[4294667.296000] Linux version 2.6.15-22-686 (buildd@vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sun May 7 16:37:57 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable) [4294667.296000] BIOS-e820: 000000001f6e0000 - 000000001f6ea000 (ACPI data) [4294667.296000] BIOS-e820: 000000001f6ea000 - 000000001f700000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) [4294667.296000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) [4294667.296000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [4294667.296000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [4294667.296000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [4294667.296000] 0MB HIGHMEM available. [4294667.296000] 502MB LOWMEM available. [4294667.296000] On node 0 totalpages: 128736 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 124640 pages, LIFO batch:31 [4294667.296000] HighMem zone: 0 pages, LIFO batch:0 [4294667.296000] DMI present. [4294667.296000] ACPI: RSDP (v000 TOSCPL ) @ 0x000f6b70 [4294667.296000] ACPI: RSDT (v001 TOSCPL RSDT 0x06040000 LTP 0x00000000) @ 0x1f6e33f6 [4294667.296000] ACPI: MADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1f6e9e88 [4294667.296000] ACPI: FADT (v001 TOSCPL ALVISO 0x06040000 LOHR 0x00000032) @ 0x1f6e9ef0 [4294667.296000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1f6e9fd8 [4294667.296000] ACPI: MCFG (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1f6e9f9c [4294667.296000] ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20030224) @ 0x1f6e430c [4294667.296000] ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20030224) @ 0x1f6e3c7a [4294667.296000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x1f6e3835 [4294667.296000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1f6e3657 [4294667.296000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1f6e343e [4294667.296000] ACPI: DSDT (v001 TOSCPL ALVISO 0x06040000 MSFT 0x0100000e) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x1008 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [4294667.296000] Processor #0 6:13 APIC version 20 [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/sda8 ro splash=silent quiet [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes) [4294667.296000] Detected 1596.187 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294670.122000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [4294670.123000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [4294670.136000] Memory: 499072k/514944k available (2093k kernel code, 15276k reserved, 589k data, 332k init, 0k highmem) [4294670.136000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294670.196000] Calibrating delay using timer specific routine.. 3195.30 BogoMIPS (lpj=1597653) [4294670.196000] Security Framework v1.0.0 initialized [4294670.196000] SELinux: Disabled at boot. [4294670.196000] Mount-cache hash table entries: 512 [4294670.196000] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000 [4294670.196000] CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000 [4294670.196000] CPU: L1 I cache: 32K, L1 D cache: 32K [4294670.196000] CPU: L2 cache: 2048K [4294670.196000] CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000 [4294670.196000] mtrr: v2.0 (20020519) [4294670.196000] Enabling fast FPU save and restore... done. [4294670.196000] Enabling unmasked SIMD FPU exception support... done. [4294670.196000] Checking 'hlt' instruction... OK. [4294670.200000] SMP alternatives: switching to UP code [4294670.200000] checking if image is initramfs... it is [4294670.816000] Freeing initrd memory: 6606k freed [4294670.823000] ACPI: Looking for DSDT ... not found! [4294670.866000] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08 [4294670.866000] Total of 1 processors activated (3195.30 BogoMIPS). [4294670.866000] ENABLING IO-APIC IRQs [4294670.866000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [4294670.977000] Brought up 1 CPUs [4294670.977000] NET: Registered protocol family 16 [4294670.977000] EISA bus registered [4294670.977000] ACPI: bus type pci registered [4294670.977000] PCI: PCI BIOS revision 2.10 entry at 0xfd954, last bus=7 [4294670.977000] PCI: Using MMCONFIG [4294670.978000] ACPI: Subsystem revision 20051216 [4294670.980000] ACPI: Interpreter enabled [4294670.980000] ACPI: Using IOAPIC for interrupt routing [4294670.980000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294670.980000] PCI: Probing PCI hardware (bus 00) [4294671.003000] Boot video device is 0000:00:02.0 [4294671.003000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [4294671.003000] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [4294671.003000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 [4294671.004000] PCI: Transparent bridge - 0000:00:1e.0 [4294671.004000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294671.011000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [4294671.012000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [4294671.013000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [4294671.013000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [4294671.013000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [4294671.013000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [4294671.014000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [4294671.014000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [4294671.014000] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [4294671.014000] ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode. [4294671.056000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294671.056000] pnp: PnP ACPI init [4294671.078000] pnp: PnP ACPI: found 9 devices [4294671.078000] PnPBIOS: Disabled by ACPI PNP [4294671.078000] PCI: Using ACPI for IRQ routing [4294671.078000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294671.097000] pnp: 00:00: ioport range 0xfe00-0xfe7f has been reserved [4294671.097000] pnp: 00:00: ioport range 0xfe80-0xfeff has been reserved [4294671.097000] pnp: 00:00: ioport range 0xff00-0xff7f has been reserved [4294671.098000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 [4294671.098000] PCI: Bus 7, cardbus bridge: 0000:06:04.0 [4294671.098000] IO window: 00003400-000034ff [4294671.098000] IO window: 00003800-000038ff [4294671.098000] PREFETCH window: 30000000-31ffffff [4294671.098000] MEM window: 34000000-35ffffff [4294671.098000] PCI: Bridge: 0000:00:1e.0 [4294671.098000] IO window: 3000-3fff [4294671.098000] MEM window: b0100000-b01fffff [4294671.098000] PREFETCH window: 30000000-31ffffff [4294671.098000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [4294671.098000] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 169 [4294671.098000] Simple Boot Flag at 0x36 set to 0x1 [4294671.098000] audit: initializing netlink socket (disabled) [4294671.098000] audit(1147546035.096:1): initialized [4294671.098000] VFS: Disk quotas dquot_6.5.1 [4294671.098000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294671.098000] Initializing Cryptographic API [4294671.098000] io scheduler noop registered [4294671.098000] io scheduler anticipatory registered [4294671.098000] io scheduler deadline registered [4294671.099000] io scheduler cfq registered [4294671.099000] isapnp: Scanning for PnP cards... [4294671.456000] isapnp: No Plug & Play device found [4294671.472000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [4294671.472000] i8042.c: Detected active multiplexing controller, rev 1.1. [4294671.473000] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [4294671.473000] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [4294671.473000] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [4294671.473000] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [4294671.473000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294671.473000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294671.475000] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 177 [4294671.475000] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [4294671.475000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294671.475000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294671.475000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294671.475000] mice: PS/2 mouse device common for all mice [4294671.476000] EISA: Probing bus 0 at eisa.0 [4294671.476000] Cannot allocate resource for EISA slot 1 [4294671.476000] Cannot allocate resource for EISA slot 2 [4294671.476000] Cannot allocate resource for EISA slot 3 [4294671.476000] EISA: Detected 0 cards. [4294671.476000] NET: Registered protocol family 2 [4294671.485000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [4294671.485000] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [4294671.485000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes) [4294671.485000] TCP: Hash tables configured (established 16384 bind 16384) [4294671.485000] TCP reno registered [4294671.485000] TCP bic registered [4294671.485000] NET: Registered protocol family 1 [4294671.485000] NET: Registered protocol family 8 [4294671.485000] NET: Registered protocol family 20 [4294671.485000] Using IPI No-Shortcut mode [4294671.485000] ACPI wakeup devices: [4294671.485000] USB1 USB2 USB3 USB4 USB7 ELAN MODM [4294671.485000] ACPI: (supports S0 S3 S4 S5) [4294671.486000] Freeing unused kernel memory: 332k freed [4294671.551000] vga16fb: initializing [4294671.551000] vga16fb: mapped to 0xc00a0000 [4294671.671000] Console: switching to colour frame buffer device 80x25 [4294671.671000] fb0: VGA16 VGA frame buffer device [4294672.088000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294672.808000] Capability LSM initialized [4294672.837000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [4294673.260000] SCSI subsystem initialized [4294673.261000] ACPI: bus type scsi registered [4294673.261000] libata version 1.20 loaded. [4294673.262000] ahci 0000:00:1f.2: version 1.2 [4294673.262000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185 [4294673.262000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [4294673.262000] ahci: probe of 0000:00:1f.2 failed with error -12 [4294673.263000] ata_piix 0000:00:1f.2: version 1.05 [4294673.263000] ata_pci_init_one: pci_dev class+intf: 0x10180 [4294673.263000] ata_pci_init_one: NO_LEGACY == 0 [4294673.264000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185 [4294673.264000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [4294673.264000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14 [4294673.474000] ata1: dev 0 cfg 00:0040 49:2f00 82:7c6b 83:5909 84:6003 85:7c69 86:1809 87:6003 88:203f 93:604b [4294673.474000] ata1: dev 0 ATA-6, max UDMA/100, 156301488 sectors: LBA [4294673.474000] ata1(0): applying bridge limits [4294673.474000] ata_acpi_push_id: skipping for PATA mode [4294673.474000] ata1: dev 0 configured for UDMA/100 [4294673.474000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2' [4294673.474000] pata_get_dev_handle: dev_handle: 0xdf6c0660, parent_handle: 0xdf6c7520 [4294673.474000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdf6cbc00, *handle=0xdf6c0660 [4294673.474000] do_drive_get_GTF: drive w/ adr=0: v: 0xdf6c0e00 [4294673.475000] scsi0 : ata_piix [4294673.475000] Vendor: ATA Model: TOSHIBA MK8026GA Rev: PA00 [4294673.475000] Type: Direct-Access ANSI SCSI revision: 05 [4294673.476000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2' [4294673.476000] pata_get_dev_handle: dev_handle: 0xdf6c0660, parent_handle: 0xdf6c7520 [4294673.476000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdf6cbc00, *handle=0xdf6c0660 [4294673.476000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15 [4294673.887000] ata2: dev 0 cfg 00:85c0 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 93:4000 [4294673.887000] ata2: dev 0 ATAPI, max UDMA/33 [4294673.887000] ata2(0): applying bridge limits [4294673.887000] ata_acpi_push_id: skipping for PATA mode [4294673.887000] ata2: dev 0 configured for UDMA/33 [4294673.887000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2' [4294673.887000] pata_get_dev_handle: dev_handle: 0xdf6c0660, parent_handle: 0xdf6c7520 [4294673.887000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdf6cbc00, *handle=0xdf6c0660 [4294673.887000] do_drive_get_GTF: drive w/ adr=0: v: 0xdf6c0cc0 [4294673.888000] scsi1 : ata_piix [4294673.890000] Vendor: MATSHITA Model: DVD-RAM UJ-831S Rev: 1.90 [4294673.890000] Type: CD-ROM ANSI SCSI revision: 05 [4294673.891000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2' [4294673.891000] pata_get_dev_handle: dev_handle: 0xdf6c0660, parent_handle: 0xdf6c7520 [4294673.891000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdf6cbc00, *handle=0xdf6c0660 [4294673.899000] Driver 'sd' needs updating - please use bus_type methods [4294673.900000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [4294673.901000] SCSI device sda: drive cache: write back [4294673.902000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [4294673.903000] SCSI device sda: drive cache: write back [4294673.903000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > [4294674.113000] sd 0:0:0:0: Attached scsi disk sda [4294674.640000] usbcore: registered new driver usbfs [4294674.640000] usbcore: registered new driver hub [4294674.642000] USB Universal Host Controller Interface driver v2.3 [4294674.642000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 201 [4294674.642000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [4294674.642000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [4294674.643000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [4294674.643000] uhci_hcd 0000:00:1d.0: irq 201, io base 0x00001820 [4294674.644000] hub 1-0:1.0: USB hub found [4294674.644000] hub 1-0:1.0: 2 ports detected [4294674.746000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185 [4294674.746000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [4294674.746000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [4294674.746000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [4294674.746000] uhci_hcd 0000:00:1d.1: irq 185, io base 0x00001840 [4294674.746000] hub 2-0:1.0: USB hub found [4294674.746000] hub 2-0:1.0: 2 ports detected [4294674.847000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209 [4294674.847000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [4294674.847000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [4294674.847000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [4294674.847000] uhci_hcd 0000:00:1d.2: irq 209, io base 0x00001860 [4294674.848000] hub 3-0:1.0: USB hub found [4294674.848000] hub 3-0:1.0: 2 ports detected [4294674.949000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169 [4294674.949000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [4294674.949000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [4294674.949000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [4294674.949000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001880 [4294674.950000] hub 4-0:1.0: USB hub found [4294674.950000] hub 4-0:1.0: 2 ports detected [4294675.053000] usb 2-1: new low speed USB device using uhci_hcd and address 2 [4294675.053000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201 [4294675.053000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [4294675.053000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [4294675.053000] ehci_hcd 0000:00:1d.7: debug port 1 [4294675.053000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [4294675.053000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [4294675.053000] ehci_hcd 0000:00:1d.7: irq 201, io mem 0xb0040000 [4294675.057000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294675.058000] hub 5-0:1.0: USB hub found [4294675.058000] hub 5-0:1.0: 8 ports detected [4294675.177000] ide0: I/O resource 0x1F0-0x1F7 not free. [4294675.177000] ide0: ports already in use, skipping probe [4294675.177000] ide1: I/O resource 0x170-0x177 not free. [4294675.177000] ide1: ports already in use, skipping probe [4294675.201000] Attempting manual resume [4294675.208000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [4294675.208000] SGI XFS Quota Management subsystem [4294675.209000] XFS mounting filesystem sda8 [4294675.359000] Ending clean XFS mount for filesystem: sda8 [4294675.553000] usb 2-1: new low speed USB device using uhci_hcd and address 3 [4294682.031000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4294682.031000] 1:0:0:0: Attached scsi generic sg1 type 5 [4294682.069000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [4294682.069000] Uniform CD-ROM driver Revision: 3.20 [4294682.069000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [4294682.829000] Linux agpgart interface v0.101 (c) Dave Jones [4294682.855000] agpgart: Detected an Intel 915GM Chipset. [4294682.855000] agpgart: Detected 7932K stolen memory. [4294682.872000] agpgart: AGP aperture is 256M @ 0xc0000000 [4294683.295000] Real Time Clock Driver v1.12 [4294683.389000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 217 [4294683.389000] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [4294683.775000] input: PS/2 Mouse as /class/input/input1 [4294683.794000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 [4294683.810000] ts: Compaq touchscreen protocol output [4294684.140000] hw_random hardware driver 1.0.0 loaded [4294684.201000] intel8x0_measure_ac97_clock: measured 1386793941 usecs [4294684.201000] intel8x0: measured clock 1 rejected [4294684.201000] intel8x0: clocking to 48000 [4294684.225000] usbcore: registered new driver hiddev [4294684.274000] input: Microsoft Basic Optical Mouse as /class/input/input3 [4294684.277000] input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.1-1 [4294684.277000] usbcore: registered new driver usbhid [4294684.277000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [4294684.724000] sdhci: Secure Digital Host Controller Interface driver, 0.10 [4294684.724000] sdhci: Copyright(c) Pierre Ossman [4294684.724000] ACPI: PCI Interrupt 0000:06:04.4[D] -> GSI 19 (level, low) -> IRQ 185 [4294684.772000] ieee80211_crypt: registered algorithm 'NULL' [4294684.774000] sdhci: ============== REGISTER DUMP ============== [4294684.774000] sdhci: Sys addr: 0x00000000 | Version: 0x00008400 [4294684.774000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [4294684.774000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [4294684.774000] sdhci: Present: 0x00020000 | Host ctl: 0x00000000 [4294684.774000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [4294684.774000] sdhci: Walk up: 0x00000000 | Clock: 0x00000002 [4294684.774000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [4294684.774000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf [4294684.774000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [4294684.774000] sdhci: Caps: 0x01821090 | Max curr: 0x00000000 [4294684.774000] sdhci: =========================================== [4294684.825000] mmc0: SDHCI at 0xb0109400 irq 185 DMA [4294684.913000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [4294684.913000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [4294684.925000] sdhci: ============== REGISTER DUMP ============== [4294684.925000] sdhci: Sys addr: 0x00000000 | Version: 0x00008400 [4294684.925000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [4294684.925000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [4294684.925000] sdhci: Present: 0x00020000 | Host ctl: 0x00000000 [4294684.925000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [4294684.925000] sdhci: Walk up: 0x00000000 | Clock: 0x00000002 [4294684.925000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [4294684.925000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf [4294684.925000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [4294684.925000] sdhci: Caps: 0x01821090 | Max curr: 0x00000000 [4294684.925000] sdhci: =========================================== [4294684.975000] mmc1: SDHCI at 0xb0109000 irq 185 DMA [4294685.075000] sdhci: ============== REGISTER DUMP ============== [4294685.075000] sdhci: Sys addr: 0x00000000 | Version: 0x00008400 [4294685.075000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [4294685.075000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [4294685.075000] sdhci: Present: 0x000a0000 | Host ctl: 0x00000000 [4294685.075000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [4294685.075000] sdhci: Walk up: 0x00000000 | Clock: 0x00000002 [4294685.075000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [4294685.075000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf [4294685.075000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [4294685.075000] sdhci: Caps: 0x01821898 | Max curr: 0x00000000 [4294685.075000] sdhci: =========================================== [4294685.125000] mmc2: SDHCI at 0xb0106400 irq 185 DMA [4294685.249000] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 169 [4294685.249000] Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00] [4294685.250000] Yenta: Enabling burst memory read transactions [4294685.250000] Yenta: Using CSCINT to route CSC interrupts to PCI [4294685.250000] Yenta: Routing CardBus interrupts to PCI [4294685.250000] Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x66 [4294685.321000] ieee1394: Initialized config rom entry `ip1394' [4294685.374000] 8139too Fast Ethernet driver 0.9.27 [4294685.375000] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 225 [4294685.375000] eth0: RealTek RTL8139 at 0xe03b6000, 00:0f:b0:8e:cb:cc, IRQ 225 [4294685.375000] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [4294685.434000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1 [4294685.434000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [4294685.434000] Warning: PCI driver ipw2200 has a struct device_driver shutdown method, please update! [4294685.435000] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 22 (level, low) -> IRQ 233 [4294685.435000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [4294685.474000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 169 [4294685.474000] Socket status: 30000006 [4294685.474000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [4294685.474000] cs: IO port probe 0x3000-0x3fff: clean. [4294685.474000] pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff [4294685.474000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff [4294685.480000] ohci1394: $Rev: 1313 $ Ben Collins [4294685.480000] ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 18 (level, low) -> IRQ 209 [4294685.531000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[b0106800-b0106fff] Max Packet=[2048] [4294685.544000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [4294685.787000] ipw2200: Radio Frequency Kill Switch is On: [4294685.787000] Kill switch must be turned off for wireless networking to work. [4294685.787000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [4294685.992000] cs: IO port probe 0x100-0x3af: excluding 0x370-0x377 [4294685.994000] cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 [4294685.995000] cs: IO port probe 0x820-0x8ff: clean. [4294685.995000] cs: IO port probe 0xc00-0xcf7: clean. [4294685.996000] cs: IO port probe 0xa00-0xaff: clean. [4294686.492000] lp: driver loaded but no devices found [4294686.526000] sbp2: $Rev: 1306 $ Ben Collins [4294686.526000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [4294686.526000] ieee1394: sbp2: Try serialize_io=0 for better performance [4294686.738000] fuse init (API version 7.3) [4294686.838000] Adding 979956k swap on /dev/sda3. Priority:-1 extents:1 across:979956k [4294687.443000] irq 209: nobody cared (try booting with the "irqpoll" option) [4294687.443000] [] __report_bad_irq+0x2a/0xa0 [4294687.443000] [] handle_IRQ_event+0x3d/0x70 [4294687.443000] [] note_interrupt+0x87/0xf0 [4294687.443000] [] __do_IRQ+0xfd/0x110 [4294687.443000] [] do_IRQ+0x19/0x30 [4294687.443000] [] common_interrupt+0x1a/0x20 [4294687.443000] [] acpi_processor_idle+0x184/0x32d [processor] [4294687.443000] [] cpu_idle+0x6f/0xc0 [4294687.443000] [] start_kernel+0x19a/0x200 [4294687.443000] [] unknown_bootoption+0x0/0x1f0 [4294687.443000] handlers: [4294687.443000] [] (usb_hcd_irq+0x0/0x70 [usbcore]) [4294687.443000] Disabling IRQ #209 [4294687.959000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294687.959000] md: bitmap version 4.39 [4294689.576000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [4294691.693000] cdrom: open failed. [4294701.716000] ReiserFS: sda1: found reiserfs format "3.6" with standard journal [4294702.546000] ReiserFS: sda1: using ordered data mode [4294702.547000] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [4294702.547000] ReiserFS: sda1: checking transaction log (sda1) [4294702.617000] ReiserFS: sda1: Using r5 hash to sort names [4294702.646000] ReiserFS: sda2: found reiserfs format "3.6" with standard journal [4294703.472000] ReiserFS: sda2: using ordered data mode [4294703.472000] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [4294703.473000] ReiserFS: sda2: checking transaction log (sda2) [4294703.503000] ReiserFS: sda2: Using r5 hash to sort names [4294703.517000] ReiserFS: sda6: found reiserfs format "3.6" with standard journal [4294704.410000] ReiserFS: sda6: using ordered data mode [4294704.410000] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [4294704.410000] ReiserFS: sda6: checking transaction log (sda6) [4294704.499000] ReiserFS: sda6: Using r5 hash to sort names [4294704.601000] kjournald starting. Commit interval 5 seconds [4294704.601000] EXT3 FS on sda9, internal journal [4294704.601000] EXT3-fs: mounted filesystem with ordered data mode. [4294706.702000] ACPI: AC Adapter [ACAD] (on-line) [4294706.763000] ACPI: Battery Slot [BAT1] (battery present) [4294706.815000] ACPI: Power Button (FF) [PWRF] [4294706.815000] ACPI: Lid Switch [LID0] [4294706.815000] ACPI: Power Button (CM) [PWRB] [4294706.920000] ibm_acpi: ec object not found [4294706.940000] pcc_acpi: loading... [4294707.032000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [4294707.032000] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) [4294708.329000] ppdev: user-space parallel port driver [4294711.385000] eth0: link down [4294711.751000] NET: Registered protocol family 10 [4294711.751000] lo: Disabled Privacy Extensions [4294711.751000] ADDRCONF(NETDEV_UP): eth0: link is not ready [4294711.751000] ADDRCONF(NETDEV_UP): eth1: link is not ready [4294711.751000] IPv6 over IPv4 tunneling driver [4294711.958000] Bluetooth: Core ver 2.8 [4294711.958000] NET: Registered protocol family 31 [4294711.958000] Bluetooth: HCI device and connection manager initialized [4294711.958000] Bluetooth: HCI socket layer initialized [4294711.970000] Bluetooth: L2CAP ver 2.8 [4294711.970000] Bluetooth: L2CAP socket layer initialized [4294711.995000] Bluetooth: RFCOMM socket layer initialized [4294711.995000] Bluetooth: RFCOMM TTY layer initialized [4294711.995000] Bluetooth: RFCOMM ver 1.7 [4294712.652000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [4294712.653000] apm: overridden by ACPI. [4294716.063000] [drm] Initialized drm 1.0.0 20040925 [4294716.066000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 [4294716.067000] [drm] Initialized i915 1.1.0 20040405 on minor 0: [4294716.068000] mtrr: base(0xc0020000) is not aligned on a size(0x640000) boundary [4294937.474000] mtrr: base(0xc0020000) is not aligned on a size(0x640000) boundary [4294944.279000] mtrr: base(0xc0020000) is not aligned on a size(0x640000) boundary [4294971.728000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). [4294971.728000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294971.786000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). [4294971.786000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294971.926000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). [4294971.926000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294971.971000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). [4294971.971000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294972.093000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). [4294972.093000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294972.143000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). [4294972.143000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294972.255000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). [4294972.255000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294972.295000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). [4294972.295000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294972.421000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). [4294972.421000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294972.449000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). [4294972.449000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294972.597000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). [4294972.597000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294972.628000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). [4294972.628000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294972.765000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). [4294972.765000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294972.799000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). [4294972.799000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294972.916000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). [4294972.916000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294972.961000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). [4294972.961000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294973.070000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). [4294973.070000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294973.123000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). [4294973.123000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294973.682000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). [4294973.682000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4294973.764000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). [4294973.764000] atkbd.c: Use 'setkeycodes e059 ' to make it known. [4295061.030000] loop: loaded (max 8 devices) [4298267.539000] psmouse.c: GlidePoint at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away. [4298416.143000] mtrr: base(0xc0020000) is not aligned on a size(0x640000) boundary [4298528.583000] mtrr: base(0xc0020000) is not aligned on a size(0x640000) boundary