++++ WORKING CASE (MACHINE NAMED BLACK): +++ /var/log/dmesg: Linux version 2.6.10-5-k7 (buildd@terranova) (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 Fri Sep 23 14:26:27 UTC 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) 127MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f7390 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7700 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: root=/dev/hda2 ro quiet splash mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2088.202 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1031516k/1048512k available (1595k kernel code, 16340k reserved, 721k data, 164k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 4136.96 BogoMIPS (lpj=2068480) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 2800+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: Looking for DSDT in initrd... not found! ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=0 pin2=-1 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 4540k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfbbd0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. pnp: 00:00: ioport range 0x4000-0x407f could not be reserved pnp: 00:00: ioport range 0x4080-0x40ff has been reserved pnp: 00:00: ioport range 0x4400-0x447f has been reserved pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved pnp: 00:00: ioport range 0x4200-0x427f has been reserved pnp: 00:00: ioport range 0x4280-0x42ff has been reserved pnp: 00:01: ioport range 0x5000-0x503f has been reserved pnp: 00:01: ioport range 0x5040-0x507f has been reserved audit: initializing netlink socket (disabled) audit(1128203250.170:0): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 Restarting tasks...<6> Strange, kswapd0 not stopped Strange, kseriod not stopped done ACPI wakeup devices: HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 ACPI: (supports S0 S1 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4540KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 164k freed ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (47 C) NET: Registered protocol family 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: ST3300831A, ATA DISK drive elevator: using anticipatory as default io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 1024KiB hda: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(100) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 > Probing IDE interface ide1... hdc: PLEXTOR DVDR PX-708A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... Stopping tasks: ==| Freeing memory... -\|/done (453 pages freed) Restarting tasks... done EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1 EXT3 FS on hda2, internal journal hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). mice: PS/2 mouse device common for all mice input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 ts: Compaq touchscreen protocol output Capability LSM initialized device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 cdrom: open failed. Real Time Clock Driver v1.12 input: PC Speaker inserting floppy driver for 2.6.10-5-k7 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected NVIDIA nForce2 chipset agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 64M @ 0xe0000000 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040 usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 22, pci mem 0xee004000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 21 ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2) PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: irq 21, pci mem 0xee005000 ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 20 ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: irq 20, pci mem 0xee000000 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:04.0 to 64 eth0: forcedeth.c: subsystem: 01462:570c bound to 0000:00:04.0 eth0: no link during initialization. ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0_measure_ac97_clock: measured 49936 usecs intel8x0: clocking to 47464 cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Evaluate _OSC Set fails. Status = 0x0005 pciehp: add_host_bridge: status 5 pciehp: Fails to gain control of native hot-plug Evaluate _OSC Set fails. Status = 0x0005 pciehp: add_host_bridge: status 5 pciehp: Fails to gain control of native hot-plug NET: Registered protocol family 17 eth0: link up. NET: Registered protocol family 10 Disabled Privacy Extensions on device c0315d40(lo) IPv6 over IPv4 tunneling driver +++ sudo dmidecode: # dmidecode 2.5 SMBIOS 2.3 present. 37 structures occupying 1052 bytes. Table at 0x000F0000. Handle 0x0000 DMI type 0, 20 bytes. BIOS Information Vendor: Phoenix Technologies, LTD Version: 6.00 PG Release Date: 11/07/2003 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 256 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported Function key-initiated network boot is supported Handle 0x0001 DMI type 1, 25 bytes. System Information Manufacturer: Product Name: Version: Serial Number: UUID: Not Present Wake-up Type: Power Switch Handle 0x0002 DMI type 2, 8 bytes. Base Board Information Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD Product Name: MS-6570 Version: Serial Number: Handle 0x0003 DMI type 3, 17 bytes. Chassis Information Manufacturer: Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004 DMI type 4, 35 bytes. Processor Information Socket Designation: Socket A Type: Central Processor Family: Duron Manufacturer: AMD ID: A0 06 00 00 FF FB 83 03 Signature: Family 6, Model A, Stepping 0 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) Version: AMD Athlon(tm) XP Voltage: 1.6 V External Clock: 166 MHz Max Speed: 2200 MHz Current Speed: 2083 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0009 L2 Cache Handle: 0x000A L3 Cache Handle: Not Provided Serial Number: Asset Tag: Part Number: Handle 0x0005 DMI type 5, 22 bytes. Memory Controller Information Error Detecting Method: 8-bit Parity Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 32 MB Maximum Total Memory Size: 96 MB Supported Speeds: 70 ns 60 ns Supported Memory Types: Standard EDO Memory Module Voltage: 5.0 V Associated Memory Slots: 3 0x0006 0x0007 0x0008 Enabled Error Correcting Capabilities: None Handle 0x0006 DMI type 6, 12 bytes. Memory Module Information Socket Designation: A0 Bank Connections: 0 Current Speed: 10 ns Type: Other Installed Size: 512 MB (Single-bank Connection) Enabled Size: 512 MB (Single-bank Connection) Error Status: OK Handle 0x0007 DMI type 6, 12 bytes. Memory Module Information Socket Designation: A1 Bank Connections: 2 Current Speed: 10 ns Type: Other Installed Size: 512 MB (Single-bank Connection) Enabled Size: 512 MB (Single-bank Connection) Error Status: OK Handle 0x0008 DMI type 6, 12 bytes. Memory Module Information Socket Designation: A2 Bank Connections: None Current Speed: 10 ns Type: Other Installed Size: Not Installed (Single-bank Connection) Enabled Size: Not Installed (Single-bank Connection) Error Status: OK Handle 0x0009 DMI type 7, 19 bytes. Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 KB Maximum Size: 128 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A DMI type 7, 19 bytes. Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: External Installed Size: 512 KB Maximum Size: 512 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000B DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000C DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000D DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: 8251 FIFO Compatible Handle 0x000E DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x000F DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM2 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x0010 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x0011 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0012 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0013 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB External Connector Type: Other Port Type: USB Handle 0x0014 DMI type 9, 13 bytes. System Slot Information Designation: PCI0 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 1 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0015 DMI type 9, 13 bytes. System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Available Length: Long ID: 2 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0016 DMI type 9, 13 bytes. System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 3 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0017 DMI type 9, 13 bytes. System Slot Information Designation: PCI3 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 4 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0018 DMI type 9, 13 bytes. System Slot Information Designation: PCI4 Type: 32-bit PCI Current Usage: Available Length: Long ID: 5 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0019 DMI type 9, 13 bytes. System Slot Information Designation: AGP Type: 32-bit AGP Current Usage: Available Length: Long ID: 240 Characteristics: 5.0 V is provided Handle 0x001A DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x001B DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 1536 MB Error Information Handle: Not Provided Number Of Devices: 3 Handle 0x001C DMI type 17, 27 bytes. Memory Device Array Handle: 0x001B Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: 512 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x001D DMI type 17, 27 bytes. Memory Device Array Handle: 0x001B Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: 512 MB Form Factor: DIMM Set: None Locator: A1 Bank Locator: Bank2/3 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x001E DMI type 17, 27 bytes. Memory Device Array Handle: 0x001B Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: A2 Bank Locator: Bank4/5 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x001F DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Array Handle: 0x001B Partition Width: 0 Handle 0x0020 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Device Handle: 0x001C Memory Array Mapped Address Handle: 0x001F Partition Row Position: 1 Handle 0x0021 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00020000000 Ending Address: 0x0003FFFFFFF Range Size: 512 MB Physical Device Handle: 0x001D Memory Array Mapped Address Handle: 0x001F Partition Row Position: 1 Handle 0x0022 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x001E Memory Array Mapped Address Handle: 0x001F Partition Row Position: 1 Handle 0x0023 DMI type 32, 11 bytes. System Boot Information Status: No errors detected Handle 0x0024 DMI type 127, 4 bytes. End Of Table ++++ BROKEN CASE (MACHINE NAMED WHITE): +++ /var/log/dmesg: [4294667.296000] Linux version 2.6.12-9-386 (buildd@vernadsky) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Fri Sep 30 23:44:45 UTC 2005 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [4294667.296000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) [4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [4294667.296000] 0MB HIGHMEM available. [4294667.296000] 511MB LOWMEM available. [4294667.296000] found SMP MP-table at 000f5eb0 [4294667.296000] On node 0 totalpages: 131056 [4294667.296000] DMA zone: 4096 pages, LIFO batch:1 [4294667.296000] Normal zone: 126960 pages, LIFO batch:31 [4294667.296000] HighMem zone: 0 pages, LIFO batch:1 [4294667.296000] DMI 2.2 present. [4294667.296000] ACPI: RSDP (v000 VIA694 ) @ 0x000f78b0 [4294667.296000] ACPI: RSDT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 [4294667.296000] ACPI: FADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 [4294667.296000] ACPI: MADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff5900 [4294667.296000] ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x4008 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [4294667.296000] Processor #0 6:4 APIC version 16 [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 20000000 (gap: 20000000:dfff0000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/mapper/Ubuntu-root ro quiet splash [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes) [4294667.296000] Detected 1200.077 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294669.537000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294669.540000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294669.568000] Memory: 510980k/524224k available (1415k kernel code, 12652k reserved, 763k data, 224k init, 0k highmem) [4294669.568000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294669.568000] Calibrating delay loop... 2375.68 BogoMIPS (lpj=1187840) [4294669.592000] Security Framework v1.0.0 initialized [4294669.592000] SELinux: Disabled at boot. [4294669.592000] Mount-cache hash table entries: 512 [4294669.592000] CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000 [4294669.592000] CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000 [4294669.592000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [4294669.592000] CPU: L2 Cache: 256K (64 bytes/line) [4294669.592000] CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020 00000000 00000000 00000000 [4294669.592000] CPU: AMD Athlon(tm) processor stepping 02 [4294669.592000] Enabling fast FPU save and restore... done. [4294669.592000] Checking 'hlt' instruction... OK. [4294669.596000] Checking for popad bug... OK. [4294669.596000] checking if image is initramfs... it is [4294670.262000] Freeing initrd memory: 5081k freed [4294670.269000] ACPI: Looking for DSDT in initrd... not found! [4294670.361000] not found! [4294670.368000] ENABLING IO-APIC IRQs [4294670.369000] ..TIMER: vector=0x31 pin1=2 pin2=-1 [4294670.480000] NET: Registered protocol family 16 [4294670.480000] EISA bus registered [4294670.480000] ACPI: bus type pci registered [4294670.496000] PCI: PCI BIOS revision 2.10 entry at 0xfb180, last bus=1 [4294670.496000] PCI: Using configuration type 1 [4294670.496000] mtrr: v2.0 (20020519) [4294670.497000] ACPI: Subsystem revision 20050729 [4294670.510000] ACPI: Interpreter enabled [4294670.510000] ACPI: Using IOAPIC for interrupt routing [4294670.511000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294670.511000] PCI: Probing PCI hardware (bus 00) [4294670.511000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 [4294670.511000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [4294670.514000] Boot video device is 0000:00:08.0 [4294670.538000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294670.539000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [4294670.540000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [4294670.540000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. [4294670.541000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [4294670.545000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294670.545000] pnp: PnP ACPI init [4294670.550000] pnp: PnP ACPI: found 12 devices [4294670.550000] PnPBIOS: Disabled by ACPI PNP [4294670.550000] PCI: Using ACPI for IRQ routing [4294670.550000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294670.572000] audit: initializing netlink socket (disabled) [4294670.572000] audit: initialized [4294670.572000] VFS: Disk quotas dquot_6.5.1 [4294670.572000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294670.572000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) [4294670.572000] devfs: boot_options: 0x0 [4294670.572000] Initializing Cryptographic API [4294670.572000] Applying VIA southbridge workaround. [4294670.572000] PCI: Enabling Via external APIC routing [4294670.573000] isapnp: Scanning for PnP cards... [4294670.927000] isapnp: No Plug & Play device found [4294670.953000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [4294670.954000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294670.954000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294670.954000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled [4294670.954000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294670.954000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [4294670.957000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294670.957000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [4294670.958000] io scheduler noop registered [4294670.958000] io scheduler anticipatory registered [4294670.958000] io scheduler deadline registered [4294670.958000] io scheduler cfq registered [4294670.958000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294670.958000] EISA: Probing bus 0 at eisa.0 [4294670.958000] Cannot allocate resource for EISA slot 4 [4294670.958000] Cannot allocate resource for EISA slot 5 [4294670.958000] Cannot allocate resource for EISA slot 6 [4294670.958000] EISA: Detected 0 cards. [4294670.958000] NET: Registered protocol family 2 [4294670.967000] IP: routing cache hash table of 4096 buckets, 32Kbytes [4294670.967000] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [4294670.968000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes) [4294670.968000] TCP: Hash tables configured (established 32768 bind 32768) [4294670.968000] NET: Registered protocol family 8 [4294670.968000] NET: Registered protocol family 20 [4294670.969000] ACPI wakeup devices: [4294670.969000] SLPB PCI0 USB0 USB1 MODM UAR1 UAR2 LPT1 [4294670.969000] ACPI: (supports S0 S1 S4 S5) [4294670.969000] Freeing unused kernel memory: 224k freed [4294670.990000] vga16fb: initializing [4294670.990000] vga16fb: mapped to 0xc00a0000 [4294671.061000] Console: switching to colour frame buffer device 80x30 [4294671.061000] fb0: VGA16 VGA frame buffer device [4294671.061000] input: AT Translated Set 2 keyboard on isa0060/serio0 [4294672.114000] Capability LSM initialized [4294672.132000] NET: Registered protocol family 1 [4294672.149000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294672.149000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294672.149000] ACPI: bus type ide registered [4294672.157000] VP_IDE: IDE controller at PCI slot 0000:00:07.1 [4294672.157000] PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0 [4294672.157000] VP_IDE: chipset revision 6 [4294672.157000] VP_IDE: not 100% native mode: will probe irqs later [4294672.157000] VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 [4294672.157000] ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio [4294672.157000] ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio [4294672.157000] Probing IDE interface ide0... [4294672.541000] hda: ST3300831A, ATA DISK drive [4294673.153000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294673.153000] Probing IDE interface ide1... [4294673.945000] hdc: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive [4294674.251000] ide1 at 0x170-0x177,0x376 on irq 15 [4294674.251000] Probing IDE interface ide2... [4294674.764000] Probing IDE interface ide3... [4294675.276000] Probing IDE interface ide4... [4294675.788000] Probing IDE interface ide5... [4294676.305000] hda: max request size: 1024KiB [4294676.305000] hda: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(100) [4294676.305000] hda: cache flushes supported [4294676.305000] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > [4294676.323000] hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache [4294676.323000] Uniform CD-ROM driver Revision: 3.20 [4294676.744000] usbcore: registered new driver usbfs [4294676.744000] usbcore: registered new driver hub [4294676.746000] USB Universal Host Controller Interface driver v2.2 [4294676.747000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [4294676.747000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [4294676.747000] PCI: Via IRQ fixup for 0000:00:07.2, from 5 to 11 [4294676.747000] uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [4294676.809000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [4294676.809000] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000d400 [4294676.809000] hub 1-0:1.0: USB hub found [4294676.809000] hub 1-0:1.0: 2 ports detected [4294676.812000] ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [4294676.812000] PCI: Via IRQ fixup for 0000:00:07.3, from 5 to 11 [4294676.812000] uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) [4294676.874000] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 [4294676.874000] uhci_hcd 0000:00:07.3: irq 11, io base 0x0000d800 [4294676.874000] hub 2-0:1.0: USB hub found [4294676.874000] hub 2-0:1.0: 2 ports detected [4294676.939000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [4294676.939000] 8139cp: pci dev 0000:00:0a.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [4294676.939000] 8139cp: Try the "8139too" driver instead. [4294676.942000] 8139too Fast Ethernet driver 0.9.27 [4294676.942000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 19 (level, low) -> IRQ 19 [4294676.942000] eth0: RealTek RTL8139 at 0xec00, 00:50:ba:44:1f:b6, IRQ 19 [4294676.942000] eth0: Identified 8139 chip type 'RTL-8139B' [4294679.356000] ACPI: CPU0 (power states: C1[C1]) [4294679.427000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [4294679.462000] cdrom: open failed. [4294679.545000] Attempting manual resume [4294679.570000] swsusp: Suspend partition has wrong signature? [4294679.608000] kjournald starting. Commit interval 5 seconds [4294679.608000] EXT3-fs: mounted filesystem with ordered data mode. [4294681.198000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294684.945000] Adding 1544184k swap on /dev/mapper/Ubuntu-swap_1. Priority:-1 extents:1 [4294685.139000] EXT3 FS on dm-0, internal journal [4294689.698000] parport_pc: VIA 686A/8231 detected [4294689.698000] parport_pc: probing current configuration [4294689.698000] parport_pc: Current parallel port base: 0x378 [4294689.698000] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] [4294689.780000] parport_pc: VIA parallel port: io=0x378, irq=7 [4294689.789000] lp0: using parport0 (interrupt-driven). [4294689.830000] mice: PS/2 mouse device common for all mice [4294690.086000] input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 [4294690.402000] ts: Compaq touchscreen protocol output [4294694.147000] cdrom: open failed. [4294694.773000] kjournald starting. Commit interval 5 seconds [4294694.773000] EXT3 FS on hda1, internal journal [4294694.773000] EXT3-fs: mounted filesystem with ordered data mode. [4294696.145000] Linux agpgart interface v0.101 (c) Dave Jones [4294696.161000] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset [4294696.193000] agpgart: AGP aperture is 64M @ 0xd0000000 [4294696.330000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294696.340000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 [4294696.340000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 [4294697.343000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [4294697.343000] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294697.343000] PCI: Via IRQ fixup for 0000:00:07.5, from 11 to 10 [4294697.343000] PCI: Setting latency timer of device 0000:00:07.5 to 64 [4294700.160000] Real Time Clock Driver v1.12 [4294700.345000] input: PC Speaker [4294700.509000] Floppy drive(s): fd0 is 1.44M [4294700.523000] FDC 0 is a post-1991 82077 [4294703.610000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [4294703.644000] NET: Registered protocol family 17 +++ sudo dmidecode: # dmidecode 2.6 SMBIOS 2.2 present. 38 structures occupying 1048 bytes. Table at 0x000F0800. Handle 0x0000 DMI type 0, 19 bytes. BIOS Information Vendor: Award Software International, Inc. Version: 6.00 PG Release Date: 09/26/2001 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 256 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported Handle 0x0001 DMI type 1, 25 bytes. System Information Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD Product Name: MS-6330 Version: Serial Number: UUID: Not Settable Wake-up Type: Power Switch Handle 0x0002 DMI type 2, 8 bytes. Base Board Information Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD Product Name: MS-6330 Version: Serial Number: Handle 0x0003 DMI type 3, 13 bytes. Chassis Information Manufacturer: Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown Handle 0x0004 DMI type 4, 32 bytes. Processor Information Socket Designation: Slot A Type: Central Processor Family: Duron Manufacturer: AMD ID: 42 06 00 00 FF FB 83 01 Signature: Family 6, Model 4, Stepping 2 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) Version: Voltage: 3.3 V External Clock: 100 MHz Max Speed: 1200 MHz Current Speed: 1200 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0009 L2 Cache Handle: 0x000A L3 Cache Handle: No L3 Cache Handle 0x0516 DMI type 0, 5 bytes. BIOS Information Handle 0x0603 DMI type 5, 2 bytes. Memory Controller Information Handle 0x0600 DMI type 32, 0 bytes. System Boot Information Handle 0x0006 DMI type 6, 12 bytes. Memory Module Information Socket Designation: BANK_0 Bank Connections: 0 1 Current Speed: 8 ns Type: DIMM SDRAM Installed Size: 256 MB (Single-bank Connection) Enabled Size: 256 MB (Single-bank Connection) Error Status: OK Handle 0x0007 DMI type 6, 12 bytes. Memory Module Information Socket Designation: BANK_1 Bank Connections: 2 3 Current Speed: 8 ns Type: DIMM SDRAM Installed Size: 256 MB (Single-bank Connection) Enabled Size: 256 MB (Single-bank Connection) Error Status: OK Handle 0x0008 DMI type 6, 12 bytes. Memory Module Information Socket Designation: BANK_2 Bank Connections: 4 5 Current Speed: 127 ns Type: Unknown Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x0009 DMI type 7, 19 bytes. Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 KB Maximum Size: 32 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A DMI type 7, 19 bytes. Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: External Installed Size: 256 KB Maximum Size: 2048 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000B DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: External Connector Type: None Port Type: Other Handle 0x000C DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: External Connector Type: None Port Type: Other Handle 0x000D DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: External Connector Type: None Port Type: 8251 FIFO Compatible Handle 0x000E DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x000F DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM2 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x0010 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x0011 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: Other External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0012 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: Detected External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0013 DMI type 9, 13 bytes. System Slot Information Designation: PCI Type: 32-bit PCI Current Usage: In Use Length: Long ID: 8 Characteristics: 5.0 V is provided Handle 0x0014 DMI type 9, 13 bytes. System Slot Information Designation: PCI Type: 32-bit PCI Current Usage: Available Length: Long ID: 9 Characteristics: 5.0 V is provided Handle 0x0015 DMI type 9, 13 bytes. System Slot Information Designation: PCI Type: 32-bit PCI Current Usage: In Use Length: Long ID: 10 Characteristics: 5.0 V is provided Handle 0x0016 DMI type 9, 13 bytes. System Slot Information Designation: PCI Type: 32-bit PCI Current Usage: Available Length: Long ID: 12 Characteristics: 5.0 V is provided Handle 0x0017 DMI type 9, 13 bytes. System Slot Information Designation: PCI Type: 32-bit PCI Current Usage: Available Length: Long ID: 13 Characteristics: 5.0 V is provided Handle 0x0018 DMI type 9, 13 bytes. System Slot Information Designation: PCI Type: 32-bit PCI Current Usage: Available Length: Long ID: 14 Characteristics: 5.0 V is provided Handle 0x0019 DMI type 9, 13 bytes. System Slot Information Designation: AGP Type: 32-bit AGP Current Usage: Available Length: Long ID: 8 Characteristics: 5.0 V is provided Handle 0x001A DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: USB Internal Connector Type: None External Reference Designator: External Connector Type: Other Port Type: USB Handle 0x001B DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x001C DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 512 MB Error Information Handle: Not Provided Number Of Devices: 3 Handle 0x001D DMI type 17, 21 bytes. Memory Device Array Handle: 0x001C Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: 256 MB Form Factor: DIMM Set: None Locator: BANK_0 Bank Locator: Bank0/1 Type: Unknown Type Detail: None Handle 0x001E DMI type 17, 21 bytes. Memory Device Array Handle: 0x001C Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: 256 MB Form Factor: DIMM Set: None Locator: BANK_1 Bank Locator: Bank2/3 Type: Unknown Type Detail: None Handle 0x001F DMI type 17, 21 bytes. Memory Device Array Handle: 0x001C Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: BANK_2 Bank Locator: Bank4/5 Type: Unknown Type Detail: None Handle 0x0020 DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000003FFFF Range Size: 256 kB Physical Array Handle: 0x001C Partition Width: 32 Handle 0x0021 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000003FFFF Range Size: 256 kB Physical Device Handle: 0x001D Memory Array Mapped Address Handle: 0x0020 Partition Row Position: 1 Handle 0x0022 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000003FFFF Range Size: 256 kB Physical Device Handle: 0x001E Memory Array Mapped Address Handle: 0x0020 Partition Row Position: 1 Handle 0x0023 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000003FFFF Range Size: 256 kB Physical Device Handle: 0x001F Memory Array Mapped Address Handle: 0x0020 Partition Row Position: 1 Wrong DMI structures length: 1048 bytes announced, structures occupy 1027 bytes.