when connecting with it set to rw

usb 1-1: new full speed USB device using ohci_hcd and address 15
scsi14 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 15
usb-storage: waiting for device to settle before scanning
  Vendor: Generic   Model: Flash Disk        Rev: 7.77
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: assuming drive cache: write through
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: assuming drive cache: write through
 /dev/scsi/host14/bus0/target0/lun0: p1
Attached scsi disk sda at scsi14, channel 0, id 0, lun 0
usb-storage: device scan complete
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!


when connecting with it set to ro

usb 1-1: new full speed USB device using ohci_hcd and address 16
scsi15 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 16
usb-storage: waiting for device to settle before scanning
  Vendor: Generic   Model: Flash Disk        Rev: 7.77
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: assuming drive cache: write through
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: assuming drive cache: write through
 /dev/scsi/host15/bus0/target0/lun0: p1
Attached scsi disk sda at scsi15, channel 0, id 0, lun 0
usb-storage: device scan complete
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!


i also noticed that after making a newfolder, and waiting for a minute for it to
resync and the new folder to disapear this get dumped in dmesg

SCSI error : <15 0 0 0> return code = 0x8000002
Info fld=0x0, Current sda: sense key Data Protect
Additional sense: Write protected
end_request: I/O error, dev sda, sector 265
Buffer I/O error on device sda1, logical block 202
lost page write due to I/O error on sda1
SCSI error : <15 0 0 0> return code = 0x8000002
Info fld=0x0, Current sda: sense key Data Protect
Additional sense: Write protected
end_request: I/O error, dev sda, sector 500
Buffer I/O error on device sda1, logical block 437
lost page write due to I/O error on sda1
SCSI error : <15 0 0 0> return code = 0x8000002
Info fld=0x0, Current sda: sense key Data Protect
Additional sense: Write protected
end_request: I/O error, dev sda, sector 534
Buffer I/O error on device sda1, logical block 471
lost page write due to I/O error on sda1
SCSI error : <15 0 0 0> return code = 0x8000002
Info fld=0x0, Current sda: sense key Data Protect
Additional sense: Write protected
end_request: I/O error, dev sda, sector 207018
Buffer I/O error on device sda1, logical block 206955
lost page write due to I/O error on sda1
SCSI error : <15 0 0 0> return code = 0x8000002
Info fld=0x0, Current sda: sense key Data Protect
Additional sense: Write protected
end_request: I/O error, dev sda, sector 207019
Buffer I/O error on device sda1, logical block 206956
lost page write due to I/O error on sda1
SCSI error : <15 0 0 0> return code = 0x8000002
Info fld=0x0, Current sda: sense key Data Protect
Additional sense: Write protected
end_request: I/O error, dev sda, sector 207020
Buffer I/O error on device sda1, logical block 206957
lost page write due to I/O error on sda1
SCSI error : <15 0 0 0> return code = 0x8000002
Info fld=0x0, Current sda: sense key Data Protect
Additional sense: Write protected
end_request: I/O error, dev sda, sector 207021
Buffer I/O error on device sda1, logical block 206958
lost page write due to I/O error on sda1


and nautilus wont let me make a new folder saying
"error "read only file system" creating new folder"