[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed0000 (usable) [ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fedf000 - 000000007ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6810 [ 0.000000] Entering add_active_range(0, 0, 523984) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523984 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523984 [ 0.000000] On node 0 totalpages: 523984 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292307 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F67E0 checksum 0 [ 0.000000] ACPI: RSDP 000F67E0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 7FED1545, 0084 (r1 LENOVO TP-79 2170 LTP 0) [ 0.000000] ACPI: FACP 7FED1600, 00F4 (r3 LENOVO TP-79 2170 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 7FED195E, D3C2 (r1 LENOVO TP-79 2170 MSFT 100000E) [ 0.000000] ACPI: FACS 7FEF4000, 0040 [ 0.000000] ACPI: SSDT 7FED17B4, 01AA (r1 LENOVO TP-79 2170 MSFT 100000E) [ 0.000000] ACPI: ECDT 7FEDED20, 0052 (r1 LENOVO TP-79 2170 LNVO 1) [ 0.000000] ACPI: TCPA 7FEDED72, 0032 (r2 LENOVO TP-79 2170 LNVO 1) [ 0.000000] ACPI: APIC 7FEDEDA4, 0068 (r1 LENOVO TP-79 2170 LNVO 1) [ 0.000000] ACPI: MCFG 7FEDEE0C, 003C (r1 LENOVO TP-79 2170 LNVO 1) [ 0.000000] ACPI: HPET 7FEDEE48, 0038 (r1 LENOVO TP-79 2170 LNVO 1) [ 0.000000] ACPI: BOOT 7FEDEFD8, 0028 (r1 LENOVO TP-79 2170 LTP 1) [ 0.000000] ACPI: SSDT 7FEF2697, 025F (r1 LENOVO TP-79 2170 INTL 20050513) [ 0.000000] ACPI: SSDT 7FEF28F6, 00A6 (r1 LENOVO TP-79 2170 INTL 20050513) [ 0.000000] ACPI: SSDT 7FEF299C, 04F7 (r1 LENOVO TP-79 2170 INTL 20050513) [ 0.000000] ACPI: SSDT 7FEF2E93, 01D8 (r1 LENOVO TP-79 2170 INTL 20050513) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519891 [ 0.000000] Kernel command line: root=/dev/mapper/vg_slow-usr ro quiet vga=793 [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2161.346 MHz processor. [ 24.524004] Console: colour dummy device 80x25 [ 24.524008] console [tty0] enabled [ 24.524243] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 24.524542] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 24.626320] Memory: 2065468k/2095936k available (2157k kernel code, 29188k reserved, 998k data, 364k init, 1178432k highmem) [ 24.626327] virtual kernel memory layout: [ 24.626328] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 24.626329] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 24.626330] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 24.626331] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 24.626332] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 24.626333] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 24.626334] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 24.626337] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 24.626374] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 24.626495] hpet clockevent registered [ 24.706366] Calibrating delay using timer specific routine.. 4327.28 BogoMIPS (lpj=8654578) [ 24.706387] Security Framework initialized [ 24.706394] SELinux: Disabled at boot. [ 24.706407] AppArmor: AppArmor initialized [ 24.706410] Failure registering capabilities with primary security module. [ 24.706417] Mount-cache hash table entries: 512 [ 24.706532] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 24.706540] monitor/mwait feature present. [ 24.706541] using mwait in idle threads. [ 24.706545] CPU: L1 I cache: 32K, L1 D cache: 32K [ 24.706547] CPU: L2 cache: 2048K [ 24.706549] CPU: Physical Processor ID: 0 [ 24.706550] CPU: Processor Core ID: 0 [ 24.706552] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 24.706560] Compat vDSO mapped to ffffe000. [ 24.706571] Checking 'hlt' instruction... OK. [ 24.722663] SMP alternatives: switching to UP code [ 24.724124] Early unpacking initramfs... done [ 25.024270] ACPI: Core revision 20070126 [ 25.024351] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 25.051145] CPU0: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08 [ 25.051160] SMP alternatives: switching to SMP code [ 25.051720] Booting processor 1/1 eip 3000 [ 25.062178] Initializing CPU#1 [ 25.141907] Calibrating delay using timer specific routine.. 4322.55 BogoMIPS (lpj=8645111) [ 25.141913] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 25.141918] monitor/mwait feature present. [ 25.141921] CPU: L1 I cache: 32K, L1 D cache: 32K [ 25.141922] CPU: L2 cache: 2048K [ 25.141924] CPU: Physical Processor ID: 0 [ 25.141925] CPU: Processor Core ID: 1 [ 25.141927] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 25.142112] CPU1: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08 [ 25.142132] Total of 2 processors activated (8649.84 BogoMIPS). [ 25.142325] ENABLING IO-APIC IRQs [ 25.142513] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 25.289474] checking TSC synchronization [CPU#0 -> CPU#1]: [ 25.309447] Measured 615719 cycles TSC warp between CPUs, turning off TSC clock. [ 25.309449] Marking TSC unstable due to: check_tsc_sync_source failed. [ 25.309461] Brought up 2 CPUs [ 25.309484] CPU0 attaching sched-domain: [ 25.309486] domain 0: span 03 [ 25.309488] groups: 01 02 [ 25.309490] CPU1 attaching sched-domain: [ 25.309492] domain 0: span 03 [ 25.309493] groups: 02 01 [ 25.309988] net_namespace: 64 bytes [ 25.309994] Booting paravirtualized kernel on bare hardware [ 25.310400] Time: 20:04:53 Date: 04/17/08 [ 25.310424] NET: Registered protocol family 16 [ 25.310594] EISA bus registered [ 25.310598] ACPI: bus type pci registered [ 25.310778] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24 [ 25.310780] PCI: Using configuration type 1 [ 25.310782] Setting up standard PCI resources [ 25.314230] ACPI: EC: EC description table is found, configuring boot EC [ 25.320969] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 25.325734] ACPI: Interpreter enabled [ 25.325737] ACPI: (supports S0 S3 S4 S5) [ 25.325748] ACPI: Using IOAPIC for interrupt routing [ 25.333922] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 25.333925] ACPI: EC: driver started in poll mode [ 25.334074] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 25.334807] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 25.334811] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 25.336141] PCI: Transparent bridge - 0000:00:1e.0 [ 25.336231] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 25.336378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 25.336479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 25.336584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 25.336689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 25.336796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 25.336902] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 25.339315] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 25.339493] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 25.339668] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 25.339843] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 25.340018] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 25.340193] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 25.340368] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 25.340543] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 25.340696] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 25.340788] ACPI: Power Resource [PUBS] (on) [ 25.340839] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.340866] pnp: PnP ACPI init [ 25.340872] ACPI: bus type pnp registered [ 25.341910] pnpacpi: exceeded the max number of mem resources: 12 [ 25.344982] pnp: PnP ACPI: found 14 devices [ 25.344984] ACPI: ACPI bus type pnp unregistered [ 25.344986] PnPBIOS: Disabled by ACPI PNP [ 25.345475] PCI: Using ACPI for IRQ routing [ 25.345477] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.421555] NET: Registered protocol family 8 [ 25.421557] NET: Registered protocol family 20 [ 25.421588] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 25.421591] hpet0: 3 64-bit timers, 14318180 Hz [ 25.422621] AppArmor: AppArmor Filesystem Enabled [ 25.425149] Time: hpet clocksource has been installed. [ 25.425166] Switched to high resolution mode on CPU 0 [ 25.425547] Switched to high resolution mode on CPU 1 [ 25.438127] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 25.438130] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 25.438132] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 25.438135] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 25.438137] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 25.438140] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 25.438142] system 00:00: iomem range 0x0-0x0 could not be reserved [ 25.438144] system 00:00: iomem range 0x0-0x0 could not be reserved [ 25.438147] system 00:00: iomem range 0xdc000-0xdffff has been reserved [ 25.438149] system 00:00: iomem range 0xe0000-0xe3fff has been reserved [ 25.438151] system 00:00: iomem range 0xe4000-0xe7fff has been reserved [ 25.438154] system 00:00: iomem range 0xe8000-0xebfff has been reserved [ 25.438159] system 00:02: ioport range 0x164e-0x164f has been reserved [ 25.438161] system 00:02: ioport range 0x1000-0x107f has been reserved [ 25.438164] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 25.438166] system 00:02: ioport range 0x800-0x80f has been reserved [ 25.438168] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 25.438171] system 00:02: ioport range 0x1600-0x165f could not be reserved [ 25.438174] system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 25.438176] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 25.438179] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 25.438182] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 25.438184] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved [ 25.468528] PCI: Bridge: 0000:00:01.0 [ 25.468531] IO window: 2000-2fff [ 25.468534] MEM window: ee100000-ee1fffff [ 25.468536] PREFETCH window: d0000000-dfffffff [ 25.468540] PCI: Bridge: 0000:00:1c.0 [ 25.468542] IO window: 3000-3fff [ 25.468547] MEM window: ee000000-ee0fffff [ 25.468551] PREFETCH window: disabled. [ 25.468557] PCI: Bridge: 0000:00:1c.1 [ 25.468559] IO window: 4000-5fff [ 25.468564] MEM window: ec000000-edffffff [ 25.468569] PREFETCH window: e4000000-e40fffff [ 25.468573] PCI: Bridge: 0000:00:1c.2 [ 25.468576] IO window: 6000-7fff [ 25.468581] MEM window: e8000000-e9ffffff [ 25.468585] PREFETCH window: e4100000-e41fffff [ 25.468591] PCI: Bridge: 0000:00:1c.3 [ 25.468593] IO window: 8000-9fff [ 25.468599] MEM window: ea000000-ebffffff [ 25.468602] PREFETCH window: e4200000-e42fffff [ 25.468609] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 25.468611] IO window: 0000a000-0000a0ff [ 25.468616] IO window: 0000a400-0000a4ff [ 25.468621] PREFETCH window: e0000000-e3ffffff [ 25.468627] MEM window: 88000000-8bffffff [ 25.468632] PCI: Bridge: 0000:00:1e.0 [ 25.468634] IO window: a000-dfff [ 25.468639] MEM window: e4300000-e7ffffff [ 25.468643] PREFETCH window: e0000000-e3ffffff [ 25.468659] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 25.468663] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 25.468685] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17 [ 25.468690] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 25.468712] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18 [ 25.468717] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 25.468738] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19 [ 25.468744] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 25.468765] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20 [ 25.468770] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 25.468781] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 25.468786] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 25.468804] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 25.468817] NET: Registered protocol family 2 [ 25.513013] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 25.513193] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 25.513776] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 25.514064] TCP: Hash tables configured (established 131072 bind 65536) [ 25.514066] TCP reno registered [ 25.525072] checking if image is initramfs... it is [ 26.118800] Freeing initrd memory: 7839k freed [ 26.118943] Simple Boot Flag at 0x35 set to 0x1 [ 26.119810] audit: initializing netlink socket (disabled) [ 26.119822] audit(1208462693.348:1): initialized [ 26.119745] highmem bounce pool size: 64 pages [ 26.121464] VFS: Disk quotas dquot_6.5.1 [ 26.121529] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 26.121648] io scheduler noop registered [ 26.121650] io scheduler anticipatory registered [ 26.121652] io scheduler deadline registered [ 26.121661] io scheduler cfq registered (default) [ 26.121762] Boot video device is 0000:01:00.0 [ 26.121855] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 26.121885] assign_interrupt_mode Found MSI capability [ 26.121910] Allocate Port Service[0000:00:01.0:pcie00] [ 26.121978] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 26.122031] assign_interrupt_mode Found MSI capability [ 26.122073] Allocate Port Service[0000:00:1c.0:pcie00] [ 26.122103] Allocate Port Service[0000:00:1c.0:pcie02] [ 26.122195] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 26.122247] assign_interrupt_mode Found MSI capability [ 26.122289] Allocate Port Service[0000:00:1c.1:pcie00] [ 26.122320] Allocate Port Service[0000:00:1c.1:pcie02] [ 26.122412] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 26.122466] assign_interrupt_mode Found MSI capability [ 26.122507] Allocate Port Service[0000:00:1c.2:pcie00] [ 26.122537] Allocate Port Service[0000:00:1c.2:pcie02] [ 26.122629] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 26.122682] assign_interrupt_mode Found MSI capability [ 26.122724] Allocate Port Service[0000:00:1c.3:pcie00] [ 26.122752] Allocate Port Service[0000:00:1c.3:pcie02] [ 26.122985] isapnp: Scanning for PnP cards... [ 26.477551] isapnp: No Plug & Play device found [ 26.501097] Real Time Clock Driver v1.12ac [ 26.501188] hpet_resources: 0xfed00000 is busy [ 26.501230] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 26.502118] serial 00:0a: activated [ 26.502370] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 26.503061] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 26.503118] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 26.503206] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 26.513143] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.513148] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 26.531271] mice: PS/2 mouse device common for all mice [ 26.531367] EISA: Probing bus 0 at eisa.0 [ 26.531374] Cannot allocate resource for EISA slot 1 [ 26.531376] Cannot allocate resource for EISA slot 2 [ 26.531378] Cannot allocate resource for EISA slot 3 [ 26.531380] Cannot allocate resource for EISA slot 4 [ 26.531382] Cannot allocate resource for EISA slot 5 [ 26.531383] Cannot allocate resource for EISA slot 6 [ 26.531385] Cannot allocate resource for EISA slot 7 [ 26.531387] Cannot allocate resource for EISA slot 8 [ 26.531388] EISA: Detected 0 cards. [ 26.531391] cpuidle: using governor ladder [ 26.531393] cpuidle: using governor menu [ 26.531465] NET: Registered protocol family 1 [ 26.531490] Using IPI No-Shortcut mode [ 26.531517] registered taskstats version 1 [ 26.531615] Magic number: 4:898:93 [ 26.531674] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 26.531676] EDD information not available. [ 26.531837] Freeing unused kernel memory: 364k freed [ 26.536089] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 26.610804] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 5120k, total 16384k [ 26.610807] vesafb: mode is 1280x1024x16, linelength=2560, pages=5 [ 26.610809] vesafb: protected mode interface info at c000:afd4 [ 26.610812] vesafb: pmi: set display start = c00cb05c, set palette = c00cb118 [ 26.610813] vesafb: scrolling: redraw [ 26.610815] vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0 [ 26.610923] Console: switching to colour frame buffer device 160x64 [ 26.650985] fb0: VESA VGA frame buffer device [ 26.768719] fuse init (API version 7.9) [ 26.782157] ACPI: SSDT 7FEF1D36, 0282 (r1 PmRef Cpu0Ist 100 INTL 20050513) [ 26.782404] ACPI: SSDT 7FEF203D, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513) [ 26.784965] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 26.784969] ACPI: Processor [CPU0] (supports 8 throttling states) [ 26.785155] ACPI: SSDT 7FEF1C6E, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) [ 26.785382] ACPI: SSDT 7FEF1FB8, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) [ 26.787076] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 26.787080] ACPI: Processor [CPU1] (supports 8 throttling states) [ 26.789309] ACPI: Thermal Zone [THM0] (77 C) [ 26.790622] ACPI: Thermal Zone [THM1] (79 C) [ 26.804937] device-mapper: uevent: version 1.0.3 [ 26.805000] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 27.110796] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 27.110799] Copyright (c) 1999-2006 Intel Corporation. [ 27.110920] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 27.110935] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 27.157864] usbcore: registered new interface driver usbfs [ 27.157884] usbcore: registered new interface driver hub [ 27.168809] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:15:58:2d:74:0a [ 27.176139] usbcore: registered new device driver usb [ 27.177318] SCSI subsystem initialized [ 27.177784] USB Universal Host Controller Interface driver v3.0 [ 27.211256] libata version 3.00 loaded. [ 27.225685] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 27.226005] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 27.226018] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 27.226022] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 27.226257] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 27.226294] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 27.226414] usb usb1: configuration #1 chosen from 1 choice [ 27.226444] hub 1-0:1.0: USB hub found [ 27.226450] hub 1-0:1.0: 2 ports detected [ 27.331130] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 27.331142] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 27.331146] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 27.331166] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 27.331197] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 27.331292] usb usb2: configuration #1 chosen from 1 choice [ 27.331313] hub 2-0:1.0: USB hub found [ 27.331317] hub 2-0:1.0: 2 ports detected [ 27.434949] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 27.434959] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 27.434964] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 27.434984] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 27.435016] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 [ 27.435110] usb usb3: configuration #1 chosen from 1 choice [ 27.435131] hub 3-0:1.0: USB hub found [ 27.435135] hub 3-0:1.0: 2 ports detected [ 27.533260] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 [ 27.533271] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 27.533275] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 27.533295] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 27.533325] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 [ 27.533419] usb usb4: configuration #1 chosen from 1 choice [ 27.533438] hub 4-0:1.0: USB hub found [ 27.533442] hub 4-0:1.0: 2 ports detected [ 27.540933] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 27.555820] ahci 0000:00:1f.2: version 3.0 [ 27.555846] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 27.555894] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x1) don't match, using nr_ports [ 27.555896] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf [ 27.610874] usb 1-1: configuration #1 chosen from 1 choice [ 27.617063] Clocksource tsc unstable (delta = -148223674 ns) [ 27.677387] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 27.707673] usb 3-2: configuration #1 chosen from 1 choice [ 27.708904] hub 3-2:1.0: USB hub found [ 27.711156] hub 3-2:1.0: 4 ports detected [ 27.802697] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 27.833064] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode [ 27.833068] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 27.833073] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 27.833334] scsi0 : ahci [ 27.833519] scsi1 : ahci [ 27.833638] scsi2 : ahci [ 27.833761] scsi3 : ahci [ 27.833820] ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 218 [ 27.833824] ata2: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404580 irq 218 [ 27.833827] ata3: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404600 irq 218 [ 27.833830] ata4: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404680 irq 218 [ 27.838074] usb 4-1: configuration #1 chosen from 1 choice [ 27.907915] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 27.981167] usb 4-2: configuration #1 chosen from 1 choice [ 27.987625] usbcore: registered new interface driver hiddev [ 28.000732] input: Hagstrom Electronics, Inc David Abrahams Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input2 [ 28.005144] input,hidraw0: USB HID v1.00 Keyboard [Hagstrom Electronics, Inc David Abrahams Keyboard] on usb-0000:00:1d.0-1 [ 28.005160] usbcore: registered new interface driver usbhid [ 28.005163] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 28.013063] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 28.014450] ata1.00: ATA-7: HTS721010G9SA00, MCZIC10H, max UDMA/100 [ 28.014453] ata1.00: 195371568 sectors, multi 16: LBA48 [ 28.015825] ata1.00: configured for UDMA/100 [ 28.084043] ata2: SATA link down (SStatus 0 SControl 0) [ 28.151591] ata3: SATA link down (SStatus 0 SControl 0) [ 28.219261] ata4: SATA link down (SStatus 0 SControl 0) [ 28.219144] scsi 0:0:0:0: Direct-Access ATA HTS721010G9SA00 MCZI PQ: 0 ANSI: 5 [ 28.219991] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 [ 28.220004] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 28.220008] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 28.220033] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 28.223950] ehci_hcd 0000:00:1d.7: debug port 1 [ 28.223956] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 28.223963] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee404000 [ 28.228918] Driver 'sd' needs updating - please use bus_type methods [ 28.231824] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 28.231927] usb usb5: configuration #1 chosen from 1 choice [ 28.231949] hub 5-0:1.0: USB hub found [ 28.231954] hub 5-0:1.0: 8 ports detected [ 28.231732] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 28.231743] sd 0:0:0:0: [sda] Write Protect is off [ 28.231746] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.231760] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.231801] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 28.231809] sd 0:0:0:0: [sda] Write Protect is off [ 28.231811] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.231827] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.231830] sda:<6>usb 1-1: USB disconnect, address 2 [ 28.334401] ata_piix 0000:00:1f.1: version 2.12 [ 28.334422] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 28.334457] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 28.334939] scsi4 : ata_piix [ 28.335339] scsi5 : ata_piix [ 28.335975] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 [ 28.335977] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 [ 28.418200] usb 3-2: USB disconnect, address 2 [ 28.545972] usb 4-1: USB disconnect, address 2 [ 28.560313] sda1 sda2 sda3 sda4 [ 28.560414] sd 0:0:0:0: [sda] Attached SCSI disk [ 28.564889] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 28.654676] ata5.00: ATAPI: MATSHITADVD-RAM UJ-842, RB01, max UDMA/33 [ 28.673759] usb 4-2: USB disconnect, address 3 [ 28.826269] ata5.00: configured for UDMA/33 [ 28.826358] ata6: port disabled. ignoring. [ 28.828056] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-842 RB01 PQ: 0 ANSI: 5 [ 28.828136] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 28.837939] Driver 'sr' needs updating - please use bus_type methods [ 28.844597] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 28.844600] Uniform CD-ROM driver Revision: 3.20 [ 28.844641] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 29.221765] usb 5-6: new high speed USB device using ehci_hcd and address 3 [ 29.353972] usb 5-6: configuration #1 chosen from 1 choice [ 29.354568] hub 5-6:1.0: USB hub found [ 29.354345] hub 5-6:1.0: 4 ports detected [ 30.175807] usb 1-1: new low speed USB device using uhci_hcd and address 3 [ 30.356969] usb 1-1: configuration #1 chosen from 1 choice [ 30.382057] input: Hagstrom Electronics, Inc David Abrahams Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input3 [ 30.407439] input,hidraw0: USB HID v1.00 Keyboard [Hagstrom Electronics, Inc David Abrahams Keyboard] on usb-0000:00:1d.0-1 [ 30.650978] usb 4-1: new full speed USB device using uhci_hcd and address 4 [ 30.820278] usb 4-1: configuration #1 chosen from 1 choice [ 31.058267] usb 4-2: new full speed USB device using uhci_hcd and address 5 [ 31.230586] usb 4-2: configuration #1 chosen from 1 choice [ 31.476122] Attempting manual resume [ 31.476126] swsusp: Resume From Partition 254:0 [ 31.476127] PM: Checking swsusp image. [ 31.479965] PM: Resume from disk failed. [ 31.486393] JFS: nTxBlock = 8192, nTxLock = 65536 [ 41.919668] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 42.080709] iTCO_vendor_support: vendor-support=0 [ 42.133251] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 42.133337] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 42.133373] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 42.281960] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 42.348302] parport_pc 00:0b: reported by Plug and Play ACPI [ 42.348365] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 42.372846] Non-volatile memory driver v1.2 [ 42.428105] Linux agpgart interface v0.102 [ 42.484372] input: Power Button (FF) as /devices/virtual/input/input5 [ 42.528250] irda_init() [ 42.528267] NET: Registered protocol family 23 [ 42.536192] ACPI: Power Button (FF) [PWRF] [ 42.536250] input: Lid Switch as /devices/virtual/input/input6 [ 42.568051] ACPI: Lid Switch [LID] [ 42.568106] input: Sleep Button (CM) as /devices/virtual/input/input7 [ 42.592022] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 42.620034] ACPI: Sleep Button (CM) [SLPB] [ 42.651863] thinkpad_acpi: ThinkPad ACPI Extras v0.17 [ 42.651866] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 42.651868] thinkpad_acpi: ThinkPad BIOS 79ETD7WW (2.17 ), EC 79HT50WW-1.07 [ 42.651870] thinkpad_acpi: Lenovo ThinkPad T60p [ 42.652456] thinkpad_acpi: radio switch found; radios are enabled [ 42.656834] thinkpad_acpi: standard ACPI backlight interface available, not loading native one... [ 42.657084] input: ThinkPad Extra Buttons as /devices/virtual/input/input8 [ 42.704608] intel_rng: FWH not detected [ 42.786630] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9 [ 42.838375] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 42.839971] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input10 [ 42.841163] nsc-ircc 00:0c: activated [ 42.841167] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 42.841191] nsc-ircc, chip->init [ 42.841204] nsc-ircc, Found chip at base=0x164e [ 42.841249] nsc-ircc, driver loaded (Dag Brattli) [ 42.841476] IrDA: Registered device irda0 [ 42.841478] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 42.841521] nsc-ircc, chip->init [ 42.841538] nsc-ircc, Found chip at base=0x02e [ 42.841580] nsc-ircc, driver loaded (Dag Brattli) [ 42.841582] nsc_ircc_open(), can't get iobase of 0x2f8 [ 42.841597] nsc-ircc, chip->init [ 42.851393] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012] [ 42.851419] Yenta: Using INTVAL to route CSC interrupts to PCI [ 42.851420] Yenta: Routing CardBus interrupts to PCI [ 42.851426] Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64 [ 42.902260] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 43.031399] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 43.049378] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes. [ 43.049410] [fglrx] ASYNCIO init succeed! [ 43.050363] [fglrx] PAT is enabled successfully! [ 43.050384] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0 [ 43.082662] Yenta: ISA IRQ mask 0x0c70, PCI irq 16 [ 43.082666] Socket status: 30000007 [ 43.082670] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff [ 43.082672] cs: IO port probe 0xa000-0xdfff: clean. [ 43.083581] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [ 43.083584] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [ 43.601875] ACPI: Battery Slot [BAT0] (battery present) [ 43.696211] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 43.696216] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 43.739040] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 44.063881] Bluetooth: Core ver 2.11 [ 44.087022] NET: Registered protocol family 31 [ 44.087025] Bluetooth: HCI device and connection manager initialized [ 44.087028] Bluetooth: HCI socket layer initialized [ 44.299683] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 44.299687] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 44.299837] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21 [ 44.299852] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 44.299878] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 44.726705] ACPI: AC Adapter [AC] (on-line) [ 44.952092] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 44.953538] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 45.140762] Bluetooth: HCI USB driver ver 2.9 [ 45.142567] usbcore: registered new interface driver hci_usb [ 45.490989] cs: IO port probe 0x100-0x3af: clean. [ 45.493198] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 45.494101] cs: IO port probe 0x820-0x8ff: clean. [ 45.494885] cs: IO port probe 0xc00-0xcf7: clean. [ 45.495803] cs: IO port probe 0xa00-0xaff: clean. [ 45.776311] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21 [ 45.776317] hda_intel: probe_mask set to 0x1 for device 17aa:2010 [ 45.776334] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 45.924344] loop: module loaded [ 45.952089] lp0: using parport0 (interrupt-driven). [ 46.029165] Adding 4194296k swap on /dev/mapper/vg_fast-swap. Priority:-1 extents:1 across:4194296k [ 47.307392] kjournald starting. Commit interval 5 seconds [ 47.311414] EXT3 FS on sda1, internal journal [ 47.311418] EXT3-fs: mounted filesystem with ordered data mode. [ 48.131933] ip_tables: (C) 2000-2006 Netfilter Core Team [ 49.061459] ACPI: ACPI Dock Station Driver [ 49.062978] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay [ 49.062984] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler [ 49.063010] ACPI: Error installing bay notify handler [ 49.063013] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added [ 49.271530] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 49.492724] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input12 [ 50.833726] apm: BIOS not found. [ 51.171571] ppdev: user-space parallel port driver [ 51.570303] audit(1208462720.879:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5750 profile="/usr/sbin/cupsd" namespace="default" [ 52.766425] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 52.829324] Bluetooth: L2CAP ver 2.9 [ 52.829331] Bluetooth: L2CAP socket layer initialized [ 52.971732] Bluetooth: RFCOMM socket layer initialized [ 52.971751] Bluetooth: RFCOMM TTY layer initialized [ 52.971754] Bluetooth: RFCOMM ver 1.8 [ 54.849930] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 56.064466] NET: Registered protocol family 17 [ 57.146552] [fglrx] Reserve Block - 0 offset = 0Xfffb000 length = 0X5000 [ 57.146559] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 [ 57.146561] [fglrx] Reserve Block - 2 offset = 0Xffbb000 length = 0X40000 [ 57.222793] [fglrx] interrupt source 10000000 successfully enabled [ 57.222800] [fglrx] enable ID = 0x00000008 [ 57.222809] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 58.276702] NET: Registered protocol family 10 [ 58.277172] lo: Disabled Privacy Extensions [ 58.280469] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 64.841016] eth0: no IPv6 routers present [ 139.911593] CPU0 attaching NULL sched-domain. [ 139.911603] CPU1 attaching NULL sched-domain. [ 139.939781] CPU0 attaching sched-domain: [ 139.939792] domain 0: span 03 [ 139.939797] groups: 01 02 [ 139.939804] CPU1 attaching sched-domain: [ 139.939808] domain 0: span 03 [ 139.939811] groups: 02 01 [ 147.697887] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 147.698854] input: Logitech MX1000 mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/hci0/acl00076135FEA9/input/input13 [ 209.664170] [fglrx] interrupt source 10000000 successfully disabled! [ 209.664175] [fglrx] enable ID = 0x00000000 [ 209.664177] [fglrx] Receive disable interrupt message with irqEnableMask: 10000000; dwIRQEnableId: 00000008 [ 212.064939] [fglrx] PCIe has already been initialized. Reinitializing ... [ 212.083288] [fglrx] Reserve Block - 0 offset = 0Xfffb000 length = 0X5000 [ 212.083294] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 [ 212.083296] [fglrx] Reserve Block - 2 offset = 0Xffbb000 length = 0X40000 [ 212.163995] [fglrx] interrupt source 10000000 successfully enabled [ 212.164002] [fglrx] enable ID = 0x00000008 [ 212.164010] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 217.662456] CPU0 attaching NULL sched-domain. [ 217.662463] CPU1 attaching NULL sched-domain. [ 217.689077] CPU0 attaching sched-domain: [ 217.689084] domain 0: span 03 [ 217.689086] groups: 01 02 [ 217.689091] CPU1 attaching sched-domain: [ 217.689093] domain 0: span 03 [ 217.689094] groups: 02 01