Another kernel output... 
 
dmesg: 
[4294667.296000] Built 1 zonelists 
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash 
[4294667.296000] mapped APIC to ffffd000 (fee00000) 
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000) 
[4294667.296000] Initializing CPU#0 
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes) 
[4294667.296000] Detected 1830.459 MHz processor. 
[4294667.296000] Using pmtmr for high-res timesource 
[4294667.296000] Console: colour VGA+ 80x25 
[4294670.420000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) 
[4294670.421000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) 
[4294670.448000] Memory: 1031172k/1048384k available (1415k kernel code, 16372k reserved, 763k data, 
224k init, 130880k highmem) 
[4294670.448000] Checking if this processor honours the WP bit even in supervisor mode... Ok. 
[4294670.448000] Calibrating delay loop... 3620.86 BogoMIPS (lpj=1810432) 
[4294670.469000] Security Framework v1.0.0 initialized 
[4294670.469000] SELinux:  Disabled at boot. 
[4294670.469000] Mount-cache hash table entries: 512 
[4294670.469000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 
00000000 00000000 
[4294670.469000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 
00000000 00000000 
[4294670.469000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) 
[4294670.469000] CPU: L2 Cache: 512K (64 bytes/line) 
[4294670.469000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 
00000000 
[4294670.469000] CPU: AMD Athlon(tm) XP  2500+ stepping 00 
[4294670.469000] Enabling fast FPU save and restore... done. 
[4294670.469000] Enabling unmasked SIMD FPU exception support... done. 
[4294670.469000] Checking 'hlt' instruction... OK. 
[4294670.473000] Checking for popad bug... OK. 
[4294670.473000] checking if image is initramfs... it is 
[4294670.854000] Freeing initrd memory: 4671k freed 
[4294670.855000] ACPI: Looking for DSDT in initrd... not found! 
[4294670.903000]  not found! 
[4294670.914000] ENABLING IO-APIC IRQs 
[4294670.915000] ..TIMER: vector=0x31 pin1=0 pin2=-1 
[4294671.026000] NET: Registered protocol family 16 
[4294671.026000] EISA bus registered 
[4294671.026000] ACPI: bus type pci registered 
[4294671.026000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 
[4294671.026000] PCI: Using configuration type 1 
[4294671.026000] mtrr: v2.0 (20020519) 
[4294671.027000] ACPI: Subsystem revision 20050729 
[4294671.035000] ACPI: Interpreter enabled 
[4294671.035000] ACPI: Using IOAPIC for interrupt routing 
[4294671.036000] ACPI: PCI Root Bridge [PCI0] (0000:00) 
[4294671.036000] PCI: Probing PCI hardware (bus 00) 
[4294671.036000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 
[4294671.041000] PCI: nForce2 C1 Halt Disconnect fixup 
[4294671.041000] Boot video device is 0000:01:00.0 
[4294671.052000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] 
[4294671.052000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] 
[4294671.060000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] 
[4294671.061000] ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *0, disabled. 
[4294671.062000] ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *11 
[4294671.062000] ACPI: PCI Interrupt Link [LNKC] (IRQs 18) *0, disabled. 
[4294671.063000] ACPI: PCI Interrupt Link [LNKD] (IRQs 19) *0, disabled. 
[4294671.063000] ACPI: PCI Interrupt Link [LNKE] (IRQs 16) *0, disabled. 
[4294671.064000] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *11 
[4294671.064000] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *11 
[4294671.065000] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *5 
[4294671.065000] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *10 
[4294671.066000] ACPI: PCI Interrupt Link [LAPU] (IRQs 20 21 22) *0, disabled. 
[4294671.066000] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *10 
[4294671.067000] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. 
[4294671.067000] ACPI: PCI Interrupt Link [LKSM] (IRQs 23) *10 
[4294671.068000] ACPI: PCI Interrupt Link [LFWR] (IRQs 20 21 22) *0, disabled. 
[4294671.068000] ACPI: PCI Interrupt Link [LETH] (IRQs 20 21 22) *0, disabled. 
[4294671.069000] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14 
[4294671.069000] Linux Plug and Play Support v0.97 (c) Adam Belay 
[4294671.069000] pnp: PnP ACPI init 
[4294671.076000] pnp: PnP ACPI: found 13 devices 
[4294671.076000] PnPBIOS: Disabled by ACPI PNP 
[4294671.076000] PCI: Using ACPI for IRQ routing 
[4294671.076000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report 
[4294671.088000] pnp: 00:09: ioport range 0x480-0x487 has been reserved 
[4294671.089000] audit: initializing netlink socket (disabled) 
[4294671.089000] audit(1126679161.087:0): initialized 
[4294671.089000] highmem bounce pool size: 64 pages 
[4294671.089000] VFS: Disk quotas dquot_6.5.1 
[4294671.089000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) 
[4294671.089000] devfs: 2004-01-31 Richard Gooch (<email address hidden>) 
[4294671.089000] devfs: boot_options: 0x0 
[4294671.089000] Initializing Cryptographic API 
[4294671.089000] isapnp: Scanning for PnP cards... 
[4294671.446000] isapnp: No Plug & Play device found 
[4294671.464000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12 
[4294671.466000] serio: i8042 AUX port at 0x60,0x64 irq 12 
[4294671.466000] serio: i8042 KBD port at 0x60,0x64 irq 1 
[4294671.466000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled 
[4294671.466000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 
[4294671.466000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 
[4294671.468000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 
[4294671.468000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 
[4294671.468000] io scheduler noop registered 
[4294671.468000] io scheduler anticipatory registered 
[4294671.468000] io scheduler deadline registered 
[4294671.468000] io scheduler cfq registered 
[4294671.469000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize 
[4294671.469000] EISA: Probing bus 0 at eisa.0 
[4294671.469000] Cannot allocate resource for EISA slot 4 
[4294671.469000] EISA: Detected 0 cards. 
[4294671.469000] NET: Registered protocol family 2 
[4294671.478000] IP: routing cache hash table of 8192 buckets, 64Kbytes 
[4294671.478000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) 
[4294671.480000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) 
[4294671.481000] TCP: Hash tables configured (established 262144 bind 65536) 
[4294671.481000] NET: Registered protocol family 8 
[4294671.481000] NET: Registered protocol family 20 
[4294671.481000] ACPI wakeup devices: 
[4294671.481000] PCI0 PS2K PS2M UAR1 UAR2  MAC USB0 USB1 USB2  FWR PCI1 
[4294671.481000] ACPI: (supports S0 S1 S3 S4 S5) 
[4294671.481000] Freeing unused kernel memory: 224k freed 
[4294671.512000] Capability LSM initialized 
[4294671.524000] NET: Registered protocol family 1 
[4294671.535000] input: AT Translated Set 2 keyboard on isa0060/serio0 
[4294671.592000] usbcore: registered new driver usbfs 
[4294671.592000] usbcore: registered new driver hub 
[4294671.592000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) 
[4294671.593000] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 
[4294671.593000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, high) -> IRQ 22 
[4294671.593000] PCI: Setting latency timer of device 0000:00:02.0 to 64 
[4294671.593000] ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller 
[4294673.124000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 
[4294673.124000] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe900000 
[4294673.177000] hub 1-0:1.0: USB hub found 
[4294673.177000] hub 1-0:1.0: 3 ports detected 
[4294673.180000] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21 
[4294673.180000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 21 (level, high) -> IRQ 21 
[4294673.180000] PCI: Setting latency timer of device 0000:00:02.1 to 64 
[4294673.180000] ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2) 
[4294674.711000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 
[4294674.711000] ohci_hcd 0000:00:02.1: irq 21, io mem 0xfea00000 
[4294674.764000] hub 2-0:1.0: USB hub found 
[4294674.764000] hub 2-0:1.0: 3 ports detected 
[4294674.782000] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 
[4294674.782000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, high) -> IRQ 20 
[4294674.782000] PCI: Setting latency timer of device 0000:00:02.2 to 64 
[4294674.782000] ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller 
[4294674.782000] ehci_hcd 0000:00:02.2: debug port 1 
[4294674.782000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 
[4294674.782000] ehci_hcd 0000:00:02.2: irq 20, io mem 0xfeb00000 
[4294674.783000] PCI: cache line size of 64 is not supported by device 0000:00:02.2 
[4294674.783000] ehci_hcd 0000:00:02.2: park 0 
[4294674.783000] ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 
[4294674.783000] hub 3-0:1.0: USB hub found 
[4294674.783000] hub 3-0:1.0: 6 ports detected 
[4294674.813000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.32. 
[4294674.813000] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22 
[4294674.813000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LKLN] -> GSI 22 (level, high) -> IRQ 22 
[4294674.813000] PCI: Setting latency timer of device 0000:00:04.0 to 64 
[4294675.074000] usb 3-5: new high speed USB device using ehci_hcd and address 2 
[4294675.136000] usb 3-5: device descriptor read/64, error -71 
[4294675.299000] usb 3-5: device descriptor read/64, error -71 
[4294675.326000] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0 
[4294675.350000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 
[4294675.350000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx 
[4294675.350000] ACPI: bus type ide registered 
[4294675.354000] SCSI subsystem initialized 
[4294675.354000] libata version 1.11 loaded. 
[4294675.462000] usb 3-5: new high speed USB device using ehci_hcd and address 3 
[4294675.524000] usb 3-5: device descriptor read/64, error -71 
[4294675.687000] usb 3-5: device descriptor read/64, error -71 
[4294675.850000] usb 3-5: new high speed USB device using ehci_hcd and address 4 
[4294676.252000] usb 3-5: device not accepting address 4, error -71 
[4294676.314000] usb 3-5: new high speed USB device using ehci_hcd and address 5 
[4294676.716000] usb 3-5: device not accepting address 5, error -71 
[4294677.395000] NFORCE2: IDE controller at PCI slot 0000:00:09.0 
[4294677.395000] NFORCE2: chipset revision 162 
[4294677.395000] NFORCE2: not 100% native mode: will probe irqs later 
[4294677.395000] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. 
[4294677.395000] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller 
[4294677.395000]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio 
[4294677.395000]     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio 
[4294677.395000] Probing IDE interface ide0... 
[4294677.659000] hda: Maxtor 6Y120P0, ATA DISK drive 
[4294678.271000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 
[4294678.271000] Probing IDE interface ide1... 
[4294678.943000] hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive 
[4294679.249000] ide1 at 0x170-0x177,0x376 on irq 15 
[4294679.249000] Probing IDE interface ide2... 
[4294679.762000] Probing IDE interface ide3... 
[4294680.274000] Probing IDE interface ide4... 
[4294680.786000] Probing IDE interface ide5... 
[4294681.301000] hda: max request size: 128KiB 
[4294681.311000] hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133) 
[4294681.311000] hda: cache flushes supported 
[4294681.311000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > 
[4294681.343000] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache 
[4294681.343000] Uniform CD-ROM driver Revision: 3.20 
[4294681.590000] ACPI: CPU0 (power states: C1[C1]) 
[4294681.596000] vga16fb: initializing 
[4294681.596000] vga16fb: mapped to 0xc00a0000 
[4294681.766000] Console: switching to colour frame buffer device 80x30 
[4294681.766000] fb0: VGA16 VGA frame buffer device 
[4294681.962000] Attempting manual resume 
[4294681.984000] swsusp: Suspend partition has wrong signature? 
[4294682.014000] kjournald starting.  Commit interval 5 seconds 
[4294682.014000] EXT3-fs: mounted filesystem with ordered data mode. 
[4294683.195000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 
[4294687.073000] Adding 2650684k swap on /dev/hda5.  Priority:-1 extents:1 
[4294687.331000] EXT3 FS on hda1, internal journal 
[4294693.370000] parport: PnPBIOS parport detected. 
[4294693.370000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] 
[4294693.455000] lp0: using parport0 (interrupt-driven). 
[4294693.468000] mice: PS/2 mouse device common for all mice 
[4294693.485000] Linux agpgart interface v0.101 (c) Dave Jones 
[4294693.506000] nvidia: module license 'NVIDIA' taints kernel. 
[4294693.511000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 
[4294693.511000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 18 (level, high) -> IRQ 18 
[4294693.512000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7667  Fri Jun 17 07:01:04 
PDT 2005 
[4294693.935000] input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 
[4294696.645000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: <email address hidden> 
[4294697.773000] cdrom: open failed. 
[4294700.166000] agpgart: Detected NVIDIA nForce2 chipset 
[4294700.188000] agpgart: AGP aperture is 128M @ 0xf0000000 
[4294700.611000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4300 
[4294700.624000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4340 
[4294700.946000] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 21 
[4294700.946000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LAUI] -> GSI 21 (level, high) -> IRQ 21 
[4294700.946000] PCI: Setting latency timer of device 0000:00:06.0 to 64 
[4294701.257000] intel8x0_measure_ac97_clock: measured 49734 usecs 
[4294701.257000] intel8x0: clocking to 47428 
[4294701.796000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 
[4294701.810000] shpchp: shpc_init : shpc_cap_offset == 0 
[4294701.810000] shpchp: shpc_init : shpc_cap_offset == 0 
[4294701.810000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 
[4294703.295000] Real Time Clock Driver v1.12 
[4294703.337000] input: PC Speaker 
[4294703.931000] ts: Compaq touchscreen protocol output 
[4294705.130000] NET: Registered protocol family 17 
[4294705.811000] NET: Registered protocol family 10 
[4294705.812000] Disabled Privacy Extensions on device c02eb280(lo) 
[4294705.812000] IPv6 over IPv4 tunneling driver 
[4294707.093000] ACPI: Power Button (FF) [PWRF] 
[4294707.093000] ACPI: Power Button (CM) [PWRB] 
[4294707.167000] Using specific hotkey driver 
[4294707.196000] ibm_acpi: ec object not found 
[4294712.111000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) 
[4294712.111000] apm: overridden by ACPI. 
[4294714.103000] Bluetooth: Core ver 2.7 
[4294714.103000] NET: Registered protocol family 31 
[4294714.103000] Bluetooth: HCI device and connection manager initialized 
[4294714.103000] Bluetooth: HCI socket layer initialized 
[4294714.143000] Bluetooth: L2CAP ver 2.7 
[4294714.143000] Bluetooth: L2CAP socket layer initialized 
[4294714.305000] Bluetooth: RFCOMM ver 1.5 
[4294714.305000] Bluetooth: RFCOMM socket layer initialized 
[4294714.305000] Bluetooth: RFCOMM TTY layer initialized 
[4294716.572000] eth0: no IPv6 routers present