System: IBM T22, Ubuntu Edgy, 256MB RAM Using Edgy, when I boot my system I get far more frequent fsck checks than I ever used to on Dapper....it seems to do it nearly every boot, not every 30 or so mounts as it used to. Anyway, after the fsck check I get an error stating: ACPI: Fatal Opcode Executed It has a bunch of number that precede the error, for example: [009087763:977683] ACPI: Fatal Opcode Executed. These numbers aren't the exact example (I just made them up). It is hard to log down the actual numbers during boot because it passes quickly once the error appears and edgy boots into X. Can anyone tell me what this problem is? Is it serious, as in Fatal!? Is there a solution? I was advised to comment here by Alan Pope who was responding to my initial enquiry here: https://launchpad.net/distros/ubuntu/+ticket/2732 Here's the output of the boot log, near the bottom you can see the fatal opcode entries: [17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic) [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) [17179569.184000] BIOS-e820: 000000000fff0000 - 000000000fffec00 (ACPI data) [17179569.184000] BIOS-e820: 000000000fffec00 - 0000000010000000 (ACPI NVS) [17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [17179569.184000] 0MB HIGHMEM available. [17179569.184000] 255MB LOWMEM available. [17179569.184000] On node 0 totalpages: 65520 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] Normal zone: 61424 pages, LIFO batch:15 [17179569.184000] DMI 2.3 present. [17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f7160 [17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0fff4d07 [17179569.184000] ACPI: FADT (v001 IBM TP-T21 0x06040000 0x00000000) @ 0x0fffeb65 [17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x0fffebd9 [17179569.184000] ACPI: DSDT (v001 IBM TP-T21 0x06040000 MSFT 0x0100000c) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x1008 [17179569.184000] Allocating PCI resources starting at 20000000 (gap: 10000000:eff80000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash [17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic" [17179569.184000] mapped APIC to ffffd000 (0120a000) [17179569.184000] Enabling fast FPU save and restore... done. [17179569.184000] Enabling unmasked SIMD FPU exception support... done. [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 1024 (order: 10, 4096 bytes) [17179569.184000] Detected 796.625 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour VGA+ 80x25 [17179572.020000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [17179572.020000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [17179572.048000] Memory: 250216k/262080k available (1910k kernel code, 11288k reserved, 1070k data, 308k init, 0k highmem) [17179572.048000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179572.128000] Calibrating delay using timer specific routine.. 1594.63 BogoMIPS (lpj=3189261) [17179572.128000] Security Framework v1.0.0 initialized [17179572.128000] SELinux: Disabled at boot. [17179572.128000] Mount-cache hash table entries: 512 [17179572.128000] CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [17179572.128000] CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [17179572.128000] CPU: L1 I cache: 16K, L1 D cache: 16K [17179572.128000] CPU: L2 cache: 256K [17179572.128000] CPU serial number disabled. [17179572.128000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [17179572.128000] Checking 'hlt' instruction... OK. [17179572.144000] SMP alternatives: switching to UP code [17179572.144000] Freeing SMP alternatives: 16k freed [17179572.144000] checking if image is initramfs... it is [17179573.348000] Freeing initrd memory: 5254k freed [17179573.348000] ACPI: Core revision 20060707 [17179573.352000] ACPI: Looking for DSDT ... not found! [17179573.360000] ACPI: setting ELCR to 0200 (from 0800) [17179573.392000] CPU0: Intel Pentium III (Coppermine) stepping 06 [17179573.392000] SMP motherboard not detected. [17179573.392000] Local APIC not detected. Using dummy APIC emulation. [17179573.392000] Brought up 1 CPUs [17179573.392000] migration_cost=0 [17179573.392000] NET: Registered protocol family 16 [17179573.392000] EISA bus registered [17179573.392000] ACPI: bus type pci registered [17179573.392000] PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 [17179573.392000] PCI: Using configuration type 1 [17179573.392000] Setting up standard PCI resources [17179573.680000] ACPI: Interpreter enabled [17179573.680000] ACPI: Using PIC for interrupt routing [17179573.684000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [17179573.684000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [17179573.684000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [17179573.688000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [17179573.688000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179573.688000] PCI: Probing PCI hardware (bus 00) [17179573.688000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [17179573.796000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:07.1 [17179573.796000] PCI quirk: region 1000-103f claimed by PIIX4 ACPI [17179573.796000] PCI quirk: region 1040-104f claimed by PIIX4 SMB [17179573.796000] PIIX4 devres C PIO at 15e8-15ef [17179573.796000] PIIX4 devres I PIO at 03f0-03f7 [17179573.796000] PIIX4 devres J PIO at 002e-002f [17179573.796000] Boot video device is 0000:01:00.0 [17179573.796000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179574.020000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [17179574.020000] ACPI: Power Resource [PSER] (off) [17179574.020000] ACPI: Power Resource [PSIO] (on) [17179574.024000] ACPI: Embedded Controller [EC] (gpe 9) interrupt mode. [17179574.028000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179574.028000] pnp: PnP ACPI init [17179574.140000] pnp: PnP ACPI: found 15 devices [17179574.140000] PnPBIOS: Disabled by ACPI PNP [17179574.140000] PCI: Using ACPI for IRQ routing [17179574.140000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179574.148000] pnp: 00:02: ioport range 0x1000-0x103f could not be reserved [17179574.148000] pnp: 00:02: ioport range 0x1040-0x104f has been reserved [17179574.148000] pnp: 00:02: ioport range 0xfe00-0xfe0f has been reserved [17179574.148000] pnp: 00:09: ioport range 0x15e0-0x15ef has been reserved [17179574.148000] PCI: Bridge: 0000:00:01.0 [17179574.148000] IO window: disabled. [17179574.148000] MEM window: f0000000-f7ffffff [17179574.148000] PREFETCH window: 28000000-280fffff [17179574.148000] PCI: Bus 2, cardbus bridge: 0000:00:02.0 [17179574.148000] IO window: 00001400-000014ff [17179574.148000] IO window: 00001c00-00001cff [17179574.148000] PREFETCH window: 20000000-21ffffff [17179574.148000] MEM window: 22000000-23ffffff [17179574.148000] PCI: Bus 6, cardbus bridge: 0000:00:02.1 [17179574.148000] IO window: 00002000-000020ff [17179574.148000] IO window: 00002400-000024ff [17179574.148000] PREFETCH window: 24000000-25ffffff [17179574.148000] MEM window: 26000000-27ffffff [17179574.148000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [17179574.148000] PCI: setting IRQ 11 as level-triggered [17179574.148000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [17179574.148000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [17179574.148000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [17179574.148000] NET: Registered protocol family 2 [17179574.184000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [17179574.184000] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [17179574.184000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [17179574.184000] TCP: Hash tables configured (established 8192 bind 4096) [17179574.184000] TCP reno registered [17179574.184000] Simple Boot Flag at 0x35 set to 0x1 [17179574.184000] audit: initializing netlink socket (disabled) [17179574.184000] audit(1165569151.184:1): initialized [17179574.184000] VFS: Disk quotas dquot_6.5.1 [17179574.184000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179574.184000] Initializing Cryptographic API [17179574.184000] io scheduler noop registered [17179574.184000] io scheduler anticipatory registered [17179574.184000] io scheduler deadline registered [17179574.184000] io scheduler cfq registered (default) [17179574.184000] Limiting direct PCI/PCI transfers. [17179574.184000] isapnp: Scanning for PnP cards... [17179574.540000] isapnp: No Plug & Play device found [17179574.604000] Real Time Clock Driver v1.12ac [17179574.604000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [17179574.604000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [17179574.608000] pnp: Device 00:0c activated. [17179574.608000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [17179574.608000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [17179574.608000] ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [17179574.608000] mice: PS/2 mouse device common for all mice [17179574.612000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179574.612000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179574.612000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179574.612000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [17179574.624000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179574.628000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179574.628000] EISA: Probing bus 0 at eisa.0 [17179574.628000] Cannot allocate resource for EISA slot 1 [17179574.628000] Cannot allocate resource for EISA slot 2 [17179574.628000] EISA: Detected 0 cards. [17179574.632000] TCP bic registered [17179574.632000] NET: Registered protocol family 1 [17179574.632000] NET: Registered protocol family 8 [17179574.632000] NET: Registered protocol family 20 [17179574.632000] Using IPI No-Shortcut mode [17179574.632000] ACPI: (supports S0 S1 S3 S4 S5) [17179574.632000] Freeing unused kernel memory: 308k freed [17179574.656000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179575.860000] Capability LSM initialized [17179575.952000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [17179575.952000] ACPI: Processor [CPU] (supports 8 throttling states) [17179575.956000] ACPI: Thermal Zone [THM0] (30 C) [17179577.008000] PIIX4: IDE controller at PCI slot 0000:00:07.1 [17179577.008000] PIIX4: chipset revision 1 [17179577.008000] PIIX4: not 100% native mode: will probe irqs later [17179577.008000] ide0: BM-DMA at 0x1850-0x1857, BIOS settings: hda:DMA, hdb:pio [17179577.008000] ide1: BM-DMA at 0x1858-0x185f, BIOS settings: hdc:DMA, hdd:pio [17179577.008000] Probing IDE interface ide0... [17179577.300000] hda: IBM-DJSA-220, ATA DISK drive [17179577.984000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179578.032000] Probing IDE interface ide1... [17179578.768000] hdc: HITACHI DVD-ROM GD-S200, ATAPI CD/DVD-ROM drive [17179579.448000] ide1 at 0x170-0x177,0x376 on irq 15 [17179579.468000] hda: max request size: 128KiB [17179579.488000] hda: 39070080 sectors (20003 MB) w/1874KiB Cache, CHS=41344/15/63, UDMA(33) [17179579.488000] hda: cache flushes not supported [17179579.488000] hda: hda1 hda2 < hda5 > hda3 [17179579.588000] hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33) [17179579.588000] Uniform CD-ROM driver Revision: 3.20 [17179580.128000] usbcore: registered new driver usbfs [17179580.128000] usbcore: registered new driver hub [17179580.132000] USB Universal Host Controller Interface driver v3.0 [17179580.136000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [17179580.136000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [17179580.136000] uhci_hcd 0000:00:07.2: UHCI Host Controller [17179580.136000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [17179580.136000] uhci_hcd 0000:00:07.2: irq 11, io base 0x00001860 [17179580.136000] usb usb1: configuration #1 chosen from 1 choice [17179580.136000] hub 1-0:1.0: USB hub found [17179580.136000] hub 1-0:1.0: 2 ports detected [17179580.324000] Attempting manual resume [17179580.456000] kjournald starting. Commit interval 5 seconds [17179580.456000] EXT3-fs: mounted filesystem with ordered data mode. [17179580.480000] usb 1-1: new low speed USB device using uhci_hcd and address 2 [17179580.652000] usb 1-1: configuration #1 chosen from 1 choice [17179596.488000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [17179596.488000] Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130] [17179596.488000] Yenta: Using INTVAL to route CSC interrupts to PCI [17179596.488000] Yenta: Routing CardBus interrupts to PCI [17179596.488000] Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66 [17179596.556000] e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI [17179596.556000] e100: Copyright(c) 1999-2005 Intel Corporation [17179596.624000] irda_init() [17179596.624000] NET: Registered protocol family 23 [17179596.672000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [17179596.672000] nsc-ircc, chip->init [17179596.672000] nsc-ircc, Found chip at base=0x02e [17179596.672000] nsc-ircc, driver loaded (Dag Brattli) [17179596.672000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179596.672000] nsc-ircc, Found chip at base=0x02e [17179596.672000] nsc-ircc, driver loaded (Dag Brattli) [17179596.672000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179596.672000] pnp: Device 00:0e disabled. [17179596.880000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [17179596.880000] Socket status: 30000020 [17179597.296000] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [17179597.384000] e100: eth0: e100_probe: addr 0xe8120000, irq 11, MAC addr 00:10:A4:8B:17:19 [17179597.384000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [17179597.384000] Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130] [17179597.384000] Yenta: Using INTVAL to route CSC interrupts to PCI [17179597.384000] Yenta: Routing CardBus interrupts to PCI [17179597.384000] Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66 [17179597.616000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [17179597.616000] Socket status: 30000006 [17179598.024000] pccard: CardBus card inserted into slot 0 [17179598.164000] Floppy drive(s): fd0 is 1.44M [17179598.180000] FDC 0 is a National Semiconductor PC87306 [17179598.188000] Linux agpgart interface v0.101 (c) Dave Jones [17179598.436000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179598.444000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179598.520000] agpgart: Detected an Intel 440BX Chipset. [17179598.524000] agpgart: AGP aperture is 64M @ 0xf8000000 [17179598.560000] pnp: Device 00:0d activated. [17179598.560000] parport: PnPBIOS parport detected. [17179598.560000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [17179598.848000] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device [17179598.848000] piix4_smbus 0000:00:07.3: IBM Laptop detected; this module may corrupt your serial eeprom! Refusing to load module! [17179598.848000] piix4_smbus: probe of 0000:00:07.3 failed with error -1 [17179598.936000] input: PC Speaker as /class/input/input1 [17179599.296000] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [17179599.424000] usbcore: registered new driver hiddev [17179599.444000] input: ARROW STRONG USB Mouse as /class/input/input2 [17179599.444000] input: USB HID v1.00 Mouse [ARROW STRONG USB Mouse] on usb-0000:00:07.2-1 [17179599.444000] usbcore: registered new driver usbhid [17179599.444000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [17179599.532000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [17179599.572000] input: TPPS/2 IBM TrackPoint as /class/input/input3 [17179599.864000] gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz [17179599.892000] ts: Compaq touchscreen protocol output [17179599.936000] cs: IO port probe 0x100-0x3af: clean. [17179599.936000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [17179599.936000] cs: IO port probe 0x820-0x8ff: clean. [17179599.936000] cs: IO port probe 0xc00-0xcf7: clean. [17179599.936000] cs: IO port probe 0xa00-0xaff: clean. [17179599.936000] cs: IO port probe 0x100-0x3af: clean. [17179599.988000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [17179599.988000] cs: IO port probe 0x820-0x8ff: clean. [17179599.988000] cs: IO port probe 0xc00-0xcf7: clean. [17179599.988000] cs: IO port probe 0xa00-0xaff: clean. [17179601.008000] lp0: using parport0 (interrupt-driven). [17179601.068000] ndiswrapper version 1.22 loaded (preempt=no,smp=yes) [17179601.204000] ndiswrapper: driver bcmwl5 (The Linksys Group, Inc.,02/14/2005, 3.90.36.0) loaded [17179601.204000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002) [17179601.204000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [17179601.204000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [17179601.216000] ndiswrapper: using irq 11 [17179601.872000] wlan0: vendor: '' [17179601.872000] wlan0: ethernet device 00:14:bf:b0:3a:c5 using NDIS driver bcmwl5, 14E4:4318.5.conf [17179601.872000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [17179602.104000] NET: Registered protocol family 17 [17179602.316000] EXT3 FS on hda1, internal journal [17179602.888000] kjournald starting. Commit interval 5 seconds [17179602.896000] EXT3 FS on hda3, internal journal [17179602.896000] EXT3-fs: mounted filesystem with ordered data mode. [17179608.504000] NET: Registered protocol family 10 [17179608.504000] lo: Disabled Privacy Extensions [17179608.504000] IPv6 over IPv4 tunneling driver [17179611.580000] ttyS1: LSR safety check engaged! [17179611.580000] ttyS1: LSR safety check engaged! [17179611.580000] ttyS1: LSR safety check engaged! [17179611.680000] ACPI: Fatal opcode executed [17179611.680000] pnp: Device 00:0e activated. [17179611.724000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [17179611.724000] nsc-ircc, chip->init [17179611.724000] nsc-ircc, Found chip at base=0x02e [17179611.724000] nsc-ircc, driver loaded (Dag Brattli) [17179611.732000] IrDA: Registered device irda0 [17179611.732000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [17179613.984000] ACPI: AC Adapter [AC] (on-line) [17179614.192000] ACPI: Battery Slot [BAT0] (battery present) [17179614.236000] ACPI: Power Button (FF) [PWRF] [17179614.236000] ACPI: Lid Switch [LID] [17179614.236000] ACPI: Sleep Button (CM) [SLPB] [17179614.336000] ACPI: ACPI Dock Station Driver [17179614.480000] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a [17179614.480000] ibm_acpi: http://ibm-acpi.sf.net/ [17179614.632000] pcc_acpi: loading... [17179614.876000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [17179617.760000] IBM machine detected. Enabling interrupts during APM calls. [17179617.760000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [17179617.760000] apm: overridden by ACPI. [17179619.340000] wlan0: no IPv6 routers present [17179621.104000] [drm] Initialized drm 1.0.1 20051102 [17179621.212000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [17179621.216000] [drm] Initialized savage 2.4.1 20050313 on minor 0 [17179621.216000] mtrr: 0xf0000000,0x1000000 overlaps existing 0xf0000000,0x800000 [17179621.216000] mtrr: 0xf4000000,0x4000000 overlaps existing 0xf6000000,0x1000000 [17179621.216000] mtrr: 0xf0000000,0x1000000 overlaps existing 0xf0000000,0x800000 [17179621.216000] mtrr: base(0xf2000000) is not aligned on a size(0x5000000) boundary [17179627.548000] irlap_change_speed(), setting speed to 9600 [17179628.936000] Installing knfsd (copyright (C) 1996