[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: root=UUID=e694f233-ae0b-44ec-9013-5d0219af4026 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037ea0000 (usable) [ 0.000000] BIOS-e820: 0000000037ea0000 - 0000000037eac000 (ACPI data) [ 0.000000] BIOS-e820: 0000000037eac000 - 0000000037f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 229024) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7C40 checksum 0 [ 0.000000] ACPI: RSDP 000F7C40, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 37EA3ED4, 0034 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 37EABE3B, 0074 (r1 HP Piranha 6040000 ATI F4240) [ 0.000000] ACPI: DSDT 37EA3F08, 7F33 (r1 HP 309B 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 37EACFC0, 0040 [ 0.000000] ACPI: SSDT 37EABEAF, 00CF (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC 37EABF7E, 0046 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG 37EABFC4, 003C (r1 HP PORSCHE 6040000 LOHR 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000037ea0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 229024) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000037ea0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 229024 [ 0.000000] On node 0 totalpages: 228927 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1124 pages reserved [ 0.000000] DMA zone: 2819 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3075 pages used for memmap [ 0.000000] DMA32 zone: 221853 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 224672 [ 0.000000] Kernel command line: root=UUID=e694f233-ae0b-44ec-9013-5d0219af4026 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 7.906840] time.c: Detected 1794.827 MHz processor. [ 7.907726] Console: colour VGA+ 80x25 [ 7.907746] Checking aperture... [ 7.907750] CPU 0: aperture @ e392000000 size 32 MB [ 7.907752] Aperture too small (32 MB) [ 7.919661] No AGP bridge found [ 7.934093] Memory: 891340k/916096k available (2274k kernel code, 24368k reserved, 1181k data, 296k init) [ 7.934158] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 8.012745] Calibrating delay using timer specific routine.. 3593.30 BogoMIPS (lpj=7186609) [ 8.012789] Security Framework v1.0.0 initialized [ 8.012801] SELinux: Disabled at boot. [ 8.012905] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 8.014145] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 8.014765] Mount-cache hash table entries: 256 [ 8.014962] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 8.014965] CPU: L2 Cache: 512K (64 bytes/line) [ 8.014968] CPU 0/0 -> Node 0 [ 8.014993] SMP alternatives: switching to UP code [ 8.015312] Freeing SMP alternatives: 24k freed [ 8.015856] Early unpacking initramfs... done [ 8.345687] ACPI: Core revision 20070126 [ 8.345769] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 9.027025] Using local APIC timer interrupts. [ 9.082692] result 12464085 [ 9.082694] Detected 12.464 MHz APIC timer. [ 9.083836] Brought up 1 CPUs [ 9.084081] NET: Registered protocol family 16 [ 9.084188] ACPI: bus type pci registered [ 9.084196] PCI: Using configuration type 1 [ 9.084982] ACPI: EC: Look up EC in DSDT [ 9.085707] ACPI: EC: GPE=0x1a, ports=0x66, 0x62 [ 9.086727] ACPI: Interpreter enabled [ 9.086731] ACPI: (supports S0 S3 S4 S5) [ 9.086745] ACPI: Using IOAPIC for interrupt routing [ 9.132397] ACPI: EC: GPE=0x1a, ports=0x66, 0x62 [ 9.132438] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 9.132446] PCI: Probing PCI hardware (bus 00) [ 9.133605] PCI: Transparent bridge - 0000:00:14.4 [ 9.133645] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 9.133776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 9.133887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 9.134010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 9.135607] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 9.135710] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 9.135831] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 9.135931] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 9.136030] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 9.136129] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 9.136229] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 9.136328] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 9.136410] Linux Plug and Play Support v0.97 (c) Adam Belay [ 9.136428] pnp: PnP ACPI init [ 9.136437] ACPI: bus type pnp registered [ 9.159775] pnp: PnP ACPI: found 10 devices [ 9.159778] ACPI: ACPI bus type pnp unregistered [ 9.159838] PCI: Using ACPI for IRQ routing [ 9.159841] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 9.159850] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 [ 9.159896] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 [ 9.160038] NET: Registered protocol family 8 [ 9.160040] NET: Registered protocol family 20 [ 9.160167] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 9.160171] pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 9.160175] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 9.160183] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved [ 9.160186] pnp: 00:08: ioport range 0x40b-0x40b has been reserved [ 9.160189] pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 9.160192] pnp: 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 9.160195] pnp: 00:08: ioport range 0x870-0x87f has been reserved [ 9.160205] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 9.160208] pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved [ 9.160211] pnp: 00:09: iomem range 0x0-0xfff could not be reserved [ 9.160506] PCI: Bridge: 0000:00:01.0 [ 9.160509] IO window: 9000-9fff [ 9.160513] MEM window: c0100000-c01fffff [ 9.160516] PREFETCH window: c8000000-cfffffff [ 9.160520] PCI: Bridge: 0000:00:05.0 [ 9.160521] IO window: disabled. [ 9.160524] MEM window: disabled. [ 9.160526] PREFETCH window: disabled. [ 9.160529] PCI: Bridge: 0000:00:14.4 [ 9.160532] IO window: a000-afff [ 9.160539] MEM window: c0200000-c02fffff [ 9.160543] PREFETCH window: disabled. [ 9.160564] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 9.160619] NET: Registered protocol family 2 [ 9.163706] Time: tsc clocksource has been installed. [ 9.195756] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 9.196238] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) [ 9.199833] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 9.201017] TCP: Hash tables configured (established 131072 bind 65536) [ 9.201023] TCP reno registered [ 9.211829] checking if image is initramfs... it is [ 9.845918] Freeing initrd memory: 7213k freed [ 9.854817] audit: initializing netlink socket (disabled) [ 9.854834] audit(1193853590.260:1): initialized [ 9.856876] VFS: Disk quotas dquot_6.5.1 [ 9.856934] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 9.857049] io scheduler noop registered [ 9.857051] io scheduler anticipatory registered [ 9.857054] io scheduler deadline registered [ 9.857141] io scheduler cfq registered (default) [ 9.857149] PCI: MSI quirk detected. MSI deactivated. [ 9.857847] Boot video device is 0000:01:05.0 [ 9.858013] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 9.858034] assign_interrupt_mode Found MSI capability [ 9.858039] Allocate Port Service[0000:00:05.0:pcie00] [ 9.882258] Real Time Clock Driver v1.12ac [ 9.882351] Linux agpgart interface v0.102 (c) Dave Jones [ 9.882354] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 9.882944] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 9.882953] ACPI: PCI interrupt for device 0000:00:14.6 disabled [ 9.883518] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 9.883741] input: Macintosh mouse button emulation as /class/input/input0 [ 9.883811] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 9.905645] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 9.905651] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 9.905869] mice: PS/2 mouse device common for all mice [ 9.906018] TCP cubic registered [ 9.906972] NET: Registered protocol family 1 [ 9.907206] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 9.907216] Freeing unused kernel memory: 296k freed [ 9.939069] input: AT Translated Set 2 keyboard as /class/input/input1 [ 11.077299] AppArmor: AppArmor initialized<5>audit(1193853591.484:2): type=1505 info="AppArmor initialized" pid=1137 [ 11.083207] fuse init (API version 7.8) [ 11.087780] Failure registering capabilities with primary security module. [ 11.107320] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 11.107327] ACPI: Processor [CPU0] (supports 8 throttling states) [ 11.116045] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126] [ 11.117599] ACPI: Thermal Zone [THRM] (0 C) [ 11.684394] usbcore: registered new interface driver usbfs [ 11.684421] usbcore: registered new interface driver hub [ 11.684446] usbcore: registered new device driver usb [ 11.685218] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 11.685260] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 11.685419] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 11.685632] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 11.685657] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000 [ 11.736138] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 11.736145] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 11.747000] usb usb1: configuration #1 chosen from 1 choice [ 11.747036] hub 1-0:1.0: USB hub found [ 11.747052] hub 1-0:1.0: 4 ports detected [ 11.849476] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 11.849627] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 11.849698] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 11.849720] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000 [ 11.909430] usb usb2: configuration #1 chosen from 1 choice [ 11.909460] hub 2-0:1.0: USB hub found [ 11.909475] hub 2-0:1.0: 4 ports detected [ 11.911681] 8139too Fast Ethernet driver 0.9.28 [ 11.937218] Marking TSC unstable due to possible TSC halt in C2 [ 11.937228] Time: acpi_pm clocksource has been installed. [ 12.015352] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 12.015609] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 12.015683] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 12.015744] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000 [ 12.153039] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 12.153063] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 12.153216] usb usb3: configuration #1 chosen from 1 choice [ 12.153242] hub 3-0:1.0: USB hub found [ 12.153248] hub 3-0:1.0: 8 ports detected [ 12.257150] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 12.257172] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.257185] ATIIXP: chipset revision 0 [ 12.257187] ATIIXP: not 100% native mode: will probe irqs later [ 12.257197] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio [ 12.257213] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio [ 12.257223] Probing IDE interface ide0... [ 12.545110] hda: TOSHIBA MK8025GAS, ATA DISK drive [ 12.708537] usb 3-1: new high speed USB device using ehci_hcd and address 2 [ 12.840821] usb 3-1: configuration #1 chosen from 1 choice [ 12.841062] hub 3-1:1.0: USB hub found [ 12.841229] hub 3-1:1.0: 4 ports detected [ 13.216098] hda: selected mode 0x45 [ 13.216194] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 13.266704] Probing IDE interface ide1... [ 13.328043] usb 3-1.1: new full speed USB device using ehci_hcd and address 4 [ 13.443306] usb 3-1.1: configuration #1 chosen from 1 choice [ 13.659823] usb 3-1.2: new high speed USB device using ehci_hcd and address 5 [ 13.772219] usb 3-1.2: configuration #1 chosen from 1 choice [ 13.773611] usbcore: registered new interface driver hiddev [ 13.999807] hdc: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive [ 14.075308] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 14.284380] usb 2-2: configuration #1 chosen from 1 choice [ 14.289117] input: Plantronics Plantronics Headset as /class/input/input2 [ 14.289166] input: USB HID v1.00 Device [Plantronics Plantronics Headset] on usb-0000:00:13.2-1.1 [ 14.294511] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 [ 14.294531] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-2 [ 14.294546] usbcore: registered new interface driver usbhid [ 14.294550] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 14.294859] usbcore: registered new interface driver libusual [ 14.302897] SCSI subsystem initialized [ 14.304508] Initializing USB Mass Storage driver... [ 14.304662] scsi0 : SCSI emulation for USB Mass Storage devices [ 14.304714] usb-storage: device found at 5 [ 14.304716] usb-storage: waiting for device to settle before scanning [ 14.304729] usbcore: registered new interface driver usb-storage [ 14.304732] USB Mass Storage support registered. [ 14.335114] hdc: selected mode 0x22 [ 14.336028] ide1 at 0x170-0x177,0x376 on irq 15 [ 14.346126] libata version 2.21 loaded. [ 14.347510] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 14.348391] eth0: RealTek RTL8139 at 0xffffc200005f0000, 00:16:d4:41:06:69, IRQ 22 [ 14.348396] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 14.350444] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 14.358315] hda: max request size: 128KiB [ 14.365244] hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100) [ 14.368022] hda: cache flushes supported [ 14.368086] hda: hda1 hda2 hda3 hda4 < hda5 > [ 14.457540] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA [ 14.457550] Uniform CD-ROM driver Revision: 3.20 [ 14.920685] Attempting manual resume [ 14.920689] swsusp: Resume From Partition 3:5 [ 14.920691] PM: Checking swsusp image. [ 14.935402] PM: Resume from disk failed. [ 14.994265] kjournald starting. Commit interval 5 seconds [ 14.994277] EXT3-fs: mounted filesystem with ordered data mode. [ 19.298898] usb-storage: device scan complete [ 19.299511] scsi 0:0:0:0: Direct-Access Maxtor 6 L250R0 BAJ4 PQ: 0 ANSI: 2 [ 25.958096] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 25.963936] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 26.762893] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 27.111694] ieee80211_crypt: registered algorithm 'NULL' [ 27.118050] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 27.118055] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 27.236802] usbcore: registered new interface driver xpad [ 27.236808] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 27.267615] input: PC Speaker as /class/input/input4 [ 27.304377] bcm43xx driver [ 27.304503] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 27.353137] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 27.384213] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 27.385366] sd 0:0:0:0: [sda] Write Protect is off [ 27.385371] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00 [ 27.385375] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 27.390830] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 27.391445] sd 0:0:0:0: [sda] Write Protect is off [ 27.391448] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00 [ 27.391451] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 27.391458] sda: sda1 sda2 [ 27.423648] sd 0:0:0:0: [sda] Attached SCSI disk [ 27.438824] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 27.572431] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 27.637078] input: SynPS/2 Synaptics TouchPad as /class/input/input5 [ 27.647592] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 27.680120] usbcore: registered new interface driver snd-usb-audio [ 27.759191] MC'97 0 converters and GPIO not ready (0x1) [ 28.723639] lp: driver loaded but no devices found [ 28.791697] Adding 522072k swap on /dev/hda5. Priority:-1 extents:1 across:522072k [ 29.562101] EXT3 FS on hda3, internal journal [ 34.240109] No dock devices found. [ 34.297264] ACPI: Battery Slot [BAT1] (battery present) [ 34.345462] ACPI: AC Adapter [ACAD] (on-line) [ 34.425192] input: Power Button (FF) as /class/input/input6 [ 34.429884] ACPI: Power Button (FF) [PWRF] [ 34.458120] input: Sleep Button (FF) as /class/input/input7 [ 34.462788] ACPI: Sleep Button (FF) [SLPF] [ 34.491073] input: Lid Switch as /class/input/input8 [ 34.495757] ACPI: Lid Switch [LID] [ 34.524188] input: Power Button (CM) as /class/input/input9 [ 34.528868] ACPI: Power Button (CM) [PWRB] [ 34.553901] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 35.002639] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-32 processors (version 2.00.00) [ 35.002680] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x4 [ 35.002683] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6 [ 35.002686] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16 [ 35.004559] powernow-k8: ph2 null fid transition 0xa [ 36.823167] eth0: link down [ 36.961097] ppdev: user-space parallel port driver [ 37.754401] audit(1193868019.272:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4759 profile="/usr/sbin/cupsd" [ 39.268484] Failure registering capabilities with primary security module. [ 40.868347] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 40.872119] [fglrx] Maximum main memory to use for locked dma buffers: 797 MBytes. [ 40.872354] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0 [ 40.882695] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 42.141487] [fglrx] total GART = 130023424 [ 42.141495] [fglrx] free GART = 114032640 [ 42.141498] [fglrx] max single GART = 114032640 [ 42.141501] [fglrx] total LFB = 134217728 [ 42.141503] [fglrx] free LFB = 119828480 [ 42.141505] [fglrx] max single LFB = 119828480 [ 42.141507] [fglrx] total Inv = 0 [ 42.141509] [fglrx] free Inv = 0 [ 42.141511] [fglrx] max single Inv = 0 [ 42.141512] [fglrx] total TIM = 0 [ 76.694008] NET: Registered protocol family 17 [ 76.927837] ieee80211_crypt: registered algorithm 'WEP' [ 76.984961] SoftMAC: Open Authentication completed with 00:16:01:84:23:1d [ 78.515054] NET: Registered protocol family 10 [ 78.515214] lo: Disabled Privacy Extensions [ 78.515320] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 89.448552] eth1: no IPv6 routers present