[    0.000000] Bootdata ok (command line is BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash --)
[    0.000000] Linux version 2.6.17-6-amd64-generic (root@yellow) (gcc version 4.1.2 20060715 (prerelease) (Ubuntu 4.1.1-9ubuntu1)) #2 SMP Fri Aug 11 19:10:59 UTC 2006
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[    0.000000]  BIOS-e820: 000000003fef0000 - 000000003fefb000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fefb000 - 000000003ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f6a80
[    0.000000] ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x000000003fef491f
[    0.000000] ACPI: FADT (v001 ATI    Firanha  0x06040000 ATI  0x000f4240) @ 0x000000003fefadff
[    0.000000] ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x000000003fefae73
[    0.000000] ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x000000003fefaf6a
[    0.000000] ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x000000003fefafc4
[    0.000000] ACPI: DSDT (v001    ATI    SB400 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of nodes 1
[    0.000000] Node 0 MemBase 0000000000000000 Limit 000000003fef0000
[    0.000000] NUMA: Using 63 for the hash shift.
[    0.000000] Using node hash shift of 63
[    0.000000] Bootmem setup node 0 0000000000000000-000000003fef0000
[    0.000000] On node 0 totalpages: 256854
[    0.000000]   DMA zone: 2602 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 254252 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:4 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] Setting APIC routing to physical flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] Checking aperture...
[    0.000000] CPU 0: aperture @ 2400000000 size 32 MB
[    0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[    0.000000] No AGP bridge found
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Built 1 zonelists
[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash --
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[    0.000000] time.c: Detected 1989.875 MHz processor.
[   28.512810] Console: colour VGA+ 80x25
[   28.513858] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   28.514602] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   28.530481] Memory: 1019296k/1047488k available (2109k kernel code, 27804k reserved, 1407k data, 188k init)
[   28.609419] Calibrating delay using timer specific routine.. 3983.73 BogoMIPS (lpj=7967462)
[   28.609481] Security Framework v1.0.0 initialized
[   28.609488] SELinux:  Disabled at boot.
[   28.609511] Mount-cache hash table entries: 256
[   28.609684] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   28.609686] CPU: L2 Cache: 1024K (64 bytes/line)
[   28.609689] CPU 0/0(1) -> Node 0 -> Core 0
[   28.609706] SMP alternatives: switching to UP code
[   28.609948] Freeing SMP alternatives: 20k freed
[   28.610098] checking if image is initramfs... it is
[   29.132772] Freeing initrd memory: 6460k freed
[   29.139914] ACPI: Looking for DSDT ... not found!
[   29.743428] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[   29.783468] Using local APIC timer interrupts.
[   29.833666] result 12436736
[   29.833668] Detected 12.436 MHz APIC timer.
[   29.836072] Brought up 1 CPUs
[   29.836108] testing NMI watchdog ... OK.
[   29.876142] migration_cost=0
[   29.876388] NET: Registered protocol family 16
[   29.876414] ACPI: bus type pci registered
[   29.880472] PCI: Using MMCONFIG at e0000000
[   29.880515] PCI: No mmconfig possible on device 0:18
[   29.881513] ACPI: Subsystem revision 20060127
[   29.946547] ACPI: Interpreter enabled
[   29.946549] ACPI: Using IOAPIC for interrupt routing
[   29.946748] ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
[   29.946754] ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
[   29.946758] ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
[   29.946762] ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
[   29.946884] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   29.946887] PCI: Probing PCI hardware (bus 00)
[   29.950194] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[   29.950529] Boot video device is 0000:01:00.0
[   29.951129] PCI: Transparent bridge - 0000:00:14.4
[   29.951190] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses')
[   29.951193] Please report the result to linux-kernel to fix this permanently
[   29.951215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   29.955427] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[   29.955669] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[   29.955931] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[   29.956173] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[   29.956416] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[   29.956656] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[   29.956896] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[   29.957137] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[   29.959126] ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.
[   29.974406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
[   29.975108] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[   29.975370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[   29.976009] Linux Plug and Play Support v0.97 (c) Adam Belay
[   29.976017] pnp: PnP ACPI init
[   29.980130] pnp: PnP ACPI: found 12 devices
[   29.980173] PCI: Using ACPI for IRQ routing
[   29.980176] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   29.980304] PCI-DMA: Disabling IOMMU.
[   29.980442] pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
[   29.980445] pnp: 00:07: ioport range 0x87f-0x87f has been reserved
[   29.980613] PCI: Bridge: 0000:00:02.0
[   29.980616]   IO window: 9000-9fff
[   29.980619]   MEM window: c0100000-c01fffff
[   29.980621]   PREFETCH window: c8000000-cfffffff
[   29.980623] PCI: Bridge: 0000:00:06.0
[   29.980624]   IO window: disabled.
[   29.980627]   MEM window: c0200000-c02fffff
[   29.980628]   PREFETCH window: disabled.
[   29.980633] PCI: Bus 7, cardbus bridge: 0000:06:09.0
[   29.980635]   IO window: 00002000-000020ff
[   29.980637]   IO window: 00002400-000024ff
[   29.980639]   PREFETCH window: 50000000-51ffffff
[   29.980641]   MEM window: 52000000-53ffffff
[   29.980643] PCI: Bridge: 0000:00:14.4
[   29.980648]   IO window: 2000-2fff
[   29.980651]   MEM window: c0300000-c03fffff
[   29.980653]   PREFETCH window: 50000000-51ffffff
[   29.980661] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   29.980666] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   29.980688] PCI: Enabling device 0000:06:09.0 (0004 -> 0007)
[   29.980692] GSI 16 sharing vector 0xB1 and IRQ 16
[   29.980695] ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 23 (level, low) -> IRQ 177
[   29.980752] NET: Registered protocol family 2
[   30.015866] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   30.016234] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[   30.018463] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   30.019623] TCP: Hash tables configured (established 131072 bind 65536)
[   30.019627] TCP reno registered
[   30.020018] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[   30.020353] audit: initializing netlink socket (disabled)
[   30.020364] audit(1158019582.516:1): initialized
[   30.020538] VFS: Disk quotas dquot_6.5.1
[   30.020560] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   30.020612] Initializing Cryptographic API
[   30.020616] io scheduler noop registered
[   30.020625] io scheduler anticipatory registered
[   30.020631] io scheduler deadline registered
[   30.020649] io scheduler cfq registered (default)
[   30.021618] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   30.021622] pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
[   30.021638] assign_interrupt_mode Found MSI capability
[   30.021676] Allocate Port Service[0000:00:02.0:pcie00]
[   30.021711] Allocate Port Service[0000:00:02.0:pcie01]
[   30.021743] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   30.021745] pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
[   30.021760] assign_interrupt_mode Found MSI capability
[   30.021779] Allocate Port Service[0000:00:06.0:pcie00]
[   30.021805] Allocate Port Service[0000:00:06.0:pcie01]
[   30.041209] Real Time Clock Driver v1.12ac
[   30.041246] Linux agpgart interface v0.101 (c) Dave Jones
[   30.041249] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   30.041410] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   30.041565] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[   30.042037] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   30.042158] GSI 17 sharing vector 0xD1 and IRQ 17
[   30.042162] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 209
[   30.042169] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[   30.042229] mice: PS/2 mouse device common for all mice
[   30.042278] isa bounce pool size: 16 pages
[   30.042753] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[   30.042955] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   30.042959] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   30.043240] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[   30.049331] i8042.c: Detected active multiplexing controller, rev 1.1.
[   30.054104] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   30.054373] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   30.055059] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   30.055325] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   30.056045] serio: i8042 KBD port at 0x60,0x64 irq 1
[   30.056306] TCP bic registered
[   30.056317] NET: Registered protocol family 1
[   30.056322] NET: Registered protocol family 8
[   30.056324] NET: Registered protocol family 20
[   30.057937] ACPI wakeup devices: 
[   30.057939] OHC1 OHC2 EHCI  LAN  P2P AUDO MODM 
[   30.057944] ACPI: (supports S0 S3 S4 S5)
[   30.057984] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   30.058004] Freeing unused kernel memory: 188k freed
[   30.106569] usplash[844]: segfault at 0000000029a685cc rip 0000000000402ee6 rsp 0000000029a685c0 error 6
[   31.115955] Capability LSM initialized
[   31.146160] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   31.146166] ACPI: Processor [CPU0] (supports 8 throttling states)
[   31.149298] ACPI: Thermal Zone [THRM] (60 C)
[   31.176292] input: AT Translated Set 2 keyboard as /class/input/input0
[   31.433137] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[   31.433155] GSI 18 sharing vector 0xD9 and IRQ 18
[   31.433159] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 217
[   31.433171] ATIIXP: chipset revision 0
[   31.433172] ATIIXP: not 100% native mode: will probe irqs later
[   31.433182]     ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[   31.433195]     ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[   31.433202] Probing IDE interface ide0...
[   31.722261] hda: ST9100823A, ATA DISK drive
[   32.393378] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   32.397003] Probing IDE interface ide1...
[   33.132625] hdc: MATSHITADVD-RAM UJ-845S, ATAPI CD/DVD-ROM drive
[   33.468050] ide1 at 0x170-0x177,0x376 on irq 15
[   33.476737] hda: max request size: 512KiB
[   33.483568] hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[   33.483760] hda: cache flushes supported
[   33.483812]  hda: hda1 hda2 hda3 < hda5 >
[   33.527806] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[   33.527815] Uniform CD-ROM driver Revision: 3.20
[   33.899593] ieee1394: Initialized config rom entry `ip1394'
[   33.900792] ACPI: PCI Interrupt 0000:06:09.2[C] -> GSI 21 (level, low) -> IRQ 169
[   33.950957] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169]  MMIO=[c0309000-c03097ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   34.001533] usbcore: registered new driver usbfs
[   34.001558] usbcore: registered new driver hub
[   34.002508] GSI 19 sharing vector 0xE1 and IRQ 19
[   34.002512] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 225
[   34.002895] ehci_hcd 0000:00:13.2: EHCI Host Controller
[   34.003064] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[   34.003124] ehci_hcd 0000:00:13.2: irq 225, io mem 0xc0002000
[   34.003137] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   34.215585] usb usb1: configuration #1 chosen from 1 choice
[   34.215608] hub 1-0:1.0: USB hub found
[   34.215615] hub 1-0:1.0: 8 ports detected
[   34.221458] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[   34.326364] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 225
[   34.326669] ohci_hcd 0000:00:13.0: OHCI Host Controller
[   34.326917] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[   34.658435] ohci_hcd 0000:00:13.0: irq 225, io mem 0xc0000000
[   34.718498] usb usb2: configuration #1 chosen from 1 choice
[   34.718589] hub 2-0:1.0: USB hub found
[   34.718601] hub 2-0:1.0: 4 ports detected
[   34.822349] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 225
[   34.822484] ohci_hcd 0000:00:13.1: OHCI Host Controller
[   34.822710] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[   35.149867] ohci_hcd 0000:00:13.1: irq 225, io mem 0xc0001000
[   35.209973] usb usb3: configuration #1 chosen from 1 choice
[   35.210058] hub 3-0:1.0: USB hub found
[   35.210070] hub 3-0:1.0: 4 ports detected
[   35.409774] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f0000671643]
[   35.617313] usb 3-3: new low speed USB device using ohci_hcd and address 2
[   35.824163] usb 3-3: configuration #1 chosen from 1 choice
[   35.832147] usbcore: registered new driver hiddev
[   35.838207] input: Logitech Optical USB Mouse as /class/input/input1
[   35.838289] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-3
[   35.838297] usbcore: registered new driver usbhid
[   35.838299] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   36.386351] ISO 9660 Extensions: Microsoft Joliet Level 3
[   36.458036] ISO 9660 Extensions: RRIP_1991A
[   36.507477] Registering unionfs 1.1.4
[   36.511766] loop: loaded (max 8 devices)
[   36.662123] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[   75.147006] tg3.c:v3.59 (June 8, 2006)
[   75.147030] GSI 20 sharing vector 0xE9 and IRQ 20
[   75.147034] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 233
[   75.147045] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   75.178932] eth0: Tigon3 [partno(BCM95789) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:c0:9f:cb:7f:07
[   75.178939] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
[   75.178942] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[  107.296167] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
[  107.304995] ieee80211_crypt: registered algorithm 'NULL'
[  107.331910] ieee80211: 802.11 data/management/control stack, git-1.1.13
[  107.331914] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[  107.344449] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[  107.564588] ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 23 (level, low) -> IRQ 177
[  107.564602] Yenta: CardBus bridge found at 0000:06:09.0 [1025:007e]
[  107.564624] Yenta: Using CSCINT to route CSC interrupts to PCI
[  107.564626] Yenta: Routing CardBus interrupts to PCI
[  107.564632] Yenta TI: socket 0000:06:09.0, mfunc 0x01721b22, devctl 0x64
[  107.704031] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  108.111007] irda_init()
[  108.111025] NET: Registered protocol family 23
[  108.144022] Yenta: ISA IRQ mask 0x0ef8, PCI irq 177
[  108.144027] Socket status: 30000006
[  108.144030] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[  108.144036] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[  108.144039] pcmcia: parent PCI bridge Memory window: 0xc0300000 - 0xc03fffff
[  108.144043] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
[  108.627046] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[  108.627099] nsc-ircc, chip->init
[  108.627115] nsc-ircc, Found chip at base=0x02e
[  108.627158] nsc-ircc, driver loaded (Dag Brattli)
[  108.627164] nsc_ircc_open(), can't get iobase of 0x2f8
[  108.627213] nsc-ircc, Found chip at base=0x02e
[  108.627255] nsc-ircc, driver loaded (Dag Brattli)
[  108.627257] nsc_ircc_open(), can't get iobase of 0x2f8
[  108.627542] pnp: Device 00:09 disabled.
[  108.630048] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  108.807541] bcm43xx driver
[  108.807654] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 169
[  108.952494] ts: Compaq touchscreen protocol output
[  109.481150] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 209
[  109.584221] parport: PnPBIOS parport detected.
[  109.584388] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[  109.996390] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 209
[  110.416463] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  110.427884] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  110.617833] PM: Writing back config space on device 0000:05:00.0 at offset c (was ac000000, writing 0)
[  111.601091] NET: Registered protocol family 17
[  112.465390] tg3: eth0: Link is up at 100 Mbps, full duplex.
[  112.465394] tg3: eth0: Flow control is on for TX and on for RX.
[  117.334686] ACPI: AC Adapter [ACAD] (on-line)
[  117.451992] ACPI: Battery Slot [BAT1] (battery absent)
[  117.507185] ACPI: Power Button (FF) [PWRF]
[  117.507213] ACPI: Lid Switch [LID]
[  117.507218] ACPI: Power Button (CM) [PWRB]
[  117.507223] ACPI: Sleep Button (CM) [SLPB]
[  117.618534] ibm_acpi: ec object not found
[  117.648541] pcc_acpi: loading...
[  117.836006] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[  119.345274] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[  119.345319] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x4 (1450 mV)
[  119.345322] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
[  119.345325] powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x8 (1350 mV)
[  119.345328] powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
[  119.345332] cpu_init done, current fid 0xc, vid 0x4
[  119.730441] NET: Registered protocol family 10
[  119.730539] lo: Disabled Privacy Extensions
[  119.730666] IPv6 over IPv4 tunneling driver
[  123.430518] lp0: using parport0 (interrupt-driven).
[  123.488949] ppdev: user-space parallel port driver
[  128.545332] [drm] Initialized drm 1.0.1 20051102
[  128.623095] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 233
[  128.623658] [drm] Initialized radeon 1.24.0 20060225 on minor 0
[  129.916289] eth0: no IPv6 routers present
[  129.988387] [drm] Setting GART location based on new memory map
[  129.989078] [drm] Loading R300 Microcode
[  129.989115] [drm] writeback test succeeded in 1 usecs
[  144.713196] ttyS1: LSR safety check engaged!
[  158.224720] Bluetooth: Core ver 2.8
[  158.224723] NET: Registered protocol family 31
[  158.224725] Bluetooth: HCI device and connection manager initialized
[  158.224735] Bluetooth: HCI socket layer initialized
[  158.327778] Bluetooth: L2CAP ver 2.8
[  158.327781] Bluetooth: L2CAP socket layer initialized
[  158.589774] Bluetooth: RFCOMM socket layer initialized
[  158.589788] Bluetooth: RFCOMM TTY layer initialized
[  158.589790] Bluetooth: RFCOMM ver 1.7
[  457.909920] [drm] Setting GART location based on new memory map
[  457.910484] [drm] Loading R300 Microcode
[  457.910502] [drm] writeback test succeeded in 1 usecs
[  476.230505] usb 3-1: new full speed USB device using ohci_hcd and address 3
[  476.309967] usb 3-1: not running at top speed; connect to a high speed hub
[  476.314810] usb 3-1: configuration #1 chosen from 1 choice
[  476.439109] usbcore: registered new driver libusual
[  476.505812] SCSI subsystem initialized
[  476.539625] Initializing USB Mass Storage driver...
[  476.539680] scsi0 : SCSI emulation for USB Mass Storage devices
[  476.539717] usb-storage: device found at 3
[  476.539719] usb-storage: waiting for device to settle before scanning
[  476.539726] usbcore: registered new driver usb-storage
[  476.539728] USB Mass Storage support registered.
[  478.536895] usb-storage: device scan complete
[  478.539286]   Vendor: C-ONE     Model: 128MB TINY        Rev: 2.00
[  478.539293]   Type:   Direct-Access                      ANSI SCSI revision: 02
[  478.606000] SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
[  478.608395] sda: Write Protect is off
[  478.608398] sda: Mode Sense: 03 00 00 00
[  478.608400] sda: assuming drive cache: write through
[  478.617984] SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
[  478.620382] sda: Write Protect is off
[  478.620384] sda: Mode Sense: 03 00 00 00
[  478.620386] sda: assuming drive cache: write through
[  478.620642]  sda: unknown partition table
[  478.632744] sd 0:0:0:0: Attached scsi removable disk sda
[  478.662234] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  498.897078] UDF-fs: No partition found (1)
[  498.988170] UDF-fs: No partition found (1)
[  499.227883] Unable to identify CD-ROM format.
[  499.467197] Unable to identify CD-ROM format.
[  499.505973] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!