[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-11-generic (buildd@crested) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #38-Ubuntu SMP Fri Mar 27 10:01:17 UTC 2009 (Ubuntu 2.6.28-11.38-generic) [ 0.000000] Command line: root=UUID=72a13b93-5a2b-4697-a118-8680cbf961f6 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfef0000 (usable) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cfef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfef3000 - 00000000cff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff [ 0.000000] last_pfn = 0xcfef0 max_arch_pfn = 0x3ffffffff [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfef0000 (usable) [ 0.000000] modified: 00000000cfef0000 - 00000000cfef3000 (ACPI NVS) [ 0.000000] modified: 00000000cfef3000 - 00000000cff00000 (ACPI data) [ 0.000000] modified: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f2000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfef0000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfef0000 page 4k [ 0.000000] kernel direct mapping tables up to cfef0000 @ 10000-16000 [ 0.000000] last_map_addr: cfef0000 end: cfef0000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000 [ 0.000000] last_map_addr: 130000000 end: 130000000 [ 0.000000] RAMDISK: 3785b000 - 37fefd54 [ 0.000000] ACPI: RSDP 000F77C0, 0024 (r2 Nvidia) [ 0.000000] ACPI: XSDT CFEF30C0, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP CFEF9740, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT CFEF3240, 64AC (r1 NVIDIA ASUSACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS CFEF0000, 0040 [ 0.000000] ACPI: HPET CFEF9980, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG CFEF9A00, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC CFEF9880, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: SSDT CFEFA100, 0304 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000b854b0] TEXT DATA BSS ==> [0000200000 - 0000b854b0] [ 0.000000] #3 [003785b000 - 0037fefd54] RAMDISK ==> [003785b000 - 0037fefd54] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #6 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ 0.000000] found SMP MP-table at [ffff8800000f5c80] 000f5c80 [ 0.000000] [ffffe20000000000-ffffe200043fffff] PMD -> [ffff880028200000-ffff88002c5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfef0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048191 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2544 pages reserved [ 0.000000] DMA zone: 1383 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833320 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cfef3000 [ 0.000000] PM: Registered nosave memory: 00000000cfef3000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f2000000 [ 0.000000] PM: Registered nosave memory: 00000000f2000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e1000000 (gap: e0000000:10000000) [ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028623 [ 0.000000] Kernel command line: root=UUID=72a13b93-5a2b-4697-a118-8680cbf961f6 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2399.936 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] allocated 49807360 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.004000] Memory: 3983484k/4980736k available (4761k kernel code, 787972k absent, 208384k reserved, 2539k data, 536k init) [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.87 BogoMIPS (lpj=9599744) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] ACPI: Core revision 20080926 [ 0.004000] ACPI: Checking initramfs for custom DSDT [ 0.280049] Setting APIC routing to flat [ 0.280562] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.322388] CPU0: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 0.324001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4799.97 BogoMIPS (lpj=9599955) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.408468] CPU1: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 0.408490] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.412139] Booting processor 2 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 4799.96 BogoMIPS (lpj=9599931) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.500494] CPU2: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 0.500515] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.504091] Booting processor 3 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 4799.98 BogoMIPS (lpj=9599977) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.592467] CPU3: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 0.592487] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.596029] Brought up 4 CPUs [ 0.596034] Total of 4 processors activated (19199.80 BogoMIPS). [ 0.596120] CPU0 attaching sched-domain: [ 0.596122] domain 0: span 0-1 level MC [ 0.596124] groups: 0 1 [ 0.596126] domain 1: span 0-3 level CPU [ 0.596128] groups: 0-1 2-3 [ 0.596132] CPU1 attaching sched-domain: [ 0.596134] domain 0: span 0-1 level MC [ 0.596135] groups: 1 0 [ 0.596137] domain 1: span 0-3 level CPU [ 0.596139] groups: 0-1 2-3 [ 0.596142] CPU2 attaching sched-domain: [ 0.596143] domain 0: span 2-3 level MC [ 0.596145] groups: 2 3 [ 0.596147] domain 1: span 0-3 level CPU [ 0.596149] groups: 2-3 0-1 [ 0.596152] CPU3 attaching sched-domain: [ 0.596153] domain 0: span 2-3 level MC [ 0.596155] groups: 3 2 [ 0.596157] domain 1: span 0-3 level CPU [ 0.596158] groups: 2-3 0-1 [ 0.596265] net_namespace: 1400 bytes [ 0.596265] Booting paravirtualized kernel on bare hardware [ 0.596272] Time: 10:47:58 Date: 03/30/09 [ 0.596272] regulator: core version 0.5 [ 0.596272] NET: Registered protocol family 16 [ 0.596272] ACPI: bus type pci registered [ 0.596272] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31 [ 0.596272] PCI: MCFG area at f0000000 reserved in E820 [ 0.597287] PCI: Using MMCONFIG at f0000000 - f1ffffff [ 0.597288] PCI: Using configuration type 1 for base access [ 0.600390] ACPI: EC: Look up EC in DSDT [ 0.608487] ACPI: Interpreter enabled [ 0.608489] ACPI: (supports S0 S1 S3 S4 S5) [ 0.608516] ACPI: Using IOAPIC for interrupt routing [ 0.616843] ACPI: No dock devices found. [ 0.616852] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.617645] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.617648] pci 0000:00:03.0: PME# disabled [ 0.617682] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.617685] pci 0000:00:07.0: PME# disabled [ 0.617906] pci 0000:00:0a.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.617911] pci 0000:00:0a.1: reg 24 io port: [0x1c80-0x1cbf] [ 0.617924] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.617929] pci 0000:00:0a.1: PME# disabled [ 0.617996] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.618021] pci 0000:00:0b.0: supports D1 D2 [ 0.618022] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.618026] pci 0000:00:0b.0: PME# disabled [ 0.618053] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.618078] pci 0000:00:0b.1: supports D1 D2 [ 0.618080] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.618083] pci 0000:00:0b.1: PME# disabled [ 0.618124] pci 0000:00:0d.0: reg 20 io port: [0xfd00-0xfd0f] [ 0.618164] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] [ 0.618169] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] [ 0.618173] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] [ 0.618177] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] [ 0.618182] pci 0000:00:0e.0: reg 20 io port: [0xf800-0xf80f] [ 0.618186] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.618227] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7] [ 0.618231] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3] [ 0.618236] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967] [ 0.618240] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63] [ 0.618244] pci 0000:00:0f.0: reg 20 io port: [0xf300-0xf30f] [ 0.618248] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.618326] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff] [ 0.618351] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.618354] pci 0000:00:10.1: PME# disabled [ 0.618389] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.618393] pci 0000:00:14.0: reg 14 io port: [0xf200-0xf207] [ 0.618414] pci 0000:00:14.0: supports D1 D2 [ 0.618415] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.618418] pci 0000:00:14.0: PME# disabled [ 0.618458] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.618466] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.618474] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.618478] pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f] [ 0.618483] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbfe0000-0xfbffffff] [ 0.618534] pci 0000:00:03.0: bridge io port: [0xe000-0xefff] [ 0.618536] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.618540] pci 0000:00:03.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.618581] pci 0000:02:00.0: reg 10 io port: [0xcf00-0xcf07] [ 0.618588] pci 0000:02:00.0: reg 14 io port: [0xce00-0xce03] [ 0.618595] pci 0000:02:00.0: reg 18 io port: [0xcd00-0xcd07] [ 0.618601] pci 0000:02:00.0: reg 1c io port: [0xcc00-0xcc03] [ 0.618608] pci 0000:02:00.0: reg 20 io port: [0xcb00-0xcb0f] [ 0.618615] pci 0000:02:00.0: reg 24 32bit mmio: [0xfddfe000-0xfddfffff] [ 0.618630] pci 0000:02:00.0: PME# supported from D3hot [ 0.618634] pci 0000:02:00.0: PME# disabled [ 0.618680] pci 0000:00:07.0: bridge io port: [0xc000-0xcfff] [ 0.618682] pci 0000:00:07.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.618686] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.618723] pci 0000:03:08.0: reg 10 32bit mmio: [0xfdfff000-0xfdfff7ff] [ 0.618729] pci 0000:03:08.0: reg 14 io port: [0xdf00-0xdf7f] [ 0.618759] pci 0000:03:08.0: supports D2 [ 0.618760] pci 0000:03:08.0: PME# supported from D2 D3hot D3cold [ 0.618763] pci 0000:03:08.0: PME# disabled [ 0.618794] pci 0000:00:10.0: transparent bridge [ 0.618797] pci 0000:00:10.0: bridge io port: [0xd000-0xdfff] [ 0.618799] pci 0000:00:10.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.618802] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfde00000-0xfdefffff] [ 0.618812] bus 00 -> node 0 [ 0.618818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.619162] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.689879] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.690044] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.690206] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.690368] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.690532] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15) [ 0.690694] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) [ 0.690855] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.691017] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.691181] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.691343] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.691506] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 0.691673] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.691836] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.692006] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.692169] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.692330] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.692492] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.692653] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.692816] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 0.692983] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 0.693187] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.693380] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.693571] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.693782] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.693972] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 [ 0.694163] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.694353] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.694543] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.694734] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.694927] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.695120] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.695313] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 0.695510] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.695706] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.695903] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.696107] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.696300] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.696492] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.696685] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.696876] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.697069] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.697191] ACPI: WMI: Mapper loaded [ 0.697233] SCSI subsystem initialized [ 0.697233] libata version 3.00 loaded. [ 0.697233] usbcore: registered new interface driver usbfs [ 0.697233] usbcore: registered new interface driver hub [ 0.697233] usbcore: registered new device driver usb [ 0.697233] PCI: Using ACPI for IRQ routing [ 0.712013] Bluetooth: Core ver 2.13 [ 0.712030] NET: Registered protocol family 31 [ 0.712030] Bluetooth: HCI device and connection manager initialized [ 0.712030] Bluetooth: HCI socket layer initialized [ 0.712030] NET: Registered protocol family 8 [ 0.712030] NET: Registered protocol family 20 [ 0.712040] NetLabel: Initializing [ 0.712042] NetLabel: domain hash size = 128 [ 0.712043] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.712059] NetLabel: unlabeled traffic allowed by default [ 0.712108] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.712113] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.720068] AppArmor: AppArmor Filesystem Enabled [ 0.724010] Switched to high resolution mode on CPU 0 [ 0.724550] Switched to high resolution mode on CPU 1 [ 0.725600] Switched to high resolution mode on CPU 3 [ 0.725625] Switched to high resolution mode on CPU 2 [ 0.732053] pnp: PnP ACPI init [ 0.732063] ACPI: bus type pnp registered [ 0.736603] pnp: PnP ACPI: found 14 devices [ 0.736605] ACPI: ACPI bus type pnp unregistered [ 0.736611] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.736613] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.736615] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.736617] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.736619] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.736621] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.736623] system 00:01: iomem range 0xd0000000-0xdfffffff has been reserved [ 0.736627] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.736629] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.736631] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.736632] system 00:02: ioport range 0x880-0x88f has been reserved [ 0.736639] system 00:0c: iomem range 0xf0000000-0xf1ffffff has been reserved [ 0.736643] system 00:0d: iomem range 0xda000-0xdbfff has been reserved [ 0.736645] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 0.736647] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 0.736649] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 0.736650] system 00:0d: iomem range 0xfeff0000-0xfeff00ff has been reserved [ 0.736652] system 00:0d: iomem range 0xcfef0000-0xcfefffff could not be reserved [ 0.736654] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved [ 0.736656] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.736658] system 00:0d: iomem range 0x100000-0xcfeeffff could not be reserved [ 0.736660] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.736661] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.736663] system 00:0d: iomem range 0xfeff0000-0xfeff03ff could not be reserved [ 0.741325] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 [ 0.741327] pci 0000:00:03.0: IO window: 0xe000-0xefff [ 0.741330] pci 0000:00:03.0: MEM window: 0xf8000000-0xfbffffff [ 0.741333] pci 0000:00:03.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.741337] pci 0000:00:07.0: PCI bridge, secondary bus 0000:02 [ 0.741338] pci 0000:00:07.0: IO window: 0xc000-0xcfff [ 0.741341] pci 0000:00:07.0: MEM window: 0xfdd00000-0xfddfffff [ 0.741344] pci 0000:00:07.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff [ 0.741347] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.741349] pci 0000:00:10.0: IO window: 0xd000-0xdfff [ 0.741353] pci 0000:00:10.0: MEM window: 0xfdf00000-0xfdffffff [ 0.741355] pci 0000:00:10.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff [ 0.741364] pci 0000:00:03.0: setting latency timer to 64 [ 0.741369] pci 0000:00:07.0: setting latency timer to 64 [ 0.741373] pci 0000:00:10.0: setting latency timer to 64 [ 0.741376] bus: 00 index 0 io port: [0x00-0xffff] [ 0.741378] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.741379] bus: 01 index 0 io port: [0xe000-0xefff] [ 0.741381] bus: 01 index 1 mmio: [0xf8000000-0xfbffffff] [ 0.741382] bus: 01 index 2 mmio: [0xe0000000-0xefffffff] [ 0.741383] bus: 01 index 3 mmio: [0x0-0x0] [ 0.741385] bus: 02 index 0 io port: [0xc000-0xcfff] [ 0.741386] bus: 02 index 1 mmio: [0xfdd00000-0xfddfffff] [ 0.741387] bus: 02 index 2 mmio: [0xfdc00000-0xfdcfffff] [ 0.741388] bus: 02 index 3 mmio: [0x0-0x0] [ 0.741390] bus: 03 index 0 io port: [0xd000-0xdfff] [ 0.741391] bus: 03 index 1 mmio: [0xfdf00000-0xfdffffff] [ 0.741393] bus: 03 index 2 mmio: [0xfde00000-0xfdefffff] [ 0.741394] bus: 03 index 3 io port: [0x00-0xffff] [ 0.741395] bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.741403] NET: Registered protocol family 2 [ 0.776103] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.776577] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.778630] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.779284] TCP: Hash tables configured (established 262144 bind 65536) [ 0.779286] TCP reno registered [ 0.788203] NET: Registered protocol family 1 [ 0.788343] checking if image is initramfs... it is [ 1.346572] Freeing initrd memory: 7763k freed [ 1.351447] audit: initializing netlink socket (disabled) [ 1.351463] type=2000 audit(1238410078.348:1): initialized [ 1.358576] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.359733] VFS: Disk quotas dquot_6.5.1 [ 1.359791] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.360399] fuse init (API version 7.10) [ 1.360458] msgmni has been set to 7797 [ 1.360738] alg: No test for stdrng (krng) [ 1.360758] io scheduler noop registered [ 1.360760] io scheduler anticipatory registered [ 1.360763] io scheduler deadline registered [ 1.360808] io scheduler cfq registered (default) [ 1.360988] pci 0000:00:03.0: Disabling HT MSI mapping<6>pci 0000:00:07.0: Disabling HT MSI mapping<6>pci 0000:00:09.0: Disabling HT MSI mapping<6>pci 0000:00:0e.0: Disabling HT MSI mapping<6>pci 0000:00:0f.0: Disabling HT MSI mapping<6>pci 0000:00:10.0: Disabling HT MSI mapping<6>pci 0000:00:10.1: Disabling HT MSI mapping<7>pci 0000:01:00.0: Boot video device [ 1.383335] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 1.383366] pcieport-driver 0000:00:03.0: found MSI capability [ 1.383385] pcieport-driver 0000:00:03.0: irq 2303 for MSI/MSI-X [ 1.383392] pci_express 0000:00:03.0:pcie00: allocate port service [ 1.383403] pci_express 0000:00:03.0:pcie03: allocate port service [ 1.383443] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 1.383473] pcieport-driver 0000:00:07.0: found MSI capability [ 1.383488] pcieport-driver 0000:00:07.0: irq 2302 for MSI/MSI-X [ 1.383496] pci_express 0000:00:07.0:pcie00: allocate port service [ 1.383505] pci_express 0000:00:07.0:pcie03: allocate port service [ 1.383552] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.383559] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.383685] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.383687] ACPI: Power Button (FF) [PWRF] [ 1.383720] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.383722] ACPI: Power Button (CM) [PWRB] [ 1.383771] fan PNP0C0B:00: registered as cooling_device0 [ 1.383775] ACPI: Fan [FAN] (on) [ 1.384209] ACPI: SSDT CFEF9A80, 0175 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 1.384462] processor ACPI_CPU:00: registered as cooling_device1 [ 1.384622] ACPI: SSDT CFEF9E90, 00CE (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 1.384860] processor ACPI_CPU:01: registered as cooling_device2 [ 1.385009] ACPI: SSDT CFEF9F60, 00CE (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 1.385245] processor ACPI_CPU:02: registered as cooling_device3 [ 1.385399] ACPI: SSDT CFEFA030, 00CE (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 1.385645] processor ACPI_CPU:03: registered as cooling_device4 [ 1.389533] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.389890] ACPI: Thermal Zone [THRM] (40 C) [ 1.417778] Linux agpgart interface v0.103 [ 1.417786] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.417879] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.418168] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.418757] brd: module loaded [ 1.418992] loop: module loaded [ 1.419042] Fixed MDIO Bus: probed [ 1.419046] PPP generic driver version 2.4.2 [ 1.419090] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.419110] Driver 'sd' needs updating - please use bus_type methods [ 1.419116] Driver 'sr' needs updating - please use bus_type methods [ 1.419156] ahci 0000:02:00.0: version 3.0 [ 1.419451] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 1.419456] ahci 0000:02:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 [ 1.433564] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 1.433568] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.433573] ahci 0000:02:00.0: setting latency timer to 64 [ 1.433692] scsi0 : ahci [ 1.433768] ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16 [ 1.752040] ata1: SATA link down (SStatus 0 SControl 300) [ 1.768228] sata_nv 0000:00:0e.0: version 3.5 [ 1.768534] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 1.768539] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.768540] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 1.768566] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 1.768702] scsi1 : sata_nv [ 1.768790] scsi2 : sata_nv [ 1.768986] ata2: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 23 [ 1.768989] ata3: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 23 [ 2.502523] ata2: SATA link down (SStatus 0 SControl 300) [ 3.234506] ata3: SATA link down (SStatus 0 SControl 300) [ 3.234810] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 3.234814] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 3.234816] sata_nv 0000:00:0f.0: Using SWNCQ mode [ 3.234842] sata_nv 0000:00:0f.0: setting latency timer to 64 [ 3.234969] scsi3 : sata_nv [ 3.235076] scsi4 : sata_nv [ 3.235275] ata4: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 22 [ 3.235278] ata5: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 22 [ 3.966498] ata4: SATA link down (SStatus 0 SControl 300) [ 4.698496] ata5: SATA link down (SStatus 0 SControl 300) [ 4.698598] pata_amd 0000:00:0d.0: version 0.3.10 [ 4.698625] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 4.698759] scsi5 : pata_amd [ 4.698839] scsi6 : pata_amd [ 4.699543] ata6: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14 [ 4.699545] ata7: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15 [ 4.868501] ata6.00: ATA-7: Maxtor 6Y200P0, YAR41BW0, max UDMA/133 [ 4.868504] ata6.00: 398297088 sectors, multi 1: LBA48 [ 4.868532] ata6.01: ATAPI: _NEC DVD+RW ND-1100A, 1.A3, max UDMA/33 [ 4.868556] ata6: nv_mode_filter: 0x7f39f&0x7f01f->0x7f01f, BIOS=0x7f000 (0xc7c00000) ACPI=0x7f01f (15:60:0x1f) [ 4.868561] ata6: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc7c00000) ACPI=0x701f (15:60:0x1f) [ 4.884437] ata6.00: configured for UDMA/133 [ 4.900284] ata6.01: configured for UDMA/33 [ 5.067185] scsi 5:0:0:0: Direct-Access ATA Maxtor 6Y200P0 YAR4 PQ: 0 ANSI: 5 [ 5.067257] sd 5:0:0:0: [sda] 398297088 512-byte hardware sectors: (203 GB/189 GiB) [ 5.067270] sd 5:0:0:0: [sda] Write Protect is off [ 5.067271] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.067291] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.067344] sd 5:0:0:0: [sda] 398297088 512-byte hardware sectors: (203 GB/189 GiB) [ 5.067355] sd 5:0:0:0: [sda] Write Protect is off [ 5.067357] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.067377] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.067379] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 5.143935] sd 5:0:0:0: [sda] Attached SCSI disk [ 5.144007] sd 5:0:0:0: Attached scsi generic sg0 type 0 [ 5.146005] scsi 5:0:1:0: CD-ROM _NEC DVD+RW ND-1100A 1.A3 PQ: 0 ANSI: 5 [ 5.149370] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 5.149373] Uniform CD-ROM driver Revision: 3.20 [ 5.149476] sr 5:0:1:0: Attached scsi CD-ROM sr0 [ 5.149517] sr 5:0:1:0: Attached scsi generic sg1 type 5 [ 5.149976] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.150347] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 5.150357] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 5.150385] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 5.150387] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 5.150449] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 5.150488] ehci_hcd 0000:00:0b.1: debug port 1 [ 5.150492] ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported [ 5.150510] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000 [ 5.160049] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 5.160128] usb usb1: configuration #1 chosen from 1 choice [ 5.160156] hub 1-0:1.0: USB hub found [ 5.160164] hub 1-0:1.0: 8 ports detected [ 5.160282] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.160584] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 5.160588] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 [ 5.160595] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 5.160598] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 5.160632] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 5.160651] ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000 [ 5.218045] usb usb2: configuration #1 chosen from 1 choice [ 5.218064] hub 2-0:1.0: USB hub found [ 5.218071] hub 2-0:1.0: 8 ports detected [ 5.218143] uhci_hcd: USB Universal Host Controller Interface driver [ 5.218181] usbcore: registered new interface driver libusual [ 5.218207] usbcore: registered new interface driver usbserial [ 5.218214] USB Serial support registered for generic [ 5.218225] usbcore: registered new interface driver usbserial_generic [ 5.218227] usbserial: USB Serial Driver core [ 5.218263] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 5.218265] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 5.218333] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.228069] mice: PS/2 mouse device common for all mice [ 5.264104] rtc_cmos 00:05: RTC can wake from S4 [ 5.264154] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 5.264185] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 5.264262] device-mapper: uevent: version 1.0.3 [ 5.264406] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 5.264646] device-mapper: multipath: version 1.0.5 loaded [ 5.264649] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.264871] cpuidle: using governor ladder [ 5.264873] cpuidle: using governor menu [ 5.265221] TCP cubic registered [ 5.265273] NET: Registered protocol family 10 [ 5.265608] lo: Disabled Privacy Extensions [ 5.265824] NET: Registered protocol family 17 [ 5.265839] Bluetooth: L2CAP ver 2.11 [ 5.265840] Bluetooth: L2CAP socket layer initialized [ 5.265842] Bluetooth: SCO (Voice Link) ver 0.6 [ 5.265843] Bluetooth: SCO socket layer initialized [ 5.265908] Bluetooth: RFCOMM socket layer initialized [ 5.265914] Bluetooth: RFCOMM TTY layer initialized [ 5.265916] Bluetooth: RFCOMM ver 1.10 [ 5.267184] registered taskstats version 1 [ 5.267324] Magic number: 1:531:781 [ 5.267417] rtc_cmos 00:05: setting system clock to 2009-03-30 10:48:02 UTC (1238410082) [ 5.267419] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 5.267420] EDD information not available. [ 5.267461] Freeing unused kernel memory: 536k freed [ 5.267643] Write protecting the kernel read-only data: 6708k [ 5.280229] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 5.415950] Floppy drive(s): fd0 is 1.44M [ 5.433429] FDC 0 is a post-1991 82077 [ 5.464402] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 5.464855] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 5.464860] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 5.464864] forcedeth 0000:00:14.0: setting latency timer to 64 [ 5.464918] nv_probe: set workaround bit for reversed mac addr [ 5.466778] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 5.466791] ohci1394 0000:03:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 5.476466] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 5.519412] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 5.613862] usb 1-1: configuration #1 chosen from 1 choice [ 5.614194] hub 1-1:1.0: USB hub found [ 5.614538] hub 1-1:1.0: 4 ports detected [ 5.888810] usb 1-1.1: new full speed USB device using ehci_hcd and address 3 [ 5.986238] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:92:ce:62:aa [ 5.986242] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3 [ 5.986592] usb 1-1.1: configuration #1 chosen from 1 choice [ 5.991593] usbcore: registered new interface driver hiddev [ 5.994619] input: WALTOP International Corp. Slim Tablet as /devices/pci0000:00/0000:00:0b.1/usb1/1-1/1-1.1/1-1.1:1.0/input/input4 [ 6.024077] generic-usb 0003:172F:0031.0001: input,hidraw0: USB HID v1.10 Mouse [WALTOP International Corp. Slim Tablet] on usb-0000:00:0b.1-1.1/input0 [ 6.024092] usbcore: registered new interface driver usbhid [ 6.024095] usbhid: v2.6:USB HID core driver [ 6.060809] usb 1-1.3: new low speed USB device using ehci_hcd and address 4 [ 6.080979] PM: Starting manual resume from disk [ 6.080983] PM: Resume from partition 8:9 [ 6.080984] PM: Checking hibernation image. [ 6.081228] PM: Resume from disk failed. [ 6.083665] EXT3-fs: INFO: recovery required on readonly filesystem. [ 6.083667] EXT3-fs: write access will be enabled during recovery. [ 6.166025] usb 1-1.3: configuration #1 chosen from 1 choice [ 6.170304] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0b.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input5 [ 6.200153] generic-usb 0003:046D:C01D.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.1-1.3/input0 [ 6.276818] usb 1-1.4: new high speed USB device using ehci_hcd and address 5 [ 6.370288] usb 1-1.4: configuration #1 chosen from 1 choice [ 6.370595] hub 1-1.4:1.0: USB hub found [ 6.370929] hub 1-1.4:1.0: 4 ports detected [ 6.644825] usb 1-1.4.3: new full speed USB device using ehci_hcd and address 6 [ 6.742168] usb 1-1.4.3: configuration #1 chosen from 1 choice [ 6.746688] Initializing USB Mass Storage driver... [ 6.748337] scsi7 : SCSI emulation for USB Mass Storage devices [ 6.748467] usb-storage: device found at 6 [ 6.748476] usb-storage: waiting for device to settle before scanning [ 6.748484] usbcore: registered new interface driver usb-storage [ 6.748488] USB Mass Storage support registered. [ 6.792225] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800013777f1] [ 7.701622] kjournald starting. Commit interval 5 seconds [ 7.701642] EXT3-fs: sda10: orphan cleanup on readonly fs [ 7.717203] ext3_orphan_cleanup: deleting unreferenced inode 247399 [ 7.717241] ext3_orphan_cleanup: deleting unreferenced inode 247420 [ 7.717249] EXT3-fs: sda10: 2 orphan inodes deleted [ 7.717251] EXT3-fs: recovery complete. [ 7.738290] EXT3-fs: mounted filesystem with ordered data mode. [ 11.748620] usb-storage: device scan complete [ 11.767933] scsi 7:0:0:0: Direct-Access Brother DCP-135C 1.00 PQ: 0 ANSI: 2 [ 11.808578] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 11.808658] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 13.687055] udev: starting version 140 [ 13.939079] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 14.235227] parport_pc 00:0a: reported by Plug and Play ACPI [ 14.235265] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 14.477947] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01CE [ 14.477978] usbcore: registered new interface driver usblp [ 14.961412] nvidia: module license 'NVIDIA' taints kernel. [ 15.215589] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 15.215594] nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [ 15.215601] nvidia 0000:01:00.0: setting latency timer to 64 [ 15.215985] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.37 Fri Mar 6 00:32:38 PST 2009 [ 15.236835] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 15.236869] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80 [ 15.255715] ppdev: user-space parallel port driver [ 15.486508] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 15.486512] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 15.486586] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 16.261208] lp0: using parport0 (interrupt-driven). [ 16.357152] Adding 2224960k swap on /dev/sda9. Priority:-1 extents:1 across:2224960k [ 16.889828] EXT3 FS on sda10, internal journal [ 17.882870] type=1505 audit(1238402895.112:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2158 [ 17.922512] type=1505 audit(1238402895.153:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2162 [ 17.922595] type=1505 audit(1238402895.153:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2162 [ 17.922626] type=1505 audit(1238402895.153:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2162 [ 17.922654] type=1505 audit(1238402895.153:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2162 [ 18.008257] type=1505 audit(1238402895.237:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2167 [ 18.008430] type=1505 audit(1238402895.237:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2167 [ 18.037100] type=1505 audit(1238402895.269:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2171 [ 23.394498] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.394502] Bluetooth: BNEP filters: protocol multicast [ 23.444172] Bridge firewalling registered