[ 0.000000] microcode: microcode updated early to revision 0xf4, date = 2023-02-23 [ 0.000000] Linux version 6.2.0-34-generic (buildd@bos03-amd64-059) (x86_64-linux-gnu-gcc-11 (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #34~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Thu Sep 7 13:12:03 UTC 2 (Ubuntu 6.2.0-34.34~22.04.1-generic 6.2.16) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.2.0-34-generic root=UUID=37886c72-4f83-46a5-9b26-f60df27504e2 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a907afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a907b000-0x00000000a907bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a907c000-0x00000000a907cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a907d000-0x00000000b8ac9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b8aca000-0x00000000ba273fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ba274000-0x00000000ba2bafff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ba2bb000-0x00000000bac1cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bac1d000-0x00000000bb5fefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bb5ff000-0x00000000bb5fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bb600000-0x00000000bf7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xa27db018-0xa27eb057] usable ==> usable [ 0.000000] e820: update [mem 0xa27db018-0xa27eb057] usable ==> usable [ 0.000000] e820: update [mem 0xa27cc018-0xa27da057] usable ==> usable [ 0.000000] e820: update [mem 0xa27cc018-0xa27da057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a27cc017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a27cc018-0x00000000a27da057] usable [ 0.000000] reserve setup_data: [mem 0x00000000a27da058-0x00000000a27db017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a27db018-0x00000000a27eb057] usable [ 0.000000] reserve setup_data: [mem 0x00000000a27eb058-0x00000000a907afff] usable [ 0.000000] reserve setup_data: [mem 0x00000000a907b000-0x00000000a907bfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000a907c000-0x00000000a907cfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000a907d000-0x00000000b8ac9fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b8aca000-0x00000000ba273fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ba274000-0x00000000ba2bafff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000ba2bb000-0x00000000bac1cfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000bac1d000-0x00000000bb5fefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bb5ff000-0x00000000bb5fffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bb600000-0x00000000bf7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000043f7fffff] usable [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0xba282000 ACPI 2.0=0xba282000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0xbabbe000 ESRT=0xbb0ca698 MEMATTR=0xb4ee8018 MOKvar=0xbb29d000 RNG=0xba281018 TPMEventLog=0xa916b018 [ 0.000000] random: crng init done [ 0.000000] efi: Remove mem39: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map [ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved [ 0.000000] efi: Not removing mem40: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map [ 0.000000] efi: Not removing mem41: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem42: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem43: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.1.1 present. [ 0.000000] DMI: Dell Inc. Latitude 3590/09GV6M, BIOS 1.26.0 06/13/2023 [ 0.000000] tsc: Detected 1800.000 MHz processor [ 0.000768] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000770] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000778] last_pfn = 0x43f800 max_arch_pfn = 0x400000000 [ 0.000783] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001151] last_pfn = 0xbb600 max_arch_pfn = 0x400000000 [ 0.007823] esrt: Reserving ESRT space from 0x00000000bb0ca698 to 0x00000000bb0ca6d0. [ 0.007830] Using GB pages for direct mapping [ 0.008010] secureboot: Secure boot disabled [ 0.008011] RAMDISK: [mem 0xa27ec000-0xa6a3efff] [ 0.008016] ACPI: Early table checksum verification disabled [ 0.008019] ACPI: RSDP 0x00000000BA282000 000024 (v02 DELL ) [ 0.008022] ACPI: XSDT 0x00000000BA2820B8 0000EC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.008027] ACPI: FACP 0x00000000BA2ACC28 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.008032] ACPI: DSDT 0x00000000BA282230 02A9F4 (v02 DELL CBX3 01072009 INTL 20160422) [ 0.008035] ACPI: FACS 0x00000000BAC1A180 000040 [ 0.008038] ACPI: APIC 0x00000000BA2ACD38 0000BC (v03 DELL CBX3 01072009 AMI 00010013) [ 0.008040] ACPI: FPDT 0x00000000BA2ACDF8 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.008043] ACPI: FIDT 0x00000000BA2ACE40 0000AC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.008045] ACPI: MCFG 0x00000000BA2ACEF0 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.008048] ACPI: HPET 0x00000000BA2ACF30 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.008051] ACPI: SSDT 0x00000000BA2ACF68 0004B8 (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.008053] ACPI: BOOT 0x00000000BA2AD420 000028 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.008056] ACPI: SSDT 0x00000000BA2AD448 0012E0 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.008059] ACPI: HPET 0x00000000BA2AE728 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F) [ 0.008061] ACPI: SSDT 0x00000000BA2AE760 00079D (v02 INTEL xh_OEMBD 00000000 INTL 20160422) [ 0.008064] ACPI: UEFI 0x00000000BA2AEF00 000042 (v01 00000000 00000000) [ 0.008066] ACPI: SSDT 0x00000000BA2AEF48 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.008069] ACPI: LPIT 0x00000000BA2B06F8 00005C (v01 INTEL KBL-ULT 00000000 MSFT 0000005F) [ 0.008072] ACPI: SSDT 0x00000000BA2B0758 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422) [ 0.008074] ACPI: SSDT 0x00000000BA2B08A0 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.008077] ACPI: SSDT 0x00000000BA2B0B40 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.008080] ACPI: SSDT 0x00000000BA2B3B48 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422) [ 0.008082] ACPI: DBGP 0x00000000BA2B4060 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.008085] ACPI: DBG2 0x00000000BA2B4098 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.008087] ACPI: SSDT 0x00000000BA2B40F0 0007AC (v02 INTEL UsbCTabl 00001000 INTL 20160422) [ 0.008090] ACPI: SSDT 0x00000000BA2B48A0 0049B3 (v02 DptfTa DptfTabl 00001000 INTL 20160422) [ 0.008093] ACPI: TPM2 0x00000000BA2B9258 000034 (v03 DELL CBX3 00000001 AMI 00000000) [ 0.008095] ACPI: DMAR 0x00000000BA2B9290 0000CC (v01 INTEL EDK2 00000001 INTL 00000001) [ 0.008098] ACPI: BGRT 0x00000000BA2B9360 000038 (v00 01072009 AMI 00010013) [ 0.008100] ACPI: Reserving FACP table memory at [mem 0xba2acc28-0xba2acd33] [ 0.008101] ACPI: Reserving DSDT table memory at [mem 0xba282230-0xba2acc23] [ 0.008102] ACPI: Reserving FACS table memory at [mem 0xbac1a180-0xbac1a1bf] [ 0.008103] ACPI: Reserving APIC table memory at [mem 0xba2acd38-0xba2acdf3] [ 0.008103] ACPI: Reserving FPDT table memory at [mem 0xba2acdf8-0xba2ace3b] [ 0.008104] ACPI: Reserving FIDT table memory at [mem 0xba2ace40-0xba2aceeb] [ 0.008105] ACPI: Reserving MCFG table memory at [mem 0xba2acef0-0xba2acf2b] [ 0.008106] ACPI: Reserving HPET table memory at [mem 0xba2acf30-0xba2acf67] [ 0.008106] ACPI: Reserving SSDT table memory at [mem 0xba2acf68-0xba2ad41f] [ 0.008107] ACPI: Reserving BOOT table memory at [mem 0xba2ad420-0xba2ad447] [ 0.008108] ACPI: Reserving SSDT table memory at [mem 0xba2ad448-0xba2ae727] [ 0.008108] ACPI: Reserving HPET table memory at [mem 0xba2ae728-0xba2ae75f] [ 0.008109] ACPI: Reserving SSDT table memory at [mem 0xba2ae760-0xba2aeefc] [ 0.008110] ACPI: Reserving UEFI table memory at [mem 0xba2aef00-0xba2aef41] [ 0.008110] ACPI: Reserving SSDT table memory at [mem 0xba2aef48-0xba2b06f5] [ 0.008111] ACPI: Reserving LPIT table memory at [mem 0xba2b06f8-0xba2b0753] [ 0.008112] ACPI: Reserving SSDT table memory at [mem 0xba2b0758-0xba2b0898] [ 0.008112] ACPI: Reserving SSDT table memory at [mem 0xba2b08a0-0xba2b0b3e] [ 0.008113] ACPI: Reserving SSDT table memory at [mem 0xba2b0b40-0xba2b3b41] [ 0.008114] ACPI: Reserving SSDT table memory at [mem 0xba2b3b48-0xba2b405e] [ 0.008115] ACPI: Reserving DBGP table memory at [mem 0xba2b4060-0xba2b4093] [ 0.008115] ACPI: Reserving DBG2 table memory at [mem 0xba2b4098-0xba2b40eb] [ 0.008116] ACPI: Reserving SSDT table memory at [mem 0xba2b40f0-0xba2b489b] [ 0.008117] ACPI: Reserving SSDT table memory at [mem 0xba2b48a0-0xba2b9252] [ 0.008117] ACPI: Reserving TPM2 table memory at [mem 0xba2b9258-0xba2b928b] [ 0.008118] ACPI: Reserving DMAR table memory at [mem 0xba2b9290-0xba2b935b] [ 0.008119] ACPI: Reserving BGRT table memory at [mem 0xba2b9360-0xba2b9397] [ 0.008301] No NUMA configuration found [ 0.008302] Faking a node at [mem 0x0000000000000000-0x000000043f7fffff] [ 0.008317] NODE_DATA(0) allocated [mem 0xb4ebc000-0xb4ee6fff] [ 0.008497] Zone ranges: [ 0.008498] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.008499] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.008501] Normal [mem 0x0000000100000000-0x000000043f7fffff] [ 0.008502] Device empty [ 0.008503] Movable zone start for each node [ 0.008505] Early memory node ranges [ 0.008505] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.008507] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.008507] node 0: [mem 0x0000000000100000-0x00000000a907afff] [ 0.008509] node 0: [mem 0x00000000a907d000-0x00000000b8ac9fff] [ 0.008509] node 0: [mem 0x00000000bb5ff000-0x00000000bb5fffff] [ 0.008510] node 0: [mem 0x0000000100000000-0x000000043f7fffff] [ 0.008512] Initmem setup node 0 [mem 0x0000000000001000-0x000000043f7fffff] [ 0.008516] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008517] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008543] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.017954] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.018105] On node 0, zone DMA32: 11061 pages in unavailable ranges [ 0.062432] On node 0, zone Normal: 18944 pages in unavailable ranges [ 0.062460] On node 0, zone Normal: 2048 pages in unavailable ranges [ 0.062469] Reserving Intel graphics memory at [mem 0xbd800000-0xbf7fffff] [ 0.063064] ACPI: PM-Timer IO Port: 0x1808 [ 0.063070] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.063071] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.063072] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.063073] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.063073] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.063074] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.063075] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.063075] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.063101] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.063104] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.063105] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.063109] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.063110] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.063115] e820: update [mem 0xb501c000-0xb5060fff] usable ==> reserved [ 0.063126] TSC deadline timer available [ 0.063127] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.063143] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.063145] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.063147] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.063148] PM: hibernation: Registered nosave memory: [mem 0xa27cc000-0xa27ccfff] [ 0.063150] PM: hibernation: Registered nosave memory: [mem 0xa27da000-0xa27dafff] [ 0.063151] PM: hibernation: Registered nosave memory: [mem 0xa27db000-0xa27dbfff] [ 0.063152] PM: hibernation: Registered nosave memory: [mem 0xa27eb000-0xa27ebfff] [ 0.063154] PM: hibernation: Registered nosave memory: [mem 0xa907b000-0xa907bfff] [ 0.063154] PM: hibernation: Registered nosave memory: [mem 0xa907c000-0xa907cfff] [ 0.063156] PM: hibernation: Registered nosave memory: [mem 0xb501c000-0xb5060fff] [ 0.063158] PM: hibernation: Registered nosave memory: [mem 0xb8aca000-0xba273fff] [ 0.063158] PM: hibernation: Registered nosave memory: [mem 0xba274000-0xba2bafff] [ 0.063159] PM: hibernation: Registered nosave memory: [mem 0xba2bb000-0xbac1cfff] [ 0.063160] PM: hibernation: Registered nosave memory: [mem 0xbac1d000-0xbb5fefff] [ 0.063161] PM: hibernation: Registered nosave memory: [mem 0xbb600000-0xbf7fffff] [ 0.063162] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfdffffff] [ 0.063163] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.063163] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.063164] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.063165] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.063165] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.063166] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [ 0.063167] [mem 0xbf800000-0xfdffffff] available for PCI devices [ 0.063168] Booting paravirtualized kernel on bare hardware [ 0.063170] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.063177] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.063959] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144 [ 0.063965] pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152 [ 0.063967] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.063995] Fallback order for Node 0: 0 [ 0.063997] Built 1 zonelists, mobility grouping on. Total pages: 4096957 [ 0.063998] Policy zone: Normal [ 0.063999] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.2.0-34-generic root=UUID=37886c72-4f83-46a5-9b26-f60df27504e2 ro quiet splash vt.handoff=7 [ 0.064076] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.2.0-34-generic", will be passed to user space. [ 0.067476] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.069171] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.069276] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.069285] software IO TLB: area num 8. [ 0.155484] Memory: 2505280K/16648596K available (20480K kernel code, 4152K rwdata, 12720K rodata, 4764K init, 17540K bss, 14143056K reserved, 0K cma-reserved) [ 0.155605] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.155616] Kernel/User page tables isolation: enabled [ 0.155653] ftrace: allocating 53421 entries in 209 pages [ 0.164848] ftrace: allocated 209 pages with 4 groups [ 0.165527] Dynamic Preempt: voluntary [ 0.165557] rcu: Preemptible hierarchical RCU implementation. [ 0.165558] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.165559] Trampoline variant of Tasks RCU enabled. [ 0.165560] Rude variant of Tasks RCU enabled. [ 0.165560] Tracing variant of Tasks RCU enabled. [ 0.165561] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.165562] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.168162] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.168381] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.168561] spurious 8259A interrupt: IRQ7. [ 0.168588] Console: colour dummy device 80x25 [ 0.168591] printk: console [tty0] enabled [ 0.168632] ACPI: Core revision 20221020 [ 0.168782] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.168784] APIC: Switch to symmetric I/O mode setup [ 0.168786] DMAR: Host address width 39 [ 0.168787] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.168793] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.168796] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.168800] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.168801] DMAR: RMRR base: 0x000000b9f9f000 end: 0x000000b9fbefff [ 0.168803] DMAR: RMRR base: 0x000000bd000000 end: 0x000000bf7fffff [ 0.168804] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.168806] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.168807] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.168808] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.170885] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.170887] x2apic enabled [ 0.170899] Switched APIC routing to cluster x2apic. [ 0.174760] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns [ 0.174767] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=7200000) [ 0.174792] x86/cpu: SGX disabled by BIOS. [ 0.174800] CPU0: Thermal monitoring enabled (TM1) [ 0.174842] process: using mwait in idle threads [ 0.174845] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.174846] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.174851] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.174853] Spectre V2 : Mitigation: IBRS [ 0.174854] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.174854] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.174855] RETBleed: Mitigation: IBRS [ 0.174857] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.174858] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.174859] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.174865] MDS: Mitigation: Clear CPU buffers [ 0.174866] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.174870] SRBDS: Mitigation: Microcode [ 0.174876] GDS: Mitigation: Microcode [ 0.174883] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.174884] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.174885] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.174886] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.174888] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.174889] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.174891] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.174892] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.174894] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.178763] Freeing SMP alternatives memory: 44K [ 0.178763] pid_max: default: 32768 minimum: 301 [ 0.178763] efi: memattr: Failed to map EFI Memory Attributes table @ 0xb4ee8018 [ 0.178763] LSM: initializing lsm=lockdown,capability,landlock,yama,integrity,apparmor [ 0.178763] landlock: Up and running. [ 0.178763] Yama: becoming mindful. [ 0.178763] AppArmor: AppArmor initialized [ 0.178763] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.178763] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.178763] smpboot: CPU0: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xa) [ 0.178763] cblist_init_generic: Setting adjustable number of callback queues. [ 0.178763] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.178763] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.178763] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.178763] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.178763] ... version: 4 [ 0.178763] ... bit width: 48 [ 0.178763] ... generic registers: 4 [ 0.178763] ... value mask: 0000ffffffffffff [ 0.178763] ... max period: 00007fffffffffff [ 0.178763] ... fixed-purpose events: 3 [ 0.178763] ... event mask: 000000070000000f [ 0.178763] signal: max sigframe size: 2032 [ 0.178763] Estimated ratio of average max frequency by base frequency (times 1024): 1934 [ 0.178763] rcu: Hierarchical SRCU implementation. [ 0.178763] rcu: Max phase no-delay instances is 1000. [ 0.178763] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.178763] smp: Bringing up secondary CPUs ... [ 0.178763] x86: Booting SMP configuration: [ 0.178763] .... node #0, CPUs: #1 #2 #3 #4 [ 0.183292] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.183292] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.183292] #5 #6 #7 [ 0.183292] smp: Brought up 1 node, 8 CPUs [ 0.183292] smpboot: Max logical packages: 1 [ 0.183292] smpboot: Total of 8 processors activated (28800.00 BogoMIPS) [ 0.187347] devtmpfs: initialized [ 0.187347] x86/mm: Memory block size: 128MB [ 0.188134] ACPI: PM: Registering ACPI NVS region [mem 0xa907b000-0xa907bfff] (4096 bytes) [ 0.188134] ACPI: PM: Registering ACPI NVS region [mem 0xba2bb000-0xbac1cfff] (9838592 bytes) [ 0.188134] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.188134] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.188134] pinctrl core: initialized pinctrl subsystem [ 0.188134] PM: RTC time: 12:23:59, date: 2023-10-16 [ 0.188134] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.188134] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.188134] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.188134] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.188134] audit: initializing netlink subsys (disabled) [ 0.188134] audit: type=2000 audit(1697459039.012:1): state=initialized audit_enabled=0 res=1 [ 0.188134] thermal_sys: Registered thermal governor 'fair_share' [ 0.188134] thermal_sys: Registered thermal governor 'bang_bang' [ 0.188134] thermal_sys: Registered thermal governor 'step_wise' [ 0.188134] thermal_sys: Registered thermal governor 'user_space' [ 0.188134] thermal_sys: Registered thermal governor 'power_allocator' [ 0.188134] EISA bus registered [ 0.188134] cpuidle: using governor ladder [ 0.188134] cpuidle: using governor menu [ 0.188134] Simple Boot Flag at 0x47 set to 0x80 [ 0.188134] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.188134] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.188134] PCI: not using MMCONFIG [ 0.188134] PCI: Using configuration type 1 for base access [ 0.191029] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.191036] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.191036] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.191036] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.191036] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.191036] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.191036] fbcon: Taking over console [ 0.191036] ACPI: Added _OSI(Module Device) [ 0.191036] ACPI: Added _OSI(Processor Device) [ 0.191036] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.191036] ACPI: Added _OSI(Processor Aggregator Device) [ 0.244149] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.244516] ACPI Error: No pointer back to namespace node in package (____ptrval____) (20221020/dsargs-301) [ 0.245124] ACPI Error: No pointer back to namespace node in package (____ptrval____) (20221020/dsargs-301) [ 0.250967] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.258132] ACPI: Dynamic OEM Table Load: [ 0.258140] ACPI: SSDT 0xFFFF8A79C1F02000 00058B (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.259211] ACPI Error: No pointer back to namespace node in package (____ptrval____) (20221020/dsargs-301) [ 0.259707] ACPI Error: No pointer back to namespace node in package (____ptrval____) (20221020/dsargs-301) [ 0.260334] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked [ 0.261666] ACPI: Dynamic OEM Table Load: [ 0.261672] ACPI: SSDT 0xFFFF8A79C1EF6000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.262042] ACPI Error: No pointer back to namespace node in package (____ptrval____) (20221020/dsargs-301) [ 0.263048] ACPI Error: No pointer back to namespace node in package (____ptrval____) (20221020/dsargs-301) [ 0.264301] ACPI: Dynamic OEM Table Load: [ 0.264308] ACPI: SSDT 0xFFFF8A79C1EFC000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.265584] ACPI Error: No pointer back to namespace node in package (____ptrval____) (20221020/dsargs-301) [ 0.266076] ACPI Error: No pointer back to namespace node in package (____ptrval____) (20221020/dsargs-301) [ 0.267343] ACPI: Dynamic OEM Table Load: [ 0.267349] ACPI: SSDT 0xFFFF8A79C1EF3800 000317 (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.267744] ACPI Error: No pointer back to namespace node in package (____ptrval____) (20221020/dsargs-301) [ 0.268239] ACPI Error: No pointer back to namespace node in package (____ptrval____) (20221020/dsargs-301) [ 0.268977] ACPI: Dynamic OEM Table Load: [ 0.268983] ACPI: SSDT 0xFFFF8A79C1EF6C00 00030A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.269384] ACPI Error: No pointer back to namespace node in package (____ptrval____) (20221020/dsargs-301) [ 0.269874] ACPI Error: No pointer back to namespace node in package (____ptrval____) (20221020/dsargs-301) [ 0.274821] ACPI: EC: EC started [ 0.274823] ACPI: EC: interrupt blocked [ 0.284611] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.284617] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions [ 0.284622] ACPI: Interpreter enabled [ 0.284667] ACPI: PM: (supports S0 S3 S4 S5) [ 0.284668] ACPI: Using IOAPIC for interrupt routing [ 0.287287] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.288529] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.288544] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.288546] PCI: Ignoring E820 reservations for host bridge windows [ 0.289373] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.329784] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.329792] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.332386] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] [ 0.333459] PCI host bridge to bus 0000:00 [ 0.333461] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.333463] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.333465] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.333467] pci_bus 0000:00: root bus resource [mem 0xbf800000-0xdfffffff window] [ 0.333468] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.333470] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.333490] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000 [ 0.333568] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000 [ 0.333577] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit] [ 0.333583] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.333588] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.333603] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.333607] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.333812] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.333822] pci 0000:00:04.0: reg 0x10: [mem 0xdf420000-0xdf427fff 64bit] [ 0.334170] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.334189] pci 0000:00:14.0: reg 0x10: [mem 0xdf410000-0xdf41ffff 64bit] [ 0.334769] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.335513] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.335531] pci 0000:00:14.2: reg 0x10: [mem 0xdf437000-0xdf437fff 64bit] [ 0.335762] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.335932] pci 0000:00:15.0: reg 0x10: [mem 0xdf436000-0xdf436fff 64bit] [ 0.336936] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.336958] pci 0000:00:16.0: reg 0x10: [mem 0xdf435000-0xdf435fff 64bit] [ 0.337019] pci 0000:00:16.0: PME# supported from D3hot [ 0.337438] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.337454] pci 0000:00:17.0: reg 0x10: [mem 0xdf430000-0xdf431fff] [ 0.337463] pci 0000:00:17.0: reg 0x14: [mem 0xdf434000-0xdf4340ff] [ 0.337472] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.337481] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.337489] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.337498] pci 0000:00:17.0: reg 0x24: [mem 0xdf433000-0xdf4337ff] [ 0.337539] pci 0000:00:17.0: PME# supported from D3hot [ 0.337869] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400 [ 0.337945] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.339121] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 [ 0.339200] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.339859] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 [ 0.339945] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.340617] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 [ 0.340967] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.340981] pci 0000:00:1f.2: reg 0x10: [mem 0xdf42c000-0xdf42ffff] [ 0.341282] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300 [ 0.341304] pci 0000:00:1f.3: reg 0x10: [mem 0xdf428000-0xdf42bfff 64bit] [ 0.341329] pci 0000:00:1f.3: reg 0x20: [mem 0xdf400000-0xdf40ffff 64bit] [ 0.341375] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.342201] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.342769] pci 0000:00:1f.4: reg 0x10: [mem 0xdf432000-0xdf4320ff 64bit] [ 0.342840] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.343262] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.343283] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.343310] pci 0000:01:00.0: reg 0x18: [mem 0xdf304000-0xdf304fff 64bit] [ 0.343328] pci 0000:01:00.0: reg 0x20: [mem 0xdf300000-0xdf303fff 64bit] [ 0.343436] pci 0000:01:00.0: supports D1 D2 [ 0.343437] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.343657] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.343660] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.343663] pci 0000:00:1c.0: bridge window [mem 0xdf300000-0xdf3fffff] [ 0.343937] pci 0000:02:00.0: [168c:003e] type 00 class 0x028000 [ 0.343980] pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdf1fffff 64bit] [ 0.344215] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.344821] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.344826] pci 0000:00:1c.5: bridge window [mem 0xdf000000-0xdf1fffff] [ 0.345210] pci 0000:03:00.0: [2646:500f] type 00 class 0x010802 [ 0.345236] pci 0000:03:00.0: reg 0x10: [mem 0xdf200000-0xdf203fff 64bit] [ 0.345610] pci 0000:00:1d.0: PCI bridge to [bus 03] [ 0.345614] pci 0000:00:1d.0: bridge window [mem 0xdf200000-0xdf2fffff] [ 0.348666] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.348735] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.348803] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.348870] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.348937] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.349004] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.349071] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.349138] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.355502] ACPI: EC: interrupt unblocked [ 0.355504] ACPI: EC: event unblocked [ 0.355511] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.355512] ACPI: EC: GPE=0x6e [ 0.355514] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete [ 0.355516] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events [ 0.355585] iommu: Default domain type: Translated [ 0.355585] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.355585] SCSI subsystem initialized [ 0.355585] libata version 3.00 loaded. [ 0.355585] ACPI: bus type USB registered [ 0.355585] usbcore: registered new interface driver usbfs [ 0.355585] usbcore: registered new interface driver hub [ 0.355585] usbcore: registered new device driver usb [ 0.355585] pps_core: LinuxPPS API ver. 1 registered [ 0.355585] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.355585] PTP clock support registered [ 0.355585] EDAC MC: Ver: 3.0.0 [ 0.355585] Registered efivars operations [ 0.359101] NetLabel: Initializing [ 0.359106] NetLabel: domain hash size = 128 [ 0.359107] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.359125] NetLabel: unlabeled traffic allowed by default [ 0.359141] mctp: management component transport protocol core [ 0.359141] NET: Registered PF_MCTP protocol family [ 0.359141] PCI: Using ACPI for IRQ routing [ 0.392851] PCI: pci_cache_line_size set to 64 bytes [ 0.393520] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.393523] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.393524] e820: reserve RAM buffer [mem 0xa27cc018-0xa3ffffff] [ 0.393525] e820: reserve RAM buffer [mem 0xa27db018-0xa3ffffff] [ 0.393526] e820: reserve RAM buffer [mem 0xa907b000-0xabffffff] [ 0.393527] e820: reserve RAM buffer [mem 0xb501c000-0xb7ffffff] [ 0.393528] e820: reserve RAM buffer [mem 0xb8aca000-0xbbffffff] [ 0.393530] e820: reserve RAM buffer [mem 0xbb600000-0xbbffffff] [ 0.393531] e820: reserve RAM buffer [mem 0x43f800000-0x43fffffff] [ 0.393582] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.393582] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.393582] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.393582] vgaarb: loaded [ 0.395312] clocksource: Switched to clocksource tsc-early [ 0.395429] VFS: Disk quotas dquot_6.6.0 [ 0.395442] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.395556] AppArmor: AppArmor Filesystem Enabled [ 0.395586] pnp: PnP ACPI init [ 0.395860] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.395864] system 00:00: [io 0xffff] has been reserved [ 0.395866] system 00:00: [io 0xffff] has been reserved [ 0.395868] system 00:00: [io 0xffff] has been reserved [ 0.395869] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.395871] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.396021] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.396872] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.396875] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.396877] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.396879] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.396880] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.396883] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.396885] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.396886] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.396888] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.396890] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.396944] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.396946] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.396948] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.396949] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.396951] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.396952] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.396954] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.397271] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.398065] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.398068] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.403348] pnp: PnP ACPI: found 9 devices [ 0.408999] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.409062] NET: Registered PF_INET protocol family [ 0.409271] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.411861] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.411895] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.411998] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.412308] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.412502] TCP: Hash tables configured (established 131072 bind 65536) [ 0.412613] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.412665] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.412710] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.412762] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.412768] NET: Registered PF_XDP protocol family [ 0.412786] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.412790] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.412794] pci 0000:00:1c.0: bridge window [mem 0xdf300000-0xdf3fffff] [ 0.412801] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.412804] pci 0000:00:1c.5: bridge window [mem 0xdf000000-0xdf1fffff] [ 0.412810] pci 0000:00:1d.0: PCI bridge to [bus 03] [ 0.412814] pci 0000:00:1d.0: bridge window [mem 0xdf200000-0xdf2fffff] [ 0.412821] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.412822] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.412824] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window] [ 0.412825] pci_bus 0000:00: resource 7 [mem 0xbf800000-0xdfffffff window] [ 0.412827] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.412828] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.412830] pci_bus 0000:01: resource 1 [mem 0xdf300000-0xdf3fffff] [ 0.412831] pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf1fffff] [ 0.412833] pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf2fffff] [ 0.413548] PCI: CLS 0 bytes, default 64 [ 0.413562] DMAR: ACPI device "device:6c" under DMAR at fed91000 as 00:15.0 [ 0.413575] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.413576] software IO TLB: mapped [mem 0x00000000af400000-0x00000000b3400000] (64MB) [ 0.413613] Trying to unpack rootfs image as initramfs... [ 0.414356] Initialise system trusted keyrings [ 0.414367] Key type blacklist registered [ 0.414422] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.414442] zbud: loaded [ 0.414643] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.414732] fuse: init (API version 7.38) [ 0.414853] integrity: Platform Keyring initialized [ 0.414857] integrity: Machine keyring initialized [ 0.421523] Key type asymmetric registered [ 0.421526] Asymmetric key parser 'x509' registered [ 0.421547] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.421581] io scheduler mq-deadline registered [ 0.422023] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 0.422075] pcieport 0000:00:1c.0: AER: enabled with IRQ 122 [ 0.422318] pcieport 0000:00:1c.5: PME: Signaling with IRQ 123 [ 0.422522] pcieport 0000:00:1d.0: PME: Signaling with IRQ 124 [ 0.422572] pcieport 0000:00:1d.0: AER: enabled with IRQ 124 [ 0.422666] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.424408] ACPI: AC: AC Adapter [AC] (on-line) [ 0.424468] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.424508] ACPI: button: Lid Switch [LID0] [ 0.424534] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.424561] ACPI: button: Power Button [PBTN] [ 0.424585] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.424598] ACPI: button: Sleep Button [SBTN] [ 0.424623] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.424650] ACPI: button: Power Button [PWRF] [ 0.426925] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.426928] ACPI: thermal: Thermal Zone [THM] (25 C) [ 0.427274] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.429068] hpet_acpi_add: no address or irqs in _CRS [ 0.429090] Linux agpgart interface v0.103 [ 0.456407] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1) [ 0.464965] ACPI: battery: Slot [BAT0] (battery present) [ 0.488808] loop: module loaded [ 0.489054] tun: Universal TUN/TAP device driver, 1.6 [ 0.489081] PPP generic driver version 2.4.2 [ 0.489209] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.489463] i8042: Warning: Keylock active [ 0.490887] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.490891] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.491039] mousedev: PS/2 mouse device common for all mice [ 0.491426] rtc_cmos 00:01: RTC can wake from S4 [ 0.492313] rtc_cmos 00:01: registered as rtc0 [ 0.492482] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.492498] rtc_cmos 00:01: setting system clock to 2023-10-16T12:23:59 UTC (1697459039) [ 0.492619] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.492628] i2c_dev: i2c /dev entries driver [ 0.493075] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.493088] device-mapper: uevent: version 1.0.3 [ 0.493151] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.493173] platform eisa.0: Probing EISA bus 0 [ 0.493175] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.493176] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.493178] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.493179] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.493180] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.493181] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.493182] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.493183] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.493184] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.493185] platform eisa.0: EISA: Detected 0 cards [ 0.493189] intel_pstate: Intel P-state driver initializing [ 0.493545] intel_pstate: HWP enabled [ 0.493630] ledtrig-cpu: registered to indicate activity on CPUs [ 0.493653] efifb: probing for efifb [ 0.493670] efifb: showing boot graphics [ 0.494397] efifb: framebuffer at 0xc0000000, using 4128k, total 4128k [ 0.494399] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 0.494401] efifb: scrolling: redraw [ 0.494401] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.494517] Console: switching to colour frame buffer device 170x48 [ 0.495322] fb0: EFI VGA frame buffer device [ 0.495388] intel_pmc_core INT33A1:00: initialized [ 0.495463] drop_monitor: Initializing network drop monitor service [ 0.512490] NET: Registered PF_INET6 protocol family [ 0.750143] Freeing initrd memory: 67916K [ 0.757120] Segment Routing with IPv6 [ 0.757134] In-situ OAM (IOAM) with IPv6 [ 0.757166] NET: Registered PF_PACKET protocol family [ 0.757325] Key type dns_resolver registered [ 0.758191] microcode: Microcode Update Driver: v2.2. [ 0.758197] IPI shorthand broadcast: enabled [ 0.759639] sched_clock: Marking stable (752001528, 6254475)->(801053653, -42797650) [ 0.759966] registered taskstats version 1 [ 0.760599] Loading compiled-in X.509 certificates [ 0.761132] Loaded X.509 cert 'Build time autogenerated kernel key: c01453e968c8a99870d9b5f871d02538905937d9' [ 0.761579] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.762021] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.762022] blacklist: Loading compiled-in revocation X.509 certificates [ 0.762038] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.762054] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 0.762068] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 0.762080] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 0.762093] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 0.762108] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 0.762120] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 0.762133] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 0.762328] zswap: loaded using pool lzo/zbud [ 0.764272] Key type .fscrypt registered [ 0.764273] Key type fscrypt-provisioning registered [ 0.764472] Key type trusted registered [ 0.767713] Key type encrypted registered [ 0.767717] AppArmor: AppArmor sha1 policy hashing enabled [ 0.769155] integrity: Loading X.509 certificate: UEFI:db [ 0.769176] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' [ 0.769177] integrity: Loading X.509 certificate: UEFI:db [ 0.769195] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.769196] integrity: Loading X.509 certificate: UEFI:db [ 0.769211] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.770185] integrity: Revoking X.509 certificate: UEFI:dbx [ 0.770203] blacklist: Revoked X.509 cert 'Microsoft Windows PCA 2010: d14fa98a0708cef4241898e500fff3d6791d37bc' [ 0.770851] Loading compiled-in module X.509 certificates [ 0.771304] Loaded X.509 cert 'Build time autogenerated kernel key: c01453e968c8a99870d9b5f871d02538905937d9' [ 0.771306] ima: Allocated hash algorithm: sha1 [ 0.811742] ima: No architecture policies found [ 0.811768] evm: Initialising EVM extended attributes: [ 0.811769] evm: security.selinux [ 0.811771] evm: security.SMACK64 [ 0.811772] evm: security.SMACK64EXEC [ 0.811773] evm: security.SMACK64TRANSMUTE [ 0.811774] evm: security.SMACK64MMAP [ 0.811790] evm: security.apparmor [ 0.811791] evm: security.ima [ 0.811792] evm: security.capability [ 0.811794] evm: HMAC attrs: 0x1 [ 0.812410] PM: Magic number: 11:322:380 [ 0.812800] RAS: Correctable Errors collector initialized. [ 0.815318] Freeing unused decrypted memory: 2036K [ 0.816380] Freeing unused kernel image (initmem) memory: 4764K [ 0.834566] Write protecting the kernel read-only data: 34816k [ 0.835764] Freeing unused kernel image (rodata/data gap) memory: 1616K [ 0.887669] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.887670] x86/mm: Checking user space page tables [ 0.933449] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.933454] Run /init as init process [ 0.933455] with arguments: [ 0.933456] /init [ 0.933457] splash [ 0.933458] with environment: [ 0.933459] HOME=/ [ 0.933459] TERM=linux [ 0.933460] BOOT_IMAGE=/boot/vmlinuz-6.2.0-34-generic [ 1.031017] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found [ 1.051786] hid: raw HID events driver (C) Jiri Kosina [ 1.055439] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.055453] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.056533] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 1.057101] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.057108] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.057112] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.057126] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 1.057165] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02 [ 1.057170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.057172] usb usb1: Product: xHCI Host Controller [ 1.057174] usb usb1: Manufacturer: Linux 6.2.0-34-generic xhci-hcd [ 1.057176] usb usb1: SerialNumber: 0000:00:14.0 [ 1.057490] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 1.058081] ahci 0000:00:17.0: version 3.0 [ 1.059179] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 1.059202] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x1 impl SATA mode [ 1.059208] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 1.060616] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.060647] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.060699] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 [ 1.060759] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit] [ 1.061329] hub 1-0:1.0: USB hub found [ 1.061386] hub 1-0:1.0: 12 ports detected [ 1.062263] scsi host0: ahci [ 1.062808] scsi host1: ahci [ 1.062894] ata1: SATA max UDMA/133 abar m2048@0xdf433000 port 0xdf433100 irq 126 [ 1.062898] ata2: DUMMY [ 1.074402] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02 [ 1.074409] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.074416] usb usb2: Product: xHCI Host Controller [ 1.074418] usb usb2: Manufacturer: Linux 6.2.0-34-generic xhci-hcd [ 1.074421] usb usb2: SerialNumber: 0000:00:14.0 [ 1.074715] hub 2-0:1.0: USB hub found [ 1.074735] hub 2-0:1.0: 6 ports detected [ 1.078371] usb: port power management may be unreliable [ 1.085005] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 8c:ec:4b:2b:b8:7c, XID 541, IRQ 127 [ 1.085013] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 1.281813] i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration [ 1.281821] i2c i2c-0: 1/2 memory slots populated (from DMI) [ 1.326358] usb 1-2: new full-speed USB device number 2 using xhci_hcd [ 1.381582] ata1: SATA link down (SStatus 4 SControl 300) [ 1.426373] tsc: Refined TSC clocksource calibration: 1800.003 MHz [ 1.426390] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f22c73312, max_idle_ns: 440795259572 ns [ 1.427477] clocksource: Switched to clocksource tsc [ 1.442735] nvme nvme0: pci function 0000:03:00.0 [ 1.444489] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 1.453411] input: DELL083A:00 044E:120A Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL083A:00/0018:044E:120A.0001/input/input7 [ 1.453675] input: DELL083A:00 044E:120A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL083A:00/0018:044E:120A.0001/input/input8 [ 1.453887] input: DELL083A:00 044E:120A as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL083A:00/0018:044E:120A.0001/input/input9 [ 1.454060] hid-generic 0018:044E:120A.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL083A:00 044E:120A] on i2c-DELL083A:00 [ 1.464352] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.478543] nvme nvme0: 8/0/0 default/read/poll queues [ 1.481042] usb 1-2: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00 [ 1.481057] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.481065] usb 1-2: Product: USB Receiver [ 1.481069] usb 1-2: Manufacturer: Logitech [ 1.487185] nvme0n1: p1 p2 [ 1.614395] usb 1-5: new high-speed USB device number 3 using xhci_hcd [ 1.775798] usb 1-5: New USB device found, idVendor=1bcf, idProduct=28c0, bcdDevice=65.05 [ 1.775813] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.775820] usb 1-5: Product: Integrated_Webcam_HD [ 1.775825] usb 1-5: Manufacturer: CN0F08KGLOG00818D0FYA02 [ 1.906341] usb 1-6: new high-speed USB device number 4 using xhci_hcd [ 2.024458] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6 [ 2.058744] usb 1-6: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 2.058757] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.058763] usb 1-6: Product: USB2.0-CRW [ 2.058768] usb 1-6: Manufacturer: Generic [ 2.058772] usb 1-6: SerialNumber: 20100201396000000 [ 2.190337] usb 1-7: new full-speed USB device number 5 using xhci_hcd [ 2.347874] usb 1-7: New USB device found, idVendor=0cf3, idProduct=e007, bcdDevice= 0.01 [ 2.347879] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.361169] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C52F.0002/input/input10 [ 2.361331] hid-generic 0003:046D:C52F.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input0 [ 2.362536] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0003/input/input11 [ 2.364338] usbcore: registered new interface driver rtsx_usb [ 2.422429] hid-generic 0003:046D:C52F.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input1 [ 2.422457] usbcore: registered new interface driver usbhid [ 2.422458] usbhid: USB HID core driver [ 2.466591] logitech-djreceiver 0003:046D:C52F.0002: hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input0 [ 2.582859] logitech-djreceiver 0003:046D:C52F.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input1 [ 2.643752] logitech-djreceiver 0003:046D:C52F.0003: device of type eQUAD step 4 DJ (0x04) connected on slot 1 [ 2.644090] input: Logitech Wireless Mouse PID:4057 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0003/0003:046D:4057.0004/input/input14 [ 2.644358] input: Logitech Wireless Mouse PID:4057 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0003/0003:046D:4057.0004/input/input15 [ 2.644470] hid-generic 0003:046D:4057.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4057] on usb-0000:00:14.0-2/input1:1 [ 2.739954] input: Logitech B330/M330/M331 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0003/0003:046D:4057.0004/input/input19 [ 2.740055] logitech-hidpp-device 0003:046D:4057.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech B330/M330/M331] on usb-0000:00:14.0-2/input1:1 [ 2.796907] EXT4-fs (nvme0n1p2): mounted filesystem 37886c72-4f83-46a5-9b26-f60df27504e2 with ordered data mode. Quota mode: none. [ 2.975760] systemd[1]: Inserted module 'autofs4' [ 3.106905] systemd[1]: systemd 249.11-0ubuntu3.10 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 3.107019] systemd[1]: Detected architecture x86-64. [ 3.107465] systemd[1]: Hostname set to . [ 3.285447] systemd[1]: Queued start job for default target Graphical Interface. [ 3.383597] systemd[1]: Created slice Slice /system/modprobe. [ 3.384109] systemd[1]: Created slice Slice /system/systemd-fsck. [ 3.384405] systemd[1]: Created slice User and Session Slice. [ 3.384514] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.384718] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.384785] systemd[1]: Reached target User and Group Name Lookups. [ 3.384809] systemd[1]: Reached target Remote File Systems. [ 3.384826] systemd[1]: Reached target Slice Units. [ 3.384845] systemd[1]: Reached target Mounting snaps. [ 3.384866] systemd[1]: Reached target Swaps. [ 3.384889] systemd[1]: Reached target Local Verity Protected Volumes. [ 3.385040] systemd[1]: Listening on Syslog Socket. [ 3.385149] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.385209] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.385414] systemd[1]: Listening on Journal Audit Socket. [ 3.385516] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.385638] systemd[1]: Listening on Journal Socket. [ 3.385858] systemd[1]: Listening on udev Control Socket. [ 3.385965] systemd[1]: Listening on udev Kernel Socket. [ 3.386890] systemd[1]: Mounting Huge Pages File System... [ 3.387866] systemd[1]: Mounting POSIX Message Queue File System... [ 3.388917] systemd[1]: Mounting Kernel Debug File System... [ 3.389853] systemd[1]: Mounting Kernel Trace File System... [ 3.393375] systemd[1]: Starting Journal Service... [ 3.394623] systemd[1]: Starting Set the console keyboard layout... [ 3.395832] systemd[1]: Starting Create List of Static Device Nodes... [ 3.397309] systemd[1]: Starting Load Kernel Module configfs... [ 3.398445] systemd[1]: Starting Load Kernel Module drm... [ 3.399732] systemd[1]: Starting Load Kernel Module efi_pstore... [ 3.401266] systemd[1]: Starting Load Kernel Module fuse... [ 3.401623] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 3.404170] systemd[1]: Starting Load Kernel Modules... [ 3.405683] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.405875] pstore: Using crash dump compression: deflate [ 3.417165] systemd[1]: Starting Coldplug All udev Devices... [ 3.438088] systemd[1]: Mounted Huge Pages File System. [ 3.439209] systemd[1]: Mounted POSIX Message Queue File System. [ 3.440291] systemd[1]: Mounted Kernel Debug File System. [ 3.441695] systemd[1]: Mounted Kernel Trace File System. [ 3.446726] systemd[1]: Finished Create List of Static Device Nodes. [ 3.447537] pstore: Registered efi_pstore as persistent store backend [ 3.447839] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 3.448238] systemd[1]: Finished Load Kernel Module configfs. [ 3.448629] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 3.449030] systemd[1]: Finished Load Kernel Module efi_pstore. [ 3.449481] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 3.449833] systemd[1]: Finished Load Kernel Module fuse. [ 3.450680] EXT4-fs (nvme0n1p2): re-mounted 37886c72-4f83-46a5-9b26-f60df27504e2. Quota mode: none. [ 3.451503] systemd[1]: Mounting FUSE Control File System... [ 3.453107] systemd[1]: Mounting Kernel Configuration File System... [ 3.456831] systemd[1]: Finished Remount Root and Kernel File Systems. [ 3.457073] systemd[1]: Mounted FUSE Control File System. [ 3.457216] systemd[1]: Mounted Kernel Configuration File System. [ 3.457350] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 3.458885] systemd[1]: Starting Load/Save Random Seed... [ 3.460580] systemd[1]: Starting Create System Users... [ 3.468369] systemd[1]: Finished Load/Save Random Seed. [ 3.468575] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 3.486309] ACPI: bus type drm_connector registered [ 3.488100] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 3.488530] systemd[1]: Finished Load Kernel Module drm. [ 3.492659] systemd[1]: Started Journal Service. [ 3.494341] lp: driver loaded but no devices found [ 3.498295] ppdev: user-space parallel port driver [ 3.499236] systemd-journald[253]: Received client request to flush runtime journal. [ 3.549728] loop0: detected capacity change from 0 to 8 [ 3.550113] loop1: detected capacity change from 0 to 140112 [ 3.551637] loop2: detected capacity change from 0 to 113992 [ 3.553010] loop3: detected capacity change from 0 to 129944 [ 3.555414] loop4: detected capacity change from 0 to 129976 [ 3.556947] loop5: detected capacity change from 0 to 151296 [ 3.559101] loop6: detected capacity change from 0 to 151352 [ 3.561194] loop7: detected capacity change from 0 to 492488 [ 3.563618] loop8: detected capacity change from 0 to 489008 [ 3.565226] loop9: detected capacity change from 0 to 508704 [ 3.568676] loop10: detected capacity change from 0 to 508704 [ 3.570949] loop11: detected capacity change from 0 to 337560 [ 3.572520] loop12: detected capacity change from 0 to 716176 [ 3.582075] loop13: detected capacity change from 0 to 994336 [ 3.584325] loop14: detected capacity change from 0 to 1017816 [ 3.586376] loop15: detected capacity change from 0 to 187776 [ 3.588227] loop16: detected capacity change from 0 to 25240 [ 3.590727] loop17: detected capacity change from 0 to 83648 [ 3.593470] loop18: detected capacity change from 0 to 83672 [ 3.594793] loop19: detected capacity change from 0 to 904 [ 3.743704] Consider using thermal netlink events interface [ 3.745454] input: Intel HID events as /devices/platform/INT33D5:00/input/input20 [ 3.748578] intel-hid INT33D5:00: platform supports 5 button array [ 3.749285] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20221020/nsprepkg-94) [ 3.750281] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input21 [ 3.834090] mei_me 0000:00:16.0: enabling device (0004 -> 0006) [ 3.851323] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 3.851714] ACPI Error: No pointer back to namespace node in package 00000000fcb40560 (20221020/dsargs-301) [ 3.851763] No Local Variables are initialized for Method [PPCC] [ 3.851765] No Arguments are initialized for method [PPCC] [ 3.851768] ACPI Error: Aborting method \_SB.PCI0.B0D4.PPCC due to previous error (AE_AML_INTERNAL) (20221020/psparse-529) [ 3.852908] mc: Linux media interface: v0.10 [ 3.918611] videodev: Linux video capture interface: v2.00 [ 3.919418] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.924468] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.953533] Bluetooth: Core ver 2.22 [ 3.953557] NET: Registered PF_BLUETOOTH protocol family [ 3.953559] Bluetooth: HCI device and connection manager initialized [ 3.953564] Bluetooth: HCI socket layer initialized [ 3.953566] Bluetooth: L2CAP socket layer initialized [ 3.953571] Bluetooth: SCO socket layer initialized [ 3.971328] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 3.987144] usbcore: registered new interface driver btusb [ 3.987436] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 3.989802] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:28c0) [ 4.019713] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input22 [ 4.686585] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input23 [ 4.694117] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 4.694121] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.694122] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.694124] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.694125] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.694127] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 4.698040] Console: switching to colour dummy device 80x25 [ 4.698137] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.698791] cryptd: max_cpu_qlen set to 1000 [ 4.700814] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.702789] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 4.708750] AVX2 version of gcm_enc/dec engaged. [ 4.708794] AES CTR mode by8 optimization enabled [ 4.746728] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) [ 4.748853] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 4.788147] usbcore: registered new interface driver uvcvideo [ 4.802247] input: DELL083A:00 044E:120A Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL083A:00/0018:044E:120A.0001/input/input24 [ 4.803107] input: DELL083A:00 044E:120A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL083A:00/0018:044E:120A.0001/input/input25 [ 4.803526] input: DELL083A:00 044E:120A UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL083A:00/0018:044E:120A.0001/input/input26 [ 4.803738] hid-multitouch 0018:044E:120A.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL083A:00 044E:120A] on i2c-DELL083A:00 [ 4.810451] audit: type=1400 audit(1697459043.814:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=416 comm="apparmor_parser" [ 4.828396] audit: type=1400 audit(1697459043.830:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=411 comm="apparmor_parser" [ 4.828403] audit: type=1400 audit(1697459043.830:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=411 comm="apparmor_parser" [ 4.829005] audit: type=1400 audit(1697459043.830:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=410 comm="apparmor_parser" [ 4.831496] audit: type=1400 audit(1697459043.834:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=414 comm="apparmor_parser" [ 4.831505] audit: type=1400 audit(1697459043.834:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=414 comm="apparmor_parser" [ 4.831508] audit: type=1400 audit(1697459043.834:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=414 comm="apparmor_parser" [ 4.831891] audit: type=1400 audit(1697459043.834:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=421 comm="apparmor_parser" [ 4.833237] audit: type=1400 audit(1697459043.834:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=412 comm="apparmor_parser" [ 4.916764] intel_tcc_cooling: Programmable TCC Offset detected [ 4.926562] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 5.017225] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1028:0310 [ 5.017233] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 5.017690] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00157-QCARMSWPZ-1 api 6 features wowlan,ignore-otp,mfp crc32 90eebefb [ 5.096915] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 706c395e [ 5.160758] dell_laptop: Using i8042 filter function for receiving events [ 5.194720] intel_rapl_common: Found RAPL domain package [ 5.194725] intel_rapl_common: Found RAPL domain core [ 5.194727] intel_rapl_common: Found RAPL domain uncore [ 5.194729] intel_rapl_common: Found RAPL domain dram [ 5.194731] intel_rapl_common: Found RAPL domain psys [ 5.196777] ath10k_pci 0000:02:00.0: htt-ver 3.60 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 5.205885] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 5.210692] kauditd_printk_skb: 18 callbacks suppressed [ 5.210695] audit: type=1400 audit(1697459044.214:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gitkraken" pid=480 comm="apparmor_parser" [ 5.214849] audit: type=1400 audit(1697459044.218:30): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/20290/usr/lib/snapd/snap-confine" pid=477 comm="apparmor_parser" [ 5.214856] audit: type=1400 audit(1697459044.218:31): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/20290/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=477 comm="apparmor_parser" [ 5.215462] audit: type=1400 audit(1697459044.218:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/20092/usr/lib/snapd/snap-confine" pid=476 comm="apparmor_parser" [ 5.215468] audit: type=1400 audit(1697459044.218:33): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/20092/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=476 comm="apparmor_parser" [ 5.215556] audit: type=1400 audit(1697459044.218:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.another-redis-desktop-manager" pid=478 comm="apparmor_parser" [ 5.217304] audit: type=1400 audit(1697459044.218:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.snap-store" pid=481 comm="apparmor_parser" [ 5.217609] audit: type=1400 audit(1697459044.218:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.firefox" pid=479 comm="apparmor_parser" [ 5.220371] audit: type=1400 audit(1697459044.222:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.snapd-desktop-integration" pid=482 comm="apparmor_parser" [ 5.227938] audit: type=1400 audit(1697459044.230:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gitkraken.exec" pid=490 comm="apparmor_parser" [ 5.274712] ath: EEPROM regdomain: 0x6c [ 5.274718] ath: EEPROM indicates we should expect a direct regpair map [ 5.274721] ath: Country alpha2 being used: 00 [ 5.274722] ath: Regpair used: 0x6c [ 5.310140] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0 [ 5.626679] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.626686] Bluetooth: BNEP filters: protocol multicast [ 5.626692] Bluetooth: BNEP socket layer initialized [ 5.630825] Bluetooth: MGMT ver 1.22 [ 5.635914] NET: Registered PF_ALG protocol family [ 5.818325] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) [ 5.896240] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 5.901293] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.902738] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input27 [ 5.903169] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.967125] fbcon: i915drmfb (fb0) is primary device [ 6.014750] r8169 0000:01:00.0 enp1s0: Link is Down [ 6.465364] loop20: detected capacity change from 0 to 8 [ 7.106623] Console: switching to colour frame buffer device 170x48 [ 7.126082] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 7.218949] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 7.218954] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.218957] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 7.218959] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 7.218960] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 7.218962] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 7.218964] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 7.218967] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 7.278588] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28 [ 7.278674] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29 [ 7.278775] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30 [ 7.278853] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31 [ 10.158631] rfkill: input handler disabled [ 11.245057] wlp2s0: authenticate with 60:6c:63:ac:58:6e [ 11.245088] wlp2s0: 80 MHz not supported, disabling VHT [ 11.295833] wlp2s0: send auth to 60:6c:63:ac:58:6e (try 1/3) [ 11.299122] wlp2s0: authenticated [ 11.302308] wlp2s0: associate with 60:6c:63:ac:58:6e (try 1/3) [ 11.328392] wlp2s0: RX AssocResp from 60:6c:63:ac:58:6e (capab=0x1431 status=0 aid=2) [ 11.331401] wlp2s0: associated [ 11.331476] ath: EEPROM regdomain: 0x809e [ 11.331478] ath: EEPROM indicates we should expect a country code [ 11.331479] ath: doing EEPROM country->regdmn map search [ 11.331480] ath: country maps to regdmn code: 0x50 [ 11.331481] ath: Country alpha2 being used: TW [ 11.331482] ath: Regpair used: 0x50 [ 11.331483] ath: regdomain 0x809e dynamically updated by country element [ 11.378569] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 60:6c:63:ac:58:6e [ 11.426433] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 11.749682] kauditd_printk_skb: 18 callbacks suppressed [ 11.749684] audit: type=1400 audit(1697459050.750:57): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1569 comm="apparmor_parser" [ 11.832782] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 11.834575] Bridge firewalling registered [ 11.914795] Initializing XFRM netlink socket [ 13.225113] rfkill: input handler enabled [ 13.708341] br0: renamed from ov-001000-nrqy8 [ 13.827407] vxlan0: renamed from vx-001000-nrqy8 [ 13.859660] br0: port 1(vxlan0) entered blocking state [ 13.859676] br0: port 1(vxlan0) entered disabled state [ 13.859861] device vxlan0 entered promiscuous mode [ 13.860358] br0: port 1(vxlan0) entered blocking state [ 13.860368] br0: port 1(vxlan0) entered forwarding state [ 13.931465] veth0: renamed from vethb50e730 [ 13.959592] br0: port 2(veth0) entered blocking state [ 13.959607] br0: port 2(veth0) entered disabled state [ 13.959825] device veth0 entered promiscuous mode [ 13.960497] br0: port 2(veth0) entered blocking state [ 13.960507] br0: port 2(veth0) entered forwarding state [ 14.052273] br0: renamed from ov-001002-ou2ac [ 14.171418] vxlan0: renamed from vx-001002-ou2ac [ 14.199836] br0: port 1(vxlan0) entered blocking state [ 14.199852] br0: port 1(vxlan0) entered disabled state [ 14.200077] device vxlan0 entered promiscuous mode [ 14.200542] br0: port 1(vxlan0) entered blocking state [ 14.200556] br0: port 1(vxlan0) entered forwarding state [ 14.200666] eth0: renamed from veth42d6a16 [ 14.276087] veth0: renamed from vethf426126 [ 14.303024] br0: port 2(veth0) entered blocking state [ 14.303059] br0: port 2(veth0) entered disabled state [ 14.303458] device veth0 entered promiscuous mode [ 14.304015] br0: port 2(veth0) entered blocking state [ 14.304029] br0: port 2(veth0) entered forwarding state [ 14.306439] docker_gwbridge: port 1(veth3895a14) entered blocking state [ 14.306457] docker_gwbridge: port 1(veth3895a14) entered disabled state [ 14.307014] device veth3895a14 entered promiscuous mode [ 14.307633] docker_gwbridge: port 1(veth3895a14) entered blocking state [ 14.307648] docker_gwbridge: port 1(veth3895a14) entered forwarding state [ 14.307833] br0: port 2(veth0) entered disabled state [ 14.308076] docker_gwbridge: port 1(veth3895a14) entered disabled state [ 14.356611] eth1: renamed from veth5250012 [ 14.392827] IPv6: ADDRCONF(NETDEV_CHANGE): veth3895a14: link becomes ready [ 14.392998] docker_gwbridge: port 1(veth3895a14) entered blocking state [ 14.393013] docker_gwbridge: port 1(veth3895a14) entered forwarding state [ 14.393317] IPv6: ADDRCONF(NETDEV_CHANGE): docker_gwbridge: link becomes ready [ 14.468430] eth0: renamed from veth115176c [ 14.501427] br0: port 2(veth0) entered blocking state [ 14.501447] br0: port 2(veth0) entered forwarding state [ 16.081037] br0: port 2(veth0) entered disabled state [ 16.081075] br0: port 1(vxlan0) entered disabled state [ 16.081352] ov-001002-ou2ac: renamed from br0 [ 16.098903] device veth0 left promiscuous mode [ 16.098956] ov-001002-ou2ac: port 2(veth0) entered disabled state [ 16.126818] device vxlan0 left promiscuous mode [ 16.126878] ov-001002-ou2ac: port 1(vxlan0) entered disabled state [ 16.195194] vx-001002-ou2ac: renamed from vxlan0 [ 16.231647] vethf426126: renamed from veth0 [ 16.326796] veth115176c: renamed from eth0 [ 18.517335] audit: type=1400 audit(1697459057.518:58): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/20290/usr/lib/snapd/snap-confine" pid=2059 comm="snap-confine" capability=12 capname="net_admin" [ 18.517343] audit: type=1400 audit(1697459057.518:59): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/20290/usr/lib/snapd/snap-confine" pid=2059 comm="snap-confine" capability=38 capname="perfmon" [ 18.859140] Bluetooth: RFCOMM TTY layer initialized [ 18.859148] Bluetooth: RFCOMM socket layer initialized [ 18.859153] Bluetooth: RFCOMM ver 1.11 [ 18.866672] veth1: renamed from vethb12de65 [ 18.886760] br0: port 3(veth1) entered blocking state [ 18.886766] br0: port 3(veth1) entered disabled state [ 18.886851] device veth1 entered promiscuous mode [ 18.890799] docker_gwbridge: port 2(vethf710284) entered blocking state [ 18.890805] docker_gwbridge: port 2(vethf710284) entered disabled state [ 18.890880] device vethf710284 entered promiscuous mode [ 18.890969] docker_gwbridge: port 2(vethf710284) entered blocking state [ 18.890973] docker_gwbridge: port 2(vethf710284) entered forwarding state [ 18.924094] docker_gwbridge: port 2(vethf710284) entered disabled state [ 18.942231] device vethf710284 left promiscuous mode [ 18.942241] docker_gwbridge: port 2(vethf710284) entered disabled state [ 19.016178] br0: port 3(veth1) entered disabled state [ 19.016453] device veth1 left promiscuous mode [ 19.016457] br0: port 3(veth1) entered disabled state [ 19.098195] br0: renamed from ov-001002-ou2ac [ 19.174884] vxlan0: renamed from vx-001002-ou2ac [ 19.190901] br0: port 1(vxlan0) entered blocking state [ 19.190906] br0: port 1(vxlan0) entered disabled state [ 19.190959] device vxlan0 entered promiscuous mode [ 19.191083] br0: port 1(vxlan0) entered blocking state [ 19.191087] br0: port 1(vxlan0) entered forwarding state [ 19.230793] veth0: renamed from veth4d7d6c6 [ 19.267019] br0: port 2(veth0) entered blocking state [ 19.267027] br0: port 2(veth0) entered disabled state [ 19.267089] device veth0 entered promiscuous mode [ 19.267239] br0: port 2(veth0) entered blocking state [ 19.267242] br0: port 2(veth0) entered forwarding state [ 19.350873] eth0: renamed from veth3abe38b [ 19.426954] veth2: renamed from veth8951ec0 [ 19.455080] br0: port 3(veth2) entered blocking state [ 19.455088] br0: port 3(veth2) entered disabled state [ 19.455176] device veth2 entered promiscuous mode [ 19.455297] br0: port 3(veth2) entered blocking state [ 19.455301] br0: port 3(veth2) entered forwarding state [ 19.458961] docker_gwbridge: port 2(vethe652f60) entered blocking state [ 19.458968] docker_gwbridge: port 2(vethe652f60) entered disabled state [ 19.459061] device vethe652f60 entered promiscuous mode [ 19.459578] docker_gwbridge: port 2(vethe652f60) entered blocking state [ 19.459582] docker_gwbridge: port 2(vethe652f60) entered forwarding state [ 19.590842] veth1: renamed from vethc01cb1a [ 19.614976] br0: port 3(veth1) entered blocking state [ 19.614983] br0: port 3(veth1) entered disabled state [ 19.615038] device veth1 entered promiscuous mode [ 19.615121] br0: port 3(veth1) entered blocking state [ 19.615124] br0: port 3(veth1) entered forwarding state [ 19.843752] eth0: renamed from veth08e2814 [ 19.887943] docker_gwbridge: port 2(vethe652f60) entered disabled state [ 19.888128] br0: port 3(veth1) entered disabled state [ 20.027752] eth1: renamed from vethe3a6bdd [ 20.051543] br0: port 3(veth1) entered blocking state [ 20.051557] br0: port 3(veth1) entered forwarding state [ 20.075768] eth2: renamed from veth720a7a1 [ 20.091318] IPv6: ADDRCONF(NETDEV_CHANGE): vethe652f60: link becomes ready [ 20.091452] docker_gwbridge: port 2(vethe652f60) entered blocking state [ 20.091463] docker_gwbridge: port 2(vethe652f60) entered forwarding state [ 20.178671] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) [ 20.178686] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 20.178880] IPVS: ipvs loaded. [ 20.275646] IPVS: [rr] scheduler registered. [ 20.277975] IPVS: starting estimator thread 0... [ 20.286747] IPVS: starting estimator thread 0... [ 20.350332] IPVS: using max 7632 ests per chain, 381600 per kthread [ 20.358338] IPVS: using max 9024 ests per chain, 451200 per kthread