[ 0.000000] Linux version 2.6.24-2-generic (buildd@crested) (gcc version 4.2.3 20071210 (prerelease) (Ubuntu 4.2.2-4ubuntu1)) #1 SMP Thu Dec 20 17:58:55 GMT 2007 (Ubuntu 2.6.24-2.4-generic) [ 0.000000] Command line: root=UUID=72c04066-fcb9-401b-9a36-35c548067788 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003e0f8000 (usable) [ 0.000000] BIOS-e820: 000000003e0f8000 - 000000003e2f9000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003e2f9000 - 000000003eebe000 (ACPI data) [ 0.000000] BIOS-e820: 000000003eebe000 - 000000003eeef000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003eeef000 - 000000003ef00000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ef00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 254200) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FE020 checksum 0 [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) [ 0.000000] ACPI: XSDT 3EEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013) [ 0.000000] ACPI: FACP 3EEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F) [ 0.000000] ACPI: DSDT 3EEF0000, 41E4 (r1 APPLE MacBook 20001 INTL 20050309) [ 0.000000] ACPI: FACS 3EEC0000, 0040 [ 0.000000] ACPI: HPET 3EEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: APIC 3EEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: MCFG 3EEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ASF! 3EEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SBST 3EEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ECDT 3EEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SSDT 3EEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 3EEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309) [ 0.000000] ACPI: SSDT 3EEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003e0f8000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 254200) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000003e0f8000 [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 254200 [ 0.000000] On node 0 totalpages: 254103 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1184 pages reserved [ 0.000000] DMA zone: 2759 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3419 pages used for memmap [ 0.000000] DMA32 zone: 246685 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34528 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 249444 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=72c04066-fcb9-401b-9a36-35c548067788 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 22.526136] time.c: Detected 2161.247 MHz processor. [ 22.527666] Console: colour VGA+ 80x25 [ 22.527671] console [tty0] enabled [ 22.527692] Checking aperture... [ 22.527704] Calgary: detecting Calgary via BIOS EBDA area [ 22.527713] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 22.540937] Memory: 989620k/1016800k available (2412k kernel code, 26792k reserved, 1287k data, 312k init) [ 22.540978] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 22.619962] Calibrating delay using timer specific routine.. 4327.34 BogoMIPS (lpj=8654681) [ 22.620000] Security Framework initialized [ 22.620009] SELinux: Disabled at boot. [ 22.620013] Capability LSM initialized [ 22.620133] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 22.620866] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 22.621206] Mount-cache hash table entries: 256 [ 22.621346] CPU: L1 I cache: 32K, L1 D cache: 32K [ 22.621349] CPU: L2 cache: 4096K [ 22.621352] CPU 0/0 -> Node 0 [ 22.621353] using mwait in idle threads. [ 22.621355] CPU: Physical Processor ID: 0 [ 22.621357] CPU: Processor Core ID: 0 [ 22.621364] CPU0: Thermal monitoring enabled (TM2) [ 22.621380] SMP alternatives: switching to UP code [ 22.622215] Early unpacking initramfs... done [ 23.022924] ACPI: Core revision 20070126 [ 23.022965] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 23.065438] Using local APIC timer interrupts. [ 23.111633] APIC timer calibration result 10390601 [ 23.111635] Detected 10.390 MHz APIC timer. [ 23.111712] SMP alternatives: switching to SMP code [ 23.112418] Booting processor 1/2 APIC 0x1 [ 23.122971] Initializing CPU#1 [ 23.199491] Calibrating delay using timer specific routine.. 4322.54 BogoMIPS (lpj=8645084) [ 23.199499] CPU: L1 I cache: 32K, L1 D cache: 32K [ 23.199501] CPU: L2 cache: 4096K [ 23.199503] CPU 1/1 -> Node 0 [ 23.199504] CPU: Physical Processor ID: 0 [ 23.199505] CPU: Processor Core ID: 1 [ 23.199512] CPU1: Thermal monitoring enabled (TM2) [ 23.200063] Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 23.200131] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 23.220124] Brought up 2 CPUs [ 23.220210] CPU0 attaching sched-domain: [ 23.220213] domain 0: span 03 [ 23.220214] groups: 01 02 [ 23.220217] domain 1: span 03 [ 23.220219] groups: 03 [ 23.220221] CPU1 attaching sched-domain: [ 23.220222] domain 0: span 03 [ 23.220223] groups: 02 01 [ 23.220226] domain 1: span 03 [ 23.220227] groups: 03 [ 23.220458] net_namespace: 120 bytes [ 23.220869] Time: 21:58:00 Date: 01/03/08 [ 23.220895] NET: Registered protocol family 16 [ 23.221087] ACPI: bus type pci registered [ 23.221163] PCI: Using configuration type 1 [ 23.222261] ACPI: EC: EC description table is found, configuring boot EC [ 23.222449] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 23.223856] ACPI: System BIOS is requesting _OSI(Linux) [ 23.223858] ACPI: If "acpi_osi=Linux" works better, [ 23.223859] Please send dmidecode to linux-acpi@vger.kernel.org [ 23.224219] ACPI: Interpreter enabled [ 23.224221] ACPI: (supports S0 S3 S4 S5) [ 23.224235] ACPI: Using IOAPIC for interrupt routing [ 23.232592] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 23.232595] ACPI: EC: driver started in poll mode [ 23.233279] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 23.233459] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 23.234310] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 23.234314] PCI quirk: region 0500-053f claimed by ICH6 GPIO [ 23.235331] PCI: Transparent bridge - 0000:00:1e.0 [ 23.235391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 23.235685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 23.235799] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 23.235924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 23.242167] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 23.242251] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 23.242333] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 23.242415] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 23.242498] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 23.242581] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 23.242665] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 23.242747] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 23.242875] Linux Plug and Play Support v0.97 (c) Adam Belay [ 23.242904] pnp: PnP ACPI init [ 23.242913] ACPI: bus type pnp registered [ 23.245968] pnp: PnP ACPI: found 9 devices [ 23.245970] ACPI: ACPI bus type pnp unregistered [ 23.246210] PCI: Using ACPI for IRQ routing [ 23.246212] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 23.255447] NET: Registered protocol family 8 [ 23.255449] NET: Registered protocol family 20 [ 23.255482] PCI-GART: No AMD northbridge found. [ 23.255488] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 23.255491] hpet0: 3 64-bit timers, 14318180 Hz [ 23.259390] Time: tsc clocksource has been installed. [ 23.259397] Switched to high resolution mode on CPU 0 [ 23.260052] Switched to high resolution mode on CPU 1 [ 23.267372] system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 23.267375] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 23.267378] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 23.267380] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 23.267383] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 23.267386] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved [ 23.267392] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved [ 23.267398] system 00:07: ioport range 0x680-0x6ef has been reserved [ 23.267400] system 00:07: ioport range 0x800-0x80f has been reserved [ 23.267403] system 00:07: ioport range 0x810-0x817 has been reserved [ 23.267405] system 00:07: ioport range 0x400-0x47f has been reserved [ 23.267407] system 00:07: ioport range 0x500-0x53f has been reserved [ 23.267410] system 00:07: ioport range 0x1640-0x164f has been reserved [ 23.267820] PCI: Bridge: 0000:00:1c.0 [ 23.267823] IO window: 1000-1fff [ 23.267829] MEM window: 50200000-502fffff [ 23.267833] PREFETCH window: disabled. [ 23.267838] PCI: Bridge: 0000:00:1c.1 [ 23.267840] IO window: disabled. [ 23.267845] MEM window: 50100000-501fffff [ 23.267849] PREFETCH window: disabled. [ 23.267854] PCI: Bridge: 0000:00:1e.0 [ 23.267855] IO window: disabled. [ 23.267861] MEM window: 50000000-500fffff [ 23.267865] PREFETCH window: disabled. [ 23.267894] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 23.267900] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 23.267924] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 23.267929] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 23.267942] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 23.267951] NET: Registered protocol family 2 [ 23.303347] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 23.303743] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 23.304540] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 23.305011] TCP: Hash tables configured (established 131072 bind 65536) [ 23.305013] TCP reno registered [ 23.315403] checking if image is initramfs... it is [ 24.078843] Freeing initrd memory: 7964k freed [ 24.083876] audit: initializing netlink socket (disabled) [ 24.083902] audit(1199397480.504:1): initialized [ 24.086051] VFS: Disk quotas dquot_6.5.1 [ 24.086122] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 24.086263] AppArmor: Unable to register AppArmor [ 24.086340] io scheduler noop registered [ 24.086342] io scheduler anticipatory registered [ 24.086343] io scheduler deadline registered [ 24.086457] io scheduler cfq registered (default) [ 24.086474] Boot video device is 0000:00:02.0 [ 24.089089] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 24.089146] assign_interrupt_mode Found MSI capability [ 24.089195] Allocate Port Service[0000:00:1c.0:pcie00] [ 24.089239] Allocate Port Service[0000:00:1c.0:pcie02] [ 24.089341] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 24.089396] assign_interrupt_mode Found MSI capability [ 24.089440] Allocate Port Service[0000:00:1c.1:pcie00] [ 24.089475] Allocate Port Service[0000:00:1c.1:pcie02] [ 24.115155] Real Time Clock Driver v1.12ac [ 24.115377] hpet_resources: 0xfed00000 is busy [ 24.115403] Linux agpgart interface v0.102 [ 24.115406] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 24.116495] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 24.116562] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 24.116700] PNP: No PS/2 controller found. Probing ports directly. [ 24.117549] i8042.c: No controller found. [ 24.130922] mice: PS/2 mouse device common for all mice [ 24.130963] cpuidle: using governor ladder [ 24.130965] cpuidle: using governor menu [ 24.131039] TCP cubic registered [ 24.131093] NET: Registered protocol family 1 [ 24.131245] Magic number: 8:862:1004 [ 24.131249] hash matches device ttye3 [ 24.131323] hash matches device 00:06 [ 24.131336] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 24.131345] Freeing unused kernel memory: 312k freed [ 25.323492] fuse init (API version 7.9) [ 25.333116] ACPI: SSDT 3EEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309) [ 25.333304] ACPI: SSDT 3EEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309) [ 25.333570] Monitor-Mwait will be used to enter C-1 state [ 25.333573] Monitor-Mwait will be used to enter C-2 state [ 25.333575] Monitor-Mwait will be used to enter C-3 state [ 25.333687] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 25.333692] ACPI: Processor [CPU0] (supports 8 throttling states) [ 25.333923] ACPI: SSDT 3EEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309) [ 25.334101] ACPI: SSDT 3EEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309) [ 25.334445] Marking TSC unstable due to TSC halts in idle [ 25.334554] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 25.334558] ACPI: Processor [CPU1] (supports 8 throttling states) [ 25.335748] Time: hpet clocksource has been installed. [ 25.568213] usbcore: registered new interface driver usbfs [ 25.568240] usbcore: registered new interface driver hub [ 25.568621] usbcore: registered new device driver usb [ 25.569726] USB Universal Host Controller Interface driver v3.0 [ 25.569783] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 25.569794] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 25.569798] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 25.570040] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 25.570073] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080 [ 25.570191] usb usb1: configuration #1 chosen from 1 choice [ 25.570211] hub 1-0:1.0: USB hub found [ 25.570216] hub 1-0:1.0: 2 ports detected [ 25.640796] SCSI subsystem initialized [ 25.655076] libata version 3.00 loaded. [ 25.671296] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 25.671310] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 25.671314] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 25.671337] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 25.671370] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 [ 25.671469] usb usb2: configuration #1 chosen from 1 choice [ 25.671489] hub 2-0:1.0: USB hub found [ 25.671494] hub 2-0:1.0: 2 ports detected [ 25.775104] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 25.775115] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 25.775119] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 25.775141] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 25.775172] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 [ 25.775276] usb usb3: configuration #1 chosen from 1 choice [ 25.775300] hub 3-0:1.0: USB hub found [ 25.775305] hub 3-0:1.0: 2 ports detected [ 25.878922] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 25.878936] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 25.878940] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 25.878960] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 25.878992] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020 [ 25.879093] usb usb4: configuration #1 chosen from 1 choice [ 25.879113] hub 4-0:1.0: USB hub found [ 25.879118] hub 4-0:1.0: 2 ports detected [ 25.910784] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 25.982782] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21 [ 25.983983] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 25.983989] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 25.984037] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 25.987934] ehci_hcd 0000:00:1d.7: debug port 1 [ 25.987940] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 25.987946] ehci_hcd 0000:00:1d.7: irq 21, io mem 0x50445400 [ 26.035563] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.035675] usb usb5: configuration #1 chosen from 1 choice [ 26.035698] hub 5-0:1.0: USB hub found [ 26.035704] hub 5-0:1.0: 8 ports detected [ 26.064808] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 26.116864] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[50000000-500007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 26.128335] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 26.128376] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 26.128388] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 26.128415] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 26.128442] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 26.128452] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 26.133841] ata_piix 0000:00:1f.1: version 2.12 [ 26.133854] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 26.133884] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 26.134711] scsi0 : ata_piix [ 26.134868] scsi1 : ata_piix [ 26.134935] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20b0 irq 14 [ 26.134938] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20b8 irq 15 [ 26.160333] usb 1-2: device not accepting address 2, error -71 [ 26.168986] ata1.00: ATAPI: MATSHITADVD-R UJ-857E, ZB0E, max UDMA/66 [ 26.171864] Clocksource tsc unstable (delta = -387042374 ns) [ 26.184975] ata1.00: configured for UDMA/66 [ 26.214549] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857E ZB0E PQ: 0 ANSI: 5 [ 26.214656] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] [ 26.231913] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 26.231954] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 26.232051] scsi2 : ata_piix [ 26.232266] scsi3 : ata_piix [ 26.232347] ata3: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19 [ 26.232349] ata4: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19 [ 26.273827] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100 [ 26.273832] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 26.278984] ata3.01: configured for UDMA/100 [ 26.304333] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5 [ 26.310482] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 26.310495] sd 2:0:1:0: [sda] Write Protect is off [ 26.310497] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 26.310513] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.310558] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 26.310568] sd 2:0:1:0: [sda] Write Protect is off [ 26.310570] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 26.310585] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.310588] sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 26.317659] Uniform CD-ROM driver Revision: 3.20 [ 26.317722] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 26.382587] sda1 sda2 sda3 sda4 sda5 [ 26.382759] sd 2:0:1:0: [sda] Attached SCSI disk [ 26.386171] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 26.386188] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 26.388956] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffea3a338] [ 26.579581] usb 5-4: new high speed USB device using ehci_hcd and address 4 [ 26.709437] Attempting manual resume [ 26.709440] swsusp: Resume From Partition 8:5 [ 26.709442] PM: Checking swsusp image. [ 26.709716] PM: Resume from disk failed. [ 26.715722] usb 5-4: configuration #1 chosen from 1 choice [ 26.725481] EXT3-fs: INFO: recovery required on readonly filesystem. [ 26.725484] EXT3-fs: write access will be enabled during recovery. [ 27.430079] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 27.616807] usb 1-2: configuration #1 chosen from 1 choice [ 27.865324] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 28.032557] usb 2-1: configuration #1 chosen from 1 choice [ 28.272594] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 28.449855] usb 3-2: configuration #1 chosen from 1 choice [ 28.688883] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 28.868075] usb 4-1: configuration #1 chosen from 1 choice [ 28.871132] usbcore: registered new interface driver hiddev [ 28.874750] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input1 [ 28.892612] input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 28.896582] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2/input/input2 [ 28.919512] input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 28.934282] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input3 [ 28.943494] input,hidraw2: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-1 [ 28.948928] hiddev96hidraw3: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2 [ 28.966011] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input4 [ 28.975413] input,hidraw4: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 28.990083] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1/input/input5 [ 28.999393] input,hidraw5: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 28.999417] usbcore: registered new interface driver usbhid [ 28.999423] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 32.092249] kjournald starting. Commit interval 5 seconds [ 32.092275] EXT3-fs: sda4: orphan cleanup on readonly fs [ 32.092284] ext3_orphan_cleanup: deleting unreferenced inode 2551386 [ 32.113401] ext3_orphan_cleanup: deleting unreferenced inode 2550924 [ 32.141225] EXT3-fs: sda4: 2 orphan inodes deleted [ 32.141228] EXT3-fs: recovery complete. [ 32.146364] EXT3-fs: mounted filesystem with ordered data mode. [ 39.339560] input: Power Button (FF) as /devices/virtual/input/input6 [ 39.484289] ACPI: Power Button (FF) [PWRF] [ 39.484377] input: Lid Switch as /devices/virtual/input/input7 [ 39.484441] ACPI: Lid Switch [LID0] [ 39.484499] input: Power Button (CM) as /devices/virtual/input/input8 [ 39.506653] ACPI: Power Button (CM) [PWRB] [ 39.506733] input: Sleep Button (CM) as /devices/virtual/input/input9 [ 39.535051] ACPI: Sleep Button (CM) [SLPB] [ 39.540302] agpgart: Detected an Intel 945GM Chipset. [ 39.542179] agpgart: Detected 16124K stolen memory. [ 39.556830] agpgart: AGP aperture is 256M @ 0x40000000 [ 39.660040] intel_rng: FWH not detected [ 39.738035] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 39.814712] ACPI: AC Adapter [ADP1] (on-line) [ 39.846216] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 39.862310] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 39.970073] ACPI: Battery Slot [BAT0] (battery present) [ 39.970402] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 40.021328] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 40.034062] iTCO_vendor_support: vendor-support=0 [ 40.041887] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 40.041964] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460) [ 40.042000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 40.241037] ath_hal: module license 'Proprietary' taints kernel. [ 40.255085] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133) [ 40.460146] wlan: svn r3085 [ 40.514732] ath_pci: svn r3085 [ 40.514793] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 40.514806] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 40.646496] ath_pci: switching rfkill capability off [ 40.683854] appletouch: Geyser mode initialized. [ 40.683912] input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input12 [ 40.732047] usbcore: registered new interface driver appletouch [ 40.738284] ath_rate_sample: 1.2 (svn r3085) [ 40.739146] ath_pci: switching per-packet transmit power control off [ 40.739450] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 40.739457] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 40.739460] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 40.739468] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 40.739473] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 40.739477] wifi0: mac 12.10 phy 8.1 radio 12.0 [ 40.739481] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 40.739483] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 40.739485] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 40.739486] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 40.739488] wifi0: Use hw queue 8 for CAB traffic [ 40.739489] wifi0: Use hw queue 9 for beacons [ 40.831749] usbcore: registered new interface driver appleir [ 40.831754] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/mactel/appleir.c: v1.1:USB Apple MacMini IR Receiver driver [ 40.854625] Linux video capture interface: v2.00 [ 40.885532] wifi0: Atheros 5418: mem=0x50100000, irq=17 [ 40.885807] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 40.885821] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 40.886838] sky2 0000:01:00.0: v1.20 addr 0x50200000 irq 16 Yukon-EC (0xb6) rev 2 [ 40.888154] sky2 eth0: addr 00:17:f2:df:89:b5 [ 41.118666] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 41.119791] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 41.211190] sky2 eth0: enabling interface [ 41.223363] uvcvideo: iSight: firmware file AppleUSBVideoSupport not found. [ 41.223394] usbcore: registered new interface driver isight [ 41.223397] USB Video Class driver (v0.1.0) [ 41.284026] hda_codec: STAC922x, Apple subsys_id=106b2200 [ 42.002160] lp: driver loaded but no devices found [ 42.151473] ndiswrapper version 1.45 loaded (smp=yes) [ 42.195234] NET: Registered protocol family 17 [ 42.210513] usbcore: registered new interface driver ndiswrapper [ 42.253784] applesmc: Apple MacBook detected: [ 42.253787] applesmc: - Model with accelerometer [ 42.253788] applesmc: - Model without light sensors and backlight [ 42.253790] applesmc: - Model with 10 temperature sensors [ 42.298038] applesmc: device successfully initialized (0xe0, 0x00). [ 42.298041] applesmc: device successfully initialized. [ 42.298319] applesmc: 1 fans found. [ 42.299172] input: applesmc as /devices/platform/applesmc.768/input/input13 [ 42.325184] applesmc: driver successfully loaded. [ 42.457093] Adding 2136636k swap on /dev/sda5. Priority:-1 extents:1 across:2136636k [ 42.727528] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 42.754455] EXT3 FS on sda4, internal journal [ 43.404756] kjournald starting. Commit interval 5 seconds [ 43.405139] EXT3 FS on sda3, internal journal [ 43.405146] EXT3-fs: mounted filesystem with ordered data mode. [ 43.713652] prism2usb_init: prism2_usb.o: 0.2.8 Loaded [ 43.713656] prism2usb_init: dev_info is: prism2_usb [ 43.713691] usbcore: registered new interface driver prism2_usb [ 44.729444] No dock devices found. [ 44.736419] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 45.602136] NET: Registered protocol family 10 [ 45.602337] lo: Disabled Privacy Extensions [ 46.230637] ppdev: user-space parallel port driver [ 46.525935] appletouch: incomplete data package (first byte: 2, length: 4). [ 49.927916] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 [ 49.947497] usb 4-1: USB disconnect, address 2 [ 49.967628] Bluetooth: Core ver 2.11 [ 49.967711] NET: Registered protocol family 31 [ 49.967714] Bluetooth: HCI device and connection manager initialized [ 49.967720] Bluetooth: HCI socket layer initialized [ 50.010172] Bluetooth: L2CAP ver 2.9 [ 50.010178] Bluetooth: L2CAP socket layer initialized [ 50.027992] Bluetooth: RFCOMM socket layer initialized [ 50.028005] Bluetooth: RFCOMM TTY layer initialized [ 50.028007] Bluetooth: RFCOMM ver 1.8 [ 50.285840] usb 4-1: new full speed USB device using uhci_hcd and address 3 [ 50.304478] usb 4-1: configuration #1 chosen from 1 choice [ 50.408241] Bluetooth: HCI USB driver ver 2.9 [ 50.411542] usbcore: registered new interface driver hci_usb [ 53.800071] [drm] Initialized drm 1.1.0 20060810 [ 53.802593] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 53.802660] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 54.355027] eth0: no IPv6 routers present [ 54.396681] ath0: no IPv6 routers present [ 74.401339] CPU0 attaching NULL sched-domain. [ 74.401347] CPU1 attaching NULL sched-domain. [ 74.418188] CPU0 attaching sched-domain: [ 74.418197] domain 0: span 03 [ 74.418200] groups: 01 02 [ 74.418205] domain 1: span 03 [ 74.418208] groups: 03 [ 74.418211] CPU1 attaching sched-domain: [ 74.418214] domain 0: span 03 [ 74.418217] groups: 02 01 [ 74.418221] domain 1: span 03 [ 74.418223] groups: 03 [ 788.525531] npviewer.bin[8780]: segfault at 1 rip f7af9ca0 rsp f5af5c50 error 4 [ 788.525539] npviewer.bin[8767]: segfault at 1 rip f7af9ca0 rsp ffe43ef0 error 4