[ 0.000000] Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000 (usable) [ 0.000000] BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7670 [ 0.000000] Entering add_active_range(0, 0, 521856) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521856 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521856 [ 0.000000] On node 0 totalpages: 521856 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2285 pages used for memmap [ 0.000000] HighMem zone: 290195 pages, LIFO batch:31 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F75E0, 0014 (r0 TOSCPL) [ 0.000000] ACPI: RSDT 7F687799, 0054 (r1 TOSCPL TOSCPL00 6040000 LTP 0) [ 0.000000] ACPI: FACP 7F68FC78, 0074 (r1 TOSCPL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: DSDT 7F689504, 6774 (r1 TOSCPL CALISTGA 6040000 INTL 20060608) [ 0.000000] ACPI: FACS 7F690FC0, 0040 [ 0.000000] ACPI: SLIC 7F68FCEC, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0) [ 0.000000] ACPI: APIC 7F68FE62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 7F68FECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7F68FF02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: BOOT 7F68FFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: APIC 7F68FF70, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: SSDT 7F688EB1, 064F (r1 SataRe SataPri 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F68881F, 0692 (r1 SataRe SataSec 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F687D79, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F687CD3, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6877ED, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Built 1 zonelists. Total pages: 517779 [ 0.000000] Kernel command line: root=UUID=474911ee-d8c8-4d61-b94a-95a83948ad05 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1729.129 MHz processor. [ 23.701073] Console: colour VGA+ 80x25 [ 23.701358] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 23.701743] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 23.816864] Memory: 2058040k/2087424k available (2017k kernel code, 28104k reserved, 918k data, 364k init, 1169920k highmem) [ 23.816874] virtual kernel memory layout: [ 23.816875] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 23.816877] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 23.816878] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 23.816879] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 23.816881] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 23.816882] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 23.816883] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 23.816887] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 23.816926] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 23.817075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 23.817080] hpet0: 3 64-bit timers, 14318180 Hz [ 23.898067] Calibrating delay using timer specific routine.. 3461.91 BogoMIPS (lpj=6923822) [ 23.898093] Security Framework v1.0.0 initialized [ 23.898101] SELinux: Disabled at boot. [ 23.898115] Mount-cache hash table entries: 512 [ 23.898248] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 [ 23.898256] monitor/mwait feature present. [ 23.898257] using mwait in idle threads. [ 23.898262] CPU: L1 I cache: 32K, L1 D cache: 32K [ 23.898265] CPU: L2 cache: 1024K [ 23.898267] CPU: Physical Processor ID: 0 [ 23.898269] CPU: Processor Core ID: 0 [ 23.898272] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 [ 23.898281] Compat vDSO mapped to ffffe000. [ 23.898296] Checking 'hlt' instruction... OK. [ 23.914183] SMP alternatives: switching to UP code [ 23.914656] Early unpacking initramfs... done [ 24.251661] ACPI: Core revision 20070126 [ 24.251730] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 24.275211] CPU0: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c [ 24.275230] SMP alternatives: switching to SMP code [ 24.275363] Booting processor 1/1 eip 3000 [ 24.285463] Initializing CPU#1 [ 24.365861] Calibrating delay using timer specific routine.. 3458.09 BogoMIPS (lpj=6916180) [ 24.365868] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 [ 24.365873] monitor/mwait feature present. [ 24.365877] CPU: L1 I cache: 32K, L1 D cache: 32K [ 24.365879] CPU: L2 cache: 1024K [ 24.365882] CPU: Physical Processor ID: 0 [ 24.365883] CPU: Processor Core ID: 1 [ 24.365885] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 [ 24.366317] CPU1: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c [ 24.366342] Total of 2 processors activated (6920.00 BogoMIPS). [ 24.366542] ENABLING IO-APIC IRQs [ 24.366751] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 24.513896] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 24.533908] Brought up 2 CPUs [ 24.635479] migration_cost=59 [ 24.635619] Booting paravirtualized kernel on bare hardware [ 24.635712] Time: 10:34:37 Date: 08/26/107 [ 24.635732] NET: Registered protocol family 16 [ 24.635824] EISA bus registered [ 24.635829] ACPI: bus type pci registered [ 24.635971] PCI: BIOS BUG #81[49435000] found [ 24.636028] PCI: Using configuration type 1 [ 24.636030] Setting up standard PCI resources [ 24.640645] ACPI: EC: Look up EC in DSDT [ 24.641393] ACPI: EC: GPE=0x19, ports=0x66, 0x62 [ 24.646089] ACPI: System BIOS is requesting _OSI(Linux) [ 24.646092] ACPI: Please test with "acpi_osi=!Linux" [ 24.646093] Please send dmidecode to linux-acpi@vger.kernel.org [ 24.646397] ACPI: Interpreter enabled [ 24.646400] ACPI: (supports S0 S3 S4 S5) [ 24.646417] ACPI: Using IOAPIC for interrupt routing [ 24.694697] ACPI: EC: GPE=0x19, ports=0x66, 0x62 [ 24.694760] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 24.694769] PCI: Probing PCI hardware (bus 00) [ 24.695525] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 24.695529] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 24.696526] PCI: Transparent bridge - 0000:00:1e.0 [ 24.696663] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 24.696983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 24.697118] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 24.697252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 24.697396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 24.704280] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 24.704384] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 24.704486] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 24.704587] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 24.704687] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 24.704789] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 24.704891] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 24.704991] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 24.705117] Linux Plug and Play Support v0.97 (c) Adam Belay [ 24.705127] pnp: PnP ACPI init [ 24.705139] ACPI: bus type pnp registered [ 24.725940] pnp: PnP ACPI: found 10 devices [ 24.725943] ACPI: ACPI bus type pnp unregistered [ 24.725946] PnPBIOS: Disabled by ACPI PNP [ 24.725996] PCI: Using ACPI for IRQ routing [ 24.725999] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 24.726110] NET: Registered protocol family 8 [ 24.726112] NET: Registered protocol family 20 [ 24.726173] pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved [ 24.726176] pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved [ 24.726179] pnp: 00:01: ioport range 0xff00-0xff7f has been reserved [ 24.726183] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 24.726186] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 24.726190] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 24.726193] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 24.726200] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 24.729710] Time: tsc clocksource has been installed. [ 24.729726] Switched to high resolution mode on CPU 0 [ 24.729816] Switched to high resolution mode on CPU 1 [ 24.756509] PCI: Bridge: 0000:00:1c.0 [ 24.756513] IO window: 2000-2fff [ 24.756520] MEM window: d6000000-d7ffffff [ 24.756525] PREFETCH window: d0000000-d1ffffff [ 24.756531] PCI: Bridge: 0000:00:1c.1 [ 24.756534] IO window: 3000-3fff [ 24.756541] MEM window: d8000000-d9ffffff [ 24.756545] PREFETCH window: d2000000-d3ffffff [ 24.756552] PCI: Bridge: 0000:00:1c.2 [ 24.756555] IO window: 4000-4fff [ 24.756562] MEM window: da000000-dbffffff [ 24.756566] PREFETCH window: d4000000-d5ffffff [ 24.756579] PCI: Bus 7, cardbus bridge: 0000:06:04.0 [ 24.756582] IO window: 00005000-000050ff [ 24.756587] IO window: 00005400-000054ff [ 24.756592] PREFETCH window: 88000000-8bffffff [ 24.756598] MEM window: 8c000000-8fffffff [ 24.756603] PCI: Bridge: 0000:00:1e.0 [ 24.756606] IO window: 5000-5fff [ 24.756612] MEM window: dc000000-dc0fffff [ 24.756617] PREFETCH window: 88000000-8bffffff [ 24.756649] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 24.756657] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 24.756682] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 [ 24.756689] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 24.756713] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 24.756720] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 24.756734] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 24.756752] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 24.756767] NET: Registered protocol family 2 [ 24.805669] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 24.805744] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 24.806826] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 24.807212] TCP: Hash tables configured (established 131072 bind 65536) [ 24.807216] TCP reno registered [ 24.821797] checking if image is initramfs... it is [ 25.491852] Freeing initrd memory: 7046k freed [ 25.491975] Simple Boot Flag at 0x36 set to 0x1 [ 25.492504] audit: initializing netlink socket (disabled) [ 25.492519] audit(1190802877.272:1): initialized [ 25.492620] highmem bounce pool size: 64 pages [ 25.494729] VFS: Disk quotas dquot_6.5.1 [ 25.494782] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 25.494882] io scheduler noop registered [ 25.494885] io scheduler anticipatory registered [ 25.494887] io scheduler deadline registered [ 25.494902] io scheduler cfq registered (default) [ 25.494917] Boot video device is 0000:00:02.0 [ 25.495096] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 25.495155] assign_interrupt_mode Found MSI capability [ 25.495206] Allocate Port Service[0000:00:1c.0:pcie00] [ 25.495247] Allocate Port Service[0000:00:1c.0:pcie02] [ 25.495349] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 25.495407] assign_interrupt_mode Found MSI capability [ 25.495454] Allocate Port Service[0000:00:1c.1:pcie00] [ 25.495488] Allocate Port Service[0000:00:1c.1:pcie02] [ 25.495595] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 25.495653] assign_interrupt_mode Found MSI capability [ 25.495700] Allocate Port Service[0000:00:1c.2:pcie00] [ 25.495734] Allocate Port Service[0000:00:1c.2:pcie02] [ 25.495947] isapnp: Scanning for PnP cards... [ 25.849691] isapnp: No Plug & Play device found [ 25.876536] Real Time Clock Driver v1.12ac [ 25.876778] hpet_resources: 0xfed00000 is busy [ 25.876812] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 25.878094] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 25.878226] input: Macintosh mouse button emulation as /class/input/input0 [ 25.878309] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 25.878628] i8042.c: Detected active multiplexing controller, rev 1.1. [ 25.878705] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 25.878710] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 25.878713] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 25.878716] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 25.878719] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 25.878917] mice: PS/2 mouse device common for all mice [ 25.879142] EISA: Probing bus 0 at eisa.0 [ 25.879150] Cannot allocate resource for EISA slot 1 [ 25.879153] Cannot allocate resource for EISA slot 2 [ 25.879156] Cannot allocate resource for EISA slot 3 [ 25.879158] Cannot allocate resource for EISA slot 4 [ 25.879161] Cannot allocate resource for EISA slot 5 [ 25.879176] EISA: Detected 0 cards. [ 25.879272] TCP cubic registered [ 25.879289] NET: Registered protocol family 1 [ 25.879311] Using IPI No-Shortcut mode [ 25.879478] Magic number: 7:62:579 [ 25.879634] hash matches device kmem [ 25.879831] Freeing unused kernel memory: 364k freed [ 25.885116] input: AT Translated Set 2 keyboard as /class/input/input1 [ 27.086319] AppArmor: AppArmor initialized<5>audit(1190802878.772:2): type=1505 info="AppArmor initialized" pid=1239 [ 27.094854] fuse init (API version 7.8) [ 27.100702] Failure registering capabilities with primary security module. [ 27.137041] ACPI: SSDT 7F68851F, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 27.137271] ACPI: SSDT 7F687FD8, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 27.137605] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 27.137846] ACPI: SSDT 7F688757, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 27.138055] ACPI: SSDT 7F68849A, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 27.138427] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 3.192000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.196000] Time: hpet clocksource has been installed. [ 3.636000] r8169 Gigabit Ethernet driver 2.2LK loaded [ 3.636000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 3.636000] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 3.636000] eth0: RTL8101e at 0xf886e000, 00:1b:38:1d:d1:ae, IRQ 18 [ 3.656000] usbcore: registered new interface driver usbfs [ 3.656000] usbcore: registered new interface driver hub [ 3.656000] usbcore: registered new device driver usb [ 3.656000] USB Universal Host Controller Interface driver v3.0 [ 3.656000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 3.656000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.656000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.656000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.656000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 [ 3.656000] usb usb1: configuration #1 chosen from 1 choice [ 3.656000] hub 1-0:1.0: USB hub found [ 3.656000] hub 1-0:1.0: 2 ports detected [ 3.688000] SCSI subsystem initialized [ 3.696000] libata version 2.21 loaded. [ 3.760000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 3.760000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.760000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.760000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.760000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 [ 3.760000] usb usb2: configuration #1 chosen from 1 choice [ 3.760000] hub 2-0:1.0: USB hub found [ 3.760000] hub 2-0:1.0: 2 ports detected [ 3.864000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.864000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.864000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.864000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.864000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 3.864000] usb usb3: configuration #1 chosen from 1 choice [ 3.864000] hub 3-0:1.0: USB hub found [ 3.864000] hub 3-0:1.0: 2 ports detected [ 3.968000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 [ 3.968000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.968000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.968000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 3.968000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 [ 3.968000] usb usb4: configuration #1 chosen from 1 choice [ 3.968000] hub 4-0:1.0: USB hub found [ 3.968000] hub 4-0:1.0: 2 ports detected [ 4.000000] Clocksource tsc unstable (delta = -146340151 ns) [ 4.072000] ata_piix 0000:00:1f.2: version 2.11 [ 4.072000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 4.208000] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 4.228000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 4.228000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 4.228000] scsi0 : ata_piix [ 4.228000] scsi1 : ata_piix [ 4.228000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14 [ 4.228000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15 [ 4.380000] usb 3-1: configuration #1 chosen from 1 choice [ 4.396000] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7DP, max UDMA/100 [ 4.396000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.396000] usbcore: registered new interface driver hiddev [ 4.412000] input: Sunplus Sunplus USB Mouse as /class/input/input2 [ 4.412000] input: USB HID v1.00 Mouse [Sunplus Sunplus USB Mouse] on usb-0000:00:1d.2-1 [ 4.412000] usbcore: registered new interface driver usbhid [ 4.412000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 4.416000] ata1.00: configured for UDMA/100 [ 4.752000] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, TO04, max UDMA/33 [ 4.940000] ata2.00: configured for UDMA/33 [ 4.940000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 [ 4.948000] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D TO04 PQ: 0 ANSI: 5 [ 4.948000] ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 16 [ 4.952000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 4.952000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.952000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.952000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 4.952000] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.952000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.952000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdc444000 [ 4.956000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.956000] usb usb5: configuration #1 chosen from 1 choice [ 4.956000] hub 5-0:1.0: USB hub found [ 4.956000] hub 5-0:1.0: 8 ports detected [ 5.000000] usb 3-1: USB disconnect, address 2 [ 5.000000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[dc005000-dc0057ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 5.004000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.004000] sd 0:0:0:0: [sda] Write Protect is off [ 5.004000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.004000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.004000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.004000] sd 0:0:0:0: [sda] Write Protect is off [ 5.004000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.004000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.004000] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.056000] Uniform CD-ROM driver Revision: 3.20 [ 5.056000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.060000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.060000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.424000] sda1 sda2 < sda5 > [ 5.452000] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.684000] Attempting manual resume [ 5.684000] swsusp: Resume From Partition 8:5 [ 5.684000] PM: Checking swsusp image. [ 5.684000] PM: Resume from disk failed. [ 5.700000] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.700000] EXT3-fs: write access will be enabled during recovery. [ 5.720000] usb 3-1: new low speed USB device using uhci_hcd and address 3 [ 5.892000] usb 3-1: configuration #1 chosen from 1 choice [ 5.912000] input: Sunplus Sunplus USB Mouse as /class/input/input3 [ 5.912000] input: USB HID v1.00 Mouse [Sunplus Sunplus USB Mouse] on usb-0000:00:1d.2-1 [ 6.272000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f77bb40d173] [ 8.848000] kjournald starting. Commit interval 5 seconds [ 8.848000] EXT3-fs: sda1: orphan cleanup on readonly fs [ 8.872000] ext3_orphan_cleanup: deleting unreferenced inode 7733326 [ 8.880000] ext3_orphan_cleanup: deleting unreferenced inode 7784183 [ 8.880000] ext3_orphan_cleanup: deleting unreferenced inode 8619521 [ 8.896000] ext3_orphan_cleanup: deleting unreferenced inode 8618262 [ 8.896000] ext3_orphan_cleanup: deleting unreferenced inode 8618156 [ 8.896000] ext3_orphan_cleanup: deleting unreferenced inode 8618250 [ 8.896000] EXT3-fs: sda1: 6 orphan inodes deleted [ 8.896000] EXT3-fs: recovery complete. [ 8.992000] EXT3-fs: mounted filesystem with ordered data mode. [ 18.524000] r8169: eth0: link down [ 19.444000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 19.444000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.580000] Linux agpgart interface v0.102 (c) Dave Jones [ 19.648000] agpgart: Detected an Intel 945GM Chipset. [ 19.648000] agpgart: Detected 7932K stolen memory. [ 19.664000] agpgart: AGP aperture is 256M @ 0xc0000000 [ 19.752000] intel_rng: FWH not detected [ 19.788000] iTCO_vendor_support: vendor-support=0 [ 19.788000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 19.788000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 19.788000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 20.028000] NET: Registered protocol family 17 [ 20.052000] Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00] [ 20.052000] Yenta: Enabling burst memory read transactions [ 20.052000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 20.052000] Yenta: Routing CardBus interrupts to PCI [ 20.052000] Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x64 [ 20.236000] input: PS/2 Mouse as /class/input/input4 [ 20.248000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input5 [ 20.264000] sdhci: Secure Digital Host Controller Interface driver [ 20.264000] sdhci: Copyright(c) Pierre Ossman [ 20.284000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17 [ 20.284000] Socket status: 30000006 [ 20.284000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a [ 20.284000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 20.284000] cs: IO port probe 0x5000-0x5fff: clean. [ 20.284000] pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff [ 20.284000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 20.284000] ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 20.284000] sdhci: SDHCI controller found at 0000:06:04.3 [104c:803c] (rev 0) [ 20.284000] ACPI: PCI Interrupt 0000:06:04.3[C] -> GSI 18 (level, low) -> IRQ 18 [ 20.284000] mmc0: SDHCI at 0xdc005800 irq 18 DMA [ 20.512000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 20.512000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 20.720000] hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS... [ 20.724000] cs: IO port probe 0x100-0x3af: clean. [ 20.724000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 20.724000] cs: IO port probe 0x820-0x8ff: clean. [ 20.724000] cs: IO port probe 0xc00-0xcf7: clean. [ 20.728000] cs: IO port probe 0xa00-0xaff: clean. [ 21.480000] si3054: cannot initialize. EXT MID = 0000 [ 21.664000] lp: driver loaded but no devices found [ 21.776000] ndiswrapper version 1.45 loaded (smp=yes) [ 21.876000] ndiswrapper: driver net5211 (,11/15/2006,5.1.1.9) loaded [ 21.876000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 21.876000] ndiswrapper (ZwClose:2247): closing handle 0xdf816028 not implemented [ 21.876000] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 22.288000] ndiswrapper: using IRQ 16 [ 22.488000] wlan0: ethernet device 00:1b:9e:3d:f5:9d using serialized NDIS driver: net5211, version: 0x50001, NDIS version: 0x501, vendor: '', 168C:001C.5.conf [ 22.492000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 22.492000] usbcore: registered new interface driver ndiswrapper [ 22.572000] Adding 6048432k swap on /dev/sda5. Priority:-1 extents:1 across:6048432k [ 23.084000] EXT3 FS on sda1, internal journal [ 28.260000] No dock devices found. [ 28.416000] ACPI: Battery Slot [BAT1] (battery present) [ 28.432000] input: Power Button (FF) as /class/input/input6 [ 28.432000] ACPI: Power Button (FF) [PWRF] [ 28.432000] input: Lid Switch as /class/input/input7 [ 28.432000] ACPI: Lid Switch [LID0] [ 28.432000] input: Power Button (CM) as /class/input/input8 [ 28.432000] ACPI: Power Button (CM) [PWRB] [ 28.540000] ACPI: AC Adapter [ACAD] (off-line) [ 28.596000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 28.604000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 29.956000] ppdev: user-space parallel port driver [ 30.388000] audit(1190802906.657:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5085 profile="/usr/sbin/cupsd" [ 30.488000] apm: BIOS not found. [ 30.800000] Failure registering capabilities with primary security module. [ 31.084000] Bluetooth: Core ver 2.11 [ 31.084000] NET: Registered protocol family 31 [ 31.084000] Bluetooth: HCI device and connection manager initialized [ 31.084000] Bluetooth: HCI socket layer initialized [ 31.104000] Bluetooth: L2CAP ver 2.8 [ 31.104000] Bluetooth: L2CAP socket layer initialized [ 31.196000] Bluetooth: RFCOMM socket layer initialized [ 31.196000] Bluetooth: RFCOMM TTY layer initialized [ 31.196000] Bluetooth: RFCOMM ver 1.8 [ 34.004000] NET: Registered protocol family 10 [ 34.004000] lo: Disabled Privacy Extensions [ 34.004000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.004000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 35.932000] [drm] Initialized drm 1.1.0 20060810 [ 35.932000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 35.936000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 38.288000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 38.436000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 38.632000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 48.992000] wlan0: no IPv6 routers present