[ 0.000000] Bootdata ok (command line is root=/dev/sda1 ro) [ 0.000000] Linux version 2.6.17-10-generic (root@yellow) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu4)) #2 SMP Wed Oct 4 16:06:36 UTC 2006 (Ubuntu 2.6.17-10.27-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fed3400 (usable) [ 0.000000] BIOS-e820: 000000003fed3400 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x00000000000fc1b0 [ 0.000000] ACPI: RSDT (v001 DELL M07 0x27d6071d ASL 0x00000061) @ 0x000000003fed39cd [ 0.000000] ACPI: FADT (v001 DELL M07 0x27d6071d ASL 0x00000061) @ 0x000000003fed4800 [ 0.000000] ACPI: MADT (v001 DELL M07 0x27d6071d ASL 0x00000047) @ 0x000000003fed5000 [ 0.000000] ACPI: MCFG (v016 DELL M07 0x27d6071d ASL 0x00000061) @ 0x000000003fed4fc0 [ 0.000000] ACPI: BOOT (v001 DELL M07 0x27d6071d ASL 0x00000061) @ 0x000000003fed4bc0 [ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x000000003fed3a05 [ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x0000000000000000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fed3000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fed3000 [ 0.000000] No mptable found. [ 0.000000] On node 0 totalpages: 256818 [ 0.000000] DMA zone: 2594 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 254224 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Checking aperture... [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/sda1 ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 0.000000] time.c: Detected 1997.379 MHz processor. [ 13.372240] Console: colour VGA+ 80x25 [ 13.376735] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 13.377322] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 13.389987] Memory: 1019612k/1047372k available (2129k kernel code, 27372k reserved, 1424k data, 188k init) [ 13.468685] Calibrating delay using timer specific routine.. 3999.25 BogoMIPS (lpj=7998519) [ 13.468929] Security Framework v1.0.0 initialized [ 13.469029] SELinux: Disabled at boot. [ 13.469144] Mount-cache hash table entries: 256 [ 13.469394] CPU: L1 I cache: 32K, L1 D cache: 32K [ 13.469570] CPU: L2 cache: 4096K [ 13.469665] using mwait in idle threads. [ 13.469759] CPU: Physical Processor ID: 0 [ 13.469854] CPU: Processor Core ID: 0 [ 13.469953] CPU0: Thermal monitoring enabled (TM2) [ 13.470058] SMP alternatives: switching to UP code [ 13.470411] checking if image is initramfs... it is [ 13.992304] Freeing initrd memory: 5956k freed [ 13.997015] ACPI: Core revision 20060707 [ 14.013533] ACPI: Looking for DSDT ... not found! [ 14.056685] activating NMI Watchdog ... done. [ 14.056870] Using local APIC timer interrupts. [ 14.106965] result 10403006 [ 14.107057] Detected 10.403 MHz APIC timer. [ 14.108067] SMP alternatives: switching to SMP code [ 14.108309] Booting processor 1/2 APIC 0x1 [ 15.958091] Initializing CPU#1 [ 16.034182] Calibrating delay using timer specific routine.. 3994.96 BogoMIPS (lpj=7989924) [ 16.034189] CPU: L1 I cache: 32K, L1 D cache: 32K [ 16.034190] CPU: L2 cache: 4096K [ 16.034193] CPU: Physical Processor ID: 0 [ 16.034194] CPU: Processor Core ID: 1 [ 16.034200] CPU1: Thermal monitoring enabled (TM2) [ 16.034701] Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 16.038193] APIC error on CPU1: 00(40) [ 14.199776] Brought up 2 CPUs [ 14.200660] testing NMI watchdog ... OK. [ 16.167270] migration_cost=34 [ 14.329371] NET: Registered protocol family 16 [ 14.329490] ACPI: bus type pci registered [ 14.332878] PCI: Using MMCONFIG at e0000000 [ 14.359558] ACPI: Interpreter enabled [ 14.359652] ACPI: Using IOAPIC for interrupt routing [ 14.360319] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 14.360415] PCI: Probing PCI hardware (bus 00) [ 14.360500] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [ 14.374030] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 [ 14.374251] Boot video device is 0000:01:00.0 [ 14.375276] PCI: Transparent bridge - 0000:00:1e.0 [ 14.375432] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 14.394890] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4 [ 14.395727] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) [ 14.396388] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) [ 14.397133] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 [ 14.398133] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 14.399581] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 14.401009] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 14.402436] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 14.404008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 14.405037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 14.405273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 14.405490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 14.405771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 14.406156] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.406260] pnp: PnP ACPI init [ 14.436606] pnp: PnP ACPI: found 11 devices [ 14.436741] PCI: Using ACPI for IRQ routing [ 14.436836] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 14.437107] PCI-DMA: Disabling IOMMU. [ 14.454173] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 14.454271] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved [ 14.454368] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved [ 14.454466] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved [ 14.454562] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved [ 14.454659] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved [ 14.454755] pnp: 00:03: ioport range 0x1060-0x107f has been reserved [ 14.454851] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved [ 14.454948] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved [ 14.455047] pnp: 00:08: ioport range 0xc80-0xcff has been reserved [ 14.455143] pnp: 00:08: ioport range 0x910-0x91f has been reserved [ 14.455239] pnp: 00:08: ioport range 0x920-0x92f has been reserved [ 14.455337] pnp: 00:08: ioport range 0xcb0-0xcbf has been reserved [ 14.455437] pnp: 00:08: ioport range 0x930-0x97f has been reserved [ 14.455732] PCI: Bridge: 0000:00:01.0 [ 14.455825] IO window: e000-efff [ 14.455920] MEM window: dfd00000-dfefffff [ 14.456014] PREFETCH window: c0000000-cfffffff [ 14.456109] PCI: Bridge: 0000:00:1c.0 [ 14.456202] IO window: disabled. [ 14.456298] MEM window: disabled. [ 14.456393] PREFETCH window: disabled. [ 14.456490] PCI: Bridge: 0000:00:1c.1 [ 14.456583] IO window: disabled. [ 14.456680] MEM window: dfc00000-dfcfffff [ 14.456776] PREFETCH window: disabled. [ 14.456873] PCI: Bridge: 0000:00:1c.3 [ 14.456968] IO window: d000-dfff [ 14.457064] MEM window: dfa00000-dfbfffff [ 14.457160] PREFETCH window: d0000000-d01fffff [ 14.457258] PCI: Bridge: 0000:00:1e.0 [ 14.457351] IO window: disabled. [ 14.457447] MEM window: df900000-df9fffff [ 14.457543] PREFETCH window: disabled. [ 14.457644] GSI 16 sharing vector 0xA9 and IRQ 16 [ 14.457739] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 14.457928] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 14.457944] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 14.458133] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 14.458151] GSI 17 sharing vector 0xB1 and IRQ 17 [ 14.458246] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 [ 14.458435] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 14.458452] GSI 18 sharing vector 0xB9 and IRQ 18 [ 14.458547] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185 [ 14.458736] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 14.458747] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 14.458777] NET: Registered protocol family 2 [ 14.495416] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 14.495664] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 14.496577] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 14.497115] TCP: Hash tables configured (established 131072 bind 65536) [ 14.497211] TCP reno registered [ 14.497512] Simple Boot Flag at 0x79 set to 0x80 [ 16.336445] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 16.336905] audit: initializing netlink socket (disabled) [ 16.337011] audit(1160089602.128:1): initialized [ 16.337252] VFS: Disk quotas dquot_6.5.1 [ 16.337366] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 16.337506] Initializing Cryptographic API [ 16.337600] io scheduler noop registered [ 16.337785] io scheduler anticipatory registered [ 16.337976] io scheduler deadline registered [ 16.338169] io scheduler cfq registered (default) [ 16.340759] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 16.340952] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 16.340966] assign_interrupt_mode Found MSI capability [ 16.341093] Allocate Port Service[0000:00:01.0:pcie00] [ 16.341126] Allocate Port Service[0000:00:01.0:pcie03] [ 16.341165] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 16.341354] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 16.341399] assign_interrupt_mode Found MSI capability [ 16.341538] Allocate Port Service[0000:00:1c.0:pcie00] [ 16.341566] Allocate Port Service[0000:00:1c.0:pcie02] [ 16.341593] Allocate Port Service[0000:00:1c.0:pcie03] [ 16.341630] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 [ 16.341825] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 16.341869] assign_interrupt_mode Found MSI capability [ 16.342006] Allocate Port Service[0000:00:1c.1:pcie00] [ 16.342034] Allocate Port Service[0000:00:1c.1:pcie02] [ 16.342061] Allocate Port Service[0000:00:1c.1:pcie03] [ 16.342096] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185 [ 16.342286] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 16.342331] assign_interrupt_mode Found MSI capability [ 16.342469] Allocate Port Service[0000:00:1c.3:pcie00] [ 16.342498] Allocate Port Service[0000:00:1c.3:pcie02] [ 16.342526] Allocate Port Service[0000:00:1c.3:pcie03] [ 14.520704] Real Time Clock Driver v1.12ac [ 14.520848] Linux agpgart interface v0.101 (c) Dave Jones [ 14.520945] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 14.521492] mice: PS/2 mouse device common for all mice [ 14.522063] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 14.522250] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 14.522348] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 14.522686] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 14.525012] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 14.525276] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 14.525741] TCP bic registered [ 14.525837] NET: Registered protocol family 1 [ 14.525935] NET: Registered protocol family 8 [ 14.526029] NET: Registered protocol family 20 [ 14.526210] ACPI: (supports S0 S3 S4 S5) [ 14.526785] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 14.526898] Freeing unused kernel memory: 188k freed [ 16.372516] input: AT Translated Set 2 keyboard as /class/input/input0 [ 16.407291] Capability LSM initialized [ 16.433908] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] [ 16.434330] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] [ 16.434751] ACPI: Processor [CPU0] (supports 8 throttling states) [ 16.435386] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] [ 16.435800] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707] [ 16.436183] ACPI: Processor [CPU1] (supports 8 throttling states) [ 16.441214] ACPI: Thermal Zone [THM] (53 C) [ 16.695419] SCSI subsystem initialized [ 16.698150] libata version 1.20 loaded. [ 16.699012] ata_piix 0000:00:1f.2: version 1.05 [ 16.699019] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 16.699472] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177 [ 16.699672] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 16.699703] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14 [ 16.977277] ata1: dev 0 cfg 49:2f00 82:746b 83:7f09 84:6063 85:7469 86:3e09 87:6063 88:203f [ 16.977280] ata1: dev 0 ATA-7, max UDMA/100, 231496650 sectors: LBA48 [ 15.150824] ata1: dev 0 configured for UDMA/100 [ 15.150920] scsi0 : ata_piix [ 15.151182] Vendor: ATA Model: TOSHIBA MK1234GS Rev: AH00 [ 15.153902] Type: Direct-Access ANSI SCSI revision: 05 [ 15.154221] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15 [ 15.502526] ata2: dev 0 cfg 49:0f00 82:0000 83:4000 84:4000 85:0000 86:0000 87:4000 88:0407 [ 15.502529] ata2: dev 0 ATAPI, max UDMA/33 [ 15.694274] ata2: dev 0 configured for UDMA/33 [ 15.694368] scsi1 : ata_piix [ 15.696201] Vendor: TSSTcorp Model: DVD+-RW TS-L632D Rev: DE03 [ 15.698927] Type: CD-ROM ANSI SCSI revision: 05 [ 15.704733] SCSI device sda: 231496650 512-byte hdwr sectors (118526 MB) [ 15.704840] sda: Write Protect is off [ 15.704931] sda: Mode Sense: 00 3a 00 00 [ 15.704944] SCSI device sda: drive cache: write back [ 15.705079] SCSI device sda: 231496650 512-byte hdwr sectors (118526 MB) [ 15.705496] sda: Write Protect is off [ 15.705591] sda: Mode Sense: 00 3a 00 00 [ 15.705606] SCSI device sda: drive cache: write back [ 15.705701] sda: sda1 sda2 < sda5 > [ 15.758101] sd 0:0:0:0: Attached scsi disk sda [ 15.928925] ide0: I/O resource 0x1F0-0x1F7 not free. [ 15.929025] ide0: ports already in use, skipping probe [ 15.929120] ide1: I/O resource 0x170-0x177 not free. [ 15.929215] ide1: ports already in use, skipping probe [ 17.784755] usbcore: registered new driver usbfs [ 17.784871] usbcore: registered new driver hub [ 17.785660] USB Universal Host Controller Interface driver v3.0 [ 17.785798] GSI 19 sharing vector 0xE9 and IRQ 19 [ 17.785894] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 233 [ 17.786088] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 17.786092] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 17.786292] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 17.786423] uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000bf80 [ 17.786583] usb usb1: configuration #1 chosen from 1 choice [ 17.786693] hub 1-0:1.0: USB hub found [ 17.786790] hub 1-0:1.0: 2 ports detected [ 17.817492] ieee1394: Initialized config rom entry `ip1394' [ 17.891855] GSI 20 sharing vector 0x32 and IRQ 20 [ 17.891951] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 50 [ 17.892146] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 17.892150] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 17.892263] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 17.892394] uhci_hcd 0000:00:1d.1: irq 50, io base 0x0000bf60 [ 17.892553] usb usb2: configuration #1 chosen from 1 choice [ 17.892665] hub 2-0:1.0: USB hub found [ 17.892762] hub 2-0:1.0: 2 ports detected [ 17.999656] GSI 21 sharing vector 0x3A and IRQ 21 [ 17.999756] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 58 [ 17.999946] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 17.999950] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 18.000062] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 18.000191] uhci_hcd 0000:00:1d.2: irq 58, io base 0x0000bf40 [ 18.000343] usb usb3: configuration #1 chosen from 1 choice [ 18.000452] hub 3-0:1.0: USB hub found [ 18.000549] hub 3-0:1.0: 2 ports detected [ 18.107517] GSI 22 sharing vector 0x42 and IRQ 22 [ 18.107617] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 66 [ 18.107807] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 18.107810] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 18.107921] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 18.108048] uhci_hcd 0000:00:1d.3: irq 66, io base 0x0000bf20 [ 18.108201] usb usb4: configuration #1 chosen from 1 choice [ 18.108313] hub 4-0:1.0: USB hub found [ 18.108410] hub 4-0:1.0: 2 ports detected [ 18.135440] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 18.215465] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 233 [ 18.216723] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 18.216728] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 18.216868] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 18.217012] ehci_hcd 0000:00:1d.7: debug port 1 [ 18.217111] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 18.217117] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xffa80000 [ 18.221094] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 18.221614] usb usb5: configuration #1 chosen from 1 choice [ 18.221731] hub 5-0:1.0: USB hub found [ 18.221831] hub 5-0:1.0: 8 ports detected [ 18.327454] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 185 [ 18.380724] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[df9fd800-df9fdfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 16.611736] Attempting manual resume [ 18.496488] kjournald starting. Commit interval 5 seconds [ 16.658060] EXT3-fs: mounted filesystem with ordered data mode. [ 16.832297] usb 1-1: device not accepting address 2, error -71 [ 17.139896] usb 5-1: new high speed USB device using ehci_hcd and address 2 [ 17.280056] usb 5-1: configuration #1 chosen from 1 choice [ 17.280279] hub 5-1:1.0: USB hub found [ 17.280514] hub 5-1:1.0: 4 ports detected [ 17.595356] usb 5-1.4: new full speed USB device using ehci_hcd and address 3 [ 17.700506] usb 5-1.4: configuration #1 chosen from 1 choice [ 19.661564] ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc00016653c50] [ 29.203431] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 29.204506] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 27.544511] agpgart: Detected an Intel 945GM Chipset. [ 27.563316] agpgart: AGP aperture is 256M @ 0x0 [ 27.637049] input: PC Speaker as /class/input/input1 [ 27.642567] hw_random hardware driver 1.0.0 loaded [ 27.690713] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 50 [ 27.691885] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 27.719941] ieee80211_crypt: registered algorithm 'NULL' [ 27.722110] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 27.722210] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 29.854326] sdhci: Secure Digital Host Controller Interface driver, 0.12 [ 29.854428] sdhci: Copyright(c) Pierre Ossman [ 28.042471] Bluetooth: Core ver 2.8 [ 28.042568] NET: Registered protocol family 31 [ 28.042663] Bluetooth: HCI device and connection manager initialized [ 28.042766] Bluetooth: HCI socket layer initialized [ 28.063846] Bluetooth: HCI USB driver ver 2.9 [ 28.064095] usbcore: registered new driver hci_usb [ 28.070565] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 28.070680] 1:0:0:0: Attached scsi generic sg1 type 5 [ 28.153409] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0mp [ 28.153534] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 28.162121] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000 [ 28.174159] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 28.174260] Uniform CD-ROM driver Revision: 3.20 [ 28.174402] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 28.200337] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [ 30.112491] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19) [ 30.112820] GSI 23 sharing vector 0x4A and IRQ 23 [ 30.113059] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 74 [ 30.115449] mmc0: SDHCI at 0xdf9fd400 irq 74 DMA [ 28.277322] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 177 [ 28.277561] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 28.278463] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 30.145500] ts: Compaq touchscreen protocol output [ 30.318588] b44.c:v1.00 (Apr 7, 2006) [ 30.318705] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 177 [ 30.322900] eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:4f:63:3e [ 29.824815] NET: Registered protocol family 17 [ 32.133159] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [ 30.843953] lp: driver loaded but no devices found [ 30.896242] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 30.896344] ieee1394: sbp2: Try serialize_io=0 for better performance [ 32.754303] Adding 3004112k swap on /dev/disk/by-uuid/4ab73b21-adb7-4830-be5b-7bf3c7920bb8. Priority:-1 extents:1 across:3004112k [ 30.980180] EXT3 FS on sda1, internal journal [ 33.133975] ACPI: AC Adapter [AC] (on-line) [ 35.013427] ACPI: Battery Slot [BAT0] (battery present) [ 33.183793] ACPI: Lid Switch [LID] [ 33.183802] ACPI: Power Button (CM) [PBTN] [ 33.183807] ACPI: Sleep Button (CM) [SBTN] [ 33.268051] ibm_acpi: ec object not found [ 33.296345] pcc_acpi: loading... [ 33.369152] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 33.369505] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 33.369560] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 36.644413] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 36.647128] [fglrx] Maximum main memory to use for locked dma buffers: 919 MBytes. [ 36.647181] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0 [ 36.694119] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 39.010094] NET: Registered protocol family 10 [ 39.010165] lo: Disabled Privacy Extensions [ 39.010198] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 39.010200] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 39.010221] IPv6 over IPv4 tunneling driver [ 39.563786] [fglrx] total GART = 134217728 [ 39.563790] [fglrx] free GART = 118226944 [ 39.563793] [fglrx] max single GART = 118226944 [ 39.563795] [fglrx] total LFB = 122769408 [ 39.563796] [fglrx] free LFB = 104214528 [ 39.563798] [fglrx] max single LFB = 104214528 [ 39.563800] [fglrx] total Inv = 0 [ 39.563802] [fglrx] free Inv = 0 [ 39.563803] [fglrx] max single Inv = 0 [ 39.563805] [fglrx] total TIM = 0 [ 40.012596] Bluetooth: L2CAP ver 2.8 [ 40.012602] Bluetooth: L2CAP socket layer initialized [ 40.176906] Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1 [ 40.223857] Bluetooth: RFCOMM socket layer initialized [ 40.223877] Bluetooth: RFCOMM TTY layer initialized [ 40.223880] Bluetooth: RFCOMM ver 1.7 [ 68.684882] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 79.074915] eth1: no IPv6 routers present [ 84.048690] ieee80211_crypt: registered algorithm 'TKIP' [ 104.023905] mtrr: no MTRR for c0000000,800000 found [ 104.023912] mtrr: no MTRR for c0800000,200000 found [ 104.023916] mtrr: no MTRR for c0a00000,80000 found [ 104.023919] mtrr: no MTRR for c0a80000,40000 found [ 104.023923] mtrr: no MTRR for c0ac0000,8000 found [ 104.023926] mtrr: no MTRR for c0ac8000,2000 found [ 104.023930] mtrr: no MTRR for c0aca000,1000 found [ 104.322630] eth1: no IPv6 routers present [ 104.463719] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 107.800756] [fglrx] total GART = 134217728 [ 107.800765] [fglrx] free GART = 118226944 [ 107.800767] [fglrx] max single GART = 118226944 [ 107.800769] [fglrx] total LFB = 122769408 [ 107.800772] [fglrx] free LFB = 104214528 [ 107.800775] [fglrx] max single LFB = 104214528 [ 107.800776] [fglrx] total Inv = 0 [ 107.800778] [fglrx] free Inv = 0 [ 107.800779] [fglrx] max single Inv = 0 [ 107.800781] [fglrx] total TIM = 0