ng at 3bf00000 (gap: 3bf00000:a4100000) [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ 5cc2000000 size 32 MB [ 0.000000] Aperture from northbridge cpu 0 too small (32 MB) [ 0.000000] No AGP bridge found [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/hda1 ro no_timer_check quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 3.579545 MHz PM timer. [ 0.000000] time.c: Detected 1790.877 MHz processor. [ 16.012578] time.c: Using PIT/TSC based timekeeping. [ 16.014249] Console: colour VGA+ 80x25 [ 16.015009] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 16.015960] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 16.030431] Memory: 957744k/981952k available (1620k kernel code, 23300k reserved, 997k data, 136k init) [ 16.030475] Calibrating delay loop... 3522.56 BogoMIPS (lpj=1761280) [ 16.050594] Security Framework v1.0.0 initialized [ 16.050598] SELinux: Disabled at boot. [ 16.050608] Mount-cache hash table entries: 256 [ 16.050671] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.050674] CPU: L2 Cache: 512K (64 bytes/line) [ 16.050679] CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 [ 16.050767] checking if image is initramfs... it is [ 16.428479] ACPI: Looking for DSDT in initrd... not found! [ 16.514523] not found! [ 16.526978] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 16.526989] failed. [ 16.526991] timer doesn't work through the IO-APIC - disabling NMI Watchdog! [ 16.527707] Uhhuh. NMI received for unknown reason 2d. [ 16.527709] Dazed and confused, but trying to continue [ 16.527712] Do you have a strange power saving mode enabled? [ 16.536828] works. [ 16.536830] Using local APIC timer interrupts. [ 16.592692] Detected 12.436 MHz APIC timer. [ 16.592706] testing NMI watchdog ... CPU#0: NMI appears to be stuck (1->1)! [ 16.602730] NET: Registered protocol family 16 [ 16.602749] ACPI: bus type pci registered [ 16.602755] PCI: Using configuration type 1 [ 16.602758] mtrr: v2.0 (20020519) [ 16.603023] ACPI: Subsystem revision 20050729 [ 16.615357] ACPI: Interpreter enabled [ 16.615360] ACPI: Using IOAPIC for interrupt routing [ 16.615799] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 16.615803] PCI: Probing PCI hardware (bus 00) [ 16.615863] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 [ 16.615868] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [ 16.617643] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 [ 16.617920] Boot video device is 0000:01:05.0 [ 16.618193] PCI: Transparent bridge - 0000:00:14.4 [ 16.635100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 16.635726] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.635920] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.636112] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.636306] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.636497] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11) [ 16.636698] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11) [ 16.636890] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11), disabled. [ 16.637080] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11) [ 16.637363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 16.639222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 16.639405] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.639412] pnp: PnP ACPI init [ 16.642085] pnp: PnP ACPI: found 13 devices [ 16.642146] usbcore: registered new driver usbfs [ 16.642164] usbcore: registered new driver hub [ 16.642193] PCI: Using ACPI for IRQ routing [ 16.642196] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.642205] PCI: Cannot allocate resource region 3 of device 0000:00:00.0 [ 16.642295] PCI-DMA: Disabling IOMMU. [ 16.642732] pnp: 00:00: ioport range 0x228-0x22f has been reserved [ 16.642736] pnp: 00:00: ioport range 0x40b-0x40b has been reserved [ 16.642739] pnp: 00:00: ioport range 0x4d6-0x4d6 has been reserved [ 16.642742] pnp: 00:00: ioport range 0xc00-0xc01 has been reserved [ 16.642746] pnp: 00:00: ioport range 0xc14-0xc14 has been reserved [ 16.642749] pnp: 00:00: ioport range 0xc50-0xc52 has been reserved [ 16.642752] pnp: 00:00: ioport range 0xc6c-0xc6d has been reserved [ 16.642756] pnp: 00:00: ioport range 0xc6f-0xc6f has been reserved [ 16.643003] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 16.643169] audit: initializing netlink socket (disabled) [ 16.643176] audit: initialized [ 16.643263] VFS: Disk quotas dquot_6.5.1 [ 16.643277] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 16.643303] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) [ 16.643307] devfs: boot_options: 0x0 [ 16.643330] Initializing Cryptographic API [ 16.658387] Linux agpgart interface v0.101 (c) Dave Jones [ 16.658449] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 17.203261] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.203847] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.203862] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 17.204038] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.205612] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.205687] io scheduler noop registered [ 17.205699] io scheduler anticipatory registered [ 17.205704] io scheduler deadline registered [ 17.205711] io scheduler cfq registered [ 17.205985] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.206036] NET: Registered protocol family 2 [ 17.230558] IP: routing cache hash table of 8192 buckets, 64Kbytes [ 17.230689] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.231271] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 17.231541] TCP: Hash tables configured (established 131072 bind 65536) [ 17.231603] NET: Registered protocol family 8 [ 17.231605] NET: Registered protocol family 20 [ 17.231686] ACPI wakeup devices: [ 17.231688] PCI0 USB0 USB1 USB2 AUDO P2P MAC [ 17.231692] ACPI: (supports S0 S1 S3 S4bios S5) [ 17.231838] Freeing unused kernel memory: 136k freed [ 17.266983] input: AT Translated Set 2 keyboard on isa0060/serio0 [ 17.271861] vga16fb: initializing [ 17.271865] vga16fb: mapped to 0xffff8100000a0000 [ 17.362423] Console: switching to colour frame buffer device 80x30 [ 17.362427] fb0: VGA16 VGA frame buffer device [ 18.473405] Capability LSM initialized [ 18.481739] NET: Registered protocol family 1 [ 18.490027] SCSI subsystem initialized [ 18.491094] libata version 1.11 loaded. [ 18.492261] sata_sil version 0.9 [ 18.492281] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 18.492335] ata1: SATA max UDMA/100 cmd 0xFFFFC2000003A080 ctl 0xFFFFC2000003A08A bmdma 0xFFFFC2000003A000 irq 23 [ 18.492356] ata2: SATA max UDMA/100 cmd 0xFFFFC2000003A0C0 ctl 0xFFFFC2000003A0CA bmdma 0xFFFFC2000003A008 irq 23 [ 18.693084] ata1: no device found (phy stat 00000000) [ 18.693087] scsi0 : sata_sil [ 18.894123] ata2: no device found (phy stat 00000000) [ 18.894125] scsi1 : sata_sil [ 18.894868] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 18.894901] ata3: SATA max UDMA/100 cmd 0xFFFFC2000003C080 ctl 0xFFFFC2000003C08A bmdma 0xFFFFC2000003C000 irq 22 [ 18.894922] ata4: SATA max UDMA/100 cmd 0xFFFFC2000003C0C0 ctl 0xFFFFC2000003C0CA bmdma 0xFFFFC2000003C008 irq 22 [ 19.095161] ata3: no device found (phy stat 00000000) [ 19.095164] scsi2 : sata_sil [ 19.296200] ata4: no device found (phy stat 00000000) [ 19.296203] scsi3 : sata_sil [ 19.310165] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 19.310174] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 19.310178] ACPI: bus type ide registered [ 19.316416] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 19.316435] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 19.316446] ATIIXP: chipset revision 0 [ 19.316449] ATIIXP: not 100% native mode: will probe irqs later [ 19.316459] ide0: BM-DMA at 0xf300-0xf307, BIOS settings: hda:pio, hdb:pio [ 19.316472] ide1: BM-DMA at 0xf308-0xf30f, BIOS settings: hdc:pio, hdd:pio [ 19.316481] Probing IDE interface ide0... [ 19.580679] hda: Maxtor 6Y120P0, ATA DISK drive [ 19.988757] hdb: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive [ 20.039547] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 20.039624] Probing IDE interface ide1... [ 20.558473] Probing IDE interface ide1... [ 21.076541] Probing IDE interface ide2... [ 21.588640] Probing IDE interface ide3... [ 22.100740] Probing IDE interface ide4... [ 22.612839] Probing IDE interface ide5... [ 23.127976] hda: max request size: 128KiB [ 23.138273] hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100) [ 23.138400] hda: cache flushes supported [ 23.138448] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > [ 23.171624] hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache [ 23.171630] Uniform CD-ROM driver Revision: 3.20 [ 23.389375] Attempting manual resume [ 23.392182] swsusp: Suspend partition has wrong signature? [ 23.414332] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 23.414371] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 23.414388] ohci_hcd 0000:00:13.0: PCI device 1002:4374 (ATI Technologies Inc) [ 23.437118] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 23.437127] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02d000 [ 23.492037] hub 1-0:1.0: USB hub found [ 23.492049] hub 1-0:1.0: 4 ports detected [ 23.497028] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 23.497039] ohci_hcd 0000:00:13.1: PCI device 1002:4375 (ATI Technologies Inc) [ 23.520044] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 23.520050] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02c000 [ 23.575040] hub 2-0:1.0: USB hub found [ 23.575050] hub 2-0:1.0: 4 ports detected [ 23.589300] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 23.589316] ehci_hcd 0000:00:13.2: PCI device 1002:4373 (ATI Technologies Inc) [ 23.589369] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 23.589376] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02b000 [ 23.589420] ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 [ 23.589484] hub 3-0:1.0: USB hub found [ 23.589491] hub 3-0:1.0: 8 ports detected [ 23.656764] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [ 23.656793] 8139cp: pci dev 0000:02:03.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 23.656796] 8139cp: Try the "8139too" driver instead. [ 23.658134] 8139too Fast Ethernet driver 0.9.27 [ 23.658179] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 23.658813] eth0: RealTek RTL8139 at 0xffffc20000048000, 00:13:d3:21:50:72, IRQ 20 [ 23.658817] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 23.883089] usb 3-7: new high speed USB device using ehci_hcd and address 2 [ 25.683125] Initializing USB Mass Storage driver... [ 25.683702] scsi4 : SCSI emulation for USB Mass Storage devices [ 25.683744] usb-storage: device found at 2 [ 25.683746] usb-storage: waiting for device to settle before scanning [ 25.683751] usbcore: registered new driver usb-storage [ 25.683754] USB Mass Storage support registered. [ 26.003526] ACPI: CPU0 (power states: C1[C1]) [ 26.003531] ACPI: Processor [CPU0] (supports 8 throttling states) [ 26.151695] Attempting manual resume [ 26.151862] swsusp: Suspend partition has wrong signature? [ 26.170387] kjournald starting. Commit interval 5 seconds [ 26.170397] EXT3-fs: mounted filesystem with ordered data mode. [ 27.169672] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 29.873464] Adding 2803300k swap on /dev/hda5. Priority:-1 extents:1 [ 30.125544] EXT3 FS on hda1, internal journal [ 30.688225] Vendor: USB2.0 Model: CF CardReader Rev: [ 30.688233] Type: Direct-Access ANSI SCSI revision: 00 [ 30.693478] Vendor: USB2.0 Model: CBO CardReader Rev: [ 30.693486] Type: Direct-Access ANSI SCSI revision: 00 [ 30.695069] usb-storage: device scan complete [ 36.280014] Attached scsi removable disk sda at scsi4, channel 0, id 0, lun 0 [ 36.286026] Attached scsi removable disk sdb at scsi4, channel 0, id 0, lun 1 [ 36.644137] parport: PnPBIOS parport detected. [ 36.644182] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] [ 36.729600] lp0: using parport0 (interrupt-driven). [ 36.755852] mice: PS/2 mouse device common for all mice [ 36.812139] Real Time Clock Driver v1.12 [ 36.824474] ieee1394: Initialized config rom entry `ip1394' [ 36.828922] sbp2: $Rev: 1219 $ Ben Collins [ 37.237847] input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 [ 37.549776] ts: Compaq touchscreen protocol output [ 39.726079] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [ 40.346298] cdrom: open failed. [ 42.375734] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 42.379887] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 [ 42.379891] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 [ 42.989681] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 43.587637] ohci1394: $Rev: 1250 $ Ben Collins [ 43.587663] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 43.587671] PCI: Via IRQ fixup for 0000:02:04.0, from 11 to 5 [ 43.643716] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fdcfe000-fdcfe7ff] Max Packet=[2048] [ 44.908043] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000aa82b3] [ 45.251468] input: PC Speaker [ 45.349074] FDC 0 is a post-1991 82077 [ 46.862213] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 46.870180] NET: Registered protocol family 17 [ 51.053542] NET: Registered protocol family 10 [ 51.053632] Disabled Privacy Extensions on device ffffffff8035a5a0(lo) [ 51.053755] IPv6 over IPv4 tunneling driver [ 52.549166] ACPI: Power Button (FF) [PWRF] [ 52.549175] ACPI: Power Button (CM) [PWRB] [ 52.630811] ibm_acpi: ec object not found [ 60.032937] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4) [ 60.033186] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV) [ 60.033191] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) [ 60.033383] cpu_init done, current fid 0xa, vid 0x6 [ 60.303273] Bluetooth: Core ver 2.7 [ 60.303280] NET: Registered protocol family 31 [ 60.303283] Bluetooth: HCI device and connection manager initialized [ 60.303293] Bluetooth: HCI socket layer initialized [ 60.348011] Bluetooth: L2CAP ver 2.7 [ 60.348016] Bluetooth: L2CAP socket layer initialized [ 60.421478] Bluetooth: RFCOMM ver 1.5 [ 60.421486] Bluetooth: RFCOMM socket layer initialized [ 60.421498] Bluetooth: RFCOMM TTY layer initialized [ 61.669395] eth0: no IPv6 routers present [ 698.372119] APIC error on CPU0: 00(40)