.yes, caps lock continues to work

I don't what means "to boot to runlevel 2", but I tried to boot in safe mod with the same result. I did it again to get the /var/log/messages :

Mar  5 21:57:46 localhost syslogd 1.4.1#17ubuntu3: restart.
Mar  5 21:57:47 localhost kernel: Inspecting /boot/System.map-2.6.12-10-386
Mar  5 21:57:47 localhost kernel: Loaded 29010 symbols from /boot/System.map-2.6.12-10-386.
Mar  5 21:57:47 localhost kernel: Symbols match kernel version 2.6.12.
Mar  5 21:57:47 localhost kernel: No module symbols loaded - kernel modules not enabled. 
Mar  5 21:57:47 localhost kernel:    35.935101] Checking for popad bug... OK.
Mar  5 21:57:47 localhost kernel: [   35.935237] checking if image is initramfs... it is
Mar  5 21:57:47 localhost kernel: [   36.324833] Freeing initrd memory: 5171k freed
Mar  5 21:57:47 localhost kernel: [   36.325424] ACPI: Looking for DSDT in initrd... not found!
Mar  5 21:57:47 localhost kernel: [   36.368222]  not found!
Mar  5 21:57:47 localhost kernel: [   36.374919] ENABLING IO-APIC IRQs
Mar  5 21:57:47 localhost kernel: [   36.375235] ..TIMER: vector=0x31 pin1=2 pin2=-1
Mar  5 21:57:47 localhost kernel: [   36.486825] NET: Registered protocol family 16
Mar  5 21:57:47 localhost kernel: [   36.486843] EISA bus registered
Mar  5 21:57:47 localhost kernel: [   36.486846] ACPI: bus type pci registered
Mar  5 21:57:47 localhost kernel: [   36.487187] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
Mar  5 21:57:47 localhost kernel: [   36.487193] PCI: Using configuration type 1
Mar  5 21:57:47 localhost kernel: [   36.487196] mtrr: v2.0 (20020519)
Mar  5 21:57:47 localhost kernel: [   36.487432] ACPI: Subsystem revision 20050729
Mar  5 21:57:47 localhost kernel: [   36.493265] ACPI: Interpreter enabled
Mar  5 21:57:47 localhost kernel: [   36.493268] ACPI: Using IOAPIC for interrupt routing
Mar  5 21:57:47 localhost kernel: [   36.494128] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar  5 21:57:47 localhost kernel: [   36.494131] PCI: Probing PCI hardware (bus 00)
Mar  5 21:57:47 localhost kernel: [   36.494145] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Mar  5 21:57:47 localhost kernel: [   36.512262] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
Mar  5 21:57:47 localhost kernel: [   36.512455] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
Mar  5 21:57:47 localhost kernel: [   36.512664] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
Mar  5 21:57:47 localhost kernel: [   36.512856] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
Mar  5 21:57:47 localhost kernel: [   36.513048] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
Mar  5 21:57:47 localhost kernel: [   36.513240] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
Mar  5 21:57:47 localhost kernel: [   36.513434] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
Mar  5 21:57:47 localhost kernel: [   36.513642] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
Mar  5 21:57:47 localhost kernel: [   36.513727] Linux Plug and Play Support v0.97 (c) Adam Belay
Mar  5 21:57:47 localhost kernel: [   36.513736] pnp: PnP ACPI init
Mar  5 21:57:47 localhost kernel: [   36.517251] pnp: PnP ACPI: found 12 devices
Mar  5 21:57:47 localhost kernel: [   36.517254] PnPBIOS: Disabled by ACPI PNP
Mar  5 21:57:47 localhost kernel: [   36.517293] PCI: Using ACPI for IRQ routing
Mar  5 21:57:47 localhost kernel: [   36.517296] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Mar  5 21:57:47 localhost kernel: [   36.522725] pnp: 00:06: ioport range 0x680-0x6ff has been reserved
Mar  5 21:57:47 localhost kernel: [   36.522728] pnp: 00:06: ioport range 0x290-0x297 has been reserved
Mar  5 21:57:47 localhost kernel: [   36.523078] audit: initializing netlink socket (disabled)
Mar  5 21:57:47 localhost kernel: [   36.523084] audit: initialized
Mar  5 21:57:47 localhost kernel: [   36.523120] highmem bounce pool size: 64 pages
Mar  5 21:57:47 localhost kernel: [   36.523181] VFS: Disk quotas dquot_6.5.1
Mar  5 21:57:47 localhost kernel: [   36.523198] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar  5 21:57:47 localhost kernel: [   36.523230] devfs: 2004-01-31 Richard Gooch (<email address hidden>)
Mar  5 21:57:47 localhost kernel: [   36.523237] devfs: boot_options: 0x0
Mar  5 21:57:47 localhost kernel: [   36.523259] Initializing Cryptographic API
Mar  5 21:57:47 localhost kernel: [   36.523360] isapnp: Scanning for PnP cards...
Mar  5 21:57:47 localhost kernel: [   36.872968] isapnp: No Plug & Play device found
Mar  5 21:57:47 localhost kernel: [   36.884906] PNP: PS/2 controller doesn't have AUX irq; using default 0xc
Mar  5 21:57:47 localhost kernel: [   36.884910] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
Mar  5 21:57:47 localhost kernel: [   36.885089] serio: i8042 AUX port at 0x60,0x64 irq 12
Mar  5 21:57:47 localhost kernel: [   36.885102] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar  5 21:57:47 localhost kernel: [   36.885106] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
Mar  5 21:57:47 localhost kernel: [   36.885207] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  5 21:57:47 localhost kernel: [   36.885330] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar  5 21:57:47 localhost kernel: [   36.886677] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar  5 21:57:47 localhost kernel: [   36.886787] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  5 21:57:47 localhost kernel: [   36.886846] io scheduler noop registered
Mar  5 21:57:47 localhost kernel: [   36.886858] io scheduler anticipatory registered
Mar  5 21:57:47 localhost kernel: [   36.886866] io scheduler deadline registered
Mar  5 21:57:47 localhost kernel: [   36.886881] io scheduler cfq registered
Mar  5 21:57:47 localhost kernel: [   36.887111] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Mar  5 21:57:47 localhost kernel: [   36.887222] EISA: Probing bus 0 at eisa.0
Mar  5 21:57:47 localhost kernel: [   36.887256] EISA: Detected 0 cards.
Mar  5 21:57:47 localhost kernel: [   36.887286] NET: Registered protocol family 2
Mar  5 21:57:47 localhost kernel: [   36.895344] IP: routing cache hash table of 16384 buckets, 128Kbytes
Mar  5 21:57:47 localhost kernel: [   36.895537] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
Mar  5 21:57:47 localhost kernel: [   36.898145] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Mar  5 21:57:47 localhost kernel: [   36.898363] TCP: Hash tables configured (established 524288 bind 65536)
Mar  5 21:57:47 localhost kernel: [   36.898426] NET: Registered protocol family 8
Mar  5 21:57:47 localhost kernel: [   36.898428] NET: Registered protocol family 20
Mar  5 21:57:47 localhost kernel: [   36.898509] ACPI wakeup devices: 
Mar  5 21:57:47 localhost kernel: [   36.898511] PCI0 PS2K UAR2 UAR1 AC97 USB1 USB2 USB3 USB4 EHCI PWRB SLPB 
Mar  5 21:57:47 localhost kernel: [   36.898522] ACPI: (supports S0 S1 S3 S4 S5)
Mar  5 21:57:47 localhost kernel: [   36.898722] Freeing unused kernel memory: 224k freed
Mar  5 21:57:47 localhost kernel: [   36.911206] vga16fb: mapped to 0xc00a0000
Mar  5 21:57:47 localhost kernel: [   36.975772] Console: switching to colour frame buffer device 80x30
Mar  5 21:57:47 localhost kernel: [   36.975776] fb0: VGA16 VGA frame buffer device
Mar  5 21:57:47 localhost kernel: [   37.002770] input: AT Translated Set 2 keyboard on isa0060/serio0
Mar  5 21:57:47 localhost kernel: [   38.081396] Capability LSM initialized
Mar  5 21:57:47 localhost kernel: [   38.090461] NET: Registered protocol family 1
Mar  5 21:57:47 localhost kernel: [   38.104013] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar  5 21:57:47 localhost kernel: [   38.104022] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar  5 21:57:47 localhost kernel: [   38.104025] ACPI: bus type ide registered
Mar  5 21:57:47 localhost kernel: [   38.111241] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
Mar  5 21:57:47 localhost kernel: [   38.111259] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
Mar  5 21:57:47 localhost kernel: [   38.111286] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 4
Mar  5 21:57:47 localhost kernel: [   38.111310] VP_IDE: chipset revision 6
Mar  5 21:57:47 localhost kernel: [   38.111312] VP_IDE: not 100%% native mode: will probe irqs later
Mar  5 21:57:47 localhost kernel: [   38.111322] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
Mar  5 21:57:47 localhost kernel: [   38.111331]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Mar  5 21:57:47 localhost kernel: [   38.111341]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Mar  5 21:57:47 localhost kernel: [   38.494055] hda: HDS722516VLAT20, ATA DISK drive
Mar  5 21:57:47 localhost kernel: [   39.106049] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar  5 21:57:47 localhost kernel: [   39.896879] hdc: SONY CD-RW CRX225E, ATAPI CD/DVD-ROM drive
Mar  5 21:57:47 localhost kernel: [   40.610281] hdd: SAMSUNG DVD-ROM SD-616Q, ATAPI CD/DVD-ROM drive
Mar  5 21:57:47 localhost kernel: [   40.662797] ide1 at 0x170-0x177,0x376 on irq 15
Mar  5 21:57:47 localhost kernel: [   42.712153] hda: max request size: 1024KiB
Mar  5 21:57:47 localhost kernel: [   42.718740] hda: 321672960 sectors (164696 MB) w/1794KiB Cache, CHS=20023/255/63, UDMA(100)
Mar  5 21:57:47 localhost kernel: [   42.719050] hda: cache flushes supported
Mar  5 21:57:47 localhost kernel: [   42.719092]  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 > p3 p4
Mar  5 21:57:47 localhost kernel: [   42.747574] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
Mar  5 21:57:47 localhost kernel: [   42.747580] Uniform CD-ROM driver Revision: 3.20
Mar  5 21:57:47 localhost kernel: [   42.787104] hdd: ATAPI 48X DVD-ROM drive, 512kB Cache
Mar  5 21:57:47 localhost kernel: [   43.091737] Attempting manual resume
Mar  5 21:57:47 localhost kernel: [   43.095014] swsusp: Suspend partition has wrong signature?
Mar  5 21:57:47 localhost kernel: [   43.149844] SCSI subsystem initialized
Mar  5 21:57:47 localhost kernel: [   43.151134] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18
Mar  5 21:57:47 localhost kernel: [   43.151145] sata_promise PATA port found
Mar  5 21:57:47 localhost kernel: [   43.162084] ata1: SATA max UDMA/133 cmd 0xF887C200 ctl 0xF887C238 bmdma 0x0 irq 18
Mar  5 21:57:47 localhost kernel: [   43.162103] ata2: SATA max UDMA/133 cmd 0xF887C280 ctl 0xF887C2B8 bmdma 0x0 irq 18
Mar  5 21:57:47 localhost kernel: [   43.162117] ata3: PATA max UDMA/133 cmd 0xF887C300 ctl 0xF887C338 bmdma 0x0 irq 18
Mar  5 21:57:47 localhost kernel: [   43.362890] ata1: no device found (phy stat 00000000)
Mar  5 21:57:47 localhost kernel: [   43.362892] scsi0 : sata_promise
Mar  5 21:57:47 localhost kernel: [   43.563721] ata2: no device found (phy stat 00000000)
Mar  5 21:57:47 localhost kernel: [   43.563723] scsi1 : sata_promise
Mar  5 21:57:47 localhost kernel: [   43.724509] ATA: abnormal status 0x8 on port 0xF887C31C
Mar  5 21:57:47 localhost kernel: [   43.724514] scsi2 : sata_promise
Mar  5 21:57:47 localhost kernel: [   43.732639] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
Mar  5 21:57:47 localhost kernel: [   43.732677] skge addr 0xfac00000 irq 17 chip Yukon-Lite rev 9
Mar  5 21:57:47 localhost kernel: [   43.732744] skge eth0: addr 00:11:d8:a9:be:be
Mar  5 21:57:47 localhost kernel: [   43.751653] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
Mar  5 21:57:47 localhost kernel: [   43.751659] PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 4
Mar  5 21:57:47 localhost kernel: [   43.751684] sata_via(0000:00:0f.0): routed to hard irq line 4
Mar  5 21:57:47 localhost kernel: [   43.751709] ata4: SATA max UDMA/133 cmd 0xD000 ctl 0xC802 bmdma 0xB800 irq 20
Mar  5 21:57:47 localhost kernel: [   43.751724] ata5: SATA max UDMA/133 cmd 0xC400 ctl 0xC002 bmdma 0xB808 irq 20
Mar  5 21:57:47 localhost kernel: [   44.106439] ata4: dev 0 ATA, max UDMA/133, 240121728 sectors:
Mar  5 21:57:47 localhost kernel: [   44.106597] ata4: dev 0 configured for UDMA/133
Mar  5 21:57:47 localhost kernel: [   44.106599] scsi3 : sata_via
Mar  5 21:57:47 localhost kernel: [   44.307098] ata5: no device found (phy stat 00000000)
Mar  5 21:57:47 localhost kernel: [   44.307100] scsi4 : sata_via
Mar  5 21:57:47 localhost kernel: [   44.307162]   Vendor: ATA       Model: Maxtor 6Y120M0    Rev: YAR5
Mar  5 21:57:47 localhost kernel: [   44.307168]   Type:   Direct-Access                      ANSI SCSI revision: 05
Mar  5 21:57:47 localhost kernel: [   44.321379] usbcore: registered new driver usbfs
Mar  5 21:57:47 localhost kernel: [   44.321398] usbcore: registered new driver hub
Mar  5 21:57:47 localhost kernel: [   44.321946] USB Universal Host Controller Interface driver v2.2
Mar  5 21:57:47 localhost kernel: [   44.321990] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
Mar  5 21:57:47 localhost kernel: [   44.322001] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
Mar  5 21:57:47 localhost kernel: [   44.322025] uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Mar  5 21:57:47 localhost kernel: [   44.383131] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Mar  5 21:57:47 localhost kernel: [   44.383143] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
Mar  5 21:57:47 localhost kernel: [   44.383239] hub 1-0:1.0: USB hub found
Mar  5 21:57:47 localhost kernel: [   44.383246] hub 1-0:1.0: 2 ports detected
Mar  5 21:57:47 localhost kernel: [   44.386046] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
Mar  5 21:57:47 localhost kernel: [   44.386051] PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 5
Mar  5 21:57:47 localhost kernel: [   44.386071] uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
Mar  5 21:57:47 localhost kernel: [   44.563900] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Mar  5 21:57:47 localhost kernel: [   44.563904] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
Mar  5 21:57:47 localhost kernel: [   44.563976] hub 2-0:1.0: USB hub found
Mar  5 21:57:47 localhost kernel: [   44.563981] hub 2-0:1.0: 2 ports detected
Mar  5 21:57:47 localhost kernel: [   44.566893] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
Mar  5 21:57:47 localhost kernel: [   44.566898] PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5
Mar  5 21:57:47 localhost kernel: [   44.566918] uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
Mar  5 21:57:47 localhost kernel: [   44.628844] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Mar  5 21:57:47 localhost kernel: [   44.628849] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
Mar  5 21:57:47 localhost kernel: [   44.628920] hub 3-0:1.0: USB hub found
Mar  5 21:57:47 localhost kernel: [   44.628925] hub 3-0:1.0: 2 ports detected
Mar  5 21:57:47 localhost kernel: [   44.631836] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
Mar  5 21:57:47 localhost kernel: [   44.631840] PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 5
Mar  5 21:57:47 localhost kernel: [   44.631861] uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
Mar  5 21:57:47 localhost kernel: [   44.693790] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Mar  5 21:57:47 localhost kernel: [   44.693794] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400
Mar  5 21:57:47 localhost kernel: [   44.693870] hub 4-0:1.0: USB hub found
Mar  5 21:57:47 localhost kernel: [   44.693875] hub 4-0:1.0: 2 ports detected
Mar  5 21:57:47 localhost kernel: [   44.721426] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
Mar  5 21:57:47 localhost kernel: [   44.721439] ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
Mar  5 21:57:47 localhost kernel: [   44.742764] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
Mar  5 21:57:47 localhost kernel: [   44.742771] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfaf00000
Mar  5 21:57:47 localhost kernel: [   44.742794] ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Mar  5 21:57:47 localhost kernel: [   44.742851] hub 5-0:1.0: USB hub found
Mar  5 21:57:47 localhost kernel: [   44.742858] hub 5-0:1.0: 8 ports detected
Mar  5 21:57:47 localhost kernel: [   45.859804] usb 2-1: new full speed USB device using uhci_hcd and address 2
Mar  5 21:57:47 localhost kernel: [   45.947795] hub 2-1:1.0: USB hub found
Mar  5 21:57:47 localhost kernel: [   45.949767] hub 2-1:1.0: 4 ports detected
Mar  5 21:57:47 localhost kernel: [   46.166548] usb 2-2: new full speed USB device using uhci_hcd and address 3
Mar  5 21:57:47 localhost kernel: [   46.390395] usb 2-1.3: new low speed USB device using uhci_hcd and address 4
Mar  5 21:57:47 localhost kernel: [   46.823807] usbcore: registered new driver hiddev
Mar  5 21:57:47 localhost kernel: [   46.828047] input: USB HID v1.00 Device [Generic USB Audio Device   ] on usb-0000:00:10.1-2
Mar  5 21:57:47 localhost kernel: [   46.844026] input: USB HID v1.00 Mouse [ACROX Combo Mouse] on usb-0000:00:10.1-1.3
Mar  5 21:57:47 localhost kernel: [   46.844031] usbcore: registered new driver usbhid
Mar  5 21:57:47 localhost kernel: [   46.844034] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Mar  5 21:57:47 localhost kernel: [   46.898330] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
Mar  5 21:57:47 localhost kernel: [   46.898340] SCSI device sda: drive cache: write back
Mar  5 21:57:47 localhost kernel: [   46.898388] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
Mar  5 21:57:47 localhost kernel: [   46.898395] SCSI device sda: drive cache: write back
Mar  5 21:57:47 localhost kernel: [   46.898397]  /dev/scsi/host3/bus0/target0/lun0: p1
Mar  5 21:57:47 localhost kernel: [   46.919265] Attached scsi disk sda at scsi3, channel 0, id 0, lun 0
Mar  5 21:57:47 localhost kernel: [   47.348173] ACPI: CPU0 (power states: C1[C1])
Mar  5 21:57:47 localhost kernel: [   47.537499] Attempting manual resume
Mar  5 21:57:47 localhost kernel: [   47.543368] swsusp: Suspend partition has wrong signature?
Mar  5 21:57:47 localhost kernel: [   47.548642] EXT3-fs: INFO: recovery required on readonly filesystem.
Mar  5 21:57:47 localhost kernel: [   47.548646] EXT3-fs: write access will be enabled during recovery.
Mar  5 21:57:47 localhost kernel: [   47.772671] kjournald starting.  Commit interval 5 seconds
Mar  5 21:57:47 localhost kernel: [   47.772681] EXT3-fs: recovery complete.
Mar  5 21:57:47 localhost kernel: [   47.773773] EXT3-fs: mounted filesystem with ordered data mode.
Mar  5 21:57:47 localhost kernel: [   48.704658] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Mar  5 21:57:47 localhost kernel: [   51.559272] Adding 658592k swap on /dev/hda6.  Priority:-1 extents:1
Mar  5 21:57:47 localhost kernel: [   51.744764] EXT3 FS on hda3, internal journal
Mar  5 21:57:47 localhost kernel: [   55.801636] lp: driver loaded but no devices found
Mar  5 21:57:47 localhost kernel: [   55.824169] mice: PS/2 mouse device common for all mice
Mar  5 21:57:47 localhost kernel: [   55.860097] sbp2: $Rev: 1219 $ Ben Collins <email address hidden>
Mar  5 21:57:47 localhost kernel: [   58.929326] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: <email address hidden>
Mar  5 21:57:47 localhost kernel: [   59.665914] cdrom: open failed.
Mar  5 21:57:47 localhost kernel: [   61.553099] Linux agpgart interface v0.101 (c) Dave Jones
Mar  5 21:57:47 localhost kernel: [   61.560079] agpgart: Detected AGP bridge 0
Mar  5 21:57:47 localhost kernel: [   61.575545] agpgart: AGP aperture is 64M @ 0xf4000000
Mar  5 21:57:47 localhost kernel: [   61.803406] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar  5 21:57:47 localhost kernel: [   61.812968] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Mar  5 21:57:47 localhost kernel: [   61.892785] ohci1394: $Rev: 1250 $ Ben Collins <email address hidden>
Mar  5 21:57:47 localhost kernel: [   61.892803] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
Mar  5 21:57:47 localhost kernel: [   61.892814] PCI: Via IRQ fixup for 0000:00:07.0, from 11 to 0
Mar  5 21:57:47 localhost kernel: [   61.949111] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[fa800000-fa8007ff]  Max Packet=[2048]
Mar  5 21:57:47 localhost kernel: [   62.124415] Linux Kernel Card Services
Mar  5 21:57:47 localhost kernel: [   62.124418]   options:  [pci] [cardbus] [pm]
Mar  5 21:57:47 localhost kernel: [   62.135203] PCI: Enabling device 0000:00:0c.0 (0140 -> 0142)
Mar  5 21:57:47 localhost kernel: [   62.135211] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17
Mar  5 21:57:47 localhost kernel: [   62.135227] Yenta: CardBus bridge found at 0000:00:0c.0 [0000:0000]
Mar  5 21:57:47 localhost kernel: [   62.255747] Yenta: ISA IRQ mask 0x0000, PCI irq 17
Mar  5 21:57:47 localhost kernel: [   62.255750] Socket status: 30000820
Mar  5 21:57:47 localhost kernel: [   62.338074] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 18
Mar  5 21:57:47 localhost kernel: [   62.338081] rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
Mar  5 21:57:47 localhost kernel: [   62.907123] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
Mar  5 21:57:47 localhost kernel: [   62.907134] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 6
Mar  5 21:57:47 localhost kernel: [   63.815897] PCI: Enabling device 0000:02:00.0 (0080 -> 0082)
Mar  5 21:57:47 localhost kernel: [   63.815907] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Mar  5 21:57:47 localhost kernel: [   65.570951] usbcore: registered new driver snd-usb-audio
Mar  5 21:57:47 localhost kernel: [   65.816096] Hammerfall-DSP: Firmware already present, initializing card.
Mar  5 21:57:47 localhost kernel: [   66.194320] Real Time Clock Driver v1.12
Mar  5 21:57:47 localhost kernel: [   66.314694] input: PC Speaker
Mar  5 21:57:47 localhost kernel: [   66.404710] Floppy drive(s): fd0 is 1.44M
Mar  5 21:57:47 localhost kernel: [   66.420446] FDC 0 is a post-1991 82077
Mar  5 21:57:47 localhost kernel: [   66.738494] ts: Compaq touchscreen protocol output
Mar  5 21:57:47 localhost kernel: [   67.214146] NET: Registered protocol family 17
Mar  5 21:57:47 localhost kernel: [   73.699328] skge eth0: enabling interface
Mar  5 21:57:47 localhost kernel: [  139.479412] NET: Registered protocol family 10
Mar  5 21:57:47 localhost kernel: [  139.479509] Disabled Privacy Extensions on device c02eb280(lo)
Mar  5 21:57:47 localhost kernel: [  139.479659] IPv6 over IPv4 tunneling driver
Mar  5 21:57:47 localhost kernel: [  140.465566] ACPI: Power Button (FF) [PWRF]
Mar  5 21:57:47 localhost kernel: [  140.465588] ACPI: Power Button (CM) [PWRB]
Mar  5 21:57:47 localhost kernel: [  140.465596] ACPI: Sleep Button (CM) [SLPB]
Mar  5 21:57:57 localhost kernel: [  151.478398] hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
Mar  5 21:57:57 localhost kernel: [  151.478404] hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
Mar  5 21:57:57 localhost kernel: [  151.478408] ide: failed opcode was: unknown
Mar  5 21:57:57 localhost kernel: [  151.478411] end_request: I/O error, dev hdd, sector 0
Mar  5 21:58:00 localhost hp: unable to open /var/run/hplip/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75 
Mar  5 21:58:01 localhost hpiod: 0.9.5 accepting connections at 32770... 
Mar  5 21:58:01 localhost kernel: [  155.723509] [drm] Initialized drm 1.0.0 20040925
Mar  5 21:58:01 localhost kernel: [  155.727941] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Mar  5 21:58:01 localhost kernel: [  155.731507] [drm] Initialized mga 3.1.0 20021029 on minor 0: Matrox Graphics, Inc. MGA G400 AGP
Mar  5 21:58:01 localhost kernel: [  155.732151] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Mar  5 21:58:01 localhost kernel: [  155.732162] agpgart: Device is in legacy mode, falling back to 2.x
Mar  5 21:58:01 localhost kernel: [  155.732168] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
Mar  5 21:58:01 localhost kernel: [  155.732257] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
Mar  5 21:58:03 localhost kernel: [  157.101350] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Mar  5 21:58:03 localhost kernel: [  157.101355] apm: overridden by ACPI.
Mar  5 21:58:03 localhost kernel: [  157.570166] cs: IO port probe 0x100-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
Mar  5 21:58:03 localhost kernel: [  157.572732] cs: IO port probe 0xc00-0xcf7: clean.
Mar  5 21:58:03 localhost kernel: [  157.573454] cs: IO port probe 0xa00-0xaff: clean.
Mar  5 21:58:04 localhost kernel: [  157.914885] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4)
Mar  5 21:58:04 localhost kernel: [  157.915093] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
Mar  5 21:58:04 localhost kernel: [  157.915097] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
Mar  5 21:58:04 localhost kernel: [  157.915101] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
Mar  5 21:58:04 localhost kernel: [  158.216094] Bluetooth: Core ver 2.7
Mar  5 21:58:04 localhost kernel: [  158.216101] NET: Registered protocol family 31
Mar  5 21:58:04 localhost kernel: [  158.216104] Bluetooth: HCI device and connection manager initialized
Mar  5 21:58:04 localhost kernel: [  158.216116] Bluetooth: HCI socket layer initialized
Mar  5 21:58:04 localhost kernel: [  158.299670] Bluetooth: L2CAP ver 2.7
Mar  5 21:58:04 localhost kernel: [  158.299674] Bluetooth: L2CAP socket layer initialized
Mar  5 21:58:04 localhost kernel: [  158.337605] Bluetooth: RFCOMM ver 1.5
Mar  5 21:58:04 localhost kernel: [  158.337613] Bluetooth: RFCOMM socket layer initialized
Mar  5 21:58:04 localhost kernel: [  158.337620] Bluetooth: RFCOMM TTY layer initialized
Mar  5 21:58:05 localhost gconfd (dominique-10060): starting (version 2.12.0), pid 10060 user 'dominique'
Mar  5 21:58:05 localhost gconfd (dominique-10060): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Mar  5 21:58:05 localhost gconfd (dominique-10060): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Mar  5 21:58:05 localhost gconfd (dominique-10060): Resolved address "xml:readwrite:/home/dominique/.gconf" to a writable configuration source at position 2
Mar  5 21:58:05 localhost gconfd (dominique-10060): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Mar  5 21:58:05 localhost gconfd (dominique-10060): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Mar  5 21:58:05 localhost gconfd (dominique-10060): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Mar  5 21:58:05 localhost gconfd (dominique-10060): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Mar  5 21:58:05 localhost gconfd (dominique-10060): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Mar  5 21:58:08 localhost kernel: [  323.602325] hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
Mar  5 21:58:08 localhost kernel: [  323.602338] hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
Mar  5 21:58:08 localhost kernel: [  323.602346] ide: failed opcode was: unknown
Mar  5 21:58:08 localhost kernel: [  323.602353] end_request: I/O error, dev hdd, sector 8
Mar  5 21:58:14 localhost gconfd (dominique-10060): Resolved address "xml:readwrite:/home/dominique/.gconf" to a writable configuration source at position 0
Mar  5 21:58:20 localhost kernel: [  170.507203] hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
Mar  5 21:58:20 localhost kernel: [  170.507210] hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
Mar  5 21:58:20 localhost kernel: [  170.507214] ide: failed opcode was: unknown
Mar  5 21:58:20 localhost kernel: [  170.507218] end_request: I/O error, dev hdd, sector 16
Mar  5 21:58:31 localhost kernel: [  356.599819] hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
Mar  5 21:58:31 localhost kernel: [  356.599832] hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
Mar  5 21:58:31 localhost kernel: [  356.599841] ide: failed opcode was: unknown
Mar  5 21:58:31 localhost kernel: [  356.599849] end_request: I/O error, dev hdd, sector 24
Mar  5 21:58:42 localhost kernel: [  367.535241] hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
Mar  5 21:58:42 localhost kernel: [  367.535254] hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
Mar  5 21:58:42 localhost kernel: [  367.535262] ide: failed opcode was: unknown
Mar  5 21:58:42 localhost kernel: [  367.535270] end_request: I/O error, dev hdd, sector 32
Mar  5 21:58:53 localhost kernel: [  378.870453] hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
Mar  5 21:58:53 localhost kernel: [  378.870466] hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
Mar  5 21:58:53 localhost kernel: [  378.870474] ide: failed opcode was: unknown
Mar  5 21:58:53 localhost kernel: [  378.870482] end_request: I/O error, dev hdd, sector 40
Mar  5 21:59:04 localhost kernel: [  389.865786] hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
Mar  5 21:59:04 localhost kernel: [  389.865800] hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
Mar  5 21:59:04 localhost kernel: [  389.865808] ide: failed opcode was: unknown
Mar  5 21:59:04 localhost kernel: [  389.865815] end_request: I/O error, dev hdd, sector 48
Mar  5 21:59:16 localhost kernel: [  401.200955] hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
Mar  5 21:59:16 localhost kernel: [  401.200968] hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
Mar  5 21:59:16 localhost kernel: [  401.200976] ide: failed opcode was: unknown
Mar  5 21:59:16 localhost kernel: [  401.200984] end_request: I/O error, dev hdd, sector 56
Mar  5 21:59:26 localhost kernel: [  412.016313] hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
Mar  5 21:59:26 localhost kernel: [  412.016326] hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
Mar  5 21:59:26 localhost kernel: [  412.016334] ide: failed opcode was: unknown
Mar  5 21:59:26 localhost kernel: [  412.016341] end_request: I/O error, dev hdd, sector 0