Dec 27 10:25:35 brownie kernel: [  595.756318] usb 6-3: new high speed USB device using ehci_hcd and address 3
Dec 27 10:25:35 brownie kernel: [  595.901802] usb 6-3: configuration #1 chosen from 1 choice
Dec 27 10:25:35 brownie NetworkManager: <debug> [1198751135.345768] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_573_a400_'). 
Dec 27 10:25:35 brownie kernel: [  596.155569] usbcore: registered new interface driver libusual
Dec 27 10:25:35 brownie NetworkManager: <debug> [1198751135.603519] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_573_a400__if0'). 
Dec 27 10:25:35 brownie kernel: [  596.204922] Initializing USB Mass Storage driver...
Dec 27 10:25:35 brownie kernel: [  596.206522] scsi0 : SCSI emulation for USB Mass Storage devices
Dec 27 10:25:35 brownie kernel: [  596.206999] usb-storage: device found at 3
Dec 27 10:25:35 brownie kernel: [  596.207003] usb-storage: waiting for device to settle before scanning
Dec 27 10:25:35 brownie kernel: [  596.207168] usbcore: registered new interface driver usb-storage
Dec 27 10:25:35 brownie kernel: [  596.207250] USB Mass Storage support registered.
Dec 27 10:25:35 brownie NetworkManager: <debug> [1198751135.666414] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_573_a400__usbraw'). 
Dec 27 10:25:40 brownie kernel: [  601.207070] usb-storage: device scan complete
Dec 27 10:25:40 brownie kernel: [  601.215178] scsi 0:0:0:0: Direct-Access     LG       KU990            000  PQ: 0 ANSI: 2
Dec 27 10:25:40 brownie kernel: [  601.266148] sd 0:0:0:0: [sda] 3967488 512-byte hardware sectors (2031 MB)
Dec 27 10:25:40 brownie kernel: [  601.269138] sd 0:0:0:0: [sda] Write Protect is off
Dec 27 10:25:40 brownie kernel: [  601.269143] sd 0:0:0:0: [sda] Mode Sense: 0f 0e 00 00
Dec 27 10:25:40 brownie kernel: [  601.269146] sd 0:0:0:0: [sda] Assuming drive cache: write through
Dec 27 10:25:40 brownie kernel: [  601.278137] sd 0:0:0:0: [sda] 3967488 512-byte hardware sectors (2031 MB)
Dec 27 10:25:40 brownie kernel: [  601.281133] sd 0:0:0:0: [sda] Write Protect is off
Dec 27 10:25:40 brownie kernel: [  601.281137] sd 0:0:0:0: [sda] Mode Sense: 0f 0e 00 00
Dec 27 10:25:40 brownie kernel: [  601.281141] sd 0:0:0:0: [sda] Assuming drive cache: write through
Dec 27 10:25:40 brownie kernel: [  601.281146]  sda: sda1
Dec 27 10:25:40 brownie kernel: [  601.287113] sd 0:0:0:0: [sda] Attached SCSI removable disk
Dec 27 10:25:40 brownie kernel: [  601.321450] sd 0:0:0:0: Attached scsi generic sg0 type 0
Dec 27 10:25:40 brownie NetworkManager: <debug> [1198751140.800783] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_573_a400__if0_scsi_host'). 
Dec 27 10:25:40 brownie NetworkManager: <debug> [1198751140.803519] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_573_a400__if0_scsi_host_scsi_device_lun0'). 
Dec 27 10:25:40 brownie NetworkManager: <debug> [1198751140.856807] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_573_a400__if0_scsi_host_scsi_device_lun0_scsi_generic'). 
Dec 27 10:25:41 brownie kernel: [  601.652888] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:41 brownie kernel: [  601.924912] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:41 brownie NetworkManager: <debug> [1198751141.579161] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_LG_KU990_0_0'). 
Dec 27 10:25:41 brownie kernel: [  602.356975] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:42 brownie kernel: [  602.620987] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:42 brownie kernel: [  602.889005] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:42 brownie kernel: [  603.149032] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:42 brownie kernel: [  603.421073] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:43 brownie kernel: [  603.693083] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:43 brownie kernel: [  603.838802] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:25:43 brownie kernel: [  603.838813] end_request: I/O error, dev sda, sector 258
Dec 27 10:25:43 brownie kernel: [  603.838819] Buffer I/O error on device sda1, logical block 9
Dec 27 10:25:43 brownie kernel: [  603.838827] Buffer I/O error on device sda1, logical block 10
Dec 27 10:25:43 brownie kernel: [  603.838830] Buffer I/O error on device sda1, logical block 11
Dec 27 10:25:43 brownie kernel: [  603.838834] Buffer I/O error on device sda1, logical block 12
Dec 27 10:25:43 brownie kernel: [  603.838837] Buffer I/O error on device sda1, logical block 13
Dec 27 10:25:43 brownie kernel: [  603.838840] Buffer I/O error on device sda1, logical block 14
Dec 27 10:25:43 brownie kernel: [  603.838843] Buffer I/O error on device sda1, logical block 15
Dec 27 10:25:43 brownie kernel: [  603.838848] Buffer I/O error on device sda1, logical block 16
Dec 27 10:25:43 brownie kernel: [  603.838852] Buffer I/O error on device sda1, logical block 17
Dec 27 10:25:43 brownie kernel: [  603.838855] Buffer I/O error on device sda1, logical block 18
Dec 27 10:25:43 brownie kernel: [  603.953111] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:43 brownie kernel: [  604.221150] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:43 brownie kernel: [  604.481209] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:44 brownie kernel: [  604.753187] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:44 brownie kernel: [  605.013217] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:44 brownie kernel: [  605.273239] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:44 brownie kernel: [  605.419955] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:25:44 brownie kernel: [  605.419968] end_request: I/O error, dev sda, sector 258
Dec 27 10:25:45 brownie kernel: [  605.601285] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:45 brownie kernel: [  605.861294] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:45 brownie kernel: [  606.121318] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:45 brownie kernel: [  606.385347] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:46 brownie kernel: [  606.657375] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:46 brownie kernel: [  606.917397] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:46 brownie kernel: [  607.063308] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:25:46 brownie kernel: [  607.063321] end_request: I/O error, dev sda, sector 258
Dec 27 10:25:46 brownie kernel: [  607.201421] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:46 brownie kernel: [  607.465505] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:47 brownie kernel: [  607.741476] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:47 brownie kernel: [  608.033505] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:47 brownie kernel: [  608.297530] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:48 brownie kernel: [  608.625566] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:48 brownie kernel: [  608.773604] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:25:48 brownie kernel: [  608.773620] end_request: I/O error, dev sda, sector 259
Dec 27 10:25:48 brownie kernel: [  608.969595] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:48 brownie kernel: [  609.233618] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:48 brownie kernel: [  609.501660] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:49 brownie kernel: [  609.769718] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:49 brownie kernel: [  610.029696] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:49 brownie kernel: [  610.293722] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:49 brownie kernel: [  610.441773] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:25:49 brownie kernel: [  610.441787] end_request: I/O error, dev sda, sector 258
Dec 27 10:25:49 brownie kernel: [  610.441791] printk: 35 messages suppressed.
Dec 27 10:25:49 brownie kernel: [  610.441796] Buffer I/O error on device sda1, logical block 9
Dec 27 10:25:49 brownie kernel: [  610.573764] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:50 brownie kernel: [  610.841777] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:50 brownie kernel: [  611.105800] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:50 brownie kernel: [  611.369825] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:51 brownie kernel: [  611.633849] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:51 brownie kernel: [  611.901873] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:51 brownie kernel: [  612.047354] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:25:51 brownie kernel: [  612.047364] end_request: I/O error, dev sda, sector 258
Dec 27 10:25:51 brownie kernel: [  612.197908] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:51 brownie kernel: [  612.466010] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:52 brownie kernel: [  612.725958] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:52 brownie kernel: [  613.001981] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:52 brownie kernel: [  613.258007] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:52 brownie kernel: [  613.518035] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:53 brownie kernel: [  613.672178] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:25:53 brownie kernel: [  613.672189] end_request: I/O error, dev sda, sector 258
Dec 27 10:25:53 brownie kernel: [  613.794051] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:53 brownie kernel: [  614.110057] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:53 brownie kernel: [  614.410063] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:54 brownie kernel: [  614.694068] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:54 brownie kernel: [  614.957978] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:54 brownie kernel: [  615.221927] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:54 brownie kernel: [  615.369846] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:25:54 brownie kernel: [  615.369862] end_request: I/O error, dev sda, sector 259
Dec 27 10:25:54 brownie kernel: [  615.369867] printk: 38 messages suppressed.
Dec 27 10:25:54 brownie kernel: [  615.369872] Buffer I/O error on device sda1, logical block 10
Dec 27 10:25:54 brownie NetworkManager: <debug> [1198751154.839950] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_3963_3331'). 
Dec 27 10:25:55 brownie hald: mounted /dev/sda1 on behalf of uid 1000
Dec 27 10:25:56 brownie kernel: [  616.837256] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:56 brownie kernel: [  616.984335] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:25:56 brownie kernel: [  616.984349] end_request: I/O error, dev sda, sector 896
Dec 27 10:25:56 brownie kernel: [  617.384999] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:57 brownie kernel: [  617.676905] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:59 brownie kernel: [  617.948831] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:59 brownie kernel: [  619.204290] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:59 brownie kernel: [  619.464238] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:59 brownie kernel: [  619.724074] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:59 brownie kernel: [  619.987967] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:59 brownie kernel: [  620.247843] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:25:59 brownie kernel: [  620.519744] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:26:00 brownie kernel: [  620.667488] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:26:00 brownie kernel: [  620.667502] end_request: I/O error, dev sda, sector 258
Dec 27 10:26:00 brownie kernel: [  620.668207] FAT: FAT read failed (blocknr 9)
Dec 27 10:28:02 brownie kernel: [  743.186215] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:03 brownie kernel: [  743.674009] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:03 brownie kernel: [  743.973893] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:03 brownie kernel: [  744.373724] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:04 brownie kernel: [  744.737567] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:04 brownie kernel: [  745.233367] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:04 brownie kernel: [  745.379418] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:04 brownie kernel: [  745.379430] end_request: I/O error, dev sda, sector 20736
Dec 27 10:28:05 brownie kernel: [  745.609215] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:05 brownie kernel: [  745.985061] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:05 brownie kernel: [  746.360920] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:06 brownie kernel: [  746.740795] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:06 brownie kernel: [  747.328538] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:07 brownie kernel: [  747.612421] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:07 brownie kernel: [  747.760180] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:07 brownie kernel: [  747.760196] end_request: I/O error, dev sda, sector 20736
Dec 27 10:28:07 brownie kernel: [  748.164191] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:07 brownie kernel: [  748.500086] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:08 brownie kernel: [  749.051842] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:08 brownie kernel: [  749.399698] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:09 brownie kernel: [  750.335330] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:10 brownie kernel: [  751.083024] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:10 brownie kernel: [  751.238584] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:10 brownie kernel: [  751.238597] end_request: I/O error, dev sda, sector 1344
Dec 27 10:28:11 brownie kernel: [  752.154570] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:12 brownie kernel: [  753.462084] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:13 brownie kernel: [  753.793905] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:13 brownie kernel: [  754.169754] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:13 brownie kernel: [  754.465656] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:15 brownie kernel: [  755.533221] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:15 brownie kernel: [  755.681176] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:15 brownie kernel: [  755.681192] end_request: I/O error, dev sda, sector 1344
Dec 27 10:28:15 brownie kernel: [  755.945042] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:16 brownie kernel: [  756.544800] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:16 brownie kernel: [  756.860668] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:16 brownie kernel: [  757.268504] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:17 brownie kernel: [  757.620363] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:17 brownie kernel: [  757.948229] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:17 brownie kernel: [  758.094872] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:17 brownie kernel: [  758.094887] end_request: I/O error, dev sda, sector 10304
Dec 27 10:28:17 brownie kernel: [  758.328077] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:18 brownie kernel: [  758.631970] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:18 brownie kernel: [  759.063781] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:18 brownie kernel: [  759.419635] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:19 brownie kernel: [  759.931430] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:19 brownie kernel: [  760.227308] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:19 brownie kernel: [  760.373340] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:19 brownie kernel: [  760.373353] end_request: I/O error, dev sda, sector 10304
Dec 27 10:28:20 brownie kernel: [  760.531203] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:20 brownie kernel: [  760.791097] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:20 brownie kernel: [  761.050977] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:20 brownie kernel: [  761.310871] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:21 brownie kernel: [  761.574767] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:21 brownie kernel: [  761.834660] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:21 brownie kernel: [  761.980258] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:21 brownie kernel: [  761.980269] end_request: I/O error, dev sda, sector 258
Dec 27 10:28:21 brownie kernel: [  761.992338] FAT: FAT read failed (blocknr 9)
Dec 27 10:28:21 brownie kernel: [  762.198515] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:22 brownie kernel: [  762.870242] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:22 brownie kernel: [  763.226102] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:23 brownie kernel: [  763.653926] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:23 brownie kernel: [  764.009787] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:23 brownie kernel: [  764.301664] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:23 brownie kernel: [  764.449635] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:23 brownie kernel: [  764.449651] end_request: I/O error, dev sda, sector 20736
Dec 27 10:28:24 brownie kernel: [  764.705502] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:24 brownie kernel: [  764.989385] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:25 brownie kernel: [  766.100936] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:25 brownie kernel: [  766.360832] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:26 brownie kernel: [  766.704692] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:26 brownie kernel: [  766.996575] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:26 brownie kernel: [  767.144547] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:26 brownie kernel: [  767.144563] end_request: I/O error, dev sda, sector 1344
Dec 27 10:28:26 brownie kernel: [  767.364443] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:27 brownie kernel: [  767.724283] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:27 brownie kernel: [  768.068142] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:27 brownie kernel: [  768.452034] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:28 brownie kernel: [  768.743869] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:28 brownie kernel: [  769.327650] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:28 brownie kernel: [  769.473879] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:28 brownie kernel: [  769.473894] end_request: I/O error, dev sda, sector 10304
Dec 27 10:28:29 brownie kernel: [  770.111319] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:29 brownie kernel: [  770.463195] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:30 brownie kernel: [  770.759058] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:30 brownie kernel: [  771.122908] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:30 brownie kernel: [  771.390801] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:31 brownie kernel: [  771.666694] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:31 brownie kernel: [  771.812755] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:31 brownie kernel: [  771.812769] end_request: I/O error, dev sda, sector 335680
Dec 27 10:28:31 brownie kernel: [  772.378400] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:32 brownie kernel: [  772.650291] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:32 brownie kernel: [  772.994155] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:32 brownie kernel: [  773.517958] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:33 brownie kernel: [  773.913787] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:33 brownie kernel: [  774.317620] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:33 brownie kernel: [  774.464067] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:33 brownie kernel: [  774.464082] end_request: I/O error, dev sda, sector 335680
Dec 27 10:28:34 brownie kernel: [  774.613501] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:34 brownie kernel: [  774.873414] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:34 brownie kernel: [  775.137290] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:34 brownie kernel: [  775.401212] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:35 brownie kernel: [  775.661077] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:35 brownie kernel: [  775.920974] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:35 brownie kernel: [  776.068941] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:35 brownie kernel: [  776.068957] end_request: I/O error, dev sda, sector 258
Dec 27 10:28:35 brownie kernel: [  776.079118] FAT: FAT read failed (blocknr 9)
Dec 27 10:28:36 brownie kernel: [  776.672669] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:36 brownie kernel: [  776.940561] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:36 brownie kernel: [  777.364405] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:37 brownie kernel: [  777.892175] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:38 brownie kernel: [  778.747845] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:38 brownie kernel: [  779.155664] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:38 brownie kernel: [  779.303636] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:38 brownie kernel: [  779.303650] end_request: I/O error, dev sda, sector 336128
Dec 27 10:28:39 brownie kernel: [  780.083292] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:40 brownie kernel: [  780.659058] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:40 brownie kernel: [  781.206839] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:40 brownie kernel: [  781.466754] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:41 brownie kernel: [  782.250418] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:41 brownie kernel: [  782.510328] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:42 brownie kernel: [  782.657800] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:42 brownie kernel: [  782.657816] end_request: I/O error, dev sda, sector 336128
Dec 27 10:28:42 brownie kernel: [  782.774250] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:42 brownie kernel: [  783.038097] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:42 brownie kernel: [  783.297995] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:43 brownie kernel: [  783.557890] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:43 brownie kernel: [  783.821781] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:43 brownie kernel: [  784.081676] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:43 brownie kernel: [  784.229650] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:43 brownie kernel: [  784.229664] end_request: I/O error, dev sda, sector 258
Dec 27 10:28:43 brownie kernel: [  784.230083] FAT: FAT read failed (blocknr 9)
Dec 27 10:28:43 brownie kernel: [  784.345572] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:44 brownie kernel: [  784.613461] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:49 brownie kernel: [  789.679416] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:50 brownie kernel: [  790.559062] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:51 brownie kernel: [  792.142422] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:52 brownie kernel: [  793.349936] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:52 brownie kernel: [  793.497688] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:52 brownie kernel: [  793.497704] end_request: I/O error, dev sda, sector 336512
Dec 27 10:28:53 brownie kernel: [  793.749770] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:54 brownie kernel: [  794.749385] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:54 brownie kernel: [  795.173214] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:54 brownie kernel: [  795.433107] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:55 brownie kernel: [  796.164798] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:58 brownie kernel: [  799.191618] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:58 brownie kernel: [  799.337422] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:28:58 brownie kernel: [  799.337434] end_request: I/O error, dev sda, sector 336512
Dec 27 10:28:58 brownie kernel: [  799.459503] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:28:59 brownie kernel: [  800.187173] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:01 brownie kernel: [  801.630592] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:01 brownie kernel: [  801.982489] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:02 brownie kernel: [  802.674214] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:05 brownie kernel: [  806.032814] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:05 brownie kernel: [  806.180780] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:29:05 brownie kernel: [  806.180796] end_request: I/O error, dev sda, sector 20800
Dec 27 10:29:06 brownie kernel: [  807.252322] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:08 brownie kernel: [  809.115567] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:09 brownie kernel: [  809.611366] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:09 brownie kernel: [  809.903246] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:09 brownie kernel: [  810.163146] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:12 brownie kernel: [  812.762096] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:12 brownie kernel: [  812.910066] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:29:12 brownie kernel: [  812.910083] end_request: I/O error, dev sda, sector 337024
Dec 27 10:29:12 brownie kernel: [  813.037982] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:12 brownie kernel: [  813.309889] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:13 brownie kernel: [  814.289477] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:14 brownie kernel: [  814.821278] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:14 brownie kernel: [  815.085157] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:15 brownie kernel: [  815.760883] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:15 brownie kernel: [  815.908852] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:29:15 brownie kernel: [  815.908868] end_request: I/O error, dev sda, sector 337024
Dec 27 10:29:15 brownie kernel: [  816.340650] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:19 brownie kernel: [  819.611328] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:19 brownie kernel: [  819.875221] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:19 brownie kernel: [  820.143112] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:20 brownie kernel: [  820.894812] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:21 brownie kernel: [  821.810441] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:21 brownie kernel: [  822.094329] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:21 brownie kernel: [  822.240876] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:29:21 brownie kernel: [  822.240890] end_request: I/O error, dev sda, sector 338432
Dec 27 10:29:21 brownie kernel: [  822.394203] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:25 brownie kernel: [  825.960839] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:27 brownie kernel: [  828.355798] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:30 brownie kernel: [  830.642877] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:30 brownie kernel: [  830.906768] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:32 brownie kernel: [  833.421749] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:33 brownie kernel: [  833.569720] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:29:33 brownie kernel: [  833.569738] end_request: I/O error, dev sda, sector 20816
Dec 27 10:29:33 brownie kernel: [  833.697661] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:33 brownie kernel: [  833.961574] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:33 brownie kernel: [  834.229424] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:33 brownie kernel: [  834.489334] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:34 brownie kernel: [  834.753212] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:35 brownie kernel: [  835.688836] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:35 brownie kernel: [  835.836805] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:29:35 brownie kernel: [  835.836821] end_request: I/O error, dev sda, sector 20816
Dec 27 10:29:35 brownie kernel: [  836.120677] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:35 brownie kernel: [  836.456572] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:42 brownie kernel: [  842.558063] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:42 brownie kernel: [  842.841944] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:43 brownie kernel: [  844.361332] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:44 brownie kernel: [  844.661211] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:44 brownie kernel: [  844.925106] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:44 brownie kernel: [  845.188998] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:44 brownie kernel: [  845.336967] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:29:44 brownie kernel: [  845.336983] end_request: I/O error, dev sda, sector 20816
Dec 27 10:29:45 brownie kernel: [  846.116623] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:46 brownie kernel: [  846.584437] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:46 brownie kernel: [  847.140264] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:47 brownie kernel: [  847.512079] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:49 brownie kernel: [  849.931086] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:49 brownie kernel: [  850.270946] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:49 brownie kernel: [  850.415979] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:29:49 brownie kernel: [  850.416017] end_request: I/O error, dev sda, sector 338464
Dec 27 10:29:50 brownie kernel: [  850.594816] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:50 brownie kernel: [  850.866703] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:50 brownie kernel: [  851.130602] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:50 brownie kernel: [  851.398492] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:51 brownie kernel: [  851.674378] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:51 brownie kernel: [  851.950269] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:51 brownie kernel: [  852.098053] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:29:51 brownie kernel: [  852.098070] end_request: I/O error, dev sda, sector 338440
Dec 27 10:29:52 brownie kernel: [  852.873897] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:53 brownie kernel: [  853.713583] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:54 brownie kernel: [  854.641183] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:55 brownie kernel: [  855.524826] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:55 brownie kernel: [  855.856691] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:55 brownie kernel: [  856.464468] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:56 brownie kernel: [  856.612416] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:29:56 brownie kernel: [  856.612432] end_request: I/O error, dev sda, sector 10944
Dec 27 10:29:57 brownie kernel: [  857.599987] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:57 brownie kernel: [  858.371675] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:58 brownie kernel: [  859.339285] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:29:59 brownie kernel: [  860.366902] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:00 brownie kernel: [  860.658749] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:01 brownie kernel: [  861.542399] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:01 brownie kernel: [  861.690364] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:30:01 brownie kernel: [  861.690377] end_request: I/O error, dev sda, sector 10944
Dec 27 10:30:01 brownie kernel: [  862.098171] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:01 brownie kernel: [  862.422037] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:02 brownie kernel: [  863.101767] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:02 brownie kernel: [  863.413655] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:03 brownie kernel: [  863.701560] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:04 brownie kernel: [  865.064974] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:04 brownie kernel: [  865.212947] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:30:04 brownie kernel: [  865.212960] end_request: I/O error, dev sda, sector 17408
Dec 27 10:30:04 brownie kernel: [  865.400840] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:05 brownie kernel: [  865.720728] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:05 brownie kernel: [  866.016587] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:05 brownie kernel: [  866.280481] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:08 brownie kernel: [  868.823455] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:08 brownie kernel: [  869.199302] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:08 brownie kernel: [  869.347108] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:30:08 brownie kernel: [  869.347121] end_request: I/O error, dev sda, sector 17408
Dec 27 10:30:11 brownie kernel: [  871.678301] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:18 brownie kernel: [  876.724306] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:18 brownie kernel: [  876.992192] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:18 brownie kernel: [  877.288060] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:19 brownie kernel: [  879.958977] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:22 brownie kernel: [  883.229639] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:22 brownie kernel: [  883.377607] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:30:22 brownie kernel: [  883.377623] end_request: I/O error, dev sda, sector 19136
Dec 27 10:30:25 brownie kernel: [  886.356421] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:27 brownie kernel: [  888.355618] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:30 brownie kernel: [  890.562678] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:30 brownie kernel: [  890.858553] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:32 brownie kernel: [  892.525885] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:33 brownie kernel: [  894.061261] usb 6-3: reset high speed USB device using ehci_hcd and address 3
Dec 27 10:30:33 brownie kernel: [  894.209231] sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Dec 27 10:30:33 brownie kernel: [  894.209247] end_request: I/O error, dev sda, sector 19136
Dec 27 10:30:46 brownie hald: unmounted /dev/sda1 from '/media/disk' on behalf of uid 1000