been reserved [ 15.557756] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved [ 15.557762] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved [ 15.557765] system 00:0e: ioport range 0x1000-0x107f has been reserved [ 15.557768] system 00:0e: ioport range 0x1100-0x113f has been reserved [ 15.557771] system 00:0e: ioport range 0x1200-0x121f has been reserved [ 15.557774] system 00:0e: iomem range 0xfec00000-0xfec000ff has been reserved [ 15.557779] system 00:0f: iomem range 0xfec01000-0xfec01fff has been reserved [ 15.588186] PCI: Bridge: 0000:00:01.0 [ 15.588189] IO window: 2000-2fff [ 15.588193] MEM window: 90400000-904fffff [ 15.588196] PREFETCH window: 98000000-9fffffff [ 15.588209] PCI: Bus 3, cardbus bridge: 0000:02:06.0 [ 15.588212] IO window: 00001400-000014ff [ 15.588216] IO window: 00001800-000018ff [ 15.588220] PREFETCH window: 54000000-57ffffff [ 15.588224] MEM window: 58000000-5bffffff [ 15.588227] PCI: Bus 5, cardbus bridge: 0000:02:06.1 [ 15.588229] IO window: 00001c00-00001cff [ 15.588233] IO window: 00004000-000040ff [ 15.588237] PREFETCH window: 5c000000-5fffffff [ 15.588241] MEM window: 60000000-63ffffff [ 15.588245] PCI: Bus 9, cardbus bridge: 0000:02:06.3 [ 15.588247] IO window: 00004400-000044ff [ 15.588250] IO window: 00004800-000048ff [ 15.588254] PREFETCH window: 64000000-67ffffff [ 15.588258] MEM window: 68000000-6bffffff [ 15.588262] PCI: Bridge: 0000:00:1e.0 [ 15.588263] IO window: disabled. [ 15.588268] MEM window: 90000000-903fffff [ 15.588272] PREFETCH window: disabled. [ 15.588287] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 15.588587] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10 [ 15.588590] PCI: setting IRQ 10 as level-triggered [ 15.588594] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 15.588610] ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 15.588624] ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 15.588640] NET: Registered protocol family 2 [ 15.625752] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 15.626058] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 15.627524] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 15.628516] TCP: Hash tables configured (established 131072 bind 65536) [ 15.628520] TCP reno registered [ 15.637862] checking if image is initramfs... it is [ 16.089479] Switched to high resolution mode on CPU 0 [ 16.397629] Freeing initrd memory: 7695k freed [ 16.398181] audit: initializing netlink socket (disabled) [ 16.398200] audit(1209487666.496:1): initialized [ 16.398381] highmem bounce pool size: 64 pages [ 16.400470] VFS: Disk quotas dquot_6.5.1 [ 16.400561] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 16.400719] io scheduler noop registered [ 16.400721] io scheduler anticipatory registered [ 16.400723] io scheduler deadline registered [ 16.400739] io scheduler cfq registered (default) [ 16.400812] Boot video device is 0000:01:00.0 [ 16.401117] isapnp: Scanning for PnP cards... [ 16.754972] isapnp: No Plug & Play device found [ 16.786750] Real Time Clock Driver v1.12ac [ 16.786882] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 16.787008] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 16.787216] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A [ 16.787666] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 16.788356] ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 11 [ 16.788360] PCI: setting IRQ 11 as level-triggered [ 16.788364] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C2] -> GSI 11 (level, low) -> IRQ 11 [ 16.788374] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 16.789006] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 16.789298] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 16.789407] PNP: PS/2 Controller [PNP0303:C192,PNP0f13:C193] at 0x60,0x64 irq 1,12 [ 16.791235] i8042.c: Detected active multiplexing controller, rev 1.1. [ 16.791944] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 16.791948] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 16.791951] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 16.791953] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 16.791956] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 16.801139] mice: PS/2 mouse device common for all mice [ 16.801248] EISA: Probing bus 0 at eisa.0 [ 16.801255] Cannot allocate resource for EISA slot 1 [ 16.801259] Cannot allocate resource for EISA slot 2 [ 16.801261] Cannot allocate resource for EISA slot 3 [ 16.801263] Cannot allocate resource for EISA slot 4 [ 16.801282] EISA: Detected 0 cards. [ 16.801285] cpuidle: using governor ladder [ 16.801287] cpuidle: using governor menu [ 16.801398] NET: Registered protocol family 1 [ 16.801428] Using IPI No-Shortcut mode [ 16.801461] registered taskstats version 1 [ 16.801577] Magic number: 4:101:794 [ 16.801674] hash matches device ptyr2 [ 16.801731] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 16.801733] EDD information not available. [ 16.801962] Freeing unused kernel memory: 364k freed [ 16.829078] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 18.014598] fuse init (API version 7.9) [ 18.030484] ACPI: Transitioning device [C212] to D3 [ 18.030488] ACPI: Transitioning device [C212] to D3 [ 18.030492] ACPI: Fan [C212] (off) [ 18.030634] ACPI: Transitioning device [C213] to D3 [ 18.030636] ACPI: Transitioning device [C213] to D3 [ 18.030639] ACPI: Fan [C213] (off) [ 18.030779] ACPI: Transitioning device [C214] to D3 [ 18.030781] ACPI: Transitioning device [C214] to D3 [ 18.030784] ACPI: Fan [C214] (off) [ 18.030923] ACPI: Transitioning device [C215] to D3 [ 18.030925] ACPI: Transitioning device [C215] to D3 [ 18.030928] ACPI: Fan [C215] (off) [ 18.037774] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 18.037780] ACPI: Processor [CPU0] (supports 8 throttling states) [ 18.050999] ACPI: Thermal Zone [TZ1] (57 C) [ 18.061358] ACPI: Thermal Zone [TZ2] (48 C) [ 18.064997] ACPI: Thermal Zone [TZ3] (32 C) [ 18.992086] usbcore: registered new interface driver usbfs [ 18.992114] usbcore: registered new interface driver hub [ 18.996016] usbcore: registered new device driver usb [ 19.012872] USB Universal Host Controller Interface driver v3.0 [ 19.013282] ACPI: PCI Interrupt Link [C0C1] enabled at IRQ 10 [ 19.013286] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0C1] -> GSI 10 (level, low) -> IRQ 10 [ 19.013299] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 19.013303] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 19.013742] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 19.013768] uhci_hcd 0000:00:1d.0: irq 10, io base 0x000038c0 [ 19.013929] usb usb1: configuration #1 chosen from 1 choice [ 19.013957] hub 1-0:1.0: USB hub found [ 19.013963] hub 1-0:1.0: 2 ports detected [ 19.116366] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10 [ 19.116371] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0C4] -> GSI 10 (level, low) -> IRQ 10 [ 19.116384] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 19.116388] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 19.116416] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 19.116440] uhci_hcd 0000:00:1d.1: irq 10, io base 0x000038e0 [ 19.116566] usb usb2: configuration #1 chosen from 1 choice [ 19.116590] hub 2-0:1.0: USB hub found [ 19.116596] hub 2-0:1.0: 2 ports detected [ 19.136212] SCSI subsystem initialized [ 19.219970] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 19.219986] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 19.219991] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 19.220015] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 19.220039] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003c00 [ 19.220171] usb usb3: configuration #1 chosen from 1 choice [ 19.220196] hub 3-0:1.0: USB hub found [ 19.220201] hub 3-0:1.0: 2 ports detected [ 19.247876] libata version 3.00 loaded. [ 19.324381] ACPI: PCI Interrupt Link [C0C8] enabled at IRQ 10 [ 19.324386] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [C0C8] -> GSI 10 (level, low) -> IRQ 10 [ 19.324401] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 19.324405] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 19.324432] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 19.328356] ehci_hcd 0000:00:1d.7: debug port 1 [ 19.328363] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 19.328371] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xa0000000 [ 19.343800] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 19.343958] usb usb4: configuration #1 chosen from 1 choice [ 19.343987] hub 4-0:1.0: USB hub found [ 19.343996] hub 4-0:1.0: 6 ports detected [ 19.402554] Floppy drive(s): fd0 is 1.44M [ 19.419455] FDC 0 is a post-1991 82077 [ 19.447997] tg3.c:v3.86 (November 9, 2007) [ 19.448357] ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 11 [ 19.448360] ACPI: PCI Interrupt 0000:02:0e.0[A] -> Link [C0C5] -> GSI 11 (level, low) -> IRQ 11 [ 19.500356] eth0: Tigon3 [partno(BMC5705mA3) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:08:02:e2:cf:a2 [ 19.500365] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 19.500368] eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 19.504000] ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [C0C8] -> GSI 10 (level, low) -> IRQ 10 [ 19.553750] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[90380000-903807ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 19.625697] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 19.625709] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 19.625753] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 19.625767] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 19.639942] ata_piix 0000:00:1f.1: version 2.12 [ 19.639966] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 19.640008] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 19.647250] scsi0 : ata_piix [ 19.647968] scsi1 : ata_piix [ 19.648746] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3c20 irq 14 [ 19.648749] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3c28 irq 15 [ 19.976031] ata1.00: ATA-6: HTS726060M9AT00, MH4OA6AA, max UDMA/100 [ 19.976036] ata1.00: 117210240 sectors, multi 16: LBA48 [ 19.976061] ata1.01: ATAPI: SD-R2512, 1A04, max MWDMA2 [ 19.991955] ata1.00: configured for UDMA/100 [ 20.179703] ata1.01: configured for MWDMA2 [ 20.311309] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 20.335460] scsi 0:0:0:0: Direct-Access ATA HTS726060M9AT00 MH4O PQ: 0 ANSI: 5 [ 20.352403] scsi 0:0:1:0: CD-ROM TOSHIBA DVD-ROM SD-R2512 1A04 PQ: 0 ANSI: 5 [ 20.365666] Driver 'sd' needs updating - please use bus_type methods [ 20.365761] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 20.365774] sd 0:0:0:0: [sda] Write Protect is off [ 20.365777] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.365794] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.365841] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 20.365851] sd 0:0:0:0: [sda] Write Protect is off [ 20.365853] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.365868] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.365872] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 20.388929] sda1 sda2 sda3 sda4 < sda5 > [ 20.407058] sd 0:0:0:0: [sda] Attached SCSI disk [ 20.415210] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.415231] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 20.425905] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 20.425910] Uniform CD-ROM driver Revision: 3.20 [ 20.425973] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 20.482673] usb 2-1: configuration #1 chosen from 1 choice [ 20.723117] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 20.726710] Attempting manual resume [ 20.726713] swsusp: Resume From Partition 8:5 [ 20.726715] PM: Checking swsusp image. [ 20.726894] PM: Resume from disk failed. [ 20.766375] kjournald starting. Commit interval 5 seconds [ 20.766386] EXT3-fs: mounted filesystem with ordered data mode. [ 20.895146] ieee1394: Host added: ID:BUS[0-00:1023] GUID[718b5000000000a2] [ 21.063948] usb 3-1: configuration #1 chosen from 1 choice [ 21.068057] usbcore: registered new interface driver hiddev [ 21.084578] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2 [ 21.094941] input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1d.1-1 [ 21.094970] usbcore: registered new interface driver usbhid [ 21.094973] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 32.993026] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 33.046498] intel_rng: FWH not detected [ 33.085108] Linux agpgart interface v0.102 [ 33.121577] agpgart: Detected an Intel 855PM Chipset. [ 33.136478] agpgart: AGP aperture is 256M @ 0xb0000000 [ 33.180910] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 33.369750] iTCO_vendor_support: vendor-support=0 [ 33.432698] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 33.432790] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 33.432824] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 33.484757] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 33.680692] input: Power Button (FF) as /devices/virtual/input/input4 [ 33.696534] ACPI: Power Button (FF) [PWRF] [ 33.696668] input: Sleep Button (CM) as /devices/virtual/input/input5 [ 33.708545] ACPI: Sleep Button (CM) [C139] [ 33.708635] input: Lid Switch as /devices/virtual/input/input6 [ 33.708738] ACPI: Lid Switch [C138] [ 33.769718] ACPI: AC Adapter [C134] (on-line) [ 34.208096] ACPI: Battery Slot [C137] (battery present) [ 34.208303] ACPI: Battery Slot [C136] (battery absent) [ 34.208792] ACPI: WMI-Acer: Mapper loaded [ 35.780041] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input7 [ 35.795477] ACPI: Video Device [C0CF] (multi-head: yes rom: no post: no) [ 36.781490] ath_hal: module license 'Proprietary' taints kernel. [ 36.826986] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 36.970605] Yenta: CardBus bridge found at 0000:02:06.0 [103c:088c] [ 36.970626] Yenta O2: res at 0x94/0xD4: ea/00 [ 36.970628] Yenta O2: enabling read prefetch/write burst [ 37.095542] Yenta: ISA IRQ mask 0x00b8, PCI irq 10 [ 37.095547] Socket status: 30000006 [ 37.095552] pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff [ 37.154381] Yenta: CardBus bridge found at 0000:02:06.1 [103c:088c] [ 37.243615] wlan: 0.9.4 [ 37.279491] Yenta: ISA IRQ mask 0x00b8, PCI irq 10 [ 37.279496] Socket status: 30000006 [ 37.279498] Yenta: Raising subordinate bus# of parent bus (#02) from #05 to #08 [ 37.279506] pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff [ 37.319173] Yenta: CardBus bridge found at 0000:02:06.3 [103c:088c] [ 37.447483] Yenta: ISA IRQ mask 0x00b8, PCI irq 10 [ 37.447488] Socket status: 30000006 [ 37.447491] Yenta: Raising subordinate bus# of parent bus (#02) from #08 to #0c [ 37.447497] pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff [ 37.476225] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes. [ 37.476266] [fglrx] ASYNCIO init succeed! [ 37.476521] [fglrx] PAT is enabled successfully! [ 37.478852] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0 [ 37.742532] ath_pci: 0.9.4 [ 37.742941] ACPI: PCI Interrupt Link [C0C6] enabled at IRQ 11 [ 37.742945] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C6] -> GSI 11 (level, low) -> IRQ 11 [ 38.329409] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1b6eb1, caps: 0xa84793/0x100000 [ 38.329416] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 38.374626] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 38.434266] parport_pc 00:05: reported by Plug and Play ACPI [ 38.434316] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 38.543356] irda_init() [ 38.543379] NET: Registered protocol family 23 [ 38.590168] Detected unconfigured HP nc8000 family SMSC IrDA chip, pre-configuring device. [ 38.590173] Setting up Intel 82801 controller and SMSC device [ 38.590189] Detected Chip id: 0x5a, setting up registers... [ 38.590327] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x004e): LPC47N227 [ 38.590343] smsc_superio_flat(): fir: 0x130, sir: 0x2f8, dma: 03, irq: 5, mode: 0x0e [ 38.590357] SMsC IrDA Controller found [ 38.590358] IrCC version 2.0, firport 0x130, sirport 0x2f8 dma=3, irq=5 [ 38.590411] smsc_ircc_set_sir_speed(), Setting speed to: 9600 [ 38.590423] No transceiver found. Defaulting to Fast pin select [ 38.590747] IrDA: Registered device irda0 [ 38.623648] tpm_inf_pnp 00:0c: Found C197 with ID IFX0101 [ 38.623688] tpm_inf_pnp 00:0c: TPM found: config base 0xe0, data base 0x1400, chip version 0x0006, vendor id 0x15d1 (Infineon), product id 0x0006 (SLD 9630 TT 1.1) [ 38.758010] ath_rate_sample: 1.2 (0.9.4) [ 38.758888] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 38.758893] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 38.758903] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 38.758907] wifi0: mac 5.6 phy 4.1 radio 1.7 [ 38.758911] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 38.758913] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 38.758915] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 38.758917] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 38.758920] wifi0: Use hw queue 8 for CAB traffic [ 38.758921] wifi0: Use hw queue 9 for beacons [ 38.823637] wifi0: Atheros 5212: mem=0x90080000, irq=11 [ 38.823932] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [C0C2] -> GSI 11 (level, low) -> IRQ 11 [ 38.823963] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 39.297901] Bluetooth: Core ver 2.11 [ 39.312984] NET: Registered protocol family 31 [ 39.312988] Bluetooth: HCI device and connection manager initialized [ 39.312992] Bluetooth: HCI socket layer initialized [ 39.338724] Bluetooth: HCI USB driver ver 2.9 [ 39.341762] usbcore: registered new interface driver hci_usb [ 39.749514] intel8x0_measure_ac97_clock: measured 55422 usecs [ 39.749519] intel8x0: clocking to 48000 [ 41.591527] cs: IO port probe 0x100-0x3af: clean. [ 41.593237] cs: IO port probe 0x3e0-0x4ff: clean. [ 41.593962] cs: IO port probe 0x820-0x8ff: clean. [ 41.594592] cs: IO port probe 0xc00-0xcf7: clean. [ 41.595382] cs: IO port probe 0xa00-0xaff: clean. [ 41.596243] cs: IO port probe 0x100-0x3af: clean. [ 41.597957] cs: IO port probe 0x3e0-0x4ff: clean. [ 41.598672] cs: IO port probe 0x820-0x8ff: clean. [ 41.599302] cs: IO port probe 0xc00-0xcf7: clean. [ 41.600091] cs: IO port probe 0xa00-0xaff: clean. [ 41.600948] cs: IO port probe 0x100-0x3af: clean. [ 41.602639] cs: IO port probe 0x3e0-0x4ff: clean. [ 41.603355] cs: IO port probe 0x820-0x8ff: clean. [ 41.603994] cs: IO port probe 0xc00-0xcf7: clean. [ 41.604797] cs: IO port probe 0xa00-0xaff: clean. [ 42.566492] lp0: using parport0 (interrupt-driven). [ 42.649448] Adding 2096440k swap on /dev/sda5. Priority:-1 extents:1 across:2096440k [ 43.188902] EXT3 FS on sda3, internal journal [ 43.405170] device-mapper: uevent: version 1.0.3 [ 43.405205] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 43.965745] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input9 [ 45.487767] ip_tables: (C) 2000-2006 Netfilter Core Team [ 47.170268] ttyS0: LSR safety check engaged! [ 47.170325] ttyS0: LSR safety check engaged! [ 47.170870] ttyS0: LSR safety check engaged! [ 47.171631] ttyS2: LSR safety check engaged! [ 47.171679] ttyS2: LSR safety check engaged! [ 47.172075] ttyS2: LSR safety check engaged! [ 47.215819] CIFS VFS: Error connecting to IPv4 socket. Aborting operation [ 47.215827] CIFS VFS: cifs_mount failed w/return code = -101 [ 47.216818] CIFS VFS: Error connecting to IPv4 socket. Aborting operation [ 47.216822] CIFS VFS: cifs_mount failed w/return code = -101 [ 47.218065] CIFS VFS: Error connecting to IPv4 socket. Aborting operation [ 47.218071] CIFS VFS: cifs_mount failed w/return code = -101 [ 47.218802] CIFS VFS: Error connecting to IPv4 socket. Aborting operation [ 47.218806] CIFS VFS: cifs_mount failed w/return code = -101 [ 47.219504] CIFS VFS: Error connecting to IPv4 socket. Aborting operation [ 47.219508] CIFS VFS: cifs_mount failed w/return code = -101 [ 47.220205] CIFS VFS: Error connecting to IPv4 socket. Aborting operation [ 47.220209] CIFS VFS: cifs_mount failed w/return code = -101 [ 47.220902] CIFS VFS: Error connecting to IPv4 socket. Aborting operation [ 47.220906] CIFS VFS: cifs_mount failed w/return code = -101 [ 47.221596] CIFS VFS: Error connecting to IPv4 socket. Aborting operation [ 47.221600] CIFS VFS: cifs_mount failed w/return code = -101 [ 47.222318] CIFS VFS: Error connecting to IPv4 socket. Aborting operation [ 47.222323] CIFS VFS: cifs_mount failed w/return code = -101 [ 47.243131] pnp 00:04: disabled [ 47.245398] pnp 00:04: activated [ 47.670324] No dock devices found. [ 49.572871] ttyS0: LSR safety check engaged! [ 52.576325] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C2] -> GSI 11 (level, low) -> IRQ 11 [ 52.576347] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 55.485127] ppdev: user-space parallel port driver [ 55.857857] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0C1] -> GSI 10 (level, low) -> IRQ 10 [ 55.898330] audit(1209476906.412:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5696 profile="/usr/sbin/cupsd" namespace="default" [ 59.011813] [fglrx] Internal AGP support requested, but kernel AGP support active. [ 59.011820] [fglrx] Have to use kernel AGP support to avoid conflicts. [ 59.011824] [fglrx] AGP detected, AgpState = 0x1f000217 (hardware caps of chipset) [ 59.013207] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 59.013595] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 59.013999] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 59.014421] [fglrx] AGP enabled, AgpCommand = 0x1f000314 (selected caps) [ 59.018712] [fglrx] GART Table is not in FRAME_BUFFER range [ 59.018727] [fglrx] Reserve Block - 0 offset = 0X7ff0000 length = 0X10000 [ 59.018730] [fglrx] Reserve Block - 1 offset = 0X7fef000 length = 0X1000 [ 59.018733] [fglrx] Reserve Block - 2 offset = 0X7fee000 length = 0X1000 [ 59.018735] [fglrx] Reserve Block - 3 offset = 0X0 length = 0X40000 [ 59.225234] [fglrx] interrupt source 20008000 successfully enabled [ 59.225241] [fglrx] enable ID = 0x00000004 [ 59.225251] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 59.225306] [fglrx] interrupt source 10000000 successfully enabled [ 59.225309] [fglrx] enable ID = 0x00000005 [ 59.225312] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 59.660847] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 59.660852] apm: overridden by ACPI. [ 64.089628] smsc_ircc_change_speed() changing speed to: 9600 [ 64.089654] smsc_ircc_set_sir_speed(), Setting speed to: 9600 [ 64.089675] irlap_change_speed(), setting speed to 9600 [ 190.756352] Marking TSC unstable due to: cpufreq changes. [ 190.767607] Time: acpi_pm clocksource has been installed. [ 191.023605] Clocksource tsc unstable (delta = -172958005 ns) [ 194.642965] Bluetooth: L2CAP ver 2.9 [ 194.642975] Bluetooth: L2CAP socket layer initialized [ 68.751633] Bluetooth: RFCOMM socket layer initialized [ 68.751650] Bluetooth: RFCOMM TTY layer initialized [ 68.751652] Bluetooth: RFCOMM ver 1.8 [ 72.835737] NET: Registered protocol family 10 [ 72.836485] lo: Disabled Privacy Extensions [ 72.837321] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 79.726176] ath0: no IPv6 routers present [ 109.730808] NET: Registered protocol family 17 [ 128.016120] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 190.491585] ath0: no IPv6 routers present [ 784.495941] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 784.709427] usb 1-1: configuration #1 chosen from 1 choice [21685.496295] usb 1-1: USB disconnect, address 2 [22476.173955] ADDRCONF(NETDEV_UP): ath0: link is not ready [16857.534088] ACPI: PCI interrupt for device 0000:02:04.0 disabled [16857.534148] ath_pci: driver unloaded [22477.819292] ACPI: PCI interrupt for device 0000:02:0e.0 disabled [ 7931.797069] PM: suspend-to-disk mode set to 'platform' [ 7931.797578] swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 7931.797584] swsusp: Basic memory bitmaps created [ 7931.797586] Syncing filesystems ... done. [ 7931.802081] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 7931.803276] Freezing remaining freezable tasks ... (elapsed 7.24 seconds) done. [ 7939.042700] Shrinking memory... -\done (11723 pages freed) [ 7939.220126] Freed 46892 kbytes in 0.17 seconds (275.83 MB/s) [ 7939.220129] Suspending console(s) [ 7939.226297] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7939.226746] ACPI handle has no context! [ 7939.227741] parport_pc 00:05: disabled [ 7939.228380] serial 00:02: disabled [ 7939.228708] ACPI: Transitioning device [C169] to D3 [ 7939.228709] ACPI: Transitioning device [C169] to D3 [ 7939.228799] ACPI handle has no context! [ 7941.081586] ACPI: PCI interrupt for device 0000:01:00.0 disabled [ 7941.081760] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 7941.081791] ACPI handle has no context! [ 7941.085858] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 7941.086007] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 7941.086096] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 7941.086263] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 7941.086291] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 7941.086319] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 7941.087901] Disabling non-boot CPUs ... [ 7941.088093] swsusp: critical section: [ 7941.121075] swsusp: Need to copy 126867 pages [ 7941.121079] swsusp: Normal pages needed: 113625 + 1024 + 24, available pages: 115651 [ 36.848966] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0C1] -> GSI 10 (level, low) -> IRQ 10 [ 36.848973] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 36.849013] usb usb1: root hub lost power or was reset [ 36.849029] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0C4] -> GSI 10 (level, low) -> IRQ 10 [ 36.849034] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 36.849071] usb usb2: root hub lost power or was reset [ 36.849086] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 36.849091] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 36.849129] usb usb3: root hub lost power or was reset [ 36.864540] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [C0C8] -> GSI 10 (level, low) -> IRQ 10 [ 36.864546] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 36.864586] usb usb4: root hub lost power or was reset [ 36.868459] ehci_hcd 0000:00:1d.7: debug port 1 [ 36.868465] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 36.869460] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20050200, writing 200c0200) [ 36.869476] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 36.869519] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800003, writing 2800007) [ 36.869529] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 36.869535] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 36.873336] ata2.00: _GTF unexpected object type 0x1 [ 36.873339] ata2.01: _GTF evaluation failed (AE 0x1001) [ 36.873478] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900007, writing 2900003) [ 36.873491] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [C0C2] -> GSI 11 (level, low) -> IRQ 11 [ 36.873498] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 36.880515] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out [ 36.880518] ata1.01: ACPI cmd ef/03:22:00:00:00:b0 filtered out [ 36.881162] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 36.881165] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out [ 36.881168] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 36.881171] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 36.881309] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 36.883121] ata1.00: configured for UDMA/100 [ 36.888628] ata1.01: configured for MWDMA2 [ 36.890379] ata1.00: configured for UDMA/100 [ 36.895878] ata1.01: configured for MWDMA2 [ 36.895880] ata1: EH complete [ 36.895915] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 36.895928] sd 0:0:0:0: [sda] Write Protect is off [ 36.895931] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 36.895948] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.895964] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 36.895974] sd 0:0:0:0: [sda] Write Protect is off [ 36.895976] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 36.895990] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.902073] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C2] -> GSI 11 (level, low) -> IRQ 11 [ 36.902080] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 36.923033] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0C1] -> GSI 10 (level, low) -> IRQ 10 [ 37.219111] PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 4010, writing a810) [ 37.219119] PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2900006, writing 2900002) [ 37.219139] PM: Writing back config space on device 0000:02:06.0 at offset f (was 180010a, writing 580010a) [ 37.219156] PM: Writing back config space on device 0000:02:06.0 at offset 3 (was 824000, writing 82a800) [ 37.219175] Yenta O2: res at 0x94/0xD4: ea/00 [ 37.219177] Yenta O2: enabling read prefetch/write burst [ 37.219548] PM: Writing back config space on device 0000:02:06.1 at offset f (was 180010a, writing 580010a) [ 37.219566] PM: Writing back config space on device 0000:02:06.1 at offset 3 (was 824000, writing 82a800) [ 37.219949] PM: Writing back config space on device 0000:02:06.2 at offset 4 (was 0, writing 90280000) [ 37.219956] PM: Writing back config space on device 0000:02:06.2 at offset 1 (was 4100000, writing 4100003) [ 37.219975] PM: Writing back config space on device 0000:02:06.3 at offset f (was 184010a, writing 580010a) [ 37.219992] PM: Writing back config space on device 0000:02:06.3 at offset 3 (was 824000, writing 82a800) [ 37.225987] PM: Writing back config space on device 0000:02:0d.0 at offset f (was 4020100, writing 402010a) [ 37.226002] PM: Writing back config space on device 0000:02:0d.0 at offset 5 (was 0, writing 90100000) [ 37.226006] PM: Writing back config space on device 0000:02:0d.0 at offset 4 (was 0, writing 90380000) [ 37.226011] PM: Writing back config space on device 0000:02:0d.0 at offset 3 (was 0, writing 4010) [ 37.226017] PM: Writing back config space on device 0000:02:0d.0 at offset 1 (was 2100000, writing 2100006) [ 37.275674] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[90380000-903807ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 37.275909] PM: Writing back config space on device 0000:02:0e.0 at offset 1 (was 2b00006, writing 2b00002) [ 37.277978] serial 00:02: activated [ 37.280725] parport_pc 00:05: activated [ 37.280829] tpm_inf_pnp 00:0c: activation failed [ 37.849766] sd 0:0:0:0: [sda] Starting disk [ 43.279821] smsc_ircc_set_sir_speed(), Setting speed to: 9600 [ 43.279843] smsc_ircc_change_speed() changing speed to: 9600 [ 43.279863] smsc_ircc_set_sir_speed(), Setting speed to: 9600 [ 43.279963] PM: Image restored successfully. [ 43.323911] Restarting tasks ... <6>usb 2-1: USB disconnect, address 2 [ 43.371150] done. [ 43.371167] swsusp: Basic memory bitmaps freed [ 43.379594] usb 3-1: USB disconnect, address 2 [ 124.142476] usb 3-1: new full speed USB device using uhci_hcd and address 3 [ 43.987519] tg3.c:v3.86 (November 9, 2007) [ 43.987745] ACPI: PCI Interrupt 0000:02:0e.0[A] -> Link [C0C5] -> GSI 11 (level, low) -> IRQ 11 [ 44.034301] usb 3-1: configuration #1 chosen from 1 choice [ 44.188365] eth0: Tigon3 [partno(BMC5705mA3) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:08:02:e2:cf:a2 [ 44.188376] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 44.188379] eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 44.345873] ath_pci: 0.9.4 [ 44.346206] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C6] -> GSI 11 (level, low) -> IRQ 11 [ 44.970199] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.997874] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 44.997883] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 44.997892] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 44.997896] wifi0: mac 5.6 phy 4.1 radio 1.7 [ 44.997905] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 44.997908] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 44.997910] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 44.997912] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 44.997914] wifi0: Use hw queue 8 for CAB traffic [ 44.997916] wifi0: Use hw queue 9 for beacons [ 45.001856] wifi0: Atheros 5212: mem=0x90080000, irq=11 [ 145.403337] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready [ 166.424620] ath0: no IPv6 routers present [12120.180128] ACPI: PCI interrupt for device 0000:02:04.0 disabled [12120.180169] ath_pci: driver unloaded [34354.910459] ACPI: PCI interrupt for device 0000:02:0e.0 disabled [12122.075843] PM: suspend-to-disk mode set to 'platform' [12122.076353] swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 [12122.076359] swsusp: Basic memory bitmaps created [12122.076361] Syncing filesystems ... done. [12122.081126] Freezing user space processes ... (elapsed 0.00 seconds) done. [12122.082249] Freezing remaining freezable tasks ... (elapsed 0.32 seconds) done. [12122.406560] Shrinking memory... -\|/-\|done (76016 pages freed) [12123.338360] Freed 304064 kbytes in 0.93 seconds (326.95 MB/s) [12123.338363] Suspending console(s) [12123.340619] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12123.340996] ACPI handle has no context! [12123.341991] parport_pc 00:05: disabled [12123.343235] serial 00:02: disabled [12123.343562] ACPI: Transitioning device [C169] to D3 [12123.343564] ACPI: Transitioning device [C169] to D3 [12123.343653] ACPI handle has no context! [12125.165058] ACPI: PCI interrupt for device 0000:01:00.0 disabled [12125.165217] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [12125.165248] ACPI handle has no context! [12125.181209] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [12125.181360] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [12125.181449] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [12125.181698] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [12125.181726] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [12125.181754] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [12125.183238] Disabling non-boot CPUs ... [12125.183429] swsusp: critical section: [12125.217304] swsusp: Need to copy 122023 pages [12125.217308] swsusp: Normal pages needed: 105967 + 1024 + 24, available pages: 123909 [ 34.974655] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0C1] -> GSI 10 (level, low) -> IRQ 10 [ 34.974663] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 34.974702] usb usb1: root hub lost power or was reset [ 34.974718] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0C4] -> GSI 10 (level, low) -> IRQ 10 [ 34.974724] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 34.974761] usb usb2: root hub lost power or was reset [ 34.974813] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 34.974819] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 34.974856] usb usb3: root hub lost power or was reset [ 34.987845] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [C0C8] -> GSI 10 (level, low) -> IRQ 10 [ 34.987851] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 34.987891] usb usb4: root hub lost power or was reset [ 34.991783] ehci_hcd 0000:00:1d.7: debug port 1 [ 34.991788] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 34.992422] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20050200, writing 200c0200) [ 34.992438] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 34.992481] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800003, writing 2800007) [ 34.992491] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 34.992497] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 34.996298] ata2.00: _GTF unexpected object type 0x1 [ 34.996301] ata2.01: _GTF evaluation failed (AE 0x1001) [ 34.996440] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900007, writing 2900003) [ 34.996453] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [C0C2] -> GSI 11 (level, low) -> IRQ 11 [ 34.996460] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 35.003416] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out [ 35.003419] ata1.01: ACPI cmd ef/03:22:00:00:00:b0 filtered out [ 35.004061] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 35.004064] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out [ 35.004067] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 35.004070] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 35.004209] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 35.006022] ata1.00: configured for UDMA/100 [ 35.010644] ata1.01: configured for MWDMA2 [ 35.012396] ata1.00: configured for UDMA/100 [ 35.037239] ata1.01: configured for MWDMA2 [ 35.037242] ata1: EH complete [ 35.037277] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 35.037291] sd 0:0:0:0: [sda] Write Protect is off [ 35.037293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.037310] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.037327] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 35.037336] sd 0:0:0:0: [sda] Write Protect is off [ 35.037338] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.037353] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.044149] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C2] -> GSI 11 (level, low) -> IRQ 11 [ 35.044156] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 35.065087] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0C1] -> GSI 10 (level, low) -> IRQ 10 [ 35.361190] PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 4010, writing a810) [ 35.361199] PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2900006, writing 2900002) [ 35.361219] PM: Writing back config space on device 0000:02:06.0 at offset f (was 180010a, writing 580010a) [ 35.361236] PM: Writing back config space on device 0000:02:06.0 at offset 3 (was 824000, writing 82a800) [ 35.361255] Yenta O2: res at 0x94/0xD4: ea/00 [ 35.361256] Yenta O2: enabling read prefetch/write burst [ 35.361627] PM: Writing back config space on device 0000:02:06.1 at offset f (was 180010a, writing 580010a) [ 35.361644] PM: Writing back config space on device 0000:02:06.1 at offset 3 (was 824000, writing 82a800) [ 35.362028] PM: Writing back config space on device 0000:02:06.2 at offset 4 (was 0, writing 90280000) [ 35.362035] PM: Writing back config space on device 0000:02:06.2 at offset 1 (was 4100000, writing 4100003) [ 35.362054] PM: Writing back config space on device 0000:02:06.3 at offset f (was 184010a, writing 580010a) [ 35.362071] PM: Writing back config space on device 0000:02:06.3 at offset 3 (was 824000, writing 82a800) [ 35.375940] PM: Writing back config space on device 0000:02:0d.0 at offset f (was 4020100, writing 402010a) [ 35.375955] PM: Writing back config space on device 0000:02:0d.0 at offset 5 (was 0, writing 90100000) [ 35.375960] PM: Writing back config space on device 0000:02:0d.0 at offset 4 (was 0, writing 90380000) [ 35.375965] PM: Writing back config space on device 0000:02:0d.0 at offset 3 (was 0, writing 4010) [ 35.375971] PM: Writing back config space on device 0000:02:0d.0 at offset 1 (was 2100000, writing 2100006) [ 35.425617] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[90380000-903807ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 35.425853] PM: Writing back config space on device 0000:02:0e.0 at offset 1 (was 2b00006, writing 2b00002) [ 35.427917] serial 00:02: activated [ 35.430669] parport_pc 00:05: activated [ 35.430775] tpm_inf_pnp 00:0c: activation failed [ 36.019730] sd 0:0:0:0: [sda] Starting disk [ 41.623647] smsc_ircc_set_sir_speed(), Setting speed to: 9600 [ 41.623668] smsc_ircc_change_speed() changing speed to: 9600 [ 41.623688] smsc_ircc_set_sir_speed(), Setting speed to: 9600 [ 41.623791] PM: Image restored successfully. [ 41.667574] Restarting tasks ... done. [ 41.722083] swsusp: Basic memory bitmaps freed [ 41.820461] usb 3-1: USB disconnect, address 3 [ 119.839252] usb 3-1: new full speed USB device using uhci_hcd and address 4 [ 120.179720] usb 3-1: configuration #1 chosen from 1 choice [ 120.775079] usb 2-1: new low speed USB device using uhci_hcd and address 3 [ 120.946574] usb 2-1: configuration #1 chosen from 1 choice [ 120.982340] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input10 [ 121.011569] input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1d.1-1 [ 43.044452] tg3.c:v3.86 (November 9, 2007) [ 43.044478] ACPI: PCI Interrupt 0000:02:0e.0[A] -> Link [C0C5] -> GSI 11 (level, low) -> IRQ 11 [ 43.109987] eth0: Tigon3 [partno(BMC5705mA3) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:08:02:e2:cf:a2 [ 43.109997] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 43.110000] eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 43.371510] ath_pci: 0.9.4 [ 43.371583] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C6] -> GSI 11 (level, low) -> IRQ 11 [ 43.987206] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.063052] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 44.063062] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 44.063071] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 44.063075] wifi0: mac 5.6 phy 4.1 radio 1.7 [ 44.063085] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 44.063087] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 44.063089] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 44.063092] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 44.063094] wifi0: Use hw queue 8 for CAB traffic [ 44.063096] wifi0: Use hw queue 9 for beacons [ 44.067385] wifi0: Atheros 5212: mem=0x90080000, irq=11 [ 143.415456] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready [ 163.106661] ath0: no IPv6 routers present [ 1317.032591] usb 1-1: new full speed USB device using uhci_hcd and address 3 [ 1317.246053] usb 1-1: configuration #1 chosen from 1 choice [ 773.490901] CIFS VFS: No response for cmd 50 mid 6052 [ 1644.541838] CIFS VFS: No response for cmd 50 mid 4587 [ 6991.209842] usb 1-1: USB disconnect, address 3 [ 7006.976656] usb 2-1: USB disconnect, address 3 [ 2988.484257] audit(1209550134.552:3): type=1503 operation="inode_permission" requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=9124 profile="/usr/sbin/cupsd" namespace="default" [ 2988.640018] audit(1209550134.852:4): type=1503 operation="capable" name="dac_override" pid=9116 profile="/usr/lib/cups/backend/cups-pdf" namespace="default" [ 2988.640031] audit(1209550134.852:5): type=1503 operation="capable" name="dac_read_search" pid=9116 profile="/usr/lib/cups/backend/cups-pdf" namespace="default" [ 3007.389218] audit(1209550172.868:6): type=1503 operation="inode_permission" requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=9189 profile="/usr/sbin/cupsd" namespace="default" [ 3007.393007] audit(1209550172.872:7): type=1503 operation="inode_permission" requested_mask="::r" denied_mask="::r" name="/var/run/samba/gencache.tdb" pid=9181 profile="/usr/sbin/cupsd" namespace="default" [ 3078.709831] audit(1209550358.976:8): type=1503 operation="inode_permission" requested_mask="::r" denied_mask="::r" name="/var/run/samba/gencache.tdb" pid=9338 profile="/usr/sbin/cupsd" namespace="default" [ 3078.776240] audit(1209550359.040:9): type=1503 operation="inode_permission" requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=9346 profile="/usr/sbin/cupsd" namespace="default" [ 3320.643498] usb 2-1: new low speed USB device using uhci_hcd and address 4 [ 4706.303649] usb 2-1: configuration #1 chosen from 1 choice [ 5646.491862] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input11 [ 5646.517616] input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1d.1-1 [ 6237.611531] audit(1209558986.004:10): type=1503 operation="inode_permission" requested_mask="::r" denied_mask="::r" name="/var/run/samba/gencache.tdb" pid=15500 profile="/usr/sbin/cupsd" namespace="default" [ 6237.687076] audit(1209558986.080:11): type=1503 operation="inode_permission" requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=15508 profile="/usr/sbin/cupsd" namespace="default" [ 6252.868608] audit(1209559021.984:12): type=1503 operation="inode_permission" requested_mask="::r" denied_mask="::r" name="/var/run/samba/gencache.tdb" pid=15563 profile="/usr/sbin/cupsd" namespace="default" [ 6252.942855] audit(1209559022.060:13): type=1503 operation="inode_permission" requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=15571 profile="/usr/sbin/cupsd" namespace="default" [ 6265.538468] audit(1209559049.016:14): type=1503 operation="inode_permission" requested_mask="::r" denied_mask="::r" name="/var/run/samba/gencache.tdb" pid=15605 profile="/usr/sbin/cupsd" namespace="default" [ 6265.589581] audit(1209559049.068:15): type=1503 operation="inode_permission" requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=15613 profile="/usr/sbin/cupsd" namespace="default" [ 6299.856310] audit(1209559135.784:16): type=1503 operation="inode_permission" requested_mask="::r" denied_mask="::r" name="/var/run/samba/gencache.tdb" pid=15682 profile="/usr/sbin/cupsd" namespace="default" [ 6299.908540] audit(1209559135.836:17): type=1503 operation="inode_permission" requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=15690 profile="/usr/sbin/cupsd" namespace="default" [ 6321.726735] audit(1209559192.056:18): type=1503 operation="inode_permission" requested_mask="::r" denied_mask="::r" name="/var/run/samba/gencache.tdb" pid=15747 profile="/usr/sbin/cupsd" namespace="default" [ 6321.783079] audit(1209559192.112:19): type=1503 operation="inode_permission" requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=15755 profile="/usr/sbin/cupsd" namespace="default" [ 6364.153911] audit(1209559300.916:20): type=1503 operation="inode_permission" requested_mask="::r" denied_mask="::r" name="/var/run/samba/gencache.tdb" pid=15854 profile="/usr/sbin/cupsd" namespace="default" [ 6364.246842] audit(1209559301.008:21): type=1503 operation="inode_permission" requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=15862 profile="/usr/sbin/cupsd" namespace="default" [ 6450.654372] audit(1209559502.796:22): type=1503 operation="inode_permission" requested_mask="::r" denied_mask="::r" name="/var/run/samba/gencache.tdb" pid=16034 profile="/usr/sbin/cupsd" namespace="default" [ 6450.715652] audit(1209559502.860:23): type=1503 operation="inode_permission" requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=16042 profile="/usr/sbin/cupsd" namespace="default" [18910.175151] usb 1-1: new full speed USB device using uhci_hcd and address 4 [18910.388525] usb 1-1: configuration #1 chosen from 1 choice [ 8690.720509] audit(1209565295.008:24): type=1503 operation="inode_permission" requested_mask="::r" denied_mask="::r" name="/var/run/samba/gencache.tdb" pid=19876 profile="/usr/sbin/cupsd" namespace="default" [ 8690.825334] audit(1209565295.112:25): type=1503 operation="inode_permission" requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=19884 profile="/usr/sbin/cupsd" namespace="default" [34448.818078] usb 1-1: USB disconnect, address 4 [34448.880922] ADDRCONF(NETDEV_UP): ath0: link is not ready [34449.683548] ACPI: PCI interrupt for device 0000:02:04.0 disabled [34449.683616] ath_pci: driver unloaded [34450.809258] ACPI: PCI interrupt for device 0000:02:0e.0 disabled [12156.435294] PM: suspend-to-disk mode set to 'platform' [12156.435807] swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 [12156.435813] swsusp: Basic memory bitmaps created [12156.435815] Syncing filesystems ... done. [12156.440761] Freezing user space processes ... (elapsed 0.01 seconds) done. [12156.457551] Freezing remaining freezable tasks ... (elapsed 2.69 seconds) done. [12159.147261] Shrinking memory... -\|/-done (62571 pages freed) [12159.787795] Freed 250284 kbytes in 0.64 seconds (391.06 MB/s) [12159.787799] Suspending console(s) [12159.793697] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12159.794093] ACPI handle has no context! [12159.795140] parport_pc 00:05: disabled [12159.796559] serial 00:02: disabled [12159.796891] ACPI: Transitioning device [C169] to D3 [12159.796893] ACPI: Transitioning device [C169] to D3 [12159.796982] ACPI handle has no context! [12161.637707] ACPI: PCI interrupt for device 0000:01:00.0 disabled [12161.637890] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [12161.637921] ACPI handle has no context! [12161.653944] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [12161.654089] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [12161.654178] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [12161.654338] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [12161.654366] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [12161.654393] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [12161.655953] Disabling non-boot CPUs ... [12161.656145] swsusp: critical section: [12161.692486] swsusp: Need to copy 124533 pages [12161.692491] swsusp: Normal pages needed: 109854 + 1024 + 24, available pages: 119423 [ 23.461359] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0C1] -> GSI 10 (level, low) -> IRQ 10 [ 23.461367] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 23.461406] usb usb1: root hub lost power or was reset [ 23.461422] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0C4] -> GSI 10 (level, low) -> IRQ 10 [ 23.461427] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 23.461464] usb usb2: root hub lost power or was reset [ 23.461479] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 23.461484] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 23.461522] usb usb3: root hub lost power or was reset [ 23.477333] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [C0C8] -> GSI 10 (level, low) -> IRQ 10 [ 23.477339] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 23.477379] usb usb4: root hub lost power or was reset [ 23.481271] ehci_hcd 0000:00:1d.7: debug port 1 [ 23.481277] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 23.482167] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20050200, writing 200c0200) [ 23.482183] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 23.482226] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800003, writing 2800007) [ 23.482236] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 23.482242] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 23.486053] ata2.00: _GTF unexpected object type 0x1 [ 23.486056] ata2.01: _GTF evaluation failed (AE 0x1001) [ 23.486195] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900007, writing 2900003) [ 23.486209] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [C0C2] -> GSI 11 (level, low) -> IRQ 11 [ 23.486215] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 23.512645] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out [ 23.512648] ata1.01: ACPI cmd ef/03:22:00:00:00:b0 filtered out [ 23.513292] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 23.513295] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out [ 23.513297] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 23.513300] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 23.513439] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 23.515247] ata1.00: configured for UDMA/100 [ 23.520737] ata1.01: configured for MWDMA2 [ 23.522487] ata1.00: configured for UDMA/100 [ 23.527983] ata1.01: configured for MWDMA2 [ 23.527986] ata1: EH complete [ 23.528021] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 23.528034] sd 0:0:0:0: [sda] Write Protect is off [ 23.528036] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.528054] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.528070] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 23.528079] sd 0:0:0:0: [sda] Write Protect is off [ 23.528082] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.528096] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.533846] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C2] -> GSI 11 (level, low) -> IRQ 11 [ 23.533853] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 23.554784] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0C1] -> GSI 10 (level, low) -> IRQ 10 [ 23.851050] PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 4010, writing a810) [ 23.851059] PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2900006, writing 2900002) [ 23.851079] PM: Writing back config space on device 0000:02:06.0 at offset f (was 180010a, writing 580010a) [ 23.851096] PM: Writing back config space on device 0000:02:06.0 at offset 3 (was 824000, writing 82a800) [ 23.851115] Yenta O2: res at 0x94/0xD4: ea/00 [ 23.851117] Yenta O2: enabling read prefetch/write burst [ 23.851488] PM: Writing back config space on device 0000:02:06.1 at offset f (was 180010a, writing 580010a) [ 23.851505] PM: Writing back config space on device 0000:02:06.1 at offset 3 (was 824000, writing 82a800) [ 23.851889] PM: Writing back config space on device 0000:02:06.2 at offset 4 (was 0, writing 90280000) [ 23.851896] PM: Writing back config space on device 0000:02:06.2 at offset 1 (was 4100000, writing 4100003) [ 23.851915] PM: Writing back config space on device 0000:02:06.3 at offset f (was 184010a, writing 580010a) [ 23.851932] PM: Writing back config space on device 0000:02:06.3 at offset 3 (was 824000, writing 82a800) [ 23.865658] PM: Writing back config space on device 0000:02:0d.0 at offset f (was 4020100, writing 402010a) [ 23.865673] PM: Writing back config space on device 0000:02:0d.0 at offset 5 (was 0, writing 90100000) [ 23.865678] PM: Writing back config space on device 0000:02:0d.0 at offset 4 (was 0, writing 90380000) [ 23.865683] PM: Writing back config space on device 0000:02:0d.0 at offset 3 (was 0, writing 4010) [ 23.865689] PM: Writing back config space on device 0000:02:0d.0 at offset 1 (was 2100000, writing 2100006) [ 23.915342] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[90380000-903807ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 23.915579] PM: Writing back config space on device 0000:02:0e.0 at offset 1 (was 2b00006, writing 2b00002) [ 23.917670] serial 00:02: activated [ 23.920456] parport_pc 00:05: activated [ 23.920562] tpm_inf_pnp 00:0c: activation failed [ 24.490800] sd 0:0:0:0: [sda] Starting disk [ 30.032801] smsc_ircc_set_sir_speed(), Setting speed to: 9600 [ 30.032822] smsc_ircc_change_speed() changing speed to: 9600 [ 30.032842] smsc_ircc_set_sir_speed(), Setting speed to: 9600 [ 30.032946] PM: Image restored successfully. [ 30.078389] Restarting tasks ... <6>usb 2-1: USB disconnect, address 4 [ 30.123948] usb 3-1: USB disconnect, address 4 [ 30.126122] done. [ 30.126133] swsusp: Basic memory bitmaps freed [ 30.615329] usb 3-1: new full speed USB device using uhci_hcd and address 5 [ 30.955574] usb 3-1: configuration #1 chosen from 1 choice [ 31.848945] tg3.c:v3.86 (November 9, 2007) [ 31.848971] ACPI: PCI Interrupt 0000:02:0e.0[A] -> Link [C0C5] -> GSI 11 (level, low) -> IRQ 11 [ 31.991143] eth0: Tigon3 [partno(BMC5705mA3) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:08:02:e2:cf:a2 [ 31.991153] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 31.991156] eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 32.423899] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.586960] ath_pci: 0.9.4 [ 32.587032] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C6] -> GSI 11 (level, low) -> IRQ 11 [ 32.963212] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 32.963222] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 32.963232] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 32.963236] wifi0: mac 5.6 phy 4.1 radio 1.7 [ 32.963245] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 32.963247] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 32.963250] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 32.963252] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 32.963254] wifi0: Use hw queue 8 for CAB traffic [ 32.963256] wifi0: Use hw queue 9 for beacons [ 32.971401] wifi0: Atheros 5212: mem=0x90080000, irq=11 [ 112.670255] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready [ 135.615795] ath0: no IPv6 routers present [55749.969467] pidgin[6790]: segfault at b7fb78c0 eip b7fb78c0 esp bf91ca6c error 4 [55812.569515] usb 1-2: new full speed USB device using uhci_hcd and address 5 [55812.782966] usb 1-2: configuration #1 chosen from 1 choice [56131.047606] usb 1-2: USB disconnect, address 5 [267740.465048] atieventsd[5876]: segfault at 00000548 eip b7e835c0 esp bffc5d00 error 4