Dec 21 15:42:12 jarnos-OptiPlex-9010 ModemManager[1554]: <info>  [sleep-monitor] system is about to suspend
Dec 21 15:42:12 jarnos-OptiPlex-9010 NetworkManager[1456]: <info>  [1671630132.4099] manager: sleep: sleep requested (sleeping: no  enabled: yes)
Dec 21 15:42:12 jarnos-OptiPlex-9010 NetworkManager[1456]: <info>  [1671630132.4100] manager: NetworkManager state is now ASLEEP
Dec 21 15:42:12 jarnos-OptiPlex-9010 whoopsie[2088]: [15:42:12] offline
Dec 21 15:42:12 jarnos-OptiPlex-9010 systemd[1]: Reached target Sleep.
Dec 21 15:42:12 jarnos-OptiPlex-9010 systemd[1]: Starting Record successful boot for GRUB...
Dec 21 15:42:12 jarnos-OptiPlex-9010 systemd[1]: Starting Suspend...
Dec 21 15:42:12 jarnos-OptiPlex-9010 systemd[1]: grub-common.service: Succeeded.
Dec 21 15:42:12 jarnos-OptiPlex-9010 systemd[1]: Finished Record successful boot for GRUB.
Dec 21 15:42:12 jarnos-OptiPlex-9010 systemd[1]: Starting GRUB failed boot detection...
Dec 21 15:42:12 jarnos-OptiPlex-9010 systemd[1]: grub-initrd-fallback.service: Succeeded.
Dec 21 15:42:12 jarnos-OptiPlex-9010 systemd[1]: Finished GRUB failed boot detection.
Dec 21 15:42:12 jarnos-OptiPlex-9010 sudo[5401]:     root : TTY=unknown ; PWD=/ ; USER=jarnos ; ENV=XDG_RUNTIME_DIR=/run/user/1000 ; COMMAND=/bin/sh -c pacmd list-sinks | awk '/^[[:blank:]]*\*/{getline;
                                                 print substr($2,2,length($2)-2); exit}' >"/dev/shm/sink-1000"
                                                 pactl unload-module module-remap-sink
Dec 21 15:42:12 jarnos-OptiPlex-9010 sudo[5401]: pam_unix(sudo:session): session opened for user jarnos by (uid=0)
Dec 21 15:42:12 jarnos-OptiPlex-9010 sudo[5401]: pam_unix(sudo:session): session closed for user jarnos
Dec 21 15:42:12 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: received EP1 urb->status = -108
Dec 21 15:42:12 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: reset high-speed USB device number 8 using ehci-pci
Dec 21 15:42:13 jarnos-OptiPlex-9010 systemd-sleep[5379]: Suspending system...
Dec 21 15:42:13 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: failed to restore interface 0 altsetting 1 (error=-19)
Dec 21 15:42:13 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: USB disconnect, device number 8
Dec 21 15:42:13 jarnos-OptiPlex-9010 kernel: PM: suspend entry (deep)
Dec 21 15:42:13 jarnos-OptiPlex-9010 systemd-udevd[5410]: 1-1.1.3:1.0: Process '/usr/lib/snapd/snap-device-helper unbind snap_cups_cupsd /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0 0:0' failed with exit code 1.
Dec 21 15:42:13 jarnos-OptiPlex-9010 systemd-udevd[5410]: 1-1.1.3:1.0: Process '/usr/lib/snapd/snap-device-helper unbind snap_cups_ippeveprinter /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0 0:0' failed with exit code 1.
Dec 21 15:42:13 jarnos-OptiPlex-9010 systemd-udevd[5410]: 1-1.1.3: Process '/usr/lib/snapd/snap-device-helper unbind snap_cups_cupsd /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3 189:7' failed with exit code 1.
Dec 21 15:42:13 jarnos-OptiPlex-9010 systemd-udevd[5410]: 1-1.1.3: Process '/usr/lib/snapd/snap-device-helper unbind snap_cups_ippeveprinter /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3 189:7' failed with exit code 1.
Dec 21 15:42:13 jarnos-OptiPlex-9010 kernel: Filesystems sync: 0.012 seconds
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: Freezing user space processes ... (elapsed 0.001 seconds) done.
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: OOM killer disabled.
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: Freezing remaining freezable tasks ... 
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: new high-speed USB device number 12 using ehci-pci
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: language id specifier not provided by device, defaulting to English
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: New USB device found, idVendor=17cc, idProduct=0815, bcdDevice= 0.16
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: Product: Audio Kontrol 1
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: Manufacturer: Native Instruments
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: SerialNumber: SN-0F42DP9LTB   
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: input: Audio Kontrol 1 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/input/input31
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: (elapsed 0.127 seconds) done.
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: received EP1 urb->status = -108
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: serial 00:06: disabled
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: e1000e: EEE TX LPI TIMER: 00000011
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: sd 2:0:0:0: [sdb] Synchronizing SCSI cache
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: sd 0:0:0:0: [sda] Stopping disk
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: sd 2:0:0:0: [sdb] Stopping disk
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: reset high-speed USB device number 12 using ehci-pci
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ACPI: PM: Preparing to enter system sleep state S3
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ACPI: PM: Saving platform NVS memory
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: Disabling non-boot CPUs ...
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: smpboot: CPU 1 is now offline
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: smpboot: CPU 2 is now offline
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: smpboot: CPU 3 is now offline
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ACPI: PM: Low-level resume complete
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ACPI: PM: Restoring platform NVS memory
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: Enabling non-boot CPUs ...
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: x86: Booting SMP configuration:
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: CPU1 is up
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: smpboot: Booting Node 0 Processor 2 APIC 0x4
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: CPU2 is up
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: smpboot: Booting Node 0 Processor 3 APIC 0x6
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: CPU3 is up
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ACPI: PM: Waking up from system sleep state S3
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [IRQE] at bit offset/length 136/16 exceeds size of target Buffer (128 bits) (20210730/dsopcode-198)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: 
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: No Local Variables are initialized for Method [DSRS]
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: 
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: Initialized Arguments for Method [DSRS]:  (2 arguments defined for method invocation)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel:   Arg0:   00000000ca1d7288 <Obj>           Buffer(16) 47 01 F8 03 FF 03 00 08
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel:   Arg1:   000000001f5713ab <Obj>           Integer 0000000000000000
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: 
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.SIO1.DSRS due to previous error (AE_AML_BUFFER_LIMIT) (20210730/psparse-529)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.UAR1._SRS due to previous error (AE_AML_BUFFER_LIMIT) (20210730/psparse-529)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: serial 00:06: activation failed
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: PM: dpm_run_callback(): pnp_bus_resume+0x0/0xb0 returns -5
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: serial 00:06: PM: failed to resume: error -5
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: sd 0:0:0:0: [sda] Starting disk
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: sd 2:0:0:0: [sdb] Starting disk
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: reset high-speed USB device number 12 using ehci-pci
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: PM: dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -5
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: PM: failed to resume async: error -5
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: OOM killer enabled.
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: Restarting tasks ... done.
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: video LNXVIDEO:00: Restoring backlight state
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: USB disconnect, device number 12
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: PM: suspend exit
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-sleep[5379]: System resumed.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5410]: 1-1.1.3: Process '/usr/lib/snapd/snap-device-helper add snap_cups_cupsd /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3 189:11' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5410]: 1-1.1.3: Process '/usr/lib/snapd/snap-device-helper add snap_cups_ippeveprinter /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3 189:11' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata1.00: configured for UDMA/133
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata2.00: configured for UDMA/100
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3:1.0: Process '/usr/lib/snapd/snap-device-helper add snap_cups_cupsd /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0 0:0' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5538]: js0: Process '/usr/lib/snapd/snap-device-helper add snap_chromium_chromedriver /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/input/input31/js0 13:0' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5538]: js0: Process '/usr/lib/snapd/snap-device-helper add snap_chromium_chromium /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/input/input31/js0 13:0' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3:1.0: Process '/usr/lib/snapd/snap-device-helper add snap_cups_ippeveprinter /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0 0:0' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5528]: controlC1: /usr/lib/udev/rules.d/78-sound-card.rules:5 Failed to write ATTR{/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/sound/card1/controlC1/../uevent}, ignoring: No such file or directory
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd[2324]: Reached target Sound Card.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-sleep[5566]: /dev/sda:
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-sleep[5566]:  setting Advanced Power Management level to 0xfe (254)
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-sleep[5566]:  APM_level        = 254
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: ata3.00: configured for UDMA/133
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3:1.0: Process '/usr/lib/snapd/snap-device-helper bind snap_cups_cupsd /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0 0:0' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3:1.0: Process '/usr/lib/snapd/snap-device-helper bind snap_cups_ippeveprinter /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0 0:0' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: new high-speed USB device number 13 using ehci-pci
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3: Process '/usr/lib/snapd/snap-device-helper bind snap_cups_cupsd /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3 189:11' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3: Process '/usr/lib/snapd/snap-device-helper bind snap_cups_ippeveprinter /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3 189:11' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-sleep[5588]: /dev/sdb:
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-sleep[5588]:  setting Advanced Power Management level to 0xfe (254)
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-sleep[5588]:  APM_level        = 254
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3:1.0: Process '/usr/lib/snapd/snap-device-helper unbind snap_cups_cupsd /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0 0:0' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3:1.0: Process '/usr/lib/snapd/snap-device-helper unbind snap_cups_ippeveprinter /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0 0:0' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3: Process '/usr/lib/snapd/snap-device-helper unbind snap_cups_cupsd /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3 189:11' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3: Process '/usr/lib/snapd/snap-device-helper unbind snap_cups_ippeveprinter /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3 189:11' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: language id specifier not provided by device, defaulting to English
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: New USB device found, idVendor=17cc, idProduct=0815, bcdDevice= 0.16
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: Product: Audio Kontrol 1
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: Manufacturer: Native Instruments
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: usb 1-1.1.3: SerialNumber: SN-0F42DP9LTB   
Dec 21 16:04:20 jarnos-OptiPlex-9010 kernel: input: Audio Kontrol 1 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/input/input35
Dec 21 16:04:20 jarnos-OptiPlex-9010 mtp-probe[5673]: checking bus 1, device 13: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3"
Dec 21 16:04:20 jarnos-OptiPlex-9010 mtp-probe[5673]: bus: 1, device: 13 was not an MTP device
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3:1.0: Process '/usr/lib/snapd/snap-device-helper bind snap_cups_cupsd /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0 0:0' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3:1.0: Process '/usr/lib/snapd/snap-device-helper bind snap_cups_ippeveprinter /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0 0:0' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 mtp-probe[5688]: checking bus 1, device 13: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3"
Dec 21 16:04:20 jarnos-OptiPlex-9010 mtp-probe[5688]: bus: 1, device: 13 was not an MTP device
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3: Process '/usr/lib/snapd/snap-device-helper bind snap_cups_cupsd /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3 189:12' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 systemd-udevd[5536]: 1-1.1.3: Process '/usr/lib/snapd/snap-device-helper bind snap_cups_ippeveprinter /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3 189:12' failed with exit code 1.
Dec 21 16:04:20 jarnos-OptiPlex-9010 rtkit-daemon[1934]: Supervising 5 threads of 1 processes of 1 users.
Dec 21 16:04:20 jarnos-OptiPlex-9010 rtkit-daemon[1934]: Successfully made thread 5712 of process 2331 owned by '1000' RT at priority 5.
Dec 21 16:04:20 jarnos-OptiPlex-9010 rtkit-daemon[1934]: Supervising 6 threads of 1 processes of 1 users.
Dec 21 16:04:21 jarnos-OptiPlex-9010 systemd-sleep[5523]: 1-1.1.3