[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f5570
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 VIAK8                                 ) @ 0x000f6f00
[17179569.184000] ACPI: RSDT (v001 VIAK8  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
[17179569.184000] ACPI: FADT (v001 VIAK8  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[17179569.184000] ACPI: MADT (v001 VIAK8  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7ec0
[17179569.184000] ACPI: DSDT (v001 VIAK8  AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda3 ro quiet splash locale=de_DE
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 801.908 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.780000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.780000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.820000] Memory: 1029764k/1048512k available (1910k kernel code, 18000k reserved, 1070k data, 308k init, 131008k highmem)
[17179569.820000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.900000] Calibrating delay using timer specific routine.. 1605.74 BogoMIPS (lpj=3211496)
[17179569.900000] Security Framework v1.0.0 initialized
[17179569.900000] SELinux:  Disabled at boot.
[17179569.900000] Mount-cache hash table entries: 512
[17179569.900000] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
[17179569.900000] CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
[17179569.900000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.900000] CPU: L2 Cache: 1024K (64 bytes/line)
[17179569.900000] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000
[17179569.900000] Checking 'hlt' instruction... OK.
[17179569.916000] SMP alternatives: switching to UP code
[17179569.916000] Freeing SMP alternatives: 16k freed
[17179569.916000] checking if image is initramfs... it is
[17179570.976000] Freeing initrd memory: 5228k freed
[17179570.976000] ACPI: Core revision 20060707
[17179570.980000] ACPI: Looking for DSDT ... not found!
[17179570.984000] CPU0: AMD Athlon(tm) 64 Processor 3400+ stepping 08
[17179570.984000] Total of 1 processors activated (1605.74 BogoMIPS).
[17179570.984000] ENABLING IO-APIC IRQs
[17179570.984000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[17179571.128000] Brought up 1 CPUs
[17179571.128000] migration_cost=0
[17179571.128000] NET: Registered protocol family 16
[17179571.128000] EISA bus registered
[17179571.128000] ACPI: bus type pci registered
[17179571.128000] PCI: PCI BIOS revision 2.10 entry at 0xfb8e0, last bus=1
[17179571.128000] PCI: Using configuration type 1
[17179571.128000] Setting up standard PCI resources
[17179571.148000] ACPI: Interpreter enabled
[17179571.148000] ACPI: Using IOAPIC for interrupt routing
[17179571.148000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.148000] PCI: Probing PCI hardware (bus 00)
[17179571.152000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.0
[17179571.156000] PCI: Quirk-MSI-K8T Soundcard On
[17179571.156000] PCI: MSI-K8T soundcard on
[17179571.156000] Boot video device is 0000:01:00.0
[17179571.156000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.264000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[17179571.268000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[17179571.268000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[17179571.268000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[17179571.268000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179571.268000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179571.268000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179571.272000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179571.272000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[17179571.272000] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
[17179571.272000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
[17179571.272000] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[17179571.280000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.280000] pnp: PnP ACPI init
[17179571.288000] pnp: PnP ACPI: found 15 devices
[17179571.288000] PnPBIOS: Disabled by ACPI PNP
[17179571.288000] PCI: Using ACPI for IRQ routing
[17179571.288000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179571.320000] pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
[17179571.320000] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
[17179571.320000] PCI: Bridge: 0000:00:01.0
[17179571.320000]   IO window: disabled.
[17179571.320000]   MEM window: e8000000-e9ffffff
[17179571.320000]   PREFETCH window: d0000000-dfffffff
[17179571.320000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.320000] NET: Registered protocol family 2
[17179571.360000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.360000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179571.360000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179571.360000] TCP: Hash tables configured (established 131072 bind 65536)
[17179571.360000] TCP reno registered
[17179571.364000] audit: initializing netlink socket (disabled)
[17179571.364000] audit(1161109041.364:1): initialized
[17179571.364000] highmem bounce pool size: 64 pages
[17179571.364000] VFS: Disk quotas dquot_6.5.1
[17179571.364000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.364000] Initializing Cryptographic API
[17179571.364000] io scheduler noop registered
[17179571.364000] io scheduler anticipatory registered
[17179571.364000] io scheduler deadline registered
[17179571.364000] io scheduler cfq registered (default)
[17179571.364000] isapnp: Scanning for PnP cards...
[17179571.716000] isapnp: No Plug & Play device found
[17179571.752000] Real Time Clock Driver v1.12ac
[17179571.752000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.752000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.756000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.756000] mice: PS/2 mouse device common for all mice
[17179571.756000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.756000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.756000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.756000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.756000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.756000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.756000] EISA: Probing bus 0 at eisa.0
[17179571.756000] Cannot allocate resource for EISA slot 1
[17179571.756000] Cannot allocate resource for EISA slot 4
[17179571.756000] Cannot allocate resource for EISA slot 5
[17179571.756000] EISA: Detected 0 cards.
[17179571.756000] TCP bic registered
[17179571.756000] NET: Registered protocol family 1
[17179571.756000] NET: Registered protocol family 8
[17179571.756000] NET: Registered protocol family 20
[17179571.756000] Using IPI No-Shortcut mode
[17179571.756000] ACPI: (supports S0 S3 S4 S5)
[17179571.756000] Freeing unused kernel memory: 308k freed
[17179571.788000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.032000] Capability LSM initialized
[17179573.096000] ACPI: Fan [FAN] (on)
[17179573.108000] ACPI: Thermal Zone [THRM] (26 C)
[17179573.960000] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
[17179573.960000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[17179573.960000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[17179573.960000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
[17179573.960000] PCI: Via IRQ fixup for 0000:00:0f.0, from 255 to 9
[17179573.960000] VP_IDE: chipset revision 6
[17179573.960000] VP_IDE: not 100% native mode: will probe irqs later
[17179573.960000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
[17179573.960000]     ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:DMA
[17179573.960000]     ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:pio
[17179573.960000] Probing IDE interface ide0...
[17179574.396000] hda: ST3200021A, ATA DISK drive
[17179574.848000] hdb: SAMSUNG DVD-ROM SD-616E, ATAPI CD/DVD-ROM drive
[17179574.908000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.912000] Probing IDE interface ide1...
[17179575.792000] hdc: LITE-ON DVD+RW SOHW-802S, ATAPI CD/DVD-ROM drive
[17179576.468000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.480000] hda: max request size: 512KiB
[17179576.504000] hda: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63, UDMA(100)
[17179576.504000] hda: cache flushes supported
[17179576.504000]  hda: hda1 hda2 < hda5 hda6 > hda3 hda4
[17179576.568000] hdb: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179576.568000] Uniform CD-ROM driver Revision: 3.20
[17179576.612000] hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179577.096000] usbcore: registered new driver usbfs
[17179577.096000] usbcore: registered new driver hub
[17179577.096000] USB Universal Host Controller Interface driver v3.0
[17179577.096000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[17179577.096000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[17179577.096000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179577.096000] PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 1
[17179577.096000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179577.096000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179577.096000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000d000
[17179577.096000] usb usb1: configuration #1 chosen from 1 choice
[17179577.096000] hub 1-0:1.0: USB hub found
[17179577.096000] hub 1-0:1.0: 2 ports detected
[17179577.172000] ieee1394: Initialized config rom entry `ip1394'
[17179577.228000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179577.228000] PCI: Via IRQ fixup for 0000:00:10.4, from 255 to 1
[17179577.228000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179577.228000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 2
[17179577.228000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xea004000
[17179577.228000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.228000] usb usb2: configuration #1 chosen from 1 choice
[17179577.228000] hub 2-0:1.0: USB hub found
[17179577.228000] hub 2-0:1.0: 8 ports detected
[17179577.356000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 185
[17179577.356000] PCI: Via IRQ fixup for 0000:00:0e.0, from 5 to 9
[17179577.408000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[185]  MMIO=[ea003000-ea0037ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[17179577.412000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179577.412000] PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 1
[17179577.412000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179577.412000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[17179577.412000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000d400
[17179577.412000] usb usb3: configuration #1 chosen from 1 choice
[17179577.412000] hub 3-0:1.0: USB hub found
[17179577.412000] hub 3-0:1.0: 2 ports detected
[17179577.520000] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179577.520000] PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 1
[17179577.520000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179577.520000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[17179577.520000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d800
[17179577.520000] usb usb4: configuration #1 chosen from 1 choice
[17179577.520000] hub 4-0:1.0: USB hub found
[17179577.520000] hub 4-0:1.0: 2 ports detected
[17179577.628000] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179577.628000] PCI: Via IRQ fixup for 0000:00:10.3, from 255 to 1
[17179577.628000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179577.628000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[17179577.628000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000dc00
[17179577.628000] usb usb5: configuration #1 chosen from 1 choice
[17179577.628000] hub 5-0:1.0: USB hub found
[17179577.628000] hub 5-0:1.0: 2 ports detected
[17179577.896000] Attempting manual resume
[17179577.924000] kjournald starting.  Commit interval 5 seconds
[17179577.924000] EXT3-fs: mounted filesystem with ordered data mode.
[17179577.996000] usb 2-6: new high speed USB device using ehci_hcd and address 3
[17179578.144000] usb 2-6: configuration #1 chosen from 1 choice
[17179578.692000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc000072e290]
[17179579.152000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179579.456000] usb 1-1: configuration #1 chosen from 1 choice
[17179587.664000] Linux agpgart interface v0.101 (c) Dave Jones
[17179587.676000] agpgart: Detected AGP bridge 0
[17179587.684000] agpgart: AGP aperture is 128M @ 0xe0000000
[17179587.724000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179587.728000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179589.436000] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179589.736000] prism2pci_init: prism2_pci.o: 0.2.5 Loaded
[17179589.752000] Linux video capture interface: v1.00
[17179589.760000] Floppy drive(s): fd0 is 1.44M
[17179589.780000] FDC 0 is a post-1991 82077
[17179589.848000] parport: PnPBIOS parport detected.
[17179589.848000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179589.856000] AC'97 0 analog subsections not ready
[17179589.864000] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 201
[17179589.864000] A Prism2.5 PCI device found, phymem:0xea000000, irq:201, mem:0xf8b58000
[17179590.632000] PCI: Enabling device 0000:00:11.5 (0000 -> 0001)
[17179590.632000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[17179590.632000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[17179590.632000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 209
[17179590.632000] PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 1
[17179590.636000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179590.736000] nvidia: module license 'NVIDIA' taints kernel.
[17179590.740000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179590.964000] bttv: driver version 0.9.16 loaded
[17179590.964000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179591.172000] gameport: EMU10K1 is pci0000:00:05.1/gameport0, io 0xc400, speed 1125kHz
[17179591.172000] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[17179591.172000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[17179591.172000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 217
[17179591.172000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 9
[17179591.172000] eth0: VIA Rhine II at 0x1e000, 00:11:09:6f:a1:49, IRQ 217.
[17179591.172000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[17179591.176000] bttv: Bt8xx card found (0).
[17179591.176000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 225
[17179591.176000] bttv0: Bt878 (rev 17) at 0000:00:07.0, irq: 225, latency: 32, mmio: 0xea001000
[17179591.176000] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
[17179591.176000] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
[17179591.176000] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[17179591.176000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[17179591.176000] bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no
[17179591.176000] bttv0: using tuner=33
[17179591.176000] input: ImPS/2 Generic Wheel Mouse as /class/input/input1
[17179591.176000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[17179591.180000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[17179591.180000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[17179591.204000] input: PC Speaker as /class/input/input2
[17179591.228000] tda9887 1-0043: chip found @ 0x86 (bt878 #0 [sw])
[17179591.264000] tuner 1-0060: Chip ID is not zero. It is not a TEA5767
[17179591.264000] tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
[17179591.272000] tuner 1-0060: microtune: companycode=3cbf part=42 rev=22
[17179591.276000] tuner 1-0060: microtune MT2050 found, OK
[17179591.308000] bttv0: registered device video0
[17179591.308000] bttv0: registered device vbi0
[17179591.308000] bttv0: PLL: 28636363 => 35468950 .. ok
[17179591.348000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179591.348000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8774  Tue Aug  1 20:54:08 PDT 2006
[17179592.032000] orinoco 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[17179592.036000] orinoco_pci 0.15rc3 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)
[17179592.076000] ieee80211_crypt: registered algorithm 'NULL'
[17179592.140000] bt878: AUDIO driver version 0.0.0 loaded
[17179592.140000] bt878: Bt878 AUDIO function found (0).
[17179592.140000] ACPI: PCI Interrupt 0000:00:07.1[A] -> GSI 18 (level, low) -> IRQ 225
[17179592.140000] bt878_probe: card id=[0x1211bd], Unknown card.
[17179592.140000] Exiting..
[17179592.140000] ACPI: PCI interrupt for device 0000:00:07.1 disabled
[17179592.140000] bt878: probe of 0000:00:07.1 failed with error -22
[17179592.152000] pwc Philips webcam module version 9.0.2-unofficial loaded.
[17179592.152000] pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[17179592.152000] pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[17179592.152000] pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[17179592.152000] pwc Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II) USB webcam detected.
[17179592.252000] hostap_pci: 0.4.4-kernel (Jouni Malinen <jkmaline@cc.hut.fi>)
[17179592.256000] pwc Registered as /dev/video1.
[17179592.256000] usbcore: registered new driver Philips webcam
[17179592.264000] usbcore: registered new driver libusual
[17179592.292000] SCSI subsystem initialized
[17179592.320000] Initializing USB Mass Storage driver...
[17179592.324000] scsi0 : SCSI emulation for USB Mass Storage devices
[17179592.324000] usbcore: registered new driver usb-storage
[17179592.324000] USB Mass Storage support registered.
[17179592.324000] usb-storage: device found at 3
[17179592.324000] usb-storage: waiting for device to settle before scanning
[17179592.516000] usbcore: registered new driver snd-usb-audio
[17179592.724000] ts: Compaq touchscreen protocol output
[17179593.508000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179593.688000] lp0: using parport0 (interrupt-driven).
[17179593.728000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179593.728000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179593.788000] Adding 498004k swap on /dev/disk/by-uuid/758ce0aa-2c7e-4648-83c7-9f861c44ca36.  Priority:-1 extents:1 across:498004k
[17179593.960000] EXT3 FS on hda3, internal journal
[17179594.604000] NET: Registered protocol family 17
[17179597.328000] usb-storage: device scan complete
[17179597.328000]   Vendor: Generic   Model: CF Card       CF  Rev: 1.4B
[17179597.328000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179597.328000]   Vendor: Generic   Model: MS Card       MS  Rev: 1.4B
[17179597.332000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179597.332000]   Vendor: Generic   Model: SD Card   MMC/SD  Rev: 1.4B
[17179597.332000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179597.332000]   Vendor: Generic   Model: SM/XD Card    SM  Rev: 1.4B
[17179597.332000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179597.412000] sd 0:0:0:0: Attached scsi removable disk sda
[17179597.428000] sd 0:0:0:1: Attached scsi removable disk sdb
[17179597.432000] sd 0:0:0:2: Attached scsi removable disk sdc
[17179597.444000] sd 0:0:0:3: Attached scsi removable disk sdd
[17179597.460000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179597.460000] sd 0:0:0:1: Attached scsi generic sg1 type 0
[17179597.460000] sd 0:0:0:2: Attached scsi generic sg2 type 0
[17179597.460000] sd 0:0:0:3: Attached scsi generic sg3 type 0
[17179598.324000] kjournald starting.  Commit interval 5 seconds
[17179598.336000] EXT3 FS on hda4, internal journal
[17179598.336000] EXT3-fs: mounted filesystem with ordered data mode.
[17179598.380000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179598.436000] NTFS volume version 3.1.
[17179602.264000] NET: Registered protocol family 10
[17179602.264000] lo: Disabled Privacy Extensions
[17179602.264000] IPv6 over IPv4 tunneling driver
[17179604.128000] ACPI: Power Button (FF) [PWRF]
[17179604.128000] ACPI: Power Button (CM) [PWRB]
[17179604.376000] ibm_acpi: ec object not found
[17179604.424000] pcc_acpi: loading...
[17179605.016000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[17179605.016000] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)
[17179605.016000] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
[17179605.016000] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0xa (1300 mV)
[17179605.016000] cpu_init done, current fid 0x0, vid 0xa
[17179607.180000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179607.180000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179607.180000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179607.888000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179607.888000] apm: overridden by ACPI.
[17179612.716000] eth0: no IPv6 routers present