ADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 3bf00000 (gap: 3bf00000:a4100000) [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ 58c2000000 size 32 MB [ 0.000000] Aperture from northbridge cpu 0 too small (32 MB) [ 0.000000] No AGP bridge found [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/hda1 ro no_timer_check quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 3.579545 MHz PM timer. [ 0.000000] time.c: Detected 1790.874 MHz processor. [ 15.807063] time.c: Using PIT/TSC based timekeeping. [ 15.808728] Console: colour VGA+ 80x25 [ 15.809514] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 15.810474] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 15.824926] Memory: 957488k/981952k available (1620k kernel code, 23684k reserved, 997k data, 136k init) [ 15.824972] Calibrating delay loop... 3522.56 BogoMIPS (lpj=1761280) [ 15.845081] Security Framework v1.0.0 initialized [ 15.845085] SELinux: Disabled at boot. [ 15.845094] Mount-cache hash table entries: 256 [ 15.845158] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 15.845161] CPU: L2 Cache: 512K (64 bytes/line) [ 15.845165] CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 [ 15.845256] checking if image is initramfs... it is [ 16.250324] ACPI: Looking for DSDT in initrd... not found! [ 16.342874] not found! [ 16.355143] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 16.355165] failed. [ 16.355167] timer doesn't work through the IO-APIC - disabling NMI Watchdog! [ 16.355872] Uhhuh. NMI received for unknown reason 3d. [ 16.355875] Dazed and confused, but trying to continue [ 16.355877] Do you have a strange power saving mode enabled? [ 16.365006] works. [ 16.365008] Using local APIC timer interrupts. [ 16.420871] Detected 12.436 MHz APIC timer. [ 16.420885] testing NMI watchdog ... CPU#0: NMI appears to be stuck (1->1)! [ 16.430898] NET: Registered protocol family 16 [ 16.430916] ACPI: bus type pci registered [ 16.430922] PCI: Using configuration type 1 [ 16.430925] mtrr: v2.0 (20020519) [ 16.431201] ACPI: Subsystem revision 20050729 [ 16.443427] ACPI: Interpreter enabled [ 16.443429] ACPI: Using IOAPIC for interrupt routing [ 16.443857] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 16.443860] PCI: Probing PCI hardware (bus 00) [ 16.443921] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 [ 16.443925] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [ 16.445695] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 [ 16.445956] Boot video device is 0000:01:05.0 [ 16.446238] PCI: Transparent bridge - 0000:00:14.4 [ 16.462879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 16.463500] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.463692] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.463882] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.464071] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.464272] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11) [ 16.464460] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11) [ 16.464649] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11), disabled. [ 16.464837] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11) [ 16.465118] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 16.466955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 16.467133] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.467139] pnp: PnP ACPI init [ 16.469770] pnp: PnP ACPI: found 13 devices [ 16.469835] usbcore: registered new driver usbfs [ 16.469854] usbcore: registered new driver hub [ 16.469881] PCI: Using ACPI for IRQ routing [ 16.469885] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.469894] PCI: Cannot allocate resource region 3 of device 0000:00:00.0 [ 16.469984] PCI-DMA: Disabling IOMMU. [ 16.470415] pnp: 00:00: ioport range 0x228-0x22f has been reserved [ 16.470419] pnp: 00:00: ioport range 0x40b-0x40b has been reserved [ 16.470422] pnp: 00:00: ioport range 0x4d6-0x4d6 has been reserved [ 16.470425] pnp: 00:00: ioport range 0xc00-0xc01 has been reserved [ 16.470429] pnp: 00:00: ioport range 0xc14-0xc14 has been reserved [ 16.470432] pnp: 00:00: ioport range 0xc50-0xc52 has been reserved [ 16.470435] pnp: 00:00: ioport range 0xc6c-0xc6d has been reserved [ 16.470439] pnp: 00:00: ioport range 0xc6f-0xc6f has been reserved [ 16.470686] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 16.470852] audit: initializing netlink socket (disabled) [ 16.470859] audit: initialized [ 16.470943] VFS: Disk quotas dquot_6.5.1 [ 16.470957] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 16.470980] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) [ 16.470985] devfs: boot_options: 0x0 [ 16.471009] Initializing Cryptographic API [ 16.485970] Linux agpgart interface v0.101 (c) Dave Jones [ 16.486034] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 17.031035] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.031620] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.031625] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 17.031803] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.033392] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.033463] io scheduler noop registered [ 17.033474] io scheduler anticipatory registered [ 17.033479] io scheduler deadline registered [ 17.033486] io scheduler cfq registered [ 17.033751] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.033803] NET: Registered protocol family 2 [ 17.056332] IP: routing cache hash table of 8192 buckets, 64Kbytes [ 17.056466] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.057362] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 17.057652] TCP: Hash tables configured (established 131072 bind 65536) [ 17.057717] NET: Registered protocol family 8 [ 17.057719] NET: Registered protocol family 20 [ 17.059245] ACPI wakeup devices: [ 17.059248] PCI0 USB0 USB1 USB2 AUDO P2P MAC [ 17.059252] ACPI: (supports S0 S1 S3 S4bios S5) [ 17.059399] Freeing unused kernel memory: 136k freed [ 17.092873] input: AT Translated Set 2 keyboard on isa0060/serio0 [ 17.097498] vga16fb: initializing [ 17.097501] vga16fb: mapped to 0xffff8100000a0000 [ 17.188032] Console: switching to colour frame buffer device 80x30 [ 17.188036] fb0: VGA16 VGA frame buffer device [ 18.298970] Capability LSM initialized [ 18.307338] NET: Registered protocol family 1 [ 18.315597] SCSI subsystem initialized [ 18.316652] libata version 1.11 loaded. [ 18.317818] sata_sil version 0.9 [ 18.317838] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 18.317890] ata1: SATA max UDMA/100 cmd 0xFFFFC2000003A080 ctl 0xFFFFC2000003A08A bmdma 0xFFFFC2000003A000 irq 23 [ 18.317912] ata2: SATA max UDMA/100 cmd 0xFFFFC2000003A0C0 ctl 0xFFFFC2000003A0CA bmdma 0xFFFFC2000003A008 irq 23 [ 18.518575] ata1: no device found (phy stat 00000000) [ 18.518578] scsi0 : sata_sil [ 18.719615] ata2: no device found (phy stat 00000000) [ 18.719617] scsi1 : sata_sil [ 18.720361] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 18.720393] ata3: SATA max UDMA/100 cmd 0xFFFFC2000003C080 ctl 0xFFFFC2000003C08A bmdma 0xFFFFC2000003C000 irq 22 [ 18.720414] ata4: SATA max UDMA/100 cmd 0xFFFFC2000003C0C0 ctl 0xFFFFC2000003C0CA bmdma 0xFFFFC2000003C008 irq 22 [ 18.920653] ata3: no device found (phy stat 00000000) [ 18.920655] scsi2 : sata_sil [ 19.121692] ata4: no device found (phy stat 00000000) [ 19.121695] scsi3 : sata_sil [ 19.135634] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 19.135644] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 19.135647] ACPI: bus type ide registered [ 19.141852] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 19.141871] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 19.141882] ATIIXP: chipset revision 0 [ 19.141884] ATIIXP: not 100% native mode: will probe irqs later [ 19.141894] ide0: BM-DMA at 0xf300-0xf307, BIOS settings: hda:pio, hdb:pio [ 19.141908] ide1: BM-DMA at 0xf308-0xf30f, BIOS settings: hdc:pio, hdd:pio [ 19.141916] Probing IDE interface ide0... [ 19.406169] hda: Maxtor 6Y120P0, ATA DISK drive [ 19.814247] hdb: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive [ 19.865026] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 19.865102] Probing IDE interface ide1... [ 20.383964] Probing IDE interface ide1... [ 20.902033] Probing IDE interface ide2... [ 21.414132] Probing IDE interface ide3... [ 21.926232] Probing IDE interface ide4... [ 22.438331] Probing IDE interface ide5... [ 22.953447] hda: max request size: 128KiB [ 22.967635] hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100) [ 22.967762] hda: cache flushes supported [ 22.967811] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > [ 23.000020] hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache [ 23.000026] Uniform CD-ROM driver Revision: 3.20 [ 23.216845] Attempting manual resume [ 23.220594] swsusp: Suspend partition has wrong signature? [ 23.242678] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 23.242719] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 23.242736] ohci_hcd 0000:00:13.0: PCI device 1002:4374 (ATI Technologies Inc) [ 23.265605] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 23.265615] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02d000 [ 23.320531] hub 1-0:1.0: USB hub found [ 23.320543] hub 1-0:1.0: 4 ports detected [ 23.325519] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 23.325530] ohci_hcd 0000:00:13.1: PCI device 1002:4375 (ATI Technologies Inc) [ 23.348537] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 23.348542] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02c000 [ 23.403534] hub 2-0:1.0: USB hub found [ 23.403545] hub 2-0:1.0: 4 ports detected [ 23.417779] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 23.417794] ehci_hcd 0000:00:13.2: PCI device 1002:4373 (ATI Technologies Inc) [ 23.417845] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 23.417853] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02b000 [ 23.417896] ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 [ 23.417961] hub 3-0:1.0: USB hub found [ 23.417967] hub 3-0:1.0: 8 ports detected [ 23.485427] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [ 23.485455] 8139cp: pci dev 0000:02:03.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 23.485458] 8139cp: Try the "8139too" driver instead. [ 23.486796] 8139too Fast Ethernet driver 0.9.27 [ 23.486840] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 23.487475] eth0: RealTek RTL8139 at 0xffffc20000048000, 00:13:d3:21:50:72, IRQ 20 [ 23.487478] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 23.711582] usb 3-7: new high speed USB device using ehci_hcd and address 2 [ 25.821286] ACPI: CPU0 (power states: C1[C1]) [ 25.821291] ACPI: Processor [CPU0] (supports 8 throttling states) [ 25.963402] Attempting manual resume [ 25.963558] swsusp: Suspend partition has wrong signature? [ 25.982153] kjournald starting. Commit interval 5 seconds [ 25.982161] EXT3-fs: mounted filesystem with ordered data mode. [ 26.774249] usb 3-7: device descriptor read/64, error -110 [ 27.008790] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 29.959983] Adding 2803300k swap on /dev/hda5. Priority:-1 extents:1 [ 30.222048] EXT3 FS on hda1, internal journal [ 36.040932] parport: PnPBIOS parport detected. [ 36.040978] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] [ 36.127194] lp0: using parport0 (interrupt-driven). [ 36.145807] mice: PS/2 mouse device common for all mice [ 36.178887] Real Time Clock Driver v1.12 [ 36.199151] ieee1394: Initialized config rom entry `ip1394' [ 36.203482] sbp2: $Rev: 1219 $ Ben Collins [ 36.581948] input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 [ 37.515223] ts: Compaq touchscreen protocol output [ 38.521314] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [ 39.363958] cdrom: open failed. [ 41.170014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 41.174171] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 [ 41.174191] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 [ 41.678730] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 41.981357] usb 3-7: device descriptor read/64, error -110 [ 42.148402] usb 3-7: new high speed USB device using ehci_hcd and address 3 [ 42.246473] ohci1394: $Rev: 1250 $ Ben Collins [ 42.246499] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 42.246507] PCI: Via IRQ fixup for 0000:02:04.0, from 11 to 5 [ 42.302700] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fdcfe000-fdcfe7ff] Max Packet=[2048] [ 43.567621] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000aa82b3] [ 45.211045] usb 3-7: device descriptor read/64, error -110 [ 60.377435] usb 3-7: device descriptor read/64, error -110 [ 60.540464] usb 3-7: new high speed USB device using ehci_hcd and address 4 [ 70.944754] usb 3-7: device not accepting address 4, error -110 [ 71.006770] usb 3-7: new high speed USB device using ehci_hcd and address 5 [ 81.411110] usb 3-7: device not accepting address 5, error -110 [ 82.561965] input: PC Speaker [ 82.702197] FDC 0 is a post-1991 82077 [ 84.239982] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 84.247991] NET: Registered protocol family 17 [ 86.776522] NET: Registered protocol family 10 [ 86.776616] Disabled Privacy Extensions on device ffffffff8035a5a0(lo) [ 86.776734] IPv6 over IPv4 tunneling driver [ 87.944692] ACPI: Power Button (FF) [PWRF] [ 87.944702] ACPI: Power Button (CM) [PWRB] [ 88.026640] ibm_acpi: ec object not found [ 94.097338] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4) [ 94.097581] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV) [ 94.097587] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) [ 94.097766] cpu_init done, current fid 0xa, vid 0x6 [ 94.415011] Bluetooth: Core ver 2.7 [ 94.415019] NET: Registered protocol family 31 [ 94.415023] Bluetooth: HCI device and connection manager initialized [ 94.415033] Bluetooth: HCI socket layer initialized [ 94.451285] Bluetooth: L2CAP ver 2.7 [ 94.451289] Bluetooth: L2CAP socket layer initialized [ 94.534295] Bluetooth: RFCOMM ver 1.5 [ 94.534303] Bluetooth: RFCOMM socket layer initialized [ 94.534315] Bluetooth: RFCOMM TTY layer initialized [ 97.385120] eth0: no IPv6 routers present [ 526.464658] cdrom: open failed. [ 735.607740] APIC error on CPU0: 00(40) [ 879.648729] APIC error on CPU0: 40(40) [ 1364.834970] APIC error on CPU0: 40(40) [ 1403.471103] APIC error on CPU0: 40(40)