[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-7-generic (buildd@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:40:41 UTC 2008 (Ubuntu 2.6.27-7.14-generic) [ 0.000000] Command line: root=UUID=c86d77b6-57e9-4fa8-857b-8d11cd8bb658 ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable) [ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff [ 0.000000] last_pfn = 0xbfff0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfff0000 page 4k [ 0.000000] kernel direct mapping tables up to bfff0000 @ 8000-d000 [ 0.000000] last_map_addr: bfff0000 end: bfff0000 [ 0.000000] init_memory_mapping [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000 [ 0.000000] last_map_addr: 140000000 end: 140000000 [ 0.000000] RAMDISK: 377ad000 - 37fefb4e [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP 000F81B0, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT BFFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP BFFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT BFFF3180, 623B (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS BFFF0000, 0040 [ 0.000000] ACPI: SSDT BFFF94C0, 0188 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: MCFG BFFF96C0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC BFFF9400, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [000000000000c000 - 0000000000033fff] pages 28 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==> [0000200000 - 00008b8f9c] [ 0.000000] #3 [00377ad000 - 0037fefb4e] RAMDISK ==> [00377ad000 - 0037fefb4e] [ 0.000000] #4 [000009c000 - 0000100000] BIOS reserved ==> [000009c000 - 0000100000] [ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] found SMP MP-table at [ffff8800000f3ba0] 000f3ba0 [ 0.000000] [ffffe20000000000-ffffe20004ffffff] PMD -> [ffff880028200000-ffff88002c1fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000bfff0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048460 [ 0.000000] DMA zone: 2103 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 766000 pages, LIFO batch:31 [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfff3000 [ 0.000000] PM: Registered nosave memory: 00000000bfff3000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1026151 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=c86d77b6-57e9-4fa8-857b-8d11cd8bb658 ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2009.235 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ 4000000 size 32 MB [ 0.004000] Aperture pointing to e820 RAM. Ignoring. [ 0.004000] Your BIOS doesn't leave a aperture memory hole [ 0.004000] Please enable the IOMMU option in the BIOS setup [ 0.004000] This costs you 64 MB of RAM [ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.004000] Memory: 4047040k/5242880k available (3112k kernel code, 146800k reserved, 1575k data, 536k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.47 BogoMIPS (lpj=8036940) [ 0.004127] Security Framework initialized [ 0.004178] SELinux: Disabled at boot. [ 0.004240] AppArmor: AppArmor initialized [ 0.004695] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.007449] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.008824] Mount-cache hash table entries: 256 [ 0.009076] Initializing cgroup subsys ns [ 0.009123] Initializing cgroup subsys cpuacct [ 0.009169] Initializing cgroup subsys memory [ 0.009228] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.009275] CPU: L2 Cache: 512K (64 bytes/line) [ 0.009321] CPU 0/0 -> Node 0 [ 0.009364] tseg: 0000000000 [ 0.009378] CPU: Physical Processor ID: 0 [ 0.009422] CPU: Processor Core ID: 0 [ 0.010884] ACPI: Core revision 20080609 [ 0.013134] ACPI: Checking initramfs for custom DSDT [ 0.367484] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.407231] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 [ 0.407347] Using local APIC timer interrupts. [ 0.408027] APIC timer calibration result 12557726 [ 0.408029] Detected 12.557 MHz APIC timer. [ 0.408242] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4018.49 BogoMIPS (lpj=8036993) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.496180] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 [ 0.496615] Brought up 2 CPUs [ 0.496660] Total of 2 processors activated (8036.96 BogoMIPS). [ 0.496757] CPU0 attaching sched-domain: [ 0.496760] domain 0: span 0-1 level CPU [ 0.496763] groups: 0 1 [ 0.496767] domain 1: span 0-1 level NODE [ 0.496769] groups: 0-1 [ 0.496774] CPU1 attaching sched-domain: [ 0.496776] domain 0: span 0-1 level CPU [ 0.496778] groups: 1 0 [ 0.496782] domain 1: span 0-1 level NODE [ 0.496784] groups: 0-1 [ 0.496876] net_namespace: 1552 bytes [ 0.496876] Booting paravirtualized kernel on bare hardware [ 0.496876] Time: 20:10:56 Date: 12/05/08 [ 0.496876] NET: Registered protocol family 16 [ 0.496876] node 0 link 0: io port [6000, ffff] [ 0.496876] TOM: 00000000c0000000 aka 3072M [ 0.496876] node 0 link 0: mmio [a0000, bffff] [ 0.496876] node 0 link 0: mmio [feb00000, fec0ffff] [ 0.496876] node 0 link 0: mmio [c0000000, febfffff] [ 0.496876] node 0 link 0: mmio [e0000000, e05fffff] [ 0.496876] TOM2: 0000000140000000 aka 5120M [ 0.496876] bus: [00,05] on node 0 link 0 [ 0.496876] bus: 00 index 0 io port: [0, ffff] [ 0.496876] bus: 00 index 1 mmio: [a0000, bffff] [ 0.496876] bus: 00 index 2 mmio: [c0000000, ffffffff] [ 0.496876] bus: 00 index 3 mmio: [140000000, fcffffffff] [ 0.496876] ACPI: bus type pci registered [ 0.496876] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.496876] PCI: MCFG area at e0000000 reserved in E820 [ 0.510841] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.510890] PCI: Using configuration type 1 for base access [ 0.513311] ACPI: EC: Look up EC in DSDT [ 0.523598] ACPI: Interpreter enabled [ 0.523646] ACPI: (supports S0 S3 S4 S5) [ 0.523836] ACPI: Using IOAPIC for interrupt routing [ 0.536175] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.536175] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.536175] PCI: 0000:00:01.1 reg 10 io port: [fc00, fc1f] [ 0.536175] PCI: 0000:00:01.1 reg 20 io port: [f800, f83f] [ 0.536176] PCI: 0000:00:01.1 reg 24 io port: [f400, f43f] [ 0.536185] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.536232] pci 0000:00:01.1: PME# disabled [ 0.536292] PCI: 0000:00:02.0 reg 10 32bit mmio: [febff000, febfffff] [ 0.536308] pci 0000:00:02.0: supports D1 [ 0.536310] pci 0000:00:02.0: supports D2 [ 0.536312] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.536359] pci 0000:00:02.0: PME# disabled [ 0.536418] PCI: 0000:00:02.1 reg 10 32bit mmio: [feb00000, feb000ff] [ 0.536437] pci 0000:00:02.1: supports D1 [ 0.536438] pci 0000:00:02.1: supports D2 [ 0.536440] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.536488] pci 0000:00:02.1: PME# disabled [ 0.536548] PCI: 0000:00:04.0 reg 10 io port: [f000, f0ff] [ 0.536552] PCI: 0000:00:04.0 reg 14 io port: [ec00, ecff] [ 0.536556] PCI: 0000:00:04.0 reg 18 32bit mmio: [febfd000, febfdfff] [ 0.536569] pci 0000:00:04.0: supports D1 [ 0.536570] pci 0000:00:04.0: supports D2 [ 0.536589] PCI: 0000:00:06.0 reg 20 io port: [e000, e00f] [ 0.536610] PCI: 0000:00:07.0 reg 10 io port: [9f0, 9f7] [ 0.536613] PCI: 0000:00:07.0 reg 14 io port: [bf0, bf3] [ 0.536617] PCI: 0000:00:07.0 reg 18 io port: [970, 977] [ 0.536620] PCI: 0000:00:07.0 reg 1c io port: [b70, b73] [ 0.536623] PCI: 0000:00:07.0 reg 20 io port: [cc00, cc0f] [ 0.536627] PCI: 0000:00:07.0 reg 24 32bit mmio: [febfb000, febfbfff] [ 0.536646] PCI: 0000:00:08.0 reg 10 io port: [9e0, 9e7] [ 0.536649] PCI: 0000:00:08.0 reg 14 io port: [be0, be3] [ 0.536653] PCI: 0000:00:08.0 reg 18 io port: [960, 967] [ 0.536656] PCI: 0000:00:08.0 reg 1c io port: [b60, b63] [ 0.536660] PCI: 0000:00:08.0 reg 20 io port: [b800, b80f] [ 0.536663] PCI: 0000:00:08.0 reg 24 32bit mmio: [febfa000, febfafff] [ 0.536693] PCI: 0000:00:0a.0 reg 10 32bit mmio: [febf9000, febf9fff] [ 0.536696] PCI: 0000:00:0a.0 reg 14 io port: [b400, b407] [ 0.536711] pci 0000:00:0a.0: supports D1 [ 0.536712] pci 0000:00:0a.0: supports D2 [ 0.536714] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.536762] pci 0000:00:0a.0: PME# disabled [ 0.536828] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.536876] pci 0000:00:0b.0: PME# disabled [ 0.536940] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.536988] pci 0000:00:0c.0: PME# disabled [ 0.537057] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.537104] pci 0000:00:0d.0: PME# disabled [ 0.537168] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.537215] pci 0000:00:0e.0: PME# disabled [ 0.537344] PCI: 0000:01:0a.0 reg 10 32bit mmio: [fe9fe000, fe9fffff] [ 0.537380] pci 0000:00:09.0: transparent bridge [ 0.537426] PCI: bridge 0000:00:09.0 io port: [a000, afff] [ 0.537429] PCI: bridge 0000:00:09.0 32bit mmio: [fe900000, fe9fffff] [ 0.537432] PCI: bridge 0000:00:09.0 32bit mmio pref: [fea00000, feafffff] [ 0.537462] PCI: bridge 0000:00:0b.0 io port: [9000, 9fff] [ 0.537465] PCI: bridge 0000:00:0b.0 32bit mmio: [fe800000, fe8fffff] [ 0.537469] PCI: bridge 0000:00:0b.0 64bit mmio pref: [fe700000, fe7fffff] [ 0.537499] PCI: bridge 0000:00:0c.0 io port: [8000, 8fff] [ 0.537502] PCI: bridge 0000:00:0c.0 32bit mmio: [fe600000, fe6fffff] [ 0.537505] PCI: bridge 0000:00:0c.0 64bit mmio pref: [fe500000, fe5fffff] [ 0.537535] PCI: bridge 0000:00:0d.0 io port: [7000, 7fff] [ 0.537538] PCI: bridge 0000:00:0d.0 32bit mmio: [fe400000, fe4fffff] [ 0.537542] PCI: bridge 0000:00:0d.0 64bit mmio pref: [fe300000, fe3fffff] [ 0.537564] PCI: 0000:05:00.0 reg 10 32bit mmio: [fb000000, fbffffff] [ 0.537568] PCI: 0000:05:00.0 reg 14 32bit mmio: [d0000000, dfffffff] [ 0.537578] PCI: 0000:05:00.0 reg 1c 64bit mmio: [fc000000, fcffffff] [ 0.537582] PCI: 0000:05:00.0 reg 24 io port: [6c00, 6c7f] [ 0.537587] PCI: 0000:05:00.0 reg 30 32bit mmio: [0, 1ffff] [ 0.537622] PCI: bridge 0000:00:0e.0 io port: [6000, 6fff] [ 0.537625] PCI: bridge 0000:00:0e.0 32bit mmio: [fb000000, fdffffff] [ 0.537628] PCI: bridge 0000:00:0e.0 64bit mmio pref: [d0000000, dfffffff] [ 0.537645] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.538077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.622237] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.622237] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.624287] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.624937] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.626505] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.627231] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.627881] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.628592] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.629244] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.629894] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.630620] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.631271] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.631921] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.632669] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.633338] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.633997] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.634752] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.635199] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.635646] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.636093] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.636454] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.636884] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.637405] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.637959] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.638478] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.638998] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.639552] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.640081] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.640602] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.641166] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.641696] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.642226] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.642608] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.642608] pnp: PnP ACPI init [ 0.642608] ACPI: bus type pnp registered [ 0.648912] pnp: PnP ACPI: found 15 devices [ 0.648912] ACPI: ACPI bus type pnp unregistered [ 0.648912] PCI: Using ACPI for IRQ routing [ 0.664042] NET: Registered protocol family 8 [ 0.664087] NET: Registered protocol family 20 [ 0.664147] NetLabel: Initializing [ 0.664147] NetLabel: domain hash size = 128 [ 0.664164] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.664224] NetLabel: unlabeled traffic allowed by default [ 0.664330] PCI-DMA: Disabling AGP. [ 0.664332] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.664332] PCI-DMA: using GART IOMMU. [ 0.664332] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.666162] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 0.666215] actual entries 65586 [ 0.666397] AppArmor: AppArmor Filesystem Enabled [ 0.666470] ACPI: RTC can wake from S4 [ 0.680082] system 00:00: ioport range 0x1000-0x107f has been reserved [ 0.680131] system 00:00: ioport range 0x1080-0x10ff has been reserved [ 0.680178] system 00:00: ioport range 0x1400-0x147f has been reserved [ 0.680226] system 00:00: ioport range 0x1480-0x14ff has been reserved [ 0.680273] system 00:00: ioport range 0x1800-0x187f has been reserved [ 0.680321] system 00:00: ioport range 0x1880-0x18ff has been reserved [ 0.680375] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.680422] system 00:02: ioport range 0x800-0x807 has been reserved [ 0.680469] system 00:02: ioport range 0x290-0x30f has been reserved [ 0.680517] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.680577] system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.680637] system 00:0e: iomem range 0xd1800-0xd3fff has been reserved [ 0.680685] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved [ 0.680733] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved [ 0.680781] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved [ 0.680829] system 00:0e: iomem range 0xbfff0000-0xbfffffff could not be reserved [ 0.680885] system 00:0e: iomem range 0xffff0000-0xffffffff could not be reserved [ 0.680940] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.680988] system 00:0e: iomem range 0x100000-0xbffeffff could not be reserved [ 0.681043] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.681099] system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.681154] system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.681210] system 00:0e: iomem range 0xfff80000-0xfff80fff could not be reserved [ 0.681265] system 00:0e: iomem range 0xfff90000-0xfffbffff could not be reserved [ 0.681321] system 00:0e: iomem range 0xfffed000-0xfffeffff could not be reserved [ 0.686678] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.686727] pci 0000:00:09.0: IO window: 0xa000-0xafff [ 0.686775] pci 0000:00:09.0: MEM window: 0xfe900000-0xfe9fffff [ 0.686823] pci 0000:00:09.0: PREFETCH window: 0x000000fea00000-0x000000feafffff [ 0.686880] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.686927] pci 0000:00:0b.0: IO window: 0x9000-0x9fff [ 0.686974] pci 0000:00:0b.0: MEM window: 0xfe800000-0xfe8fffff [ 0.687022] pci 0000:00:0b.0: PREFETCH window: 0x000000fe700000-0x000000fe7fffff [ 0.687079] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.687125] pci 0000:00:0c.0: IO window: 0x8000-0x8fff [ 0.687173] pci 0000:00:0c.0: MEM window: 0xfe600000-0xfe6fffff [ 0.687220] pci 0000:00:0c.0: PREFETCH window: 0x000000fe500000-0x000000fe5fffff [ 0.687277] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04 [ 0.687324] pci 0000:00:0d.0: IO window: 0x7000-0x7fff [ 0.687371] pci 0000:00:0d.0: MEM window: 0xfe400000-0xfe4fffff [ 0.687418] pci 0000:00:0d.0: PREFETCH window: 0x000000fe300000-0x000000fe3fffff [ 0.687478] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05 [ 0.687525] pci 0000:00:0e.0: IO window: 0x6000-0x6fff [ 0.687572] pci 0000:00:0e.0: MEM window: 0xfb000000-0xfdffffff [ 0.687619] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.687683] pci 0000:00:09.0: setting latency timer to 64 [ 0.687690] pci 0000:00:0b.0: setting latency timer to 64 [ 0.687695] pci 0000:00:0c.0: setting latency timer to 64 [ 0.687701] pci 0000:00:0d.0: setting latency timer to 64 [ 0.687706] pci 0000:00:0e.0: setting latency timer to 64 [ 0.687710] bus: 00 index 0 io port: [0, ffff] [ 0.687755] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.687801] bus: 01 index 0 io port: [a000, afff] [ 0.687846] bus: 01 index 1 mmio: [fe900000, fe9fffff] [ 0.687892] bus: 01 index 2 mmio: [fea00000, feafffff] [ 0.687938] bus: 01 index 3 io port: [0, ffff] [ 0.687983] bus: 01 index 4 mmio: [0, ffffffffffffffff] [ 0.688049] Switched to high resolution mode on CPU 0 [ 0.688051] bus: 02 index 0 io port: [9000, 9fff] [ 0.688097] bus: 02 index 1 mmio: [fe800000, fe8fffff] [ 0.688142] bus: 02 index 2 mmio: [fe700000, fe7fffff] [ 0.688188] bus: 02 index 3 mmio: [0, 0] [ 0.688210] Switched to high resolution mode on CPU 1 [ 0.688241] bus: 03 index 0 io port: [8000, 8fff] [ 0.688286] bus: 03 index 1 mmio: [fe600000, fe6fffff] [ 0.688332] bus: 03 index 2 mmio: [fe500000, fe5fffff] [ 0.688378] bus: 03 index 3 mmio: [0, 0] [ 0.688422] bus: 04 index 0 io port: [7000, 7fff] [ 0.688467] bus: 04 index 1 mmio: [fe400000, fe4fffff] [ 0.688513] bus: 04 index 2 mmio: [fe300000, fe3fffff] [ 0.688559] bus: 04 index 3 mmio: [0, 0] [ 0.688603] bus: 05 index 0 io port: [6000, 6fff] [ 0.688649] bus: 05 index 1 mmio: [fb000000, fdffffff] [ 0.688694] bus: 05 index 2 mmio: [d0000000, dfffffff] [ 0.688740] bus: 05 index 3 mmio: [0, 0] [ 0.688799] NET: Registered protocol family 2 [ 0.728182] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.730002] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.735077] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.735757] TCP: Hash tables configured (established 524288 bind 65536) [ 0.735806] TCP reno registered [ 0.744125] NET: Registered protocol family 1 [ 0.744301] checking if image is initramfs... it is [ 1.586341] Freeing initrd memory: 8458k freed [ 1.593899] audit: initializing netlink socket (disabled) [ 1.593972] type=2000 audit(1228507856.592:1): initialized [ 1.600152] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.604139] VFS: Disk quotas dquot_6.5.1 [ 1.604325] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.604509] msgmni has been set to 7920 [ 1.604712] io scheduler noop registered [ 1.604757] io scheduler anticipatory registered [ 1.604802] io scheduler deadline registered [ 1.605045] io scheduler cfq registered (default) [ 1.605110] pci 0000:00:00.0: Enabling HT MSI Mapping [ 1.621088] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 1.621140] pci 0000:00:0b.0: Found enabled HT MSI Mapping [ 1.621188] pci 0000:00:0b.0: Linking AER extended capability [ 1.621243] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 1.621293] pci 0000:00:0c.0: Found enabled HT MSI Mapping [ 1.621339] pci 0000:00:0c.0: Linking AER extended capability [ 1.621394] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 1.621444] pci 0000:00:0d.0: Found enabled HT MSI Mapping [ 1.621490] pci 0000:00:0d.0: Linking AER extended capability [ 1.621544] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 1.621594] pci 0000:00:0e.0: Found enabled HT MSI Mapping [ 1.621640] pci 0000:00:0e.0: Linking AER extended capability [ 1.621704] pci 0000:05:00.0: Boot video device [ 1.621848] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 1.621869] pcieport-driver 0000:00:0b.0: found MSI capability [ 1.621934] pci_express 0000:00:0b.0:pcie00: allocate port service [ 1.622002] pci_express 0000:00:0b.0:pcie03: allocate port service [ 1.622092] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 1.622111] pcieport-driver 0000:00:0c.0: found MSI capability [ 1.622171] pci_express 0000:00:0c.0:pcie00: allocate port service [ 1.622232] pci_express 0000:00:0c.0:pcie03: allocate port service [ 1.622319] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 1.622339] pcieport-driver 0000:00:0d.0: found MSI capability [ 1.622398] pci_express 0000:00:0d.0:pcie00: allocate port service [ 1.622459] pci_express 0000:00:0d.0:pcie03: allocate port service [ 1.622546] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 1.622565] pcieport-driver 0000:00:0e.0: found MSI capability [ 1.622625] pci_express 0000:00:0e.0:pcie00: allocate port service [ 1.622687] pci_express 0000:00:0e.0:pcie03: allocate port service [ 1.671104] Linux agpgart interface v0.103 [ 1.671157] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.671374] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.671596] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.672322] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.672739] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.676272] brd: module loaded [ 1.676408] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.676614] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.679313] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.679364] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.693207] mice: PS/2 mouse device common for all mice [ 1.693440] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.693508] rtc0: alarms up to one year, y3k [ 1.693615] cpuidle: using governor ladder [ 1.693661] cpuidle: using governor menu [ 1.694098] TCP cubic registered [ 1.694438] registered taskstats version 1 [ 1.694627] Magic number: 4:151:194 [ 1.694715] tty ttys6: hash matches [ 1.694887] rtc_cmos 00:04: setting system clock to 2008-12-05 20:10:57 UTC (1228507857) [ 1.694943] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.694989] EDD information not available. [ 1.695080] Freeing unused kernel memory: 536k freed [ 1.695400] Write protecting the kernel read-only data: 4348k [ 1.726749] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.838772] fuse init (API version 7.9) [ 1.855272] fan PNP0C0B:00: registered as cooling_device0 [ 1.855334] ACPI: Fan [FAN] (on) [ 1.862400] processor ACPI0007:00: registered as cooling_device1 [ 1.862540] processor ACPI0007:01: registered as cooling_device2 [ 1.865484] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.865978] ACPI: Thermal Zone [THRM] (40 C) [ 2.252274] usbcore: registered new interface driver usbfs [ 2.252352] usbcore: registered new interface driver hub [ 2.252463] usbcore: registered new device driver usb [ 2.269362] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.269846] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 2.269905] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 2.269974] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 2.269977] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 2.270079] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 2.270165] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfebff000 [ 2.289424] No dock devices found. [ 2.302660] SCSI subsystem initialized [ 2.318379] libata version 3.00 loaded. [ 2.327367] usb usb1: configuration #1 chosen from 1 choice [ 2.327448] hub 1-0:1.0: USB hub found [ 2.327502] hub 1-0:1.0: 10 ports detected [ 2.533983] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 2.534047] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 2.534118] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 2.534121] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 2.534206] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 2.534290] ehci_hcd 0000:00:02.1: debug port 1 [ 2.534337] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 2.534356] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000 [ 2.545096] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.545359] usb usb2: configuration #1 chosen from 1 choice [ 2.545446] hub 2-0:1.0: USB hub found [ 2.545505] hub 2-0:1.0: 10 ports detected [ 2.753602] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 2.754149] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 2.754206] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21 [ 2.754265] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 2.754310] nv_probe: set workaround bit for reversed mac addr [ 3.168025] usb 1-8: new full speed USB device using ohci_hcd and address 2 [ 3.272527] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:15:58:0d:52:cb [ 3.272587] forcedeth 0000:00:0a.0: highdma csum timirq lnktim desc-v3 [ 3.274071] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 3.274131] b43-pci-bridge 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 3.277551] ssb: Sonics Silicon Backplane found on PCI device 0000:01:0a.0 [ 3.281096] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 3.281689] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 3.281752] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 3.281824] pata_acpi 0000:00:07.0: setting latency timer to 64 [ 3.281832] pata_acpi 0000:00:07.0: PCI INT A disabled [ 3.282362] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 3.282410] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 3.282479] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 3.282486] pata_acpi 0000:00:08.0: PCI INT A disabled [ 3.287826] sata_nv 0000:00:07.0: version 3.5 [ 3.287850] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 3.287968] sata_nv 0000:00:07.0: setting latency timer to 64 [ 3.290177] scsi0 : sata_nv [ 3.290395] scsi1 : sata_nv [ 3.290669] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 20 [ 3.290718] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 20 [ 3.348038] usb 1-8: device descriptor read/64, error -62 [ 3.632025] usb 1-8: device descriptor read/64, error -62 [ 3.764034] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.816861] ata1.00: ATA-7: ST3160812AS, 3.AAH, max UDMA/133 [ 3.816911] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.883492] ata1.00: configured for UDMA/133 [ 3.912029] usb 1-8: new full speed USB device using ohci_hcd and address 3 [ 4.093021] usb 1-8: device descriptor read/64, error -62 [ 4.200020] ata2: SATA link down (SStatus 0 SControl 300) [ 4.200201] scsi 0:0:0:0: Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5 [ 4.200405] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 4.200521] sata_nv 0000:00:08.0: setting latency timer to 64 [ 4.200604] scsi2 : sata_nv [ 4.200733] scsi3 : sata_nv [ 4.201005] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 23 [ 4.201055] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 23 [ 4.380026] usb 1-8: device descriptor read/64, error -62 [ 4.660035] usb 1-8: new full speed USB device using ohci_hcd and address 4 [ 4.676029] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.699208] ata3.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133 [ 4.699256] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.706092] ata3.00: configured for UDMA/133 [ 5.068019] usb 1-8: device not accepting address 4, error -62 [ 5.180028] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.205111] ata4.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L08, max UDMA/100 [ 5.236118] ata4.00: configured for UDMA/100 [ 5.236291] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 5.238585] scsi 3:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L08 PQ: 0 ANSI: 5 [ 5.240333] pata_amd 0000:00:06.0: version 0.3.10 [ 5.240378] pata_amd 0000:00:06.0: setting latency timer to 64 [ 5.240480] scsi4 : pata_amd [ 5.241592] scsi5 : pata_amd [ 5.242598] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14 [ 5.242646] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15 [ 5.245028] usb 1-8: new full speed USB device using ohci_hcd and address 5 [ 5.568259] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S202J, SB01, max UDMA/66 [ 5.568318] ata6: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc500) ACPI=0x1f01f (30:600:0x13) [ 5.584195] ata6.00: configured for UDMA/66 [ 5.584936] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202J SB01 PQ: 0 ANSI: 5 [ 5.595136] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.595228] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 5.595313] scsi 3:0:0:0: Attached scsi generic sg2 type 5 [ 5.595398] scsi 5:0:0:0: Attached scsi generic sg3 type 5 [ 5.616302] Driver 'sd' needs updating - please use bus_type methods [ 5.616497] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.616570] sd 0:0:0:0: [sda] Write Protect is off [ 5.616616] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.616661] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.616818] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.616886] sd 0:0:0:0: [sda] Write Protect is off [ 5.616932] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.616973] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.617056] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 5.630941] sda1 sda2 < sda5<3>usb 1-8: device not accepting address 5, error -62 [ 5.653094] hub 1-0:1.0: unable to enumerate USB device on port 8 [ 5.658215] sda6 sda7 > [ 5.671458] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.671643] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 5.671720] sd 2:0:0:0: [sdb] Write Protect is off [ 5.671766] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.671819] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.671961] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 5.672034] sd 2:0:0:0: [sdb] Write Protect is off [ 5.672080] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.672131] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.672189] sdb: sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 > [ 5.737944] sd 2:0:0:0: [sdb] Attached SCSI disk [ 5.746398] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.746461] Uniform CD-ROM driver Revision: 3.20 [ 5.746630] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 5.750089] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.750275] sr 5:0:0:0: Attached scsi CD-ROM sr1 [ 6.174882] PM: Starting manual resume from disk [ 6.174931] PM: Resume from partition 8:21 [ 6.174933] PM: Checking hibernation image. [ 6.175152] PM: Resume from disk failed. [ 6.205407] EXT3-fs: INFO: recovery required on readonly filesystem. [ 6.205460] EXT3-fs: write access will be enabled during recovery. [ 15.497985] kjournald starting. Commit interval 5 seconds [ 15.498059] EXT3-fs: sda7: orphan cleanup on readonly fs [ 15.498110] ext3_orphan_cleanup: deleting unreferenced inode 2679874 [ 15.498166] ext3_orphan_cleanup: deleting unreferenced inode 2679872 [ 15.521840] ext3_orphan_cleanup: deleting unreferenced inode 2679870 [ 15.521856] ext3_orphan_cleanup: deleting unreferenced inode 2679869 [ 15.533748] ext3_orphan_cleanup: deleting unreferenced inode 2679863 [ 15.543553] ext3_orphan_cleanup: deleting unreferenced inode 2678931 [ 15.543727] EXT3-fs: sda7: 6 orphan inodes deleted [ 15.543773] EXT3-fs: recovery complete. [ 15.554538] EXT3-fs: mounted filesystem with ordered data mode. [ 21.112614] udevd version 124 started [ 21.429826] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 21.461054] ACPI: Power Button (FF) [PWRF] [ 21.461258] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 21.488039] i2c-adapter i2c-0: nForce2 SMBus adapter at 0xf800 [ 21.488129] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400 [ 21.493052] ACPI: Power Button (CM) [PWRB] [ 21.587930] parport_pc 00:0a: reported by Plug and Play ACPI [ 21.588040] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 22.387337] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 22.413430] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.745051] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 23.055260] nvidia: module license 'NVIDIA' taints kernel. [ 23.319334] nvidia 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 23.319408] nvidia 0000:05:00.0: setting latency timer to 64 [ 23.328034] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.82 Tue Nov 4 16:50:05 PST 2008 [ 23.443913] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 23.443968] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22 [ 23.444075] Intel ICH 0000:00:04.0: setting latency timer to 64 [ 23.535604] b43-phy0: Broadcom 4306 WLAN found [ 23.583671] phy0: Selected rate control algorithm 'pid' [ 23.691067] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ] [ 23.768071] intel8x0_measure_ac97_clock: measured 54647 usecs [ 23.768125] intel8x0: clocking to 46980 [ 23.820072] input: PS2++ Logitech MX Mouse as /devices/platform/i8042/serio1/input/input5 [ 25.061788] loop: module loaded [ 25.083613] lp0: using parport0 (interrupt-driven). [ 25.314753] Adding 4883720k swap on /dev/sdb5. Priority:-1 extents:1 across:4883720k [ 25.610286] EXT3 FS on sda7, internal journal [ 26.027018] type=1505 audit(1228507882.062:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4256 [ 26.205029] type=1505 audit(1228507882.238:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4261 [ 26.205289] type=1505 audit(1228507882.242:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4261 [ 26.320380] ip_tables: (C) 2000-2006 Netfilter Core Team