[ 0.000000] Bootdata ok (command line is BOOT_IMAGE=/casper/vmlinuz boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash --) [ 0.000000] Linux version 2.6.17-5-amd64-generic (root@crested) (gcc version 4.1.2 20060715 (prerelease) (Ubuntu 4.1.1-9ubuntu1)) #3 SMP Mon Jul 17 20:16:54 UTC 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 K8T890 ) @ 0x00000000000f7c10 [ 0.000000] ACPI: RSDT (v001 K8T890 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fef3040 [ 0.000000] ACPI: FADT (v001 K8T890 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fef30c0 [ 0.000000] ACPI: MCFG (v001 K8T890 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fef9d00 [ 0.000000] ACPI: MADT (v001 K8T890 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fef9c40 [ 0.000000] ACPI: DSDT (v001 K8T890 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003fef0000 [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fef0000 [ 0.000000] On node 0 totalpages: 256916 [ 0.000000] DMA zone: 2664 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 254252 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:15 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000) [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ c8000000 size 128 MB [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 0.000000] time.c: Detected 2247.510 MHz processor. [ 33.651083] Console: colour VGA+ 80x25 [ 33.651836] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 33.652965] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 33.664367] Memory: 1019880k/1047488k available (2102k kernel code, 27220k reserved, 1169k data, 188k init) [ 33.743700] Calibrating delay using timer specific routine.. 4500.10 BogoMIPS (lpj=9000219) [ 33.743752] Security Framework v1.0.0 initialized [ 33.743758] SELinux: Disabled at boot. [ 33.743777] Mount-cache hash table entries: 256 [ 33.743914] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 33.743916] CPU: L2 Cache: 512K (64 bytes/line) [ 33.743919] CPU 0/0(1) -> Node 0 -> Core 0 [ 33.743933] SMP alternatives: switching to UP code [ 33.744087] Freeing SMP alternatives: 20k freed [ 33.744206] checking if image is initramfs... it is [ 34.176257] Freeing initrd memory: 6124k freed [ 34.184893] ACPI: Looking for DSDT ... not found! [ 34.237657] Using local APIC timer interrupts. [ 34.282095] result 12769943 [ 34.282097] Detected 12.769 MHz APIC timer. [ 34.283022] Brought up 1 CPUs [ 34.283148] testing NMI watchdog ... OK. [ 34.323173] migration_cost=0 [ 34.323382] NET: Registered protocol family 16 [ 34.323405] ACPI: bus type pci registered [ 34.326497] PCI: Using MMCONFIG at e0000000 [ 34.326533] PCI: No mmconfig possible on device 0:18 [ 34.327177] ACPI: Subsystem revision 20060127 [ 34.336325] ACPI: Interpreter enabled [ 34.336329] ACPI: Using IOAPIC for interrupt routing [ 34.336833] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 34.336836] PCI: Probing PCI hardware (bus 00) [ 34.341593] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1 [ 34.341843] PCI: Quirk-MSI-K8T Soundcard On [ 34.341845] PCI: Unexpected Value in PCI-Register: no Change! [ 34.342065] Boot video device is 0000:02:00.0 [ 34.342448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 34.467505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT] [ 34.468080] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 34.468644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 34.469206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 34.469772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 34.470470] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12) [ 34.470861] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 34.471234] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5 [ 34.471591] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 34.471948] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12) [ 34.472300] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0 [ 34.472648] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *5 [ 34.473001] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 *10 11 12) [ 34.473548] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 34.474075] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 34.474473] ACPI: PCI Interrupt Link [ALKC] (IRQs *22) [ 34.474949] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled. [ 34.477706] Linux Plug and Play Support v0.97 (c) Adam Belay [ 34.477717] pnp: PnP ACPI init [ 34.483222] pnp: PnP ACPI: found 13 devices [ 34.483263] PCI: Using ACPI for IRQ routing [ 34.483267] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 34.483275] PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 [ 34.483328] PCI: Cannot allocate resource region 8 of bridge 0000:00:03.1 [ 34.483378] PCI: Cannot allocate resource region 8 of bridge 0000:00:03.2 [ 34.483428] PCI: Cannot allocate resource region 8 of bridge 0000:00:03.3 [ 34.483646] agpgart: Detected AGP bridge 0 [ 34.488906] agpgart: AGP aperture is 128M @ 0xc8000000 [ 34.488927] PCI-DMA: Disabling IOMMU. [ 34.489409] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved [ 34.489412] pnp: 00:01: ioport range 0x5000-0x500f has been reserved [ 34.489583] PCI: Bridge: 0000:00:01.0 [ 34.489585] IO window: a000-afff [ 34.489589] MEM window: df800000-df8fffff [ 34.489592] PREFETCH window: df700000-df7fffff [ 34.489597] PCI: Bridge: 0000:00:02.0 [ 34.489599] IO window: 9000-9fff [ 34.489604] MEM window: df600000-df6fffff [ 34.489607] PREFETCH window: d0000000-d7ffffff [ 34.489611] PCI: Bridge: 0000:00:03.0 [ 34.489613] IO window: 8000-8fff [ 34.489617] MEM window: disabled. [ 34.489620] PREFETCH window: df400000-df4fffff [ 34.489624] PCI: Bridge: 0000:00:03.1 [ 34.489627] IO window: d000-dfff [ 34.489630] MEM window: disabled. [ 34.489634] PREFETCH window: dfd00000-dfdfffff [ 34.489637] PCI: Bridge: 0000:00:03.2 [ 34.489640] IO window: c000-cfff [ 34.489643] MEM window: disabled. [ 34.489647] PREFETCH window: dfb00000-dfbfffff [ 34.489651] PCI: Bridge: 0000:00:03.3 [ 34.489653] IO window: b000-bfff [ 34.489657] MEM window: disabled. [ 34.489660] PREFETCH window: df900000-df9fffff [ 34.489673] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 34.489688] GSI 16 sharing vector 0xA9 and IRQ 16 [ 34.489691] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 [ 34.489696] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 34.489707] PCI: Enabling device 0000:00:03.0 (0000 -> 0003) [ 34.489710] GSI 17 sharing vector 0xB1 and IRQ 17 [ 34.489712] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177 [ 34.489718] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 34.489728] PCI: Enabling device 0000:00:03.1 (0000 -> 0003) [ 34.489732] GSI 18 sharing vector 0xB9 and IRQ 18 [ 34.489734] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 185 [ 34.489739] PCI: Setting latency timer of device 0000:00:03.1 to 64 [ 34.489750] PCI: Enabling device 0000:00:03.2 (0000 -> 0003) [ 34.489753] GSI 19 sharing vector 0xC1 and IRQ 19 [ 34.489756] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 193 [ 34.489761] PCI: Setting latency timer of device 0000:00:03.2 to 64 [ 34.489771] PCI: Enabling device 0000:00:03.3 (0000 -> 0003) [ 34.489774] GSI 20 sharing vector 0xC9 and IRQ 20 [ 34.489777] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 201 [ 34.489782] PCI: Setting latency timer of device 0000:00:03.3 to 64 [ 34.489814] NET: Registered protocol family 2 [ 34.526701] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 34.526908] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 34.528396] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 34.529152] TCP: Hash tables configured (established 131072 bind 65536) [ 34.529155] TCP reno registered [ 34.529462] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 34.529740] audit: initializing netlink socket (disabled) [ 34.529750] audit(1156328987.884:1): initialized [ 34.529871] VFS: Disk quotas dquot_6.5.1 [ 34.529890] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 34.529939] Initializing Cryptographic API [ 34.529943] io scheduler noop registered [ 34.529949] io scheduler anticipatory registered [ 34.529954] io scheduler deadline registered [ 34.529968] io scheduler cfq registered (default) [ 34.530391] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 [ 34.530398] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 34.530430] assign_interrupt_mode Found MSI capability [ 34.530486] Allocate Port Service[0000:00:02.0:pcie00] [ 34.530513] Allocate Port Service[0000:00:02.0:pcie01] [ 34.530535] Allocate Port Service[0000:00:02.0:pcie03] [ 34.530562] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177 [ 34.530567] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 34.530598] assign_interrupt_mode Found MSI capability [ 34.530651] Allocate Port Service[0000:00:03.0:pcie00] [ 34.530675] Allocate Port Service[0000:00:03.0:pcie01] [ 34.530695] Allocate Port Service[0000:00:03.0:pcie03] [ 34.530721] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 185 [ 34.530726] PCI: Setting latency timer of device 0000:00:03.1 to 64 [ 34.530757] assign_interrupt_mode Found MSI capability [ 34.530797] Allocate Port Service[0000:00:03.1:pcie00] [ 34.530821] Allocate Port Service[0000:00:03.1:pcie01] [ 34.530841] Allocate Port Service[0000:00:03.1:pcie03] [ 34.530866] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 193 [ 34.530871] PCI: Setting latency timer of device 0000:00:03.2 to 64 [ 34.530902] assign_interrupt_mode Found MSI capability [ 34.530943] Allocate Port Service[0000:00:03.2:pcie00] [ 34.530964] Allocate Port Service[0000:00:03.2:pcie01] [ 34.530987] Allocate Port Service[0000:00:03.2:pcie03] [ 34.531013] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 201 [ 34.531018] PCI: Setting latency timer of device 0000:00:03.3 to 64 [ 34.531049] assign_interrupt_mode Found MSI capability [ 34.531090] Allocate Port Service[0000:00:03.3:pcie00] [ 34.531110] Allocate Port Service[0000:00:03.3:pcie01] [ 34.531135] Allocate Port Service[0000:00:03.3:pcie03] [ 34.548106] Real Time Clock Driver v1.12ac [ 34.548145] Linux agpgart interface v0.101 (c) Dave Jones [ 34.548148] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 34.548254] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 34.548699] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 34.548865] mice: PS/2 mouse device common for all mice [ 34.548905] isa bounce pool size: 16 pages [ 34.549288] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize [ 34.549450] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 34.549453] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 34.549708] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 34.551441] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 34.551503] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 34.551708] TCP bic registered [ 34.551715] NET: Registered protocol family 1 [ 34.551721] NET: Registered protocol family 8 [ 34.551722] NET: Registered protocol family 20 [ 34.552057] ACPI wakeup devices: [ 34.552059] PCI0 USB0 USB1 USB2 USB3 USB4 USB5 USB6 USB7 AC97 MC97 PEXG PEX0 PEX1 PEX2 PEX3 UAR1 [ 34.552067] ACPI: (supports S0 S3 S4 S5) [ 34.552107] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 34.552124] Freeing unused kernel memory: 188k freed [ 34.577230] input: AT Translated Set 2 keyboard as /class/input/input0 [ 34.593685] vga16fb: initializing [ 34.593689] vga16fb: mapped to 0xffff8100000a0000 [ 34.652299] Console: switching to colour frame buffer device 80x25 [ 34.652303] fb0: VGA16 VGA frame buffer device [ 35.686243] Capability LSM initialized [ 36.097225] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [ 36.097574] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 36.097579] GSI 21 sharing vector 0x42 and IRQ 21 [ 36.097582] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 66 [ 36.097590] PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 2 [ 36.097614] VP_IDE: chipset revision 6 [ 36.097616] VP_IDE: not 100% native mode: will probe irqs later [ 36.097626] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 36.097633] ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:pio [ 36.097644] ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:pio, hdd:DMA [ 36.097652] Probing IDE interface ide0... [ 36.524017] hda: WDC WD1200JB-00EVA0, ATA DISK drive [ 37.201022] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 37.212942] Probing IDE interface ide1... [ 38.365507] hdd: PIONEER DVD-RW DVR-109, ATAPI CD/DVD-ROM drive [ 38.425592] ide1 at 0x170-0x177,0x376 on irq 15 [ 38.432314] hda: max request size: 512KiB [ 38.438690] hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) [ 38.440400] hda: cache flushes supported [ 38.440440] hda: hda1 hda2 hda3 hda4 < hda5 > [ 38.493368] hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66) [ 38.493375] Uniform CD-ROM driver Revision: 3.20 [ 39.083602] SCSI subsystem initialized [ 39.087093] libata version 1.20 loaded. [ 39.088624] sata_via 0000:00:0c.0: version 1.1 [ 39.088639] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 20 (level, low) -> IRQ 66 [ 39.088652] sata_via 0000:00:0c.0: routed to hard irq line 10 [ 39.088699] ata1: PATA max UDMA/133 cmd 0xFE00 ctl 0xFE0A bmdma 0xFA00 irq 66 [ 39.088717] ata2: PATA max UDMA/133 cmd 0xFD00 ctl 0xFD0A bmdma 0xFA08 irq 66 [ 39.088733] ata3: PATA max UDMA/133 cmd 0xFC00 ctl 0xFC0A bmdma 0xFA10 irq 66 [ 39.258834] ata1: disabling port [ 39.258840] scsi0 : sata_via [ 39.436133] ata2: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:203f [ 39.436139] ata2: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48 [ 39.448113] ata2: dev 0 configured for UDMA/100 [ 39.448115] scsi1 : sata_via [ 39.618895] ata3: disabling port [ 39.618899] scsi2 : sata_via [ 39.619466] Vendor: ATA Model: HDS722525VLSA80 Rev: V36O [ 39.619473] Type: Direct-Access ANSI SCSI revision: 05 [ 39.619846] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 66 [ 39.619861] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 39.619894] ata4: SATA max UDMA/133 cmd 0xF900 ctl 0xF802 bmdma 0xF500 irq 66 [ 39.619909] ata5: SATA max UDMA/133 cmd 0xF700 ctl 0xF602 bmdma 0xF508 irq 66 [ 39.624529] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 39.624540] sda: Write Protect is off [ 39.624542] sda: Mode Sense: 00 3a 00 00 [ 39.624552] SCSI device sda: drive cache: write back [ 39.624597] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 39.624603] sda: Write Protect is off [ 39.624605] sda: Mode Sense: 00 3a 00 00 [ 39.624614] SCSI device sda: drive cache: write back [ 39.624618] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 39.675903] sd 1:0:0:0: Attached scsi disk sda [ 39.790189] scsi3 : sata_via [ 39.957883] scsi4 : sata_via [ 40.059905] usbcore: registered new driver usbfs [ 40.059923] usbcore: registered new driver hub [ 40.061259] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 40.061265] GSI 22 sharing vector 0x4A and IRQ 22 [ 40.061268] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 74 [ 40.061355] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 40.061492] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 40.061535] ehci_hcd 0000:00:10.4: irq 74, io mem 0xdfffc000 [ 40.061542] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 40.061598] usb usb1: configuration #1 chosen from 1 choice [ 40.061614] hub 1-0:1.0: USB hub found [ 40.061620] hub 1-0:1.0: 8 ports detected [ 40.066925] USB Universal Host Controller Interface driver v3.0 [ 40.144700] ieee1394: Initialized config rom entry `ip1394' [ 40.167205] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 74 [ 40.167212] PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 10 [ 40.167237] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 40.167325] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 40.167346] uhci_hcd 0000:00:10.0: irq 74, io base 0x0000f300 [ 40.167474] usb usb2: configuration #1 chosen from 1 choice [ 40.167550] hub 2-0:1.0: USB hub found [ 40.167557] hub 2-0:1.0: 2 ports detected [ 40.274972] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 74 [ 40.274978] PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 10 [ 40.275002] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 40.275082] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 40.275103] uhci_hcd 0000:00:10.1: irq 74, io base 0x0000f200 [ 40.275234] usb usb3: configuration #1 chosen from 1 choice [ 40.275311] hub 3-0:1.0: USB hub found [ 40.275318] hub 3-0:1.0: 2 ports detected [ 40.382753] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 74 [ 40.382758] PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 10 [ 40.382778] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 40.382860] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 40.382877] uhci_hcd 0000:00:10.2: irq 74, io base 0x0000f100 [ 40.382995] usb usb4: configuration #1 chosen from 1 choice [ 40.383074] hub 4-0:1.0: USB hub found [ 40.383079] hub 4-0:1.0: 2 ports detected [ 40.414615] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 40.490609] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 74 [ 40.490614] PCI: VIA IRQ fixup for 0000:00:10.3, from 11 to 10 [ 40.490634] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 40.490711] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 40.490728] uhci_hcd 0000:00:10.3: irq 74, io base 0x0000f000 [ 40.490848] usb usb5: configuration #1 chosen from 1 choice [ 40.490928] hub 5-0:1.0: USB hub found [ 40.490934] hub 5-0:1.0: 2 ports detected [ 40.554837] usb 1-4: configuration #1 chosen from 1 choice [ 40.554957] hub 1-4:1.0: USB hub found [ 40.555067] hub 1-4:1.0: 4 ports detected [ 40.600857] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 21 (level, low) -> IRQ 74 [ 40.654011] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[74] MMIO=[dffff000-dffff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 41.937086] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d0000d28403] [ 42.048475] usb 1-4.1: new full speed USB device using ehci_hcd and address 3 [ 42.148776] usb 1-4.1: configuration #1 chosen from 1 choice [ 42.356095] usb 1-4.2: new low speed USB device using ehci_hcd and address 4 [ 42.460765] usb 1-4.2: configuration #1 chosen from 1 choice [ 42.465977] usbcore: registered new driver hiddev [ 42.467212] input: HID 0d8c:000c as /class/input/input1 [ 42.467225] input: USB HID v1.00 Device [HID 0d8c:000c] on usb-0000:00:10.4-4.1 [ 42.469925] input: USB OpticalWheel Mouse as /class/input/input2 [ 42.469996] input: USB HID v1.10 Mouse [USB OpticalWheel Mouse] on usb-0000:00:10.4-4.2 [ 42.470003] usbcore: registered new driver usbhid [ 42.470006] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 42.950396] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 42.985559] ISO 9660 Extensions: RRIP_1991A [ 43.023314] loop: loaded (max 8 devices) [ 43.034545] Registering unionfs 1.1.4 [ 43.147037] squashfs: version 3.0 (2006/03/15) Phillip Lougher [ 91.769781] GSI 23 sharing vector 0x52 and IRQ 23 [ 91.769785] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 22 (level, low) -> IRQ 82 [ 91.769789] IC PLUS IP1000 1000/100/10 based NIC found. [ 91.769791] Bus 0 Slot e [ 91.769858] Ethernet device registered as: eth0 [ 91.933701] Linux Tulip driver version 1.1.14 (May 6, 2006) [ 91.933749] GSI 24 sharing vector 0x5A and IRQ 24 [ 91.933753] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 90 [ 91.934215] tulip0: MII transceiver #1 config 1000 status 786d advertising 0501. [ 91.938896] eth1: ADMtek Comet rev 17 at Port 0xee00, 00:12:17:58:8D:0C, IRQ 90. [ 91.972445] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 92.635998] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 93.681161] parport: PnPBIOS parport detected. [ 93.681274] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 94.030731] logips2pp: Detected unknown logitech mouse model 62 [ 94.144180] usbcore: registered new driver snd-usb-audio [ 99.153875] Link speed = undefined! [ 99.179628] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input3 [ 99.635306] ts: Compaq touchscreen protocol output [ 99.708638] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 99.881636] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 99.881641] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 82 [ 99.881972] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 101.236355] NET: Registered protocol family 17 [ 102.811188] 0000:00:08.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113) [ 102.811199] eth1: Setting full-duplex based on MII#1 link partner capability of 45e1. [ 106.886711] ACPI: Power Button (FF) [PWRF] [ 106.886722] ACPI: Power Button (CM) [PWRB] [ 106.982588] ibm_acpi: ec object not found [ 107.004800] pcc_acpi: loading... [ 107.712733] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2) [ 107.717416] powernow-k8: BIOS error - no PSB or ACPI _PSS objects [ 110.760469] NET: Registered protocol family 10 [ 110.760556] lo: Disabled Privacy Extensions [ 110.760714] IPv6 over IPv4 tunneling driver [ 111.681397] lp0: using parport0 (interrupt-driven). [ 112.065167] ppdev: user-space parallel port driver [ 116.934186] [drm] Initialized drm 1.0.1 20051102 [ 117.244257] GSI 25 sharing vector 0x62 and IRQ 25 [ 117.244262] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 98 [ 117.244645] [drm] Initialized radeon 1.24.0 20060225 on minor 0 [ 120.928608] eth1: no IPv6 routers present [ 121.152303] eth0: no IPv6 routers present [ 126.153798] Bluetooth: Core ver 2.8 [ 126.153802] NET: Registered protocol family 31 [ 126.153804] Bluetooth: HCI device and connection manager initialized [ 126.153818] Bluetooth: HCI socket layer initialized [ 126.198347] Bluetooth: L2CAP ver 2.8 [ 126.198350] Bluetooth: L2CAP socket layer initialized [ 126.517643] Bluetooth: RFCOMM socket layer initialized [ 126.517660] Bluetooth: RFCOMM TTY layer initialized [ 126.517662] Bluetooth: RFCOMM ver 1.7 [ 126.522332] [drm] Setting GART location based on new memory map [ 126.522570] [drm] Loading R300 Microcode [ 126.522605] [drm] writeback test succeeded in 1 usecs