julien@julien-laptop:~$ uname -a
Linux julien-laptop 2.6.22-14-generic #1 SMP Tue Feb 12 07:42:25 UTC 2008 i686 GNU/Linux
###########
julien@julien-laptop:~$ sudo lspci -vv
[sudo] password for julien:
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
        Subsystem: Hewlett-Packard Company Unknown device 30a4
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 64

00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: c0100000-c01fffff
        Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [44] HyperTransport: MSI Mapping
        Capabilities: [b0] Subsystem: Hewlett-Packard Company Unknown device 30a4

00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express Root Port (Slot-) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x2, ASPM L0s L1, Port 247
                Link: Latency L0s unlimited, L1 unlimited
                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x16
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [b0] Subsystem: ATI Technologies Inc Unknown device 5950
        Capabilities: [b8] HyperTransport: MSI Mapping

00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
        Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000

00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
        Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at c0001000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000

00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (prog-if 20 [EHCI])
        Subsystem: ATI Technologies Inc IXP SB400 USB2 Host Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at c0002000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000

00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
        Subsystem: Hewlett-Packard Company Unknown device 30a4
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Region 0: I/O ports at 8400 [size=16]
        Region 1: Memory at c0003000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [b0] HyperTransport: MSI Mapping

00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller (prog-if 8a [Master SecP PriP])
        Subsystem: Hewlett-Packard Company Unknown device 30a4
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 8410 [size=16]
        Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000

00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=06, subordinate=08, sec-latency=64
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: c0200000-c02fffff
        Prefetchable memory behind bridge: 50000000-53ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
        Subsystem: Hewlett-Packard Company Unknown device 30a4
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min), Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at c0003400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000

00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02) (prog-if 00 [Generic])
        Subsystem: Hewlett-Packard Company Unknown device 30a4
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min), Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at c0003800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Capabilities: [80] HyperTransport: Host or Secondary Interface
                !!! Possibly incomplete decoding
                Command: WarmRst+ DblEnd-
                Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
                Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
                Revision ID: 1.02

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE) (prog-if 00 [VGA])
        Subsystem: Hewlett-Packard Company Unknown device 30a4
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 255 (2000ns min), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at 9000 [size=256]
        Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at c0120000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

06:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
        Subsystem: Hewlett-Packard Company MX6125
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at c0204000 (32-bit, non-prefetchable) [size=8K]

06:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
        Subsystem: Hewlett-Packard Company Unknown device 30a4
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, Cache Line Size: 128 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at c0208000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=06, secondary=07, subordinate=07, sec-latency=176
        Memory window 0: 50000000-53fff000 (prefetchable)
        Memory window 1: 54000000-57fff000
        I/O window 0: 0000a400-0000a4ff
        I/O window 1: 0000a800-0000a8ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

06:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
        Subsystem: Hewlett-Packard Company Unknown device 30a4
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
        Interrupt: pin C routed to IRQ 20
        Region 0: Memory at c0209000 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME+

06:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
        Subsystem: Hewlett-Packard Company Unknown device 30a4
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 20
        Region 0: Memory at c0206000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

06:04.4 Generic system peripheral [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
        Subsystem: Hewlett-Packard Company Unknown device 30a4
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at c020a000 (32-bit, non-prefetchable) [size=256]
        Region 1: Memory at c0209c00 (32-bit, non-prefetchable) [size=256]
        Region 2: Memory at c0209800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

06:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Hewlett-Packard Company Unknown device 30a4
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 128 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 22
        Region 0: I/O ports at a000 [size=256]
        Region 1: Memory at c020a400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
########
julien@julien-laptop:~$ sudo lspci -vvn
00:00.0 0600: 1002:5950 (rev 01)
        Subsystem: 103c:30a4
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 64

00:01.0 0604: 1002:5a3f (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: c0100000-c01fffff
        Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [44] HyperTransport: MSI Mapping
        Capabilities: [b0] Subsystem: 103c:30a4

00:05.0 0604: 1002:5a37 (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express Root Port (Slot-) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x2, ASPM L0s L1, Port 247
                Link: Latency L0s unlimited, L1 unlimited
                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x16
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [b0] Subsystem: 1002:5950
        Capabilities: [b8] HyperTransport: MSI Mapping

00:13.0 0c03: 1002:4374 (prog-if 10 [OHCI])
        Subsystem: 1002:4374
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000

00:13.1 0c03: 1002:4375 (prog-if 10 [OHCI])
        Subsystem: 1002:4375
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at c0001000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000

00:13.2 0c03: 1002:4373 (prog-if 20 [EHCI])
        Subsystem: 1002:4373
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at c0002000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000

00:14.0 0c05: 1002:4372 (rev 11)
        Subsystem: 103c:30a4
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Region 0: I/O ports at 8400 [size=16]
        Region 1: Memory at c0003000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [b0] HyperTransport: MSI Mapping

00:14.1 0101: 1002:4376 (prog-if 8a [Master SecP PriP])
        Subsystem: 103c:30a4
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 8410 [size=16]
        Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000

00:14.3 0601: 1002:4377
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:14.4 0604: 1002:4371 (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=06, subordinate=08, sec-latency=64
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: c0200000-c02fffff
        Prefetchable memory behind bridge: 50000000-53ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:14.5 0401: 1002:4370 (rev 02)
        Subsystem: 103c:30a4
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min), Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at c0003400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000

00:14.6 0703: 1002:4378 (rev 02) (prog-if 00 [Generic])
        Subsystem: 103c:30a4
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min), Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at c0003800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000

00:18.0 0600: 1022:1100
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Capabilities: [80] HyperTransport: Host or Secondary Interface
                !!! Possibly incomplete decoding
                Command: WarmRst+ DblEnd-
                Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
                Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
                Revision ID: 1.02

00:18.1 0600: 1022:1101
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.2 0600: 1022:1102
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.3 0600: 1022:1103
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

01:05.0 0300: 1002:5955 (prog-if 00 [VGA])
        Subsystem: 103c:30a4
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 255 (2000ns min), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at 9000 [size=256]
        Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at c0120000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

06:02.0 0280: 14e4:4318 (rev 02)
        Subsystem: 103c:1356
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at c0204000 (32-bit, non-prefetchable) [size=8K]

06:04.0 0607: 104c:8031
        Subsystem: 103c:30a4
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, Cache Line Size: 128 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at c0208000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=06, secondary=07, subordinate=07, sec-latency=176
        Memory window 0: 50000000-53fff000 (prefetchable)
        Memory window 1: 54000000-57fff000
        I/O window 0: 0000a400-0000a4ff
        I/O window 1: 0000a800-0000a8ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

06:04.2 0c00: 104c:8032 (prog-if 10 [OHCI])
        Subsystem: 103c:30a4
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
        Interrupt: pin C routed to IRQ 20
        Region 0: Memory at c0209000 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME+

06:04.3 0180: 104c:8033
        Subsystem: 103c:30a4
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 20
        Region 0: Memory at c0206000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

06:04.4 0805: 104c:8034
        Subsystem: 103c:30a4
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at c020a000 (32-bit, non-prefetchable) [size=256]
        Region 1: Memory at c0209c00 (32-bit, non-prefetchable) [size=256]
        Region 2: Memory at c0209800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

06:06.0 0200: 10ec:8139 (rev 10)
        Subsystem: 103c:30a4
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 128 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 22
        Region 0: I/O ports at a000 [size=256]
        Region 1: Memory at c020a400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
#########
julien@julien-laptop:~$ sudo dmidecode
# dmidecode 2.9
SMBIOS 2.31 present.
34 structures occupying 1103 bytes.
Table at 0x000D7810.

Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
        Vendor: Hewlett-Packard
        Version: F.22
        Release Date: 11/07/2005
        Address: 0xE6030
        Runtime Size: 106448 bytes
        ROM Size: 512 kB
        Characteristics:
                PCI is supported
                PC Card (PCMCIA) is supported
                PNP is supported
                BIOS is upgradeable
                BIOS shadowing is allowed
                Boot from CD is supported
                Selectable boot is supported
                Print screen service is supported (int 5h)
                8042 keyboard services are supported (int 9h)
                Printer services are supported (int 17h)
                CGA/mono video services are supported (int 10h)
                ACPI is supported
                USB legacy is supported
                AGP is supported
                LS-120 boot is supported
                Smart battery is supported

Handle 0x0001, DMI type 1, 25 bytes
System Information
        Manufacturer: Hewlett-Packard
        Product Name: Pavilion dv5000 (ES266EA#ABF)     
        Version: F.22
        Serial Number: CND6060TGW
        UUID: DED3256E-89DD-11DA-B3CF-000FB0C55A2D
        Wake-up Type: Power Switch

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
        Manufacturer: Hewlett-Packard 
        Product Name: 30A4
        Version: 49.25
        Serial Number: CND6060TGW

Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
        Manufacturer: Hewlett-Packard 
        Type: Notebook
        Lock: Not Present
        Version: N/A
        Serial Number: None
        Asset Tag:                     
        Boot-up State: Safe
        Power Supply State: Safe
        Thermal State: Safe
        Security Status: None
        OEM Information: 0x00000000
        Height: 52 U
        Number Of Power Cords: 18
        Contained Elements: 0

Handle 0x0004, DMI type 4, 35 bytes
Processor Information
        Socket Designation: U23
        Type: Central Processor
        Family: Turion 64
        Manufacturer: AuthenticAMD
        ID: 42 0F 02 00 FF FB 8B 07
        Signature: Family 15, Model 36, Stepping 2
        Flags:
                FPU (Floating-point unit on-chip)
                VME (Virtual mode extension)
                DE (Debugging extension)
                PSE (Page size extension)
                TSC (Time stamp counter)
                MSR (Model specific registers)
                PAE (Physical address extension)
                MCE (Machine check exception)
                CX8 (CMPXCHG8 instruction supported)
                APIC (On-chip APIC hardware supported)
                SEP (Fast system call)
                MTRR (Memory type range registers)
                PGE (Page global enable)
                MCA (Machine check architecture)
                CMOV (Conditional move instruction supported)
                PAT (Page attribute table)
                PSE-36 (36-bit page size extension)
                CLFSH (CLFLUSH instruction supported)
                MMX (MMX technology supported)
                FXSR (Fast floating-point save and restore)
                SSE (Streaming SIMD extensions)
                SSE2 (Streaming SIMD extensions 2)
        Version: Turion 64         
        Voltage: 2.2 V
        External Clock: Unknown
        Max Speed: 1800 MHz
        Current Speed: 800 MHz
        Status: Populated, Enabled
        Upgrade: ZIF Socket
        L1 Cache Handle: Not Provided
        L2 Cache Handle: 0x0005
        L3 Cache Handle: Not Provided
        Serial Number: Not Specified
        Asset Tag: Not Specified
        Part Number: Not Specified

Handle 0x0005, DMI type 7, 19 bytes
Cache Information
        Socket Designation: L2 Cache
        Configuration: Enabled, Socketed, Level 2
        Operational Mode: Write Back
        Location: Internal
        Installed Size: 512 KB
        Maximum Size: 1024 KB
        Supported SRAM Types:
                Burst
                Pipeline Burst
        Installed SRAM Type: Synchronous
        Speed: Unknown
        Error Correction Type: Unknown
        System Type: Unknown
        Associativity: Unknown

Handle 0x0006, DMI type 9, 13 bytes
System Slot Information
        Designation: PCI Slot J1100
        Type: 32-bit PCI
        Current Usage: In Use
        Length: Long
        ID: 0
        Characteristics:
                5.0 V is provided
                3.3 V is provided
                PME signal is supported

Handle 0x0007, DMI type 9, 13 bytes
System Slot Information
        Designation: PCI Slot J1101
        Type: 32-bit PCI
        Current Usage: In Use
        Length: Long
        ID: 0
        Characteristics:
                5.0 V is provided
                3.3 V is provided
                PME signal is supported

Handle 0x0008, DMI type 10, 6 bytes
On Board Device Information
        Type: Video
        Status: Enabled
        Description: SidePort    ...

Handle 0x000A, DMI type 12, 5 bytes
System Configuration Options
        Option 1: Jumper settings can be described here.

Handle 0x000B, DMI type 15, 29 bytes
System Event Log
        Area Length: 16 bytes
        Header Start Offset: 0x0000
        Header Length: 16 bytes
        Data Start Offset: 0x0010
        Access Method: General-purpose non-volatile data functions
        Access Address: 0x0000
        Status: Valid, Not Full
        Change Token: 0x00000001
        Header Format: Type 1
        Supported Log Type Descriptors: 3
        Descriptor 1: POST error
        Data Format 1: POST results bitmap
        Descriptor 2: Single-bit ECC memory error
        Data Format 2: Multiple-event
        Descriptor 3: Multi-bit ECC memory error
        Data Format 3: Multiple-event

Handle 0x000C, DMI type 16, 15 bytes
Physical Memory Array
        Location: System Board Or Motherboard
        Use: System Memory
        Error Correction Type: None
        Maximum Capacity: 4 GB
        Error Information Handle: Not Provided
        Number Of Devices: 2

Handle 0x000D, DMI type 17, 27 bytes
Memory Device
        Array Handle: 0x000C
        Error Information Handle: No Error
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 512 MB
        Form Factor: DIMM
        Set: 1
        Locator: JP11
        Bank Locator: Bank 0
        Type: DRAM
        Type Detail: Synchronous
        Speed: Unknown
        Manufacturer: Not Specified
        Serial Number: Not Specified
        Asset Tag: Not Specified
        Part Number: Not Specified

Handle 0x000E, DMI type 17, 27 bytes
Memory Device
        Array Handle: 0x000C
        Error Information Handle: No Error
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 512 MB
        Form Factor: DIMM
        Set: 2
        Locator: JP30
        Bank Locator: Bank 1
        Type: DRAM
        Type Detail: Synchronous
        Speed: Unknown
        Manufacturer: Not Specified
        Serial Number: Not Specified
        Asset Tag: Not Specified
        Part Number: Not Specified

Handle 0x000F, DMI type 18, 23 bytes
32-bit Memory Error Information
        Type: OK
        Granularity: Unknown
        Operation: Unknown
        Vendor Syndrome: Unknown
        Memory Array Address: Unknown
        Device Address: Unknown
        Resolution: Unknown

Handle 0x0010, DMI type 19, 15 bytes
Memory Array Mapped Address
        Starting Address: 0x00000000000
        Ending Address: 0x0003FFFFFFF
        Range Size: 1 GB
        Physical Array Handle: 0x000C
        Partition Width: 0

Handle 0x0011, DMI type 20, 19 bytes
Memory Device Mapped Address
        Starting Address: 0x00000000000
        Ending Address: 0x0001FFFFFFF
        Range Size: 512 MB
        Physical Device Handle: 0x000D
        Memory Array Mapped Address Handle: 0x0010
        Partition Row Position: 2
        Interleave Position: 1
        Interleaved Data Depth: 6

Handle 0x0012, DMI type 22, 26 bytes
Portable Battery
        Location: Left Front
        Manufacturer: Not Specified
        Name: <BAD INDEX>
        Design Capacity: Unknown
        Design Voltage: Unknown
        SBDS Version: Not Specified
        Maximum Error: Unknown
        SBDS Serial Number: 0000
        SBDS Manufacture Date: 1980-00-00
        SBDS Chemistry: Not Specified
        OEM-specific Information: 0x00000000

Handle 0x0013, DMI type 23, 13 bytes
System Reset
        Status: Enabled
        Watchdog Timer: Present
        Boot Option: Do Not Reboot
        Boot Option On Limit: Do Not Reboot
        Reset Count: Unknown
        Reset Limit: Unknown
        Timer Interval: Unknown
        Timeout: Unknown

Handle 0x0014, DMI type 24, 5 bytes
Hardware Security
        Power-On Password Status: Disabled
        Keyboard Password Status: Unknown
        Administrator Password Status: Enabled
        Front Panel Reset Status: Unknown

Handle 0x0015, DMI type 25, 9 bytes
        System Power Controls
        Next Scheduled Power-on: 12-31 23:59:59

Handle 0x0016, DMI type 26, 22 bytes
Voltage Probe
        Description: Voltage Probe 1
        Location: Processor
        Status: OK
        Maximum Value: Unknown
        Minimum Value: Unknown
        Resolution: Unknown
        Tolerance: Unknown
        Accuracy: Unknown
        OEM-specific Information: 0x00000000
        Nominal Value: 8.192 V

Handle 0x0017, DMI type 26, 20 bytes
Voltage Probe
        Description: Voltage Probe 2
        Location: Processor
        Status: OK
        Maximum Value: Unknown
        Minimum Value: Unknown
        Resolution: Unknown
        Tolerance: Unknown
        Accuracy: Unknown
        OEM-specific Information: 0x00000000

Handle 0x0018, DMI type 27, 14 bytes
Cooling Device
        Temperature Probe Handle: 0x001A
        Type: Fan
        Status: OK
        Cooling Unit Group: 255
        OEM-specific Information: 0x00000000
        Nominal Speed: Unknown Or Non-rotating

Handle 0x0019, DMI type 27, 12 bytes
Cooling Device
        Temperature Probe Handle: 0x001A
        Type: Fan
        Status: OK
        Cooling Unit Group: 255
        OEM-specific Information: 0x00000000

Handle 0x001A, DMI type 28, 22 bytes
Temperature Probe
        Description: Temperature Probe 1
        Location: Processor
        Status: OK
        Maximum Value: Unknown
        Minimum Value Unknown
        Resolution: Unknown
        Tolerance: Unknown
        Accuracy: Unknown
        OEM-specific Information: 0x00000000
        Nominal Value: Unknown

Handle 0x001B, DMI type 28, 20 bytes
Temperature Probe
        Description: Temperature Probe 2
        Location: Processor
        Status: OK
        Maximum Value: Unknown
        Minimum Value Unknown
        Resolution: Unknown
        Tolerance: Unknown
        Accuracy: Unknown
        OEM-specific Information: 0x00000000

Handle 0x001C, DMI type 29, 22 bytes
Electrical Current Probe
        Description: Electrical Current Probe 1
        Location: Processor
        Status: OK
        Maximum Value: Unknown
        Minimum Value: Unknown
        Resolution: Unknown
        Tolerance: Unknown
        Accuracy: Unknown
        OEM-specific Information: 0x00000000
        Nominal Value: Unknown

Handle 0x001D, DMI type 29, 20 bytes
Electrical Current Probe
        Description: Electrical Current Probe 2
        Location: Processor
        Status: OK
        Maximum Value: Unknown
        Minimum Value: Unknown
        Resolution: Unknown
        Tolerance: Unknown
        Accuracy: Unknown
        OEM-specific Information: 0x00000000

Handle 0x001E, DMI type 30, 6 bytes
Out-of-band Remote Access
        Manufacturer Name: Hewlett-Packard
        Inbound Connection: Enabled
        Outbound Connection: Disabled

Handle 0x001F, DMI type 32, 20 bytes
System Boot Information
        Status: <OUT OF SPEC>

Handle 0x0020, DMI type 126, 4 bytes
Inactive

Handle 0x0021, DMI type 127, 4 bytes
End Of Table

Wrong DMI structures count: 34 announced, only 33 decoded.