System crash during boot process with error 4 on usplash :

When I use the Edgy Eft Knot 3 CD, the system hang with the following message :

33.228074 usplash[887] : segfault at 0FFFFFFab rip 02B818726F622 rsp 07FFF23977310 error 4

So, I download oldest versions and as I download the Knot 2 CD : the system hang with the same error ;  but with the Knot 1 the system hang with a test pattern or a test chart (une "mire" en français).

Find bellow the result of :

1/ uname -a
2/ cat /proc/cpuinfo 
3/ lspci -vv 

My system (AMD64 Atlon dual core, 2Go of memory) is currently installed with Ubuntu 6.06.1 LTS, Dapper Drake and work perfectly well. The test of the 2Go of RAM is OK.

Please let me know if you want more informations.
Thank for your great job.


whu@ice:~$ uname -a 
Linux ice 2.6.15-26-amd64-k8 #1 SMP PREEMPT Fri Sep 8 20:14:40 UTC 2006 x86_64 GNU/Linux

whu@ice:~$ cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 43
model name      : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
stepping        : 1
cpu MHz         : 1005.162
cache size      : 512 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy
bogomips        : 2012.39
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp

processor       : 1
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 43
model name      : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
stepping        : 1
cpu MHz         : 1005.162
cache size      : 512 KB
physical id     : 0
siblings        : 2
core id         : 1
cpu cores       : 2
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy
bogomips        : 2012.39
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp

whu@ice:~$ lspci -vv
0000:00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
        Subsystem: ASUSTeK Computer Inc.: Unknown device 815a
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: <available only to root>

0000:00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev f3)
        Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

0000:00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
        Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at e400 [size=32]
        Region 4: I/O ports at 4c00 [size=64]
        Region 5: I/O ports at 4c40 [size=64]
        Capabilities: <available only to root>

0000:00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 50
        Region 0: Memory at d3104000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <available only to root>

0000:00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin B routed to IRQ 233
        Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <available only to root>

0000:00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
        Subsystem: ASUSTeK Computer Inc.: Unknown device 8166
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (500ns min, 1250ns max)
        Interrupt: pin A routed to IRQ 225
        Region 0: I/O ports at dc00 [size=256]
        Region 1: I/O ports at e000 [size=256]
        Region 2: Memory at d3103000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <available only to root>

0000:00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Region 4: I/O ports at f000 [size=16]
        Capabilities: <available only to root>

0000:00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
        Subsystem: ASUSTeK Computer Inc.: Unknown device 815a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 217
        Region 0: I/O ports at 09f0 [size=8]
        Region 1: I/O ports at 0bf0 [size=4]
        Region 2: I/O ports at 0970 [size=8]
        Region 3: I/O ports at 0b70 [size=4]
        Region 4: I/O ports at d800 [size=16]
        Region 5: Memory at d3102000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <available only to root>

0000:00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
        Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 225
        Region 0: I/O ports at 09e0 [size=8]
        Region 1: I/O ports at 0be0 [size=4]
        Region 2: I/O ports at 0960 [size=8]
        Region 3: I/O ports at 0b60 [size=4]
        Region 4: I/O ports at c400 [size=16]
        Region 5: Memory at d3101000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <available only to root>

0000:00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev f2) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=128
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: d3000000-d30fffff
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

0000:00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev f3)
        Subsystem: ASUSTeK Computer Inc.: Unknown device 816a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (250ns min, 5000ns max)
        Interrupt: pin A routed to IRQ 217
        Region 0: Memory at d3100000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at b000 [size=8]
        Capabilities: <available only to root>

0000:00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 0x08 (32 bytes)
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: <available only to root>

0000:00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 0x08 (32 bytes)
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: <available only to root>

0000:00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 0x08 (32 bytes)
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: <available only to root>

0000:00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 0x08 (32 bytes)
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: d0000000-d2ffffff
        Prefetchable memory behind bridge: 00000000c0000000-00000000cff00000
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: <available only to root>

0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Capabilities: <available only to root>

0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0392 (rev a1) (prog-if 00 [VGA])
        Subsystem: ASUSTeK Computer Inc.: Unknown device 81f5
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 66
        Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at d1000000 (64-bit, non-prefetchable) [size=16M]
        Region 5: I/O ports at 9000 [size=128]
        Expansion ROM at d2000000 [disabled] [size=128K]
        Capabilities: <available only to root>

0000:05:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc.: Unknown device 808a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (8000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 58
        Region 0: Memory at d3000000 (32-bit, non-prefetchable) [size=2K]
        Region 1: I/O ports at a000 [size=128]
        Capabilities: <available only to root>