[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic) [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [17179569.184000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [17179569.184000] BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved) [17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [17179569.184000] 127MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] found SMP MP-table at 000f5450 [17179569.184000] On node 0 totalpages: 262128 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 32752 pages, LIFO batch:7 [17179569.184000] DMI 2.2 present. [17179569.184000] ACPI: RSDP (v000 Nvidia ) @ 0x000f8f80 [17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 [17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 [17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7b40 [17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x4008 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [17179569.184000] Processor #0 15:12 APIC version 16 [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored. [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [17179569.184000] ACPI: IRQ9 used by override. [17179569.184000] ACPI: IRQ14 used by override. [17179569.184000] ACPI: IRQ15 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Enabling fast FPU save and restore... done. [17179569.184000] Enabling unmasked SIMD FPU exception support... done. [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes) [17179569.184000] Detected 2020.287 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour VGA+ 80x25 [17179571.116000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179571.116000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [17179571.136000] Memory: 1029508k/1048512k available (1910k kernel code, 18284k reserved, 1070k data, 308k init, 131008k highmem) [17179571.136000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179571.216000] Calibrating delay using timer specific routine.. 4044.74 BogoMIPS (lpj=8089492) [17179571.216000] Security Framework v1.0.0 initialized [17179571.216000] SELinux: Disabled at boot. [17179571.216000] Mount-cache hash table entries: 512 [17179571.216000] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 [17179571.216000] CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 [17179571.216000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [17179571.216000] CPU: L2 Cache: 512K (64 bytes/line) [17179571.216000] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000 [17179571.216000] Checking 'hlt' instruction... OK. [17179571.232000] SMP alternatives: switching to UP code [17179571.232000] Freeing SMP alternatives: 16k freed [17179571.232000] checking if image is initramfs... it is [17179571.680000] Freeing initrd memory: 5513k freed [17179571.680000] ACPI: Core revision 20060707 [17179571.688000] ACPI: Looking for DSDT ... not found! [17179571.700000] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00 [17179571.700000] Total of 1 processors activated (4044.74 BogoMIPS). [17179571.700000] ENABLING IO-APIC IRQs [17179571.700000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [17179571.848000] Brought up 1 CPUs [17179571.848000] migration_cost=0 [17179571.848000] NET: Registered protocol family 16 [17179571.848000] EISA bus registered [17179571.848000] ACPI: bus type pci registered [17179571.860000] PCI: PCI BIOS revision 2.10 entry at 0xfb830, last bus=2 [17179571.860000] PCI: Using configuration type 1 [17179571.860000] Setting up standard PCI resources [17179571.872000] ACPI: Interpreter enabled [17179571.872000] ACPI: Using IOAPIC for interrupt routing [17179571.872000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179571.872000] PCI: Probing PCI hardware (bus 00) [17179571.876000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:08.0 [17179571.876000] Boot video device is 0000:01:00.0 [17179571.876000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179571.928000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [17179571.928000] ACPI: Power Resource [ISAV] (on) [17179571.928000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [17179571.928000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15) [17179571.928000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [17179571.932000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 *10 11 12 14 15) [17179571.932000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [17179571.932000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 *11 12 14 15) [17179571.932000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [17179571.932000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [17179571.932000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [17179571.932000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [17179571.932000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15) [17179571.932000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [17179571.932000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [17179571.932000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15) [17179571.932000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [17179571.932000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [17179571.936000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [17179571.936000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [17179571.936000] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15) [17179571.936000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [17179571.936000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [17179571.936000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. [17179571.936000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. [17179571.936000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [17179571.936000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. [17179571.936000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. [17179571.936000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. [17179571.936000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. [17179571.936000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. [17179571.936000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [17179571.940000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. [17179571.940000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. [17179571.940000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [17179571.940000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [17179571.940000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [17179571.940000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled. [17179571.940000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled. [17179571.944000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179571.944000] pnp: PnP ACPI init [17179571.948000] pnp: PnP ACPI: found 14 devices [17179571.948000] PnPBIOS: Disabled by ACPI PNP [17179571.948000] PCI: Using ACPI for IRQ routing [17179571.948000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179571.984000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved [17179571.984000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved [17179571.984000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved [17179571.984000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved [17179571.984000] pnp: 00:00: ioport range 0x4800-0x487f has been reserved [17179571.984000] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved [17179571.984000] PCI: Bridge: 0000:00:0b.0 [17179571.984000] IO window: c000-cfff [17179571.984000] MEM window: ec000000-ecffffff [17179571.984000] PREFETCH window: d8000000-e7ffffff [17179571.984000] PCI: Bridge: 0000:00:0e.0 [17179571.984000] IO window: d000-dfff [17179571.984000] MEM window: ed000000-edffffff [17179571.984000] PREFETCH window: disabled. [17179571.984000] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [17179571.984000] NET: Registered protocol family 2 [17179572.024000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [17179572.024000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [17179572.024000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [17179572.024000] TCP: Hash tables configured (established 131072 bind 65536) [17179572.024000] TCP reno registered [17179572.024000] audit: initializing netlink socket (disabled) [17179572.024000] audit(1161030563.024:1): initialized [17179572.024000] highmem bounce pool size: 64 pages [17179572.024000] VFS: Disk quotas dquot_6.5.1 [17179572.024000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179572.024000] Initializing Cryptographic API [17179572.024000] io scheduler noop registered [17179572.024000] io scheduler anticipatory registered [17179572.024000] io scheduler deadline registered [17179572.024000] io scheduler cfq registered (default) [17179572.024000] isapnp: Scanning for PnP cards... [17179572.380000] isapnp: No Plug & Play device found [17179572.396000] Real Time Clock Driver v1.12ac [17179572.396000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [17179572.396000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [17179572.396000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [17179572.396000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [17179572.396000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [17179572.396000] mice: PS/2 mouse device common for all mice [17179572.396000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize [17179572.396000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179572.396000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179572.396000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [17179572.400000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179572.400000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179572.400000] EISA: Probing bus 0 at eisa.0 [17179572.400000] Cannot allocate resource for EISA slot 4 [17179572.400000] EISA: Detected 0 cards. [17179572.400000] TCP bic registered [17179572.400000] NET: Registered protocol family 1 [17179572.400000] NET: Registered protocol family 8 [17179572.400000] NET: Registered protocol family 20 [17179572.400000] Using IPI No-Shortcut mode [17179572.400000] ACPI: (supports S0 S1 S4 S5) [17179572.400000] Freeing unused kernel memory: 308k freed [17179572.424000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179573.584000] Capability LSM initialized [17179573.612000] ACPI: Fan [FAN] (on) [17179573.616000] ACPI: Thermal Zone [THRM] (0 C) [17179573.988000] SCSI subsystem initialized [17179573.988000] libata version 1.20 loaded. [17179573.992000] sata_nv 0000:00:0a.0: version 0.8 [17179573.992000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [17179573.992000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 177 [17179573.992000] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [17179573.992000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xEA00 irq 177 [17179573.992000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xEA08 irq 177 [17179574.196000] ata1: SATA link up 1.5 Gbps (SStatus 113) [17179574.488000] ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f [17179574.488000] ata1: dev 0 ATA-6, max UDMA/133, 390721968 sectors: LBA48 [17179574.488000] nv_sata: Primary device added [17179574.488000] nv_sata: Primary device removed [17179574.488000] nv_sata: Secondary device removed [17179574.500000] ata1: dev 0 configured for UDMA/133 [17179574.500000] scsi0 : sata_nv [17179574.704000] ata2: SATA link down (SStatus 0) [17179574.704000] scsi1 : sata_nv [17179574.708000] Vendor: ATA Model: ST3200822AS Rev: 3.01 [17179574.708000] Type: Direct-Access ANSI SCSI revision: 05 [17179574.708000] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 [17179574.708000] NFORCE3-250: chipset revision 162 [17179574.708000] NFORCE3-250: not 100% native mode: will probe irqs later [17179574.708000] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller [17179574.708000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [17179574.708000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [17179574.708000] Probing IDE interface ide0... [17179574.724000] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) [17179574.724000] sda: Write Protect is off [17179574.724000] sda: Mode Sense: 00 3a 00 00 [17179574.724000] SCSI device sda: drive cache: write back [17179574.724000] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) [17179574.724000] sda: Write Protect is off [17179574.724000] sda: Mode Sense: 00 3a 00 00 [17179574.724000] SCSI device sda: drive cache: write back [17179574.724000] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [17179574.788000] sd 0:0:0:0: Attached scsi disk sda [17179575.448000] hda: ATAPI-CD ROM-DRIVE-52MAX, ATAPI CD/DVD-ROM drive [17179575.904000] hdb: SONY DVD RW DRU-700A, ATAPI CD/DVD-ROM drive [17179575.964000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179575.968000] Probing IDE interface ide1... [17179576.552000] hda: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) [17179576.552000] Uniform CD-ROM driver Revision: 3.20 [17179576.564000] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [17179576.688000] sata_promise 0000:02:0b.0: version 1.04 [17179576.688000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [17179576.688000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 185 [17179576.688000] sata_promise PATA port found [17179576.708000] ata3: SATA max UDMA/133 cmd 0xF8830200 ctl 0xF8830238 bmdma 0x0 irq 185 [17179576.708000] ata4: SATA max UDMA/133 cmd 0xF8830280 ctl 0xF88302B8 bmdma 0x0 irq 185 [17179576.708000] ata5: SATA max UDMA/133 cmd 0xF8830300 ctl 0xF8830338 bmdma 0x0 irq 185 [17179576.912000] ata3: SATA link down (SStatus 0) [17179576.912000] scsi2 : sata_promise [17179577.120000] ata4: SATA link down (SStatus 0) [17179577.120000] scsi3 : sata_promise [17179577.124000] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000008 [17179577.124000] printing eip: [17179577.124000] f88aa682 [17179577.124000] *pde = 00000000 [17179577.124000] Oops: 0002 [#1] [17179577.124000] SMP [17179577.124000] Modules linked in: sata_promise ide_cd cdrom generic sd_mod amd74xx sata_nv libata scsi_mod thermal processor fan fbcon tileblit font bitblit softcursor vesafb capability commoncap [17179577.124000] CPU: 0 [17179577.124000] EIP: 0060:[] Not tainted VLI [17179577.124000] EFLAGS: 00010202 (2.6.17-10-generic #2) [17179577.124000] EIP is at pdc_sata_scr_write+0x12/0x20 [sata_promise] [17179577.124000] eax: 00000008 ebx: c199b2c0 ecx: 00000300 edx: 00000002 [17179577.124000] esi: c199b2c0 edi: fffee7ab ebp: c199bb78 esp: c1a45d98 [17179577.124000] ds: 007b es: 007b ss: 0068 [17179577.124000] Process modprobe (pid: 1779, threadinfo=c1a44000 task=df9ff030) [17179577.124000] Stack: f88aaf80 f886915c c199b2c0 c199b2c0 00000002 f8869238 00000000 f886b7de [17179577.124000] f887007f dfc83fc0 00000053 f8870100 f8830300 f8830338 00000000 000000b9 [17179577.124000] dfc43c00 dfc83fc0 00000000 dffa3448 00000000 00000003 00000002 00000000 [17179577.124000] Call Trace: [17179577.124000] __sata_phy_reset+0x2c/0x100 [libata] sata_phy_reset+0x8/0x20 [libata] [17179577.124000] ata_device_add+0x57e/0x630 [libata] pdc_ata_init_one+0x2b7/0x3e0 [sata_promise] [17179577.124000] pci_device_probe+0x56/0x80 driver_probe_device+0x44/0xc0 [17179577.124000] __cond_resched+0x17/0x30 __driver_attach+0x82/0x90 [17179577.124000] bus_for_each_dev+0x3b/0x60 driver_attach+0x16/0x20 [17179577.124000] __driver_attach+0x0/0x90 bus_add_driver+0x8c/0x140 [17179577.124000] driver_register+0x41/0xa0 __pci_register_driver+0x47/0x70 [17179577.124000] sys_init_module+0x148/0x19c0 ata_port_start+0x0/0x80 [libata] [17179577.124000] syscall_call+0x7/0xb [17179577.124000] Code: 00 f3 c3 8d b6 00 00 00 00 8b 80 a4 01 00 00 8b 40 0c 8b 40 40 c3 8d 76 00 83 fa 02 53 89 c3 77 0c 8d 04 95 00 00 00 00 03 43 60 <89> 08 5b c3 8d 76 00 8d bc 27 00 00 00 00 83 ec 24 89 74 24 18 [17179577.124000] EIP: [] pdc_sata_scr_write+0x12/0x20 [sata_promise] SS:ESP 0068:c1a45d98 [17179577.124000] <7>Probing IDE interface ide1... [17179577.172000] usbcore: registered new driver usbfs [17179577.172000] usbcore: registered new driver hub [17179577.172000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [17179577.172000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [17179577.172000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 193 [17179577.172000] PCI: Setting latency timer of device 0000:00:02.0 to 64 [17179577.172000] ohci_hcd 0000:00:02.0: OHCI Host Controller [17179577.176000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [17179577.176000] ohci_hcd 0000:00:02.0: irq 193, io mem 0xee003000 [17179577.228000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54. [17179577.236000] usb usb1: configuration #1 chosen from 1 choice [17179577.236000] hub 1-0:1.0: USB hub found [17179577.236000] hub 1-0:1.0: 4 ports detected [17179577.344000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [17179577.344000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 201 [17179577.344000] PCI: Setting latency timer of device 0000:00:02.1 to 64 [17179577.344000] ohci_hcd 0000:00:02.1: OHCI Host Controller [17179577.344000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [17179577.344000] ohci_hcd 0000:00:02.1: irq 201, io mem 0xee004000 [17179577.404000] usb usb2: configuration #1 chosen from 1 choice [17179577.404000] hub 2-0:1.0: USB hub found [17179577.404000] hub 2-0:1.0: 4 ports detected [17179760.932000] hda: command error: status=0x51 { DriveReady SeekComplete Error } [17179760.932000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [17179760.932000] ide: failed opcode was: unknown [17179760.932000] end_request: I/O error, dev hda, sector 1421112 [17179760.932000] Buffer I/O error on device hda, logical block 355278 [17179764.012000] hda: command error: status=0x51 { DriveReady SeekComplete Error } [17179764.012000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [17179764.012000] ide: failed opcode was: unknown [17179764.012000] end_request: I/O error, dev hda, sector 1421112 [17179764.012000] Buffer I/O error on device hda, logical block 355278 [17179767.092000] hda: command error: status=0x51 { DriveReady SeekComplete Error } [17179767.092000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [17179767.092000] ide: failed opcode was: unknown [17179767.092000] end_request: I/O error, dev hda, sector 1421112 [17179767.092000] Buffer I/O error on device hda, logical block 355278 [17179770.356000] hda: command error: status=0x51 { DriveReady SeekComplete Error } [17179770.356000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [17179770.356000] ide: failed opcode was: unknown [17179770.356000] end_request: I/O error, dev hda, sector 1421112 [17179770.356000] Buffer I/O error on device hda, logical block 355278 [17179773.428000] hda: command error: status=0x51 { DriveReady SeekComplete Error } [17179773.428000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [17179773.428000] ide: failed opcode was: unknown [17179773.428000] end_request: I/O error, dev hda, sector 1421112 [17179773.428000] Buffer I/O error on device hda, logical block 355278 [17179776.508000] hda: command error: status=0x51 { DriveReady SeekComplete Error } [17179776.508000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [17179776.508000] ide: failed opcode was: unknown [17179776.508000] end_request: I/O error, dev hda, sector 1421112 [17179776.508000] Buffer I/O error on device hda, logical block 355278 [17179778.516000] hda: command error: status=0x51 { DriveReady SeekComplete Error } [17179778.516000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [17179778.516000] ide: failed opcode was: unknown [17179778.516000] end_request: I/O error, dev hda, sector 1421104 [17179778.516000] Buffer I/O error on device hda, logical block 355276 [17179780.396000] hda: command error: status=0x51 { DriveReady SeekComplete Error } [17179780.396000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [17179780.396000] ide: failed opcode was: unknown [17179780.396000] end_request: I/O error, dev hda, sector 1421108 [17179780.396000] Buffer I/O error on device hda, logical block 355277 [17179782.272000] hda: command error: status=0x51 { DriveReady SeekComplete Error } [17179782.272000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [17179782.272000] ide: failed opcode was: unknown [17179782.272000] end_request: I/O error, dev hda, sector 1421104 [17179782.272000] Buffer I/O error on device hda, logical block 355276 [17179784.152000] hda: command error: status=0x51 { DriveReady SeekComplete Error } [17179784.152000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [17179784.152000] ide: failed opcode was: unknown [17179784.152000] end_request: I/O error, dev hda, sector 1421108 [17179784.152000] Buffer I/O error on device hda, logical block 355277 [17179787.244000] hda: command error: status=0x51 { DriveReady SeekComplete Error } [17179787.244000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [17179787.244000] ide: failed opcode was: unknown [17179787.244000] end_request: I/O error, dev hda, sector 1421112 [17179787.244000] Buffer I/O error on device hda, logical block 355278 [17179790.324000] hda: command error: status=0x51 { DriveReady SeekComplete Error } [17179790.324000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [17179790.324000] ide: failed opcode was: unknown [17179790.324000] end_request: I/O error, dev hda, sector 1421112 [17179790.324000] Buffer I/O error on device hda, logical block 355278 [17179790.844000] ISO 9660 Extensions: Microsoft Joliet Level 3 [17179790.948000] ISO 9660 Extensions: RRIP_1991A [17179791.016000] Registering unionfs 1.1.4 [17179791.024000] loop: loaded (max 8 devices) [17179791.292000] squashfs: version 3.0 (2006/03/15) Phillip Lougher [17179830.712000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [17179843.208000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179843.708000] Linux agpgart interface v0.101 (c) Dave Jones [17179843.836000] input: PC Speaker as /class/input/input1 [17179844.572000] Floppy drive(s): fd0 is 1.44M [17179844.592000] FDC 0 is a post-1991 82077 [17179845.340000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 [17179845.796000] parport: PnPBIOS parport detected. [17179845.796000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [17179846.176000] ts: Compaq touchscreen protocol output [17179846.852000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [17180023.600000] 8139too Fast Ethernet driver 0.9.27 [17180036.996000] NET: Registered protocol family 17 [17180044.956000] ACPI: Power Button (FF) [PWRF] [17180044.956000] ACPI: Power Button (CM) [PWRB] [17180045.072000] ibm_acpi: ec object not found [17180045.120000] pcc_acpi: loading... [17180046.248000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2) [17180046.248000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV) [17180046.248000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV) [17180046.248000] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) [17180046.248000] cpu_init done, current fid 0xc, vid 0x2 [17180050.484000] lp0: using parport0 (interrupt-driven). [17180050.728000] ppdev: user-space parallel port driver [17180057.896000] [drm] Initialized drm 1.0.1 20051102 [17180058.048000] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [17180058.052000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 209 [17180058.052000] [drm] Initialized radeon 1.25.0 20060524 on minor 0 [17180059.776000] [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held [17180059.780000] [drm:drm_unlock] *ERROR* Process 5582 using kernel context 0 [17180071.960000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [17180071.960000] apm: overridden by ACPI. [17180103.936000] Bluetooth: Core ver 2.8 [17180103.936000] NET: Registered protocol family 31 [17180103.936000] Bluetooth: HCI device and connection manager initialized [17180103.936000] Bluetooth: HCI socket layer initialized [17180104.572000] Bluetooth: L2CAP ver 2.8 [17180104.572000] Bluetooth: L2CAP socket layer initialized [17180104.904000] Bluetooth: RFCOMM socket layer initialized [17180104.904000] Bluetooth: RFCOMM TTY layer initialized [17180104.904000] Bluetooth: RFCOMM ver 1.7 [17180216.248000] NET: Registered protocol family 10 [17180216.248000] lo: Disabled Privacy Extensions [17180216.248000] IPv6 over IPv4 tunneling driver [17180280.984000] ohci_hcd 0000:00:02.1: wakeup [17180281.368000] usb 2-1: new full speed USB device using ohci_hcd and address 2 [17180281.584000] usb 2-1: configuration #1 chosen from 2 choices [17180282.260000] usbcore: registered new driver libusual [17180282.364000] Initializing USB Mass Storage driver... [17180282.364000] scsi5 : SCSI emulation for USB Mass Storage devices [17180282.364000] usb-storage: device found at 2 [17180282.364000] usb-storage: waiting for device to settle before scanning [17180282.364000] usbcore: registered new driver usb-storage [17180282.364000] USB Mass Storage support registered. [17180287.368000] usb-storage: device scan complete [17180287.372000] Vendor: Apple Model: iPod Rev: 1.62 [17180287.372000] Type: Direct-Access ANSI SCSI revision: 00 [17180287.384000] SCSI device sdb: 7999487 512-byte hdwr sectors (4096 MB) [17180287.396000] sdb: Write Protect is off [17180287.396000] sdb: Mode Sense: 68 00 00 08 [17180287.396000] sdb: assuming drive cache: write through [17180287.416000] SCSI device sdb: 7999487 512-byte hdwr sectors (4096 MB) [17180287.428000] sdb: Write Protect is off [17180287.428000] sdb: Mode Sense: 68 00 00 08 [17180287.428000] sdb: assuming drive cache: write through [17180287.428000] sdb: sdb1 sdb2 [17180287.448000] sd 5:0:0:0: Attached scsi removable disk sdb [17180287.448000] sd 5:0:0:0: Attached scsi generic sg1 type 0 [17180295.792000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!