Linux version 2.6.8-24-default (geeko@buildhost) (gcc version 3.3.4 (pre 3.3.5 20040809)) #1 Wed Oct 6 09:16:23 UTC 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
128MB vmalloc/ioremap area available.
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262128
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 32752 pages, LIFO batch:7
DMI 2.2 present.
ACPI: RSDP (v000 IntelR                                    ) @ 0x000f7810
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7a40
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: local apic disabled
Built 1 zonelists
Kernel command line: BOOT_IMAGE=vmlinuz SuSE=,,D7955C22.001F02, initrd=initrd.gz vga=0x31a splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 3007.012 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 993256k/1048512k available (2074k kernel code, 54576k reserved, 782k data, 212k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5963.77 BogoMIPS (lpj=2981888)
Security Scaffold v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps:        bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs... it is
Freeing initrd memory: 42015k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfba20, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 4 (level, low) -> IRQ 4
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 12
ACPI: PCI interrupt 0000:03:06.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI interrupt 0000:03:06.2[B] -> GSI 5 (level, low) -> IRQ 5
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1099219455.006:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xe8000000, mapped to 0xf8880000, using 10240k, total 131072k
vesafb: mode is 1280x1024x16, linelength=2560, pages=50
vesafb: protected mode interface info at c000:570c
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47601 bytes,<6>...found (1280x1024, 24984 bytes, v3).
Console: switching to colour frame buffer device 158x57
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive
hdb: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PC Speaker
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices: 
PCI0 CSAD HUB0 USB0 USB1 USB2 USB3 USBE MODM 
Freeing unused kernel memory: 212k freed
SCSI subsystem initialized
hda: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache
Uniform CD-ROM driver Revision: 3.20
hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
cloop: Initializing cloop v2.01
cloop: loaded (max 8 devices)
cdrom: open failed.
ISO 9660 Extensions: RRIP_1991A
cloop: losetup_file: 205502 blocks, 16384 bytes/block, largest block is 16397 bytes.
ISO 9660 Extensions: RRIP_1991A
usbcore: registered new driver usbfs
usbcore: registered new driver hub
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
ACPI: PCI interrupt 0000:03:06.0[A] -> GSI 12 (level, low) -> IRQ 12
hw_random hardware driver 1.0.0 loaded
libata version 1.02 loaded.
ata_piix version 1.02
ata_piix: combined mode detected
ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 11 (level, low) -> IRQ 11
ata: 0x1f0 IDE port busy
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
ata1: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003 88:207f
ata1: dev 0 ATA, max UDMA/133, 72303840 sectors: lba48
ata1: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3c01 87:4003 88:20ff
ata1: dev 1 ATA, max UDMA7, 234493056 sectors: lba48
ata1: dev 0 configured for UDMA/133
ata1: dev 1 configured for UDMA/133
scsi0 : ata_piix
  Vendor: ATA       Model: WDC WD360GD-00FN  Rev: 35.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: SAMSUNG SP1213C   Rev: SV10
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB)
SCSI device sda: drive cache: write back
 sda:<5>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0,  type 0
 sda1 sda2 sda3 < sda5 sda6<6>gameport: pci0000:03:06.1 speed 1193 kHz
 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 5, pci mem f9836000
SCSI device sdb: 234493056 512-byte hdwr sectors (120060 MB)
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.8-24-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
SCSI device sdb: drive cache: write back
 sdb:<6>hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
 sdb1 sdb2 sdb3 sdb4
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.0: UHCI Host Controller
e1000: Ignoring new-style parameters in presence of obsolete ones
Intel(R) PRO/1000 Network Driver - version 5.3.19-k2-NAPI
Copyright (c) 1999-2004 Intel Corporation.
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 10, io base 0000bc00
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.8-24-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 3 (level, low) -> IRQ 3
uhci_hcd 0000:00:1d.1: UHCI Host Controller
Linux agpgart interface v0.100 (c) Dave Jones
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 3, io base 0000b000
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.8-24-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 0000b400
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.8-24-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.3: UHCI Host Controller
ieee1394: Initialized config rom entry `ip1394'
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 10, io base 0000b800
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.8-24-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:01.0 to 64
usb 2-1: new full speed USB device using address 2
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
usb 2-1: Product: CanoScan
usb 2-1: Manufacturer: Canon
agpgart: Detected an Intel i875 Chipset.
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 128M @ 0xe0000000
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:03:06.2[B] -> GSI 5 (level, low) -> IRQ 5
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]  MMIO=[fa104000-fa1047ff]  Max Packet=[2048]
usb 2-2: new low speed USB device using address 3
usb 2-2: Product: USB Receiver
usb 2-2: Manufacturer: Logitech
usb 5-2: new low speed USB device using address 2
usb 5-2: Product: Back-UPS ES/CyberFort 500 FW: 4.1.I USB FW: d1
usb 5-2: Manufacturer: American Power Conversion
usb 5-2: SerialNumber: AB0344244853
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c00200031e7]
st: Version 20040403, fixed bufsize 32768, s/g segs 256
evdev_connect: evdev cde94880 handle cde9489c name event0
evdev_connect: evdev cde94780 handle cde9479c name event1
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
usbcore: registered new driver hiddev
evdev_connect: evdev cde88b80 handle cde88b9c name event2
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2
hiddev96: USB HID v1.00 Device [American Power Conversion Back-UPS ES/CyberFort 500 FW: 4.1.I U] on usb-0000:00:1d.3-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
spurious 8259A interrupt: IRQ7.
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
NET: Registered protocol family 17
usbcore: registered new driver snd-usb-audio
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN] (off)
ACPI: Processor [CPU0] (supports C1)
ACPI: Thermal Zone [THRM] (49 C)
powernow: This module only works with AMD K7 CPUs
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
NET: Registered protocol family 10
Disabled Privacy Extensions on device c037f6a0(lo)
IPv6 over IPv4 tunneling driver
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Non-volatile memory driver v1.2
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
Disabled Privacy Extensions on device f69acc00(sit0)
eth0: no IPv6 routers present