Dmesg:\n Bootdata ok (command line is root=/dev/hdc2 ro console=tty0 quiet splash) Linux version 2.6.11-1-amd64-k8 (buildd@yellow) (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 Fri Feb 11 14:45:56 UTC 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff40000 (usable) BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data) BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f76e0 ACPI: RSDT (v001 A M I OEMRSDT 0x05000425 MSFT 0x00000097) @ 0x000000001ff40000 ACPI: FADT (v001 A M I OEMFACP 0x05000425 MSFT 0x00000097) @ 0x000000001ff40200 ACPI: OEMB (v001 A M I OEMBIOS 0x05000425 MSFT 0x00000097) @ 0x000000001ff50040 >>> ERROR: Invalid checksum ACPI: DSDT (v001 L5DK8 L5DK8014 0x00000014 INTL 0x02002026) @ 0x0000000000000000 On node 0 totalpages: 130880 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126784 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Nvidia board detected. Ignoring ACPI timer override. Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: ASUSTeK <6>Product ID: L5D <6>APIC at: 0xFEE00000 Processor #0 15:4 APIC version 16 I/O APIC #1 Version 17 at 0xFEC00000. Setting APIC routing to flat Processors: 1 Checking aperture... CPU 0: aperture @ e8000000 size 128 MB Built 1 zonelists Kernel command line: root=/dev/hdc2 ro console=tty0 quiet splash Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 1795.383 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 506488k/523520k available (1794k kernel code, 16320k reserved, 1015k data, 152k init) Calibrating delay loop... 3555.32 BogoMIPS (lpj=1777664) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 0a ACPI: Looking for DSDT in initrd... not found! ACPI: setting ELCR to 0200 (from 0c20) Using local APIC NMI watchdog using perfctr0 Using IO-APIC 1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC works. Using local APIC timer interrupts. Detected 12.467 MHz APIC timer. checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050125 ACPI-1138: *** Error: Method execution failed [\MCTH] (Node ffff8100018bdd00), AE_AML_BUFFER_LIMIT ACPI-1138: *** Error: Method execution failed [\OSVR] (Node ffff8100018b8480), AE_AML_BUFFER_LIMIT ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0._INI] (Node ffff8100018b7200), AE_AML_BUFFER_LIMIT ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 37) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUS0] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUS1] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUS2] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LKLN] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAUI] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LKMO] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 3 4 6 7 10 11 12 *14 15) ACPI: Power Resource [GFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 128M @ 0xe8000000 PCI-DMA: Disabling IOMMU. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1110646871.284:0): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API inotify device minor=63 Linux agpgart interface v0.100 (c) Dave Jones [drm] Initialized drm 1.0.0 20040925 ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1 ACPI: PS/2 Mouse Controller [PS2M] at irq 12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI Interrupt Link [LKMO] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:00:06.1[B] -> GSI 10 (level, low) -> IRQ 10 ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 6, 262144 bytes) TCP: Hash tables configured (established 32768 bind 32768) NET: Registered protocol family 8 NET: Registered protocol family 20 Restarting tasks...<6> Strange, khubd not stopped Strange, kswapd0 not stopped Strange, kseriod not stopped done ACPI wakeup devices: MDM P0P1 LAN0 LAN1 USB0 USB1 USB2 SLPB ACPI: (supports S0 S1 S3 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4228KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 152k freed ACPI: Fan [FN00] (off) ACPI: Thermal Zone [THRM] (54 C) NET: Registered protocol family 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3-150: IDE controller at PCI slot 0000:00:08.0 NFORCE3-150: chipset revision 165 NFORCE3-150: not 100% native mode: will probe irqs later NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hdb: QSI CD-RW/DVD-ROM SBW242B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: IC25N040ATMR04-0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 1024KiB hdc: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100) hdc: cache flushes supported /dev/ide/host0/bus1/target0/lun0: p1 p2 p3 < p5 > p4 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... Stopping tasks: ===| Freeing memory... -\|/done (520 pages freed) Restarting tasks... done kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Adding 473876k swap on /dev/hdc5. Priority:-1 extents:1 EXT3 FS on hdc2, internal journal hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). mice: PS/2 mouse device common for all mice Synaptics Touchpad, model: 1 Firmware: 5.9 180 degree mounted touchpad Sensor: 18 new absolute packet format Touchpad has extended capability bits -> four buttons -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 Real Time Clock Driver v1.12 ieee1394: Initialized config rom entry `ip1394' SCSI subsystem initialized sbp2: $Rev: 1219 $ Ben Collins ts: Compaq touchscreen protocol output Capability LSM initialized device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on hdc4, internal journal EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker irda_init() NET: Registered protocol family 23 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:02.0: nVidia Corporation nForce3 USB 1.1 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 11, pci mem 0xfebfb000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:02.1: nVidia Corporation nForce3 USB 1.1 (#2) PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: irq 5, pci mem 0xfebfc000 ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected usb 1-2: new low speed USB device using ohci_hcd and address 2 ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:02.2: nVidia Corporation nForce3 USB 2.0 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: irq 10, pci mem 0xfebfdc00 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: park 0 ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 usb 1-2: USB disconnect, address 2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver usb 1-2: new low speed USB device using ohci_hcd and address 3 input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-2 ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0_measure_ac97_clock: measured 49417 usecs intel8x0: clocking to 47440 libata version 1.10 loaded. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11 eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 9 (level, low) -> IRQ 9 Yenta: CardBus bridge found at 0000:02:01.0 [1043:1854] Yenta: ISA IRQ mask 0x0018, PCI irq 9 Socket status: 30000006 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI interrupt 0000:02:01.1[B] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:01.1 [1043:1854] Yenta: ISA IRQ mask 0x0018, PCI irq 11 Socket status: 30000006 ohci1394: $Rev: 1223 $ Ben Collins ACPI: PCI interrupt 0000:02:01.2[C] -> GSI 11 (level, low) -> IRQ 11 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[feafd000-feafd7ff] Max Packet=[2048] NET: Registered protocol family 17 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800031dff36] eth0: network connection up using port A speed: 10 autonegotiation: yes duplex mode: full flowctrl: none irq moderation: disabled scatter-gather: enabled NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff80386500(lo) IPv6 over IPv4 tunneling driver Asus Laptop ACPI Extras version 0.29 L5D model detected, supported ACPI: AC Adapter [AC0] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ibm_acpi: ec object not found ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e) powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x2 (1500 mV) powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6 (1400 mV) powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 (1100 mV) cpu_init done, current fid 0xa, vid 0x2 eth0: no IPv6 routers present \nlspci -v:\n 0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4) Subsystem: Asustek Computer, Inc.: Unknown device 80c5 Flags: bus master, 66MHz, fast devsel, latency 0 Memory at e8000000 (32-bit, prefetchable) [size=128M] Capabilities: 0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev f6) Subsystem: Asustek Computer, Inc.: Unknown device 80c5 Flags: bus master, 66MHz, fast devsel, latency 0 0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4) Subsystem: Asustek Computer, Inc.: Unknown device 80c5 Flags: 66MHz, fast devsel I/O ports at 5000 [size=64] I/O ports at 5040 [size=64] Capabilities: 0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 1858 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11 Memory at febfb000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 1858 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5 Memory at febfc000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2) (prog-if 20 [EHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 1859 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10 Memory at febfdc00 (32-bit, non-prefetchable) [size=256] Capabilities: 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2) Subsystem: Asustek Computer, Inc.: Unknown device 1853 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5 I/O ports at e400 [size=256] I/O ports at e080 [size=128] Memory at febfe000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:00:06.1 Modem: nVidia Corporation: Unknown device 00d9 (rev a2) (prog-if 00 [Generic]) Subsystem: Asustek Computer, Inc.: Unknown device 1856 Flags: 66MHz, fast devsel, IRQ 10 I/O ports at e800 [size=256] I/O ports at ec00 [size=128] Memory at febff000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) (prog-if 8a [Master SecP PriP]) Subsystem: Asustek Computer, Inc.: Unknown device 185a Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at ffa0 [size=16] Capabilities: 0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=04, sec-latency=128 I/O behind bridge: 0000b000-0000dfff Memory behind bridge: f8a00000-feafffff 0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: f6900000-f89fffff Prefetchable memory behind bridge: c6800000-e67fffff 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel Capabilities: 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 031b (rev a1) (prog-if 00 [VGA]) Subsystem: Asustek Computer, Inc.: Unknown device 1852 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11 Memory at f7000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (32-bit, prefetchable) [size=256M] Expansion ROM at f89e0000 [disabled] [size=128K] Capabilities: 0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13) Subsystem: Asustek Computer, Inc.: Unknown device 173c Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11 Memory at feaf8000 (32-bit, non-prefetchable) [size=16K] I/O ports at d800 [size=256] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: 0000:02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ab) Subsystem: Asustek Computer, Inc.: Unknown device 1854 Flags: bus master, medium devsel, latency 168, IRQ 9 Memory at fd200000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: fba00000-fc5ff000 (prefetchable) Memory window 1: fc600000-fd1ff000 I/O window 0: 0000c000-0000c7ff I/O window 1: 0000c800-0000cfff 16-bit legacy interface ports at 0001 0000:02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ab) Subsystem: Asustek Computer, Inc.: Unknown device 1854 Flags: bus master, medium devsel, latency 168, IRQ 11 Memory at fa200000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: f8a00000-f95ff000 (prefetchable) Memory window 1: f9600000-fa1ff000 I/O window 0: 0000b000-0000b7ff I/O window 1: 0000b800-0000bfff 16-bit legacy interface ports at 0001 0000:02:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 1857 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at feafd000 (32-bit, non-prefetchable) [size=2K] Capabilities: 0000:02:01.3 System peripheral: Ricoh Co Ltd: Unknown device 0576 (rev 01) Subsystem: Asustek Computer, Inc.: Unknown device 185b Flags: medium devsel, IRQ 5 Memory at feafd800 (32-bit, non-prefetchable) [size=256] Capabilities: 0000:02:01.4 System peripheral: Ricoh Co Ltd: Unknown device 0592 Subsystem: Asustek Computer, Inc.: Unknown device 185c Flags: medium devsel, IRQ 5 Memory at feafdc00 (32-bit, non-prefetchable) [size=256] Capabilities: 0000:02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) Subsystem: Asustek Computer, Inc.: Unknown device 120f Flags: bus master, fast devsel, latency 64, IRQ 11 Memory at feafe000 (32-bit, non-prefetchable) [size=8K] Capabilities: \nlsusb:\n Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 003: ID 046d:c016 Logitech, Inc. Optical Mouse Bus 001 Device 001: ID 0000:0000