Asus P5b and Edgy Beta

[flojlg]

p5b + e6300 + nvidia7900 + ocz 2X1G + 2XHD 250 G
Standard w/o overclock

at boot of the dvd :
jmicron ok, cd checked ok, but then:
Device usb3 not accepting adress2 err-71
can't access tty

boot again several bios param tried (noacpi, hd in comp mode...)
same issue:
missing module: ide core
eth interface not detected,
ide not detectected

I have tried several HD pilote suggred (sata+...) and still nothing back to the pilote choice.

Tried an update from dapper installed by external dvd everything work but the update give a lot of error message as :
/etc/xxxx/xxxx... does not exist canot write file xxxx
all the directories exists but still
Boot hang with the new kernels but boot on the old dapper one !!?!!

++

[Giblet5 (pw-byteshuffler)]

I'll confirm some of that.

Asus P5B Deluxe WiFi + Promise PATA

Edgy 'alternate' daily of Oct 12:

CD boots fine, install finds no hard disk drives. Cool trick since there's well over a TB in the box -- that Dapper can see just fine.

JMicron is there (I have nothing hooked to it)
ICH8 is not there.
Promise card is there (DVD-Rs)
Sil card is there.

[John Pham (jhnphm)]

Adding irqpoll as a boot parameter appears to help. However, /proc/cpuinfo returns the CPU's speed at stock settings, not when overclocked.

[Thomas Hotz (thotz-deactivatedaccount)]

flojlg: Could you please retest with a fresh Ubuntu Edgy install? This bug could be related to Bug #57502 and is marked as "Fix Released". Thanks.

[Giblet5 (pw-byteshuffler)]

The fix is confirmed. Thanks for the update!

Cheers,
-G

On Fri, 2007-03-23 at 17:04 +0000, Thomas Hotz wrote:
> flojlg: Could you please retest with a fresh Ubuntu Edgy install? This
> bug could be related to Bug #57502 and is marked as "Fix Released".
> Thanks.
>
> ** Changed in: linux-source-2.6.17 (Ubuntu)
> Assignee: (unassigned) => Thomas Hotz
> Status: Confirmed => Needs Info
>

[Launchpad Janitor (janitor)]

The 18 month support period for Edgy Eft 6.10 has reached its end of life. As a result, we are closing the linux-source-2.6.17 Edgy Eft kernel task. However, development has already began for the upcoming Intrepid Ibex 8.10 release. It would be helpful if you could test the upcoming release and verify if this is still an issue - http://www.ubuntu.com/testing . If the issue still exists, please update this report by changing the Status of the "linux" task from "Incomplete" to "New". We appreciate your patience and understanding as we make this transition. Thanks!