[4294667.296000] Linux version 2.6.15-19-686 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Mon Mar 20 17:33:20 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[4294667.296000]  BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
[4294667.296000]  BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 511MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000fc0f0
[4294667.296000] On node 0 totalpages: 131056
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 126960 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 AMI                                   ) @ 0x000fa320
[4294667.296000] ACPI: RSDT (v001 AMIINT INTEL865 0x00000010 MSFT 0x00000097) @ 0x1fff0000
[4294667.296000] ACPI: FADT (v001 AMIINT INTEL865 0x00000011 MSFT 0x00000097) @ 0x1fff0030
[4294667.296000] ACPI: MADT (v001 AMIINT INTEL865 0x00000009 MSFT 0x00000097) @ 0x1fff00c0
[4294667.296000] ACPI: DSDT (v001  INTEL    I865G 0x00001000 MSFT 0x0100000d) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:2 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 15:2 APIC version 20
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda9 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 2400.094 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294667.660000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294667.661000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.671000] Memory: 507908k/524224k available (2089k kernel code, 15692k reserved, 589k data, 328k init, 0k highmem)
[4294667.671000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.731000] Calibrating delay using timer specific routine.. 4803.47 BogoMIPS (lpj=2401738)
[4294667.731000] Security Framework v1.0.0 initialized
[4294667.731000] SELinux:  Disabled at boot.
[4294667.731000] Mount-cache hash table entries: 512
[4294667.731000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[4294667.731000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[4294667.731000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294667.731000] CPU: L2 cache: 512K
[4294667.731000] CPU: Hyper-Threading is disabled
[4294667.731000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
[4294667.731000] mtrr: v2.0 (20020519)
[4294667.731000] Enabling fast FPU save and restore... done.
[4294667.731000] Enabling unmasked SIMD FPU exception support... done.
[4294667.731000] Checking 'hlt' instruction... OK.
[4294667.735000] SMP alternatives: switching to UP code
[4294667.735000] checking if image is initramfs... it is
[4294668.251000] Freeing initrd memory: 6559k freed
[4294668.258000] ACPI: Looking for DSDT ... not found!
[4294668.260000] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
[4294668.260000] SMP alternatives: switching to SMP code
[4294668.260000] Booting processor 1/1 eip 3000
[4294668.270000] Initializing CPU#1
[4294668.331000] Calibrating delay using timer specific routine.. 4799.51 BogoMIPS (lpj=2399758)
[4294668.331000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[4294668.331000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[4294668.331000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294668.331000] CPU: L2 cache: 512K
[4294668.331000] CPU: Hyper-Threading is disabled
[4294668.331000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
[4294668.331000] CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
[4294668.331000] Total of 2 processors activated (9602.99 BogoMIPS).
[4294668.331000] ENABLING IO-APIC IRQs
[4294668.331000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294668.442000] checking TSC synchronization across 2 CPUs: passed.
[4294668.443000] Brought up 2 CPUs
[4294668.443000] NET: Registered protocol family 16
[4294668.443000] EISA bus registered
[4294668.443000] ACPI: bus type pci registered
[4294668.444000] PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
[4294668.444000] PCI: Using configuration type 1
[4294668.444000] ACPI: Subsystem revision 20051216
[4294668.449000] ACPI: Interpreter enabled
[4294668.449000] ACPI: Using IOAPIC for interrupt routing
[4294668.450000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.450000] PCI: Probing PCI hardware (bus 00)
[4294668.453000] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[4294668.453000] PCI quirk: region 0400-043f claimed by ICH4 GPIO
[4294668.453000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294668.453000] Boot video device is 0000:01:00.0
[4294668.454000] PCI: Transparent bridge - 0000:00:1e.0
[4294668.454000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.458000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
[4294668.461000] ACPI: Power Resource [URP1] (off)
[4294668.461000] ACPI: Power Resource [URP2] (off)
[4294668.461000] ACPI: Power Resource [FDDP] (off)
[4294668.461000] ACPI: Power Resource [LPTP] (off)
[4294668.462000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[4294668.463000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[4294668.463000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[4294668.463000] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[4294668.464000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 14 15)
[4294668.464000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[4294668.464000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[4294668.464000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12 14 15)
[4294668.465000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.465000] pnp: PnP ACPI init
[4294668.465000] pnp: PnPACPI: unknown resource type 7
[4294668.465000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294668.465000] pnp: PnPACPI: unknown resource type 7
[4294668.465000] pnp: PnPACPI: METHOD_NAME__CRS failure for INT0800
[4294668.465000] pnp: PnPACPI: unknown resource type 7
[4294668.465000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200
[4294668.465000] pnp: PnPACPI: unknown resource type 7
[4294668.465000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00
[4294668.465000] pnp: PnPACPI: unknown resource type 7
[4294668.465000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800
[4294668.465000] pnp: PnPACPI: unknown resource type 7
[4294668.465000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
[4294668.465000] pnp: PnPACPI: unknown resource type 7
[4294668.465000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0f13
[4294668.465000] pnp: PnPACPI: unknown resource type 7
[4294668.465000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303
[4294668.465000] pnp: PnPACPI: unknown resource type 7
[4294668.465000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0700
[4294668.466000] pnp: PnPACPI: unknown resource type 7
[4294668.466000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0501
[4294668.466000] pnp: PnPACPI: unknown resource type 7
[4294668.466000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0501
[4294668.467000] pnp: PnPACPI: unknown resource type 7
[4294668.467000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0401
[4294668.468000] pnp: PnP ACPI: found 0 devices
[4294668.468000] PnPBIOS: Disabled by ACPI PNP
[4294668.468000] PCI: Using ACPI for IRQ routing
[4294668.468000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294668.472000] PCI: Bridge: 0000:00:01.0
[4294668.472000]   IO window: b000-bfff
[4294668.472000]   MEM window: ffc00000-ffcfffff
[4294668.472000]   PREFETCH window: b7f00000-f7efffff
[4294668.472000] PCI: Bridge: 0000:00:1e.0
[4294668.472000]   IO window: c000-cfff
[4294668.472000]   MEM window: ffd00000-ffdfffff
[4294668.472000]   PREFETCH window: disabled.
[4294668.473000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294668.473000] audit: initializing netlink socket (disabled)
[4294668.473000] audit(1144102105.471:1): initialized
[4294668.473000] VFS: Disk quotas dquot_6.5.1
[4294668.473000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.474000] Initializing Cryptographic API
[4294668.474000] io scheduler noop registered
[4294668.474000] io scheduler anticipatory registered
[4294668.474000] io scheduler deadline registered
[4294668.474000] io scheduler cfq registered
[4294668.474000] isapnp: Scanning for PnP cards...
[4294668.831000] isapnp: No Plug & Play device found
[4294668.855000] PNP: No PS/2 controller found. Probing ports directly.
[4294668.856000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.856000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.856000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294668.856000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.856000] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[4294668.860000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294668.860000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294668.860000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294668.860000] ACPI: bus type ide registered
[4294668.860000] mice: PS/2 mouse device common for all mice
[4294668.860000] EISA: Probing bus 0 at eisa.0
[4294668.860000] EISA: Detected 0 cards.
[4294668.860000] NET: Registered protocol family 2
[4294668.871000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
[4294668.871000] TCP established hash table entries: 32768 (order: 6, 393216 bytes)
[4294668.871000] TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
[4294668.871000] TCP: Hash tables configured (established 32768 bind 32768)
[4294668.871000] TCP reno registered
[4294668.871000] TCP bic registered
[4294668.871000] NET: Registered protocol family 1
[4294668.871000] NET: Registered protocol family 8
[4294668.871000] NET: Registered protocol family 20
[4294668.871000] Starting balanced_irq
[4294668.872000] Using IPI No-Shortcut mode
[4294668.872000] ACPI wakeup devices: 
[4294668.872000] USB1 USB2 USB3 USB4 EHCI CSAB ICHB PS2M PS2K  MC9 
[4294668.872000] ACPI: (supports S0 S1 S4 S5)
[4294668.872000] Freeing unused kernel memory: 328k freed
[4294668.882000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294668.950000] vga16fb: initializing
[4294668.950000] vga16fb: mapped to 0xc00a0000
[4294669.060000] Console: switching to colour frame buffer device 80x25
[4294669.060000] fb0: VGA16 VGA frame buffer device
[4294670.091000] Capability LSM initialized
[4294670.188000] ACPI: Processor [CPU1] (supports 8 throttling states)
[4294670.188000] ACPI: Processor [CPU2] (supports 8 throttling states)
[4294670.881000] ICH5: IDE controller at PCI slot 0000:00:1f.1
[4294670.881000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[4294670.881000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
[4294670.881000] ICH5: chipset revision 2
[4294670.881000] ICH5: not 100% native mode: will probe irqs later
[4294670.881000]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[4294670.881000]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
[4294670.881000] Probing IDE interface ide0...
[4294671.146000] hda: Maxtor 6Y120L0, ATA DISK drive
[4294671.759000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294671.759000] Probing IDE interface ide1...
[4294672.431000] hdc: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive
[4294673.146000] hdd: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive
[4294673.203000] ide1 at 0x170-0x177,0x376 on irq 15
[4294673.220000] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
[4294673.220000] Uniform CD-ROM driver Revision: 3.20
[4294673.222000] hda: max request size: 128KiB
[4294673.223000] hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[4294673.223000] hda: cache flushes supported
[4294673.224000] hdd: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
[4294673.224000]  hda: hda1 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 >
[4294673.710000] usbcore: registered new driver usbfs
[4294673.710000] usbcore: registered new driver hub
[4294673.715000] USB Universal Host Controller Interface driver v2.3
[4294673.716000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
[4294673.716000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294673.716000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294673.718000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294673.718000] uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000e000
[4294673.721000] hub 1-0:1.0: USB hub found
[4294673.722000] hub 1-0:1.0: 2 ports detected
[4294673.823000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
[4294673.823000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294673.823000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294673.823000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294673.823000] uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000e400
[4294673.824000] hub 2-0:1.0: USB hub found
[4294673.824000] hub 2-0:1.0: 2 ports detected
[4294673.925000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
[4294673.925000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294673.925000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294673.925000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294673.925000] uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000e800
[4294673.926000] hub 3-0:1.0: USB hub found
[4294673.926000] hub 3-0:1.0: 2 ports detected
[4294674.027000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 177
[4294674.027000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294674.027000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294674.027000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294674.027000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000ec00
[4294674.028000] hub 4-0:1.0: USB hub found
[4294674.028000] hub 4-0:1.0: 2 ports detected
[4294674.131000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
[4294674.131000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294674.131000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294674.131000] ehci_hcd 0000:00:1d.7: debug port 1
[4294674.131000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294674.131000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294674.131000] ehci_hcd 0000:00:1d.7: irq 193, io mem 0xffeffc00
[4294674.135000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294674.135000] hub 5-0:1.0: USB hub found
[4294674.135000] hub 5-0:1.0: 8 ports detected
[4294674.416000] Attempting manual resume
[4294674.444000] EXT3-fs: mounted filesystem with ordered data mode.
[4294674.444000] kjournald starting.  Commit interval 5 seconds
[4294674.444000] usb 5-6: new high speed USB device using ehci_hcd and address 2
[4294687.009000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294687.031000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294687.044000] Linux agpgart interface v0.101 (c) Dave Jones
[4294687.047000] agpgart: Detected an Intel 865 Chipset.
[4294687.053000] agpgart: AGP aperture is 64M @ 0xf8000000
[4294687.095000] hw_random: RNG not detected
[4294687.376000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
[4294687.376000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294687.581000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
[4294687.581000] e100: Copyright(c) 1999-2005 Intel Corporation
[4294687.611000] SCSI subsystem initialized
[4294687.619000] Initializing USB Mass Storage driver...
[4294687.620000] scsi0 : SCSI emulation for USB Mass Storage devices
[4294687.620000] usb-storage: device found at 2
[4294687.620000] usb-storage: waiting for device to settle before scanning
[4294687.620000] usbcore: registered new driver usb-storage
[4294687.620000] USB Mass Storage support registered.
[4294687.687000] intel8x0_measure_ac97_clock: measured 50262 usecs
[4294687.687000] intel8x0: clocking to 48000
[4294687.688000] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 209
[4294687.711000] e100: eth0: e100_probe: addr 0xffdff000, irq 209, MAC addr 00:0C:76:14:8D:41
[4294687.778000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[4294687.790000] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1
[4294687.833000] ts: Compaq touchscreen protocol output
[4294688.148000] NET: Registered protocol family 10
[4294688.148000] lo: Disabled Privacy Extensions
[4294688.148000] IPv6 over IPv4 tunneling driver
[4294688.196000] Intel ISA PCIC probe: not found.
[4294688.305000] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[4294688.306000] parport0: irq 7 detected
[4294688.389000] lp0: using parport0 (polling).
[4294688.795000] Linux video capture interface: v1.00
[4294688.813000] usbcore: registered new driver ov511
[4294688.813000] drivers/usb/media/ov511/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver
[4294688.863000] usbcore: registered new driver ov51x
[4294688.863000] /home/cyril/ov51x-jpeg-0.5.1/ov51x.c: v1.65-1.11-mark : ov51x USB Camera Driver
[4294688.894000] /home/cyril/ov51x-jpeg-0.5.1/ov519_decomp.c: v1.4 : OV519 JPEG Decompression Module
[4294688.962000] Adding 1076312k swap on /dev/hda5.  Priority:-1 extents:1 across:1076312k
[4294689.021000] EXT3 FS on hda9, internal journal
[4294689.186000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294689.186000] md: bitmap version 4.39
[4294689.650000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294689.904000] cdrom: open failed.
[4294690.371000] cdrom: open failed.
[4294690.390000] cdrom: open failed.
[4294691.551000] kjournald starting.  Commit interval 5 seconds
[4294691.551000] EXT3 FS on hda10, internal journal
[4294691.551000] EXT3-fs: mounted filesystem with ordered data mode.
[4294691.560000] kjournald starting.  Commit interval 5 seconds
[4294691.560000] EXT3 FS on hda6, internal journal
[4294691.560000] EXT3-fs: mounted filesystem with ordered data mode.
[4294691.578000] kjournald starting.  Commit interval 5 seconds
[4294691.578000] EXT3 FS on hda7, internal journal
[4294691.578000] EXT3-fs: mounted filesystem with ordered data mode.
[4294691.595000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[4294691.595000] kjournald starting.  Commit interval 5 seconds
[4294691.595000] EXT3 FS on hda8, internal journal
[4294691.595000] EXT3-fs: mounted filesystem with ordered data mode.
[4294691.678000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[4294691.750000] NTFS volume version 3.1.
[4294692.623000]   Vendor: ST330083  Model: 1A                Rev:  0 0
[4294692.623000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[4294692.627000] usb-storage: device scan complete
[4294692.753000] SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
[4294692.753000] sda: assuming drive cache: write through
[4294692.755000] SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
[4294692.755000] sda: assuming drive cache: write through
[4294692.755000]  sda: sda1
[4294692.779000] sd 0:0:0:0: Attached scsi disk sda
[4294692.803000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294695.005000] ACPI: Power Button (FF) [PWRF]
[4294695.005000] ACPI: Power Button (CM) [PWRB]
[4294695.106000] ibm_acpi: ec object not found
[4294698.568000] eth0: no IPv6 routers present
[4294699.350000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294699.350000] apm: disabled - APM is not SMP safe.
[4294700.603000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294700.603000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294700.603000] ide: failed opcode was: 0xec
[4294700.632000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294700.632000] hdd: drive_cmd: error=0x04 { AbortedCommand }
[4294700.632000] ide: failed opcode was: 0xec
[4294700.658000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294700.658000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294700.658000] ide: failed opcode was: 0xec
[4294700.682000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294700.682000] hdd: drive_cmd: error=0x04 { AbortedCommand }
[4294700.682000] ide: failed opcode was: 0xec
[4294701.143000] Bluetooth: Core ver 2.8
[4294701.143000] NET: Registered protocol family 31
[4294701.143000] Bluetooth: HCI device and connection manager initialized
[4294701.143000] Bluetooth: HCI socket layer initialized
[4294701.168000] Bluetooth: L2CAP ver 2.8
[4294701.168000] Bluetooth: L2CAP socket layer initialized
[4294701.171000] Bluetooth: RFCOMM socket layer initialized
[4294701.171000] Bluetooth: RFCOMM TTY layer initialized
[4294701.171000] Bluetooth: RFCOMM ver 1.7
[4294703.915000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[4294703.918000] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[4294703.918000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
[4294703.918000] [fglrx] module loaded - fglrx 8.23.7 [Mar  6 2006] on minor 0
[4294704.895000] [fglrx] Kernel AGP support doesn't provide agplock functionality.
[4294704.895000] [fglrx] AGP detected, AgpState   = 0x1f004a1b (hardware caps of chipset)
[4294704.896000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294704.896000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294704.896000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[4294704.896000] [fglrx] AGP enabled,  AgpCommand = 0x1f004312 (selected caps)
[4294704.905000] [fglrx] free  AGP = 54800384
[4294704.905000] [fglrx] max   AGP = 54800384
[4294704.905000] [fglrx] free  LFB = 116387840
[4294704.905000] [fglrx] max   LFB = 116387840
[4294704.905000] [fglrx] free  Inv = 0
[4294704.905000] [fglrx] max   Inv = 0
[4294704.905000] [fglrx] total Inv = 0
[4294704.905000] [fglrx] total TIM = 0
[4294704.905000] [fglrx] total FB  = 0
[4294704.905000] [fglrx] total AGP = 16384
[4295030.347000] NTFS-fs error (device hda1): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set cp437.  You might want to try to use the mount option nls=utf8.
[4295030.347000] NTFS-fs warning (device hda1): ntfs_filldir(): Skipping unrepresentable inode 0x38d6.
[4295030.689000] NTFS-fs error (device hda1): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set cp437.  You might want to try to use the mount option nls=utf8.
[4295030.690000] NTFS-fs warning (device hda1): ntfs_filldir(): Skipping unrepresentable inode 0x38b4.
[4295041.880000] NTFS-fs error (device hda1): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set cp437.  You might want to try to use the mount option nls=utf8.
[4295041.880000] NTFS-fs warning (device hda1): ntfs_filldir(): Skipping unrepresentable inode 0x15a9.
[4295109.985000] NTFS-fs error (device hda1): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set cp437.  You might want to try to use the mount option nls=utf8.
[4295109.985000] NTFS-fs warning (device hda1): ntfs_filldir(): Skipping unrepresentable inode 0x38d6.
[4295110.018000] NTFS-fs error (device hda1): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set cp437.  You might want to try to use the mount option nls=utf8.
[4295110.018000] NTFS-fs warning (device hda1): ntfs_filldir(): Skipping unrepresentable inode 0x38b4.
[4295111.274000] NTFS-fs error (device hda1): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set cp437.  You might want to try to use the mount option nls=utf8.
[4295111.274000] NTFS-fs warning (device hda1): ntfs_filldir(): Skipping unrepresentable inode 0x15a9.