[4294667.296000] Linux version 2.6.15-23-686 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Tue May 23 14:03:07 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
[4294667.296000]  BIOS-e820: 000000001f6e0000 - 000000001f6ea000 (ACPI data)
[4294667.296000]  BIOS-e820: 000000001f6ea000 - 000000001f700000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
[4294667.296000]  BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[4294667.296000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[4294667.296000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 502MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 128736
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 124640 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI present.
[4294667.296000] ACPI: RSDP (v000 TOSCPL                                ) @ 0x000f6b70
[4294667.296000] ACPI: RSDT (v001 TOSCPL   RSDT   0x06040000  LTP 0x00000000) @ 0x1f6e33f6
[4294667.296000] ACPI: MADT (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x1f6e9e88
[4294667.296000] ACPI: FADT (v001 TOSCPL ALVISO   0x06040000 LOHR 0x00000032) @ 0x1f6e9ef0
[4294667.296000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x1f6e9fd8
[4294667.296000] ACPI: MCFG (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x1f6e9f9c
[4294667.296000] ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20030224) @ 0x1f6e430c
[4294667.296000] ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20030224) @ 0x1f6e3c7a
[4294667.296000] ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x1f6e3835
[4294667.296000] ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1f6e3657
[4294667.296000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030224) @ 0x1f6e343e
[4294667.296000] ACPI: DSDT (v001 TOSCPL ALVISO   0x06040000 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x1008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:13 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/sda8 quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 1596.749 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294668.129000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.129000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294668.146000] Memory: 498936k/514944k available (2101k kernel code, 15476k reserved, 592k data, 332k init, 0k highmem)
[4294668.146000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294668.206000] Calibrating delay using timer specific routine.. 3195.38 BogoMIPS (lpj=1597692)
[4294668.206000] Security Framework v1.0.0 initialized
[4294668.206000] SELinux:  Disabled at boot.
[4294668.206000] Mount-cache hash table entries: 512
[4294668.206000] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
[4294668.206000] CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
[4294668.206000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294668.206000] CPU: L2 cache: 2048K
[4294668.206000] CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000
[4294668.206000] mtrr: v2.0 (20020519)
[4294668.206000] Enabling fast FPU save and restore... done.
[4294668.206000] Enabling unmasked SIMD FPU exception support... done.
[4294668.206000] Checking 'hlt' instruction... OK.
[4294668.210000] SMP alternatives: switching to UP code
[4294668.210000] checking if image is initramfs... it is
[4294668.845000] Freeing initrd memory: 6797k freed
[4294668.852000] ACPI: Looking for DSDT ... not found!
[4294668.885000] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
[4294668.886000] Total of 1 processors activated (3195.38 BogoMIPS).
[4294668.886000] ENABLING IO-APIC IRQs
[4294668.886000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294668.997000] Brought up 1 CPUs
[4294668.997000] NET: Registered protocol family 16
[4294668.997000] EISA bus registered
[4294668.997000] ACPI: bus type pci registered
[4294668.997000] PCI: PCI BIOS revision 2.10 entry at 0xfd954, last bus=7
[4294668.997000] PCI: Using MMCONFIG
[4294668.998000] ACPI: Subsystem revision 20051216
[4294669.000000] ACPI: Interpreter enabled
[4294669.000000] ACPI: Using IOAPIC for interrupt routing
[4294669.000000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294669.000000] PCI: Probing PCI hardware (bus 00)
[4294669.023000] Boot video device is 0000:00:02.0
[4294669.023000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[4294669.023000] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[4294669.023000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[4294669.024000] PCI: Transparent bridge - 0000:00:1e.0
[4294669.024000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294669.031000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[4294669.032000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[4294669.033000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[4294669.033000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[4294669.033000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[4294669.033000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[4294669.034000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[4294669.034000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[4294669.034000] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[4294669.034000] ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode.
[4294669.076000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294669.076000] pnp: PnP ACPI init
[4294669.098000] pnp: PnP ACPI: found 9 devices
[4294669.098000] PnPBIOS: Disabled by ACPI PNP
[4294669.098000] PCI: Using ACPI for IRQ routing
[4294669.098000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294669.117000] pnp: 00:00: ioport range 0xfe00-0xfe7f has been reserved
[4294669.117000] pnp: 00:00: ioport range 0xfe80-0xfeff has been reserved
[4294669.117000] pnp: 00:00: ioport range 0xff00-0xff7f has been reserved
[4294669.118000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[4294669.118000] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[4294669.118000]   IO window: 00003400-000034ff
[4294669.118000]   IO window: 00003800-000038ff
[4294669.118000]   PREFETCH window: 30000000-31ffffff
[4294669.118000]   MEM window: 34000000-35ffffff
[4294669.118000] PCI: Bridge: 0000:00:1e.0
[4294669.118000]   IO window: 3000-3fff
[4294669.118000]   MEM window: b0100000-b01fffff
[4294669.118000]   PREFETCH window: 30000000-31ffffff
[4294669.118000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294669.118000] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294669.118000] Simple Boot Flag at 0x36 set to 0x1
[4294669.118000] audit: initializing netlink socket (disabled)
[4294669.118000] audit(1150192573.116:1): initialized
[4294669.118000] VFS: Disk quotas dquot_6.5.1
[4294669.118000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294669.118000] Initializing Cryptographic API
[4294669.118000] io scheduler noop registered
[4294669.118000] io scheduler anticipatory registered
[4294669.118000] io scheduler deadline registered
[4294669.119000] io scheduler cfq registered
[4294669.119000] isapnp: Scanning for PnP cards...
[4294669.476000] isapnp: No Plug & Play device found
[4294669.492000] Real Time Clock Driver v1.12
[4294669.492000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294669.492000] i8042.c: Detected active multiplexing controller, rev 1.1.
[4294669.493000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[4294669.493000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[4294669.493000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[4294669.493000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[4294669.493000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294669.493000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294669.495000] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 177
[4294669.495000] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[4294669.495000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294669.495000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294669.495000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294669.495000] mice: PS/2 mouse device common for all mice
[4294669.496000] EISA: Probing bus 0 at eisa.0
[4294669.496000] Cannot allocate resource for EISA slot 1
[4294669.496000] Cannot allocate resource for EISA slot 2
[4294669.496000] Cannot allocate resource for EISA slot 3
[4294669.496000] EISA: Detected 0 cards.
[4294669.496000] NET: Registered protocol family 2
[4294669.505000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[4294669.505000] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[4294669.505000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[4294669.505000] TCP: Hash tables configured (established 16384 bind 16384)
[4294669.505000] TCP reno registered
[4294669.505000] TCP bic registered
[4294669.505000] NET: Registered protocol family 1
[4294669.505000] NET: Registered protocol family 8
[4294669.505000] NET: Registered protocol family 20
[4294669.505000] Using IPI No-Shortcut mode
[4294669.505000] ACPI wakeup devices: 
[4294669.505000] USB1 USB2 USB3 USB4 USB7 ELAN MODM 
[4294669.505000] ACPI: (supports S0 S3 S4 S5)
[4294669.505000] Freeing unused kernel memory: 332k freed
[4294669.550000] vga16fb: initializing
[4294669.550000] vga16fb: mapped to 0xc00a0000
[4294669.670000] Console: switching to colour frame buffer device 80x25
[4294669.670000] fb0: VGA16 VGA frame buffer device
[4294670.105000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294670.759000] Capability LSM initialized
[4294670.788000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[4294671.228000] SCSI subsystem initialized
[4294671.230000] ACPI: bus type scsi registered
[4294671.230000] libata version 1.20 loaded.
[4294671.231000] ahci 0000:00:1f.2: version 1.2
[4294671.231000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
[4294671.231000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[4294671.231000] ahci: probe of 0000:00:1f.2 failed with error -12
[4294671.233000] ata_piix 0000:00:1f.2: version 1.05
[4294671.233000] ata_pci_init_one: pci_dev class+intf: 0x10180
[4294671.233000] ata_pci_init_one: NO_LEGACY == 0
[4294671.233000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
[4294671.233000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294671.233000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
[4294671.442000] ata1: dev 0 cfg 00:0040 49:2f00 82:7c6b 83:5909 84:6003 85:7c69 86:1809 87:6003 88:203f 93:604b
[4294671.442000] ata1: dev 0 ATA-6, max UDMA/100, 156301488 sectors: LBA
[4294671.442000] ata1(0): applying bridge limits
[4294671.442000] ata_acpi_push_id: skipping for PATA mode
[4294671.442000] ata1: dev 0 configured for UDMA/100
[4294671.442000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294671.442000] pata_get_dev_handle: dev_handle: 0xdf6c1660, parent_handle: 0xdf6c8520
[4294671.442000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdf6cbc00, *handle=0xdf6c1660
[4294671.442000] do_drive_get_GTF:   drive w/ adr=0: v: 0xdf6c1e00
[4294671.443000] scsi0 : ata_piix
[4294671.443000]   Vendor: ATA       Model: TOSHIBA MK8026GA  Rev: PA00
[4294671.443000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[4294671.444000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294671.444000] pata_get_dev_handle: dev_handle: 0xdf6c1660, parent_handle: 0xdf6c8520
[4294671.444000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdf6cbc00, *handle=0xdf6c1660
[4294671.444000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
[4294671.854000] ata2: dev 0 cfg 00:85c0 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 93:4000
[4294671.854000] ata2: dev 0 ATAPI, max UDMA/33
[4294671.854000] ata2(0): applying bridge limits
[4294671.854000] ata_acpi_push_id: skipping for PATA mode
[4294671.854000] ata2: dev 0 configured for UDMA/33
[4294671.854000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294671.854000] pata_get_dev_handle: dev_handle: 0xdf6c1660, parent_handle: 0xdf6c8520
[4294671.854000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdf6cbc00, *handle=0xdf6c1660
[4294671.854000] do_drive_get_GTF:   drive w/ adr=0: v: 0xdf6c1cc0
[4294671.855000] scsi1 : ata_piix
[4294671.857000]   Vendor: MATSHITA  Model: DVD-RAM UJ-831S   Rev: 1.90
[4294671.857000]   Type:   CD-ROM                             ANSI SCSI revision: 05
[4294671.858000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294671.858000] pata_get_dev_handle: dev_handle: 0xdf6c1660, parent_handle: 0xdf6c8520
[4294671.858000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdf6cbc00, *handle=0xdf6c1660
[4294671.866000] Driver 'sd' needs updating - please use bus_type methods
[4294671.881000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[4294671.881000] SCSI device sda: drive cache: write back
[4294671.884000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[4294671.884000] SCSI device sda: drive cache: write back
[4294671.884000]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[4294672.074000] sd 0:0:0:0: Attached scsi disk sda
[4294672.594000] usbcore: registered new driver usbfs
[4294672.595000] usbcore: registered new driver hub
[4294672.596000] USB Universal Host Controller Interface driver v2.3
[4294672.596000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 201
[4294672.596000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294672.596000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294672.597000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294672.597000] uhci_hcd 0000:00:1d.0: irq 201, io base 0x00001820
[4294672.599000] hub 1-0:1.0: USB hub found
[4294672.599000] hub 1-0:1.0: 2 ports detected
[4294672.670000] ieee1394: Initialized config rom entry `ip1394'
[4294672.700000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
[4294672.700000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294672.700000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294672.700000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294672.700000] uhci_hcd 0000:00:1d.1: irq 185, io base 0x00001840
[4294672.700000] hub 2-0:1.0: USB hub found
[4294672.700000] hub 2-0:1.0: 2 ports detected
[4294672.801000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
[4294672.801000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294672.801000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294672.801000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294672.801000] uhci_hcd 0000:00:1d.2: irq 209, io base 0x00001860
[4294672.802000] hub 3-0:1.0: USB hub found
[4294672.802000] hub 3-0:1.0: 2 ports detected
[4294672.903000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[4294672.903000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294672.903000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294672.903000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294672.903000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001880
[4294672.904000] hub 4-0:1.0: USB hub found
[4294672.904000] hub 4-0:1.0: 2 ports detected
[4294673.007000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[4294673.007000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201
[4294673.007000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294673.007000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294673.007000] ehci_hcd 0000:00:1d.7: debug port 1
[4294673.007000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294673.007000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294673.007000] ehci_hcd 0000:00:1d.7: irq 201, io mem 0xb0040000
[4294673.011000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294673.012000] hub 5-0:1.0: USB hub found
[4294673.012000] hub 5-0:1.0: 8 ports detected
[4294673.114000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[4294673.114000] ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 18 (level, low) -> IRQ 209
[4294673.164000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[b0106800-b0106fff]  Max Packet=[2048]
[4294673.191000] ide0: I/O resource 0x1F0-0x1F7 not free.
[4294673.191000] ide0: ports already in use, skipping probe
[4294673.191000] ide1: I/O resource 0x170-0x177 not free.
[4294673.191000] ide1: ports already in use, skipping probe
[4294673.215000] Attempting manual resume
[4294673.223000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[4294673.223000] SGI XFS Quota Management subsystem
[4294673.224000] XFS mounting filesystem sda8
[4294673.365000] Ending clean XFS mount for filesystem: sda8
[4294673.507000] usb 2-1: new low speed USB device using uhci_hcd and address 3
[4294675.112000] irq 209: nobody cared (try booting with the "irqpoll" option)
[4294675.112000]  [<c014c73a>] __report_bad_irq+0x2a/0xa0
[4294675.112000]  [<c014befd>] handle_IRQ_event+0x3d/0x70
[4294675.112000]  [<c014c857>] note_interrupt+0x87/0xf0
[4294675.112000]  [<c014c02d>] __do_IRQ+0xfd/0x110
[4294675.112000]  [<c0105c99>] do_IRQ+0x19/0x30
[4294675.112000]  [<c0103ef6>] common_interrupt+0x1a/0x20
[4294675.112000]  [<e0082e9b>] acpi_processor_idle+0x184/0x32d [processor]
[4294675.112000]  [<c010111f>] cpu_idle+0x6f/0xc0
[4294675.112000]  [<c03a8a3a>] start_kernel+0x19a/0x200
[4294675.112000]  [<c03a83c0>] unknown_bootoption+0x0/0x1f0
[4294675.112000] handlers:
[4294675.112000] [<e0127cf0>] (usb_hcd_irq+0x0/0x70 [usbcore])
[4294675.112000] Disabling IRQ #209
[4294680.406000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294680.406000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[4294680.440000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[4294680.440000] Uniform CD-ROM driver Revision: 3.20
[4294680.440000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[4294681.357000] usbcore: registered new driver hiddev
[4294681.380000] input: Microsoft Basic Optical Mouse as /class/input/input1
[4294681.380000] input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.1-1
[4294681.380000] usbcore: registered new driver usbhid
[4294681.380000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294681.437000] hw_random hardware driver 1.0.0 loaded
[4294681.465000] Linux agpgart interface v0.101 (c) Dave Jones
[4294681.471000] agpgart: Detected an Intel 915GM Chipset.
[4294681.471000] agpgart: Detected 7932K stolen memory.
[4294681.496000] agpgart: AGP aperture is 256M @ 0xc0000000
[4294681.740000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 217
[4294681.740000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[4294681.815000] 8139too Fast Ethernet driver 0.9.27
[4294681.962000] ieee80211_crypt: registered algorithm 'NULL'
[4294681.963000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4294681.963000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4294681.981000] input: PS/2 Mouse as /class/input/input2
[4294681.999000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[4294682.002000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1
[4294682.002000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[4294682.002000] Warning: PCI driver ipw2200 has a struct device_driver shutdown method, please update!
[4294682.183000] ts: Compaq touchscreen protocol output
[4294682.518000] sdhci: Secure Digital Host Controller Interface driver, 0.10
[4294682.518000] sdhci: Copyright(c) Pierre Ossman
[4294682.552000] intel8x0_measure_ac97_clock: measured 50406 usecs
[4294682.552000] intel8x0: clocking to 48000
[4294682.553000] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294682.553000] Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00]
[4294682.553000] Yenta: Enabling burst memory read transactions
[4294682.553000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294682.553000] Yenta: Routing CardBus interrupts to PCI
[4294682.553000] Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x66
[4294682.553000] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 22 (level, low) -> IRQ 225
[4294682.553000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[4294682.553000] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 233
[4294682.790000] Yenta: ISA IRQ mask 0x04f8, PCI irq 169
[4294682.790000] Socket status: 30000006
[4294682.790000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[4294682.790000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[4294682.790000] cs: IO port probe 0x3000-0x3fff: clean.
[4294682.791000] pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff
[4294682.791000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
[4294683.090000] ipw2200: Radio Frequency Kill Switch is On:
[4294683.090000] Kill switch must be turned off for wireless networking to work.
[4294683.090000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[4294683.091000] eth1: RealTek RTL8139 at 0xe041c000, 00:0f:b0:8e:cb:cc, IRQ 233
[4294683.091000] eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
[4294683.097000] ACPI: PCI Interrupt 0000:06:04.4[D] -> GSI 19 (level, low) -> IRQ 185
[4294683.133000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294683.149000] sdhci: ============== REGISTER DUMP ==============
[4294683.149000] sdhci: Sys addr: 0x00000000 | Version:  0x00008400
[4294683.149000] sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
[4294683.149000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294683.149000] sdhci: Present:  0x00020000 | Host ctl: 0x00000000
[4294683.149000] sdhci: Power:    0x00000000 | Blk gap:  0x00000000
[4294683.149000] sdhci: Walk up:  0x00000000 | Clock:    0x00000002
[4294683.149000] sdhci: Timeout:  0x0000000e | Int stat: 0x00000000
[4294683.149000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[4294683.149000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294683.149000] sdhci: Caps:     0x01821090 | Max curr: 0x00000000
[4294683.149000] sdhci: ===========================================
[4294683.199000] mmc0: SDHCI at 0xb0109400 irq 185 DMA
[4294683.299000] sdhci: ============== REGISTER DUMP ==============
[4294683.299000] sdhci: Sys addr: 0x00000000 | Version:  0x00008400
[4294683.299000] sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
[4294683.299000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294683.299000] sdhci: Present:  0x00020000 | Host ctl: 0x00000000
[4294683.299000] sdhci: Power:    0x00000000 | Blk gap:  0x00000000
[4294683.299000] sdhci: Walk up:  0x00000000 | Clock:    0x00000002
[4294683.299000] sdhci: Timeout:  0x0000000e | Int stat: 0x00000000
[4294683.299000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[4294683.299000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294683.299000] sdhci: Caps:     0x01821090 | Max curr: 0x00000000
[4294683.299000] sdhci: ===========================================
[4294683.349000] mmc1: SDHCI at 0xb0109000 irq 185 DMA
[4294683.466000] sdhci: ============== REGISTER DUMP ==============
[4294683.466000] sdhci: Sys addr: 0x00000000 | Version:  0x00008400
[4294683.466000] sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
[4294683.466000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294683.466000] sdhci: Present:  0x000a0000 | Host ctl: 0x00000000
[4294683.466000] sdhci: Power:    0x00000000 | Blk gap:  0x00000000
[4294683.466000] sdhci: Walk up:  0x00000000 | Clock:    0x00000002
[4294683.466000] sdhci: Timeout:  0x0000000e | Int stat: 0x00000000
[4294683.466000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[4294683.466000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294683.466000] sdhci: Caps:     0x01821898 | Max curr: 0x00000000
[4294683.466000] sdhci: ===========================================
[4294683.516000] mmc2: SDHCI at 0xb0106400 irq 185 DMA
[4294683.518000] cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
[4294683.519000] cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[4294683.520000] cs: IO port probe 0x820-0x8ff: clean.
[4294683.521000] cs: IO port probe 0xc00-0xcf7: clean.
[4294683.521000] cs: IO port probe 0xa00-0xaff: clean.
[4294684.030000] lp: driver loaded but no devices found
[4294684.325000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[4294684.325000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294684.325000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294684.459000] fuse init (API version 7.3)
[4294684.543000] Adding 979956k swap on /dev/sda3.  Priority:-1 extents:1 across:979956k
[4294685.739000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294685.739000] md: bitmap version 4.39
[4294687.349000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294689.862000] cdrom: open failed.
[4294697.921000] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[4294698.779000] ReiserFS: sda1: using ordered data mode
[4294698.780000] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[4294698.780000] ReiserFS: sda1: checking transaction log (sda1)
[4294698.850000] ReiserFS: sda1: Using r5 hash to sort names
[4294698.881000] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
[4294699.716000] ReiserFS: sda2: using ordered data mode
[4294699.716000] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[4294699.717000] ReiserFS: sda2: checking transaction log (sda2)
[4294699.758000] ReiserFS: sda2: Using r5 hash to sort names
[4294699.858000] kjournald starting.  Commit interval 5 seconds
[4294699.858000] EXT3 FS on sda9, internal journal
[4294699.858000] EXT3-fs: mounted filesystem with ordered data mode.
[4294701.764000] ACPI: AC Adapter [ACAD] (on-line)
[4294701.844000] ACPI: Battery Slot [BAT1] (battery present)
[4294701.896000] ACPI: Power Button (FF) [PWRF]
[4294701.896000] ACPI: Lid Switch [LID0]
[4294701.896000] ACPI: Power Button (CM) [PWRB]
[4294702.003000] ibm_acpi: ec object not found
[4294702.022000] pcc_acpi: loading...
[4294702.098000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[4294702.099000] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[4294705.683000] eth0: link down
[4294705.872000] ppdev: user-space parallel port driver
[4294707.829000] NET: Registered protocol family 10
[4294707.829000] lo: Disabled Privacy Extensions
[4294707.829000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[4294707.829000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4294707.829000] IPv6 over IPv4 tunneling driver
[4294709.260000] Bluetooth: Core ver 2.8
[4294709.260000] NET: Registered protocol family 31
[4294709.260000] Bluetooth: HCI device and connection manager initialized
[4294709.260000] Bluetooth: HCI socket layer initialized
[4294709.269000] Bluetooth: L2CAP ver 2.8
[4294709.269000] Bluetooth: L2CAP socket layer initialized
[4294709.291000] Bluetooth: RFCOMM socket layer initialized
[4294709.291000] Bluetooth: RFCOMM TTY layer initialized
[4294709.291000] Bluetooth: RFCOMM ver 1.7
[4294709.944000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294709.944000] apm: overridden by ACPI.
[4294714.050000] [drm] Initialized drm 1.0.1 20051102
[4294714.060000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294714.060000] [drm] Initialized i915 1.4.0 20060119 on minor 0
[4294772.853000] usb 2-1: USB disconnect, address 3
[4294780.439000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[4294780.903000] Initializing USB Mass Storage driver...
[4294780.904000] scsi2 : SCSI emulation for USB Mass Storage devices
[4294780.904000] usb-storage: device found at 2
[4294780.904000] usb-storage: waiting for device to settle before scanning
[4294780.905000] usbcore: registered new driver usb-storage
[4294780.905000] USB Mass Storage support registered.
[4294785.909000]   Vendor: SigmaTel  Model: MSCN              Rev: 0100
[4294785.909000]   Type:   Direct-Access                      ANSI SCSI revision: 04
[4294785.914000] SCSI device sdb: 501504 512-byte hdwr sectors (257 MB)
[4294785.917000] sdb: Write Protect is off
[4294785.917000] sdb: Mode Sense: 38 00 00 00
[4294785.917000] sdb: assuming drive cache: write through
[4294785.929000] SCSI device sdb: 501504 512-byte hdwr sectors (257 MB)
[4294785.932000] sdb: Write Protect is off
[4294785.932000] sdb: Mode Sense: 38 00 00 00
[4294785.932000] sdb: assuming drive cache: write through
[4294785.932000]  sdb: sdb1
[4294785.939000] sd 2:0:0:0: Attached scsi removable disk sdb
[4294785.939000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[4294785.941000] usb-storage: device scan complete
[4294789.885000] UDF-fs: No VRS found
[4294790.203000] UDF-fs: No VRS found
[4294790.673000] Unable to identify CD-ROM format.
[4294791.023000] Unable to identify CD-ROM format.
[4294791.086000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[4294807.655000] psmouse.c: GlidePoint at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away.