[ 0.000000] Linux version 2.6.22-6-generic (buildd@rothera) (gcc version 4.1.3 20070528 (prerelease) (Ubuntu 4.1.2-9ubuntu2)) #1 SMP Fri Jun 1 19:24:12 GMT 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fed0000 (usable) [ 0.000000] BIOS-e820: 000000003fed0000 - 000000003fedf000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fedf000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f67e0 [ 0.000000] Entering add_active_range(0, 0, 261840) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261840 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261840 [ 0.000000] On node 0 totalpages: 261840 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32211 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F67A0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 3FED1DE2, 0084 (r1 LENOVO TP-7F 2170 LTP 0) [ 0.000000] ACPI: FACP 3FED1F00, 00F4 (r3 LENOVO TP-7F 2170 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0434): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 3FED225E, CB25 (r1 LENOVO TP-7F 2170 MSFT 100000E) [ 0.000000] ACPI: FACS 3FEF4000, 0040 [ 0.000000] ACPI: SSDT 3FED20B4, 01AA (r1 LENOVO TP-7F 2170 MSFT 100000E) [ 0.000000] ACPI: ECDT 3FEDED83, 0052 (r1 LENOVO TP-7F 2170 LNVO 1) [ 0.000000] ACPI: TCPA 3FEDEDD5, 0032 (r2 LENOVO TP-7F 2170 LNVO 1) [ 0.000000] ACPI: APIC 3FEDEE07, 0068 (r1 LENOVO TP-7F 2170 LNVO 1) [ 0.000000] ACPI: MCFG 3FEDEE6F, 003C (r1 LENOVO TP-7F 2170 LNVO 1) [ 0.000000] ACPI: HPET 3FEDEEAB, 0038 (r1 LENOVO TP-7F 2170 LNVO 1) [ 0.000000] ACPI: BOOT 3FEDEFD8, 0028 (r1 LENOVO TP-7F 2170 LTP 1) [ 0.000000] ACPI: SSDT 3FEF2686, 025F (r1 LENOVO TP-7F 2170 INTL 20050513) [ 0.000000] ACPI: SSDT 3FEF28E5, 00A6 (r1 LENOVO TP-7F 2170 INTL 20050513) [ 0.000000] ACPI: SSDT 3FEF298B, 04F7 (r1 LENOVO TP-7F 2170 INTL 20050513) [ 0.000000] ACPI: SSDT 3FEF2E82, 01D8 (r1 LENOVO TP-7F 2170 INTL 20050513) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] Built 1 zonelists. Total pages: 259795 [ 0.000000] Kernel command line: root=UUID=66fb3299-437e-45ad-8b99-bde1aec6022d ro quiet splash acpi_sleep=s3_bios,s3_mode [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.076 MHz processor. [ 24.605603] Console: colour VGA+ 80x25 [ 24.605875] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 24.606406] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 24.654852] Memory: 1026752k/1047360k available (2002k kernel code, 19908k reserved, 913k data, 360k init, 129856k highmem) [ 24.654869] virtual kernel memory layout: [ 24.654871] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 24.654873] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 24.654875] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 24.654878] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 24.654880] .init : 0xc03df000 - 0xc0439000 ( 360 kB) [ 24.654882] .data : 0xc02f4a8a - 0xc03d90d4 ( 913 kB) [ 24.654884] .text : 0xc0100000 - 0xc02f4a8a (2002 kB) [ 24.654890] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 24.654943] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, Processors=2, Nodes=1 [ 24.654972] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 24.654981] hpet0: 3 64-bit timers, 14318180 Hz [ 24.735958] Calibrating delay using timer specific routine.. 3995.20 BogoMIPS (lpj=7990412) [ 24.735989] Security Framework v1.0.0 initialized [ 24.735998] SELinux: Disabled at boot. [ 24.736020] Mount-cache hash table entries: 512 [ 24.736184] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 24.736197] monitor/mwait feature present. [ 24.736200] using mwait in idle threads. [ 24.736206] CPU: L1 I cache: 32K, L1 D cache: 32K [ 24.736211] CPU: L2 cache: 2048K [ 24.736215] CPU: Physical Processor ID: 0 [ 24.736218] CPU: Processor Core ID: 0 [ 24.736222] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 24.736235] Compat vDSO mapped to ffffe000. [ 24.736253] Checking 'hlt' instruction... OK. [ 24.752110] SMP alternatives: switching to UP code [ 24.752609] ACPI: Core revision 20070126 [ 24.785589] CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [ 24.785616] SMP alternatives: switching to SMP code [ 24.785659] Booting processor 1/1 eip 3000 [ 24.796413] Initializing CPU#1 [ 24.876161] Calibrating delay using timer specific routine.. 3990.17 BogoMIPS (lpj=7980355) [ 24.876171] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 24.876180] monitor/mwait feature present. [ 24.876185] CPU: L1 I cache: 32K, L1 D cache: 32K [ 24.876189] CPU: L2 cache: 2048K [ 24.876192] CPU: Physical Processor ID: 0 [ 24.876195] CPU: Processor Core ID: 1 [ 24.876198] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 24.876762] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [ 24.876796] Total of 2 processors activated (7985.38 BogoMIPS). [ 24.876998] ENABLING IO-APIC IRQs [ 24.877233] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 25.023924] checking TSC synchronization [CPU#0 -> CPU#1]: [ 25.043926] Measured 568116 cycles TSC warp between CPUs, turning off TSC clock. [ 0.240000] Marking TSC unstable due to: check_tsc_sync_source failed. [ 0.244000] Brought up 2 CPUs [ 0.540000] migration_cost=8000 [ 0.540000] Booting paravirtualized kernel on bare hardware [ 0.540000] Time: 9:46:19 Date: 05/26/107 [ 0.540000] NET: Registered protocol family 16 [ 0.540000] EISA bus registered [ 0.540000] ACPI: bus type pci registered [ 0.540000] PCI: Using MMCONFIG [ 0.544000] Setting up standard PCI resources [ 0.564000] ACPI: Interpreter enabled [ 0.564000] ACPI: (supports S0 S3 S4 S5) [ 0.564000] ACPI: Using IOAPIC for interrupt routing [ 0.576000] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.576000] PCI: Probing PCI hardware (bus 00) [ 0.580000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.580000] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.580000] PCI: Transparent bridge - 0000:00:1e.0 [ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.588000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.588000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.588000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.588000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.588000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.588000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.588000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.588000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.592000] ACPI: Power Resource [PUBS] (on) [ 0.592000] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.592000] pnp: PnP ACPI init [ 0.592000] ACPI: bus type pnp registered [ 0.596000] pnp: PnP ACPI: found 12 devices [ 0.596000] ACPI: ACPI bus type pnp unregistered [ 0.596000] PnPBIOS: Disabled by ACPI PNP [ 0.596000] PCI: Using ACPI for IRQ routing [ 0.596000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.596000] NET: Registered protocol family 8 [ 0.596000] NET: Registered protocol family 20 [ 0.596000] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.596000] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 0.596000] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 0.596000] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 0.596000] pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 0.596000] pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 0.596000] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 0.596000] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 0.600000] Time: hpet clocksource has been installed. [ 0.600000] Switched to high resolution mode on CPU 0 [ 0.600000] Switched to high resolution mode on CPU 1 [ 0.628000] PCI: Bridge: 0000:00:01.0 [ 0.628000] IO window: 2000-2fff [ 0.628000] MEM window: ee000000-ee0fffff [ 0.628000] PREFETCH window: d8000000-dfffffff [ 0.628000] PCI: Bridge: 0000:00:1c.0 [ 0.628000] IO window: disabled. [ 0.628000] MEM window: ee100000-ee1fffff [ 0.628000] PREFETCH window: disabled. [ 0.628000] PCI: Bridge: 0000:00:1c.1 [ 0.628000] IO window: 3000-4fff [ 0.628000] MEM window: ec000000-edffffff [ 0.628000] PREFETCH window: e4000000-e40fffff [ 0.628000] PCI: Bridge: 0000:00:1c.2 [ 0.628000] IO window: 5000-6fff [ 0.628000] MEM window: e8000000-e9ffffff [ 0.628000] PREFETCH window: e4100000-e41fffff [ 0.628000] PCI: Bridge: 0000:00:1c.3 [ 0.628000] IO window: 7000-8fff [ 0.628000] MEM window: ea000000-ebffffff [ 0.628000] PREFETCH window: e4200000-e42fffff [ 0.628000] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 0.628000] IO window: 00009000-000090ff [ 0.628000] IO window: 00009400-000094ff [ 0.628000] PREFETCH window: e0000000-e3ffffff [ 0.628000] MEM window: 50000000-53ffffff [ 0.628000] PCI: Bridge: 0000:00:1e.0 [ 0.628000] IO window: 9000-cfff [ 0.628000] MEM window: e4300000-e7ffffff [ 0.628000] PREFETCH window: e0000000-e3ffffff [ 0.628000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.628000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.628000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17 [ 0.628000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.628000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18 [ 0.628000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.628000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19 [ 0.628000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.628000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20 [ 0.628000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.628000] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 0.628000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.628000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.628000] NET: Registered protocol family 2 [ 0.676000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.676000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 0.676000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.676000] TCP: Hash tables configured (established 131072 bind 65536) [ 0.676000] TCP reno registered [ 0.692000] checking if image is initramfs... it is [ 1.828000] Freeing initrd memory: 7021k freed [ 1.828000] Simple Boot Flag at 0x35 set to 0x1 [ 1.828000] audit: initializing netlink socket (disabled) [ 1.828000] audit(1182851180.600:1): initialized [ 1.828000] highmem bounce pool size: 64 pages [ 1.832000] VFS: Disk quotas dquot_6.5.1 [ 1.832000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.832000] io scheduler noop registered [ 1.832000] io scheduler anticipatory registered [ 1.832000] io scheduler deadline registered [ 1.832000] io scheduler cfq registered (default) [ 1.832000] Boot video device is 0000:01:00.0 [ 1.832000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 1.832000] assign_interrupt_mode Found MSI capability [ 1.832000] Allocate Port Service[0000:00:01.0:pcie00] [ 1.832000] Allocate Port Service[0000:00:01.0:pcie03] [ 1.832000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.832000] assign_interrupt_mode Found MSI capability [ 1.832000] Allocate Port Service[0000:00:1c.0:pcie00] [ 1.832000] Allocate Port Service[0000:00:1c.0:pcie02] [ 1.832000] Allocate Port Service[0000:00:1c.0:pcie03] [ 1.832000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.832000] assign_interrupt_mode Found MSI capability [ 1.832000] Allocate Port Service[0000:00:1c.1:pcie00] [ 1.832000] Allocate Port Service[0000:00:1c.1:pcie02] [ 1.832000] Allocate Port Service[0000:00:1c.1:pcie03] [ 1.832000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 1.832000] assign_interrupt_mode Found MSI capability [ 1.832000] Allocate Port Service[0000:00:1c.2:pcie00] [ 1.832000] Allocate Port Service[0000:00:1c.2:pcie02] [ 1.832000] Allocate Port Service[0000:00:1c.2:pcie03] [ 1.836000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 1.836000] assign_interrupt_mode Found MSI capability [ 1.836000] Allocate Port Service[0000:00:1c.3:pcie00] [ 1.836000] Allocate Port Service[0000:00:1c.3:pcie02] [ 1.836000] Allocate Port Service[0000:00:1c.3:pcie03] [ 1.836000] isapnp: Scanning for PnP cards... [ 2.188000] isapnp: No Plug & Play device found [ 2.228000] Real Time Clock Driver v1.12ac [ 2.228000] hpet_resources: 0xfed00000 is busy [ 2.228000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 2.228000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 2.228000] input: Macintosh mouse button emulation as /class/input/input0 [ 2.228000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.236000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.236000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.236000] mice: PS/2 mouse device common for all mice [ 2.240000] EISA: Probing bus 0 at eisa.0 [ 2.240000] Cannot allocate resource for EISA slot 1 [ 2.240000] Cannot allocate resource for EISA slot 2 [ 2.240000] Cannot allocate resource for EISA slot 3 [ 2.240000] Cannot allocate resource for EISA slot 4 [ 2.240000] Cannot allocate resource for EISA slot 5 [ 2.240000] Cannot allocate resource for EISA slot 6 [ 2.240000] Cannot allocate resource for EISA slot 7 [ 2.240000] Cannot allocate resource for EISA slot 8 [ 2.240000] EISA: Detected 0 cards. [ 2.240000] TCP cubic registered [ 2.240000] NET: Registered protocol family 1 [ 2.240000] Using IPI No-Shortcut mode [ 2.240000] Magic number: 11:143:779 [ 2.240000] hash matches device ptyq1 [ 2.240000] Freeing unused kernel memory: 360k freed [ 2.244000] input: AT Translated Set 2 keyboard as /class/input/input1 [ 3.568000] Capability LSM initialized [ 3.580000] ACPI: SSDT 3FEF1D25, 0282 (r1 PmRef Cpu0Ist 100 INTL 20050513) [ 3.580000] ACPI: SSDT 3FEF202C, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513) [ 3.584000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 3.584000] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.584000] ACPI: SSDT 3FEF1C5D, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) [ 3.584000] ACPI: SSDT 3FEF1FA7, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) [ 3.584000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 3.584000] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.588000] ACPI: Thermal Zone [THM0] (48 C) [ 3.592000] ACPI: Thermal Zone [THM1] (45 C) [ 4.292000] usbcore: registered new interface driver usbfs [ 4.292000] usbcore: registered new interface driver hub [ 4.292000] usbcore: registered new device driver usb [ 4.292000] USB Universal Host Controller Interface driver v3.0 [ 4.292000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.292000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 4.292000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.292000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 4.292000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 4.292000] usb usb1: configuration #1 chosen from 1 choice [ 4.292000] hub 1-0:1.0: USB hub found [ 4.292000] hub 1-0:1.0: 2 ports detected [ 4.340000] SCSI subsystem initialized [ 4.348000] libata version 2.21 loaded. [ 4.396000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 4.396000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 4.396000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.396000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 4.396000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 4.396000] usb usb2: configuration #1 chosen from 1 choice [ 4.396000] hub 2-0:1.0: USB hub found [ 4.396000] hub 2-0:1.0: 2 ports detected [ 4.500000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 4.500000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 4.500000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.500000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 4.500000] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 [ 4.500000] usb usb3: configuration #1 chosen from 1 choice [ 4.500000] hub 3-0:1.0: USB hub found [ 4.500000] hub 3-0:1.0: 2 ports detected [ 4.604000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 [ 4.604000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 4.604000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 4.604000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 4.604000] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 [ 4.604000] usb usb4: configuration #1 chosen from 1 choice [ 4.604000] hub 4-0:1.0: USB hub found [ 4.604000] hub 4-0:1.0: 2 ports detected [ 4.708000] tg3.c:v3.76 (May 5, 2007) [ 4.708000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.708000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 4.728000] eth0: Tigon3 [partno(BCM95752m) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:36:69:59:77 [ 4.728000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 4.728000] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 4.728000] ahci 0000:00:1f.2: version 2.2 [ 4.728000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 4.844000] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 4.988000] usb 3-1: configuration #1 chosen from 1 choice [ 4.992000] hub 3-1:1.0: USB hub found [ 4.996000] hub 3-1:1.0: 2 ports detected [ 5.000000] Clocksource tsc unstable (delta = -280016962 ns) [ 5.344000] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 5.516000] usb 3-2: configuration #1 chosen from 1 choice [ 5.732000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode [ 5.732000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 5.732000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 5.732000] scsi0 : ahci [ 5.732000] scsi1 : ahci [ 5.732000] scsi2 : ahci [ 5.732000] scsi3 : ahci [ 5.732000] ata1: SATA max UDMA/133 cmd 0xf8830500 ctl 0x00000000 bmdma 0x00000000 irq 0 [ 5.732000] ata2: SATA max UDMA/133 cmd 0xf8830580 ctl 0x00000000 bmdma 0x00000000 irq 0 [ 5.732000] ata3: SATA max UDMA/133 cmd 0xf8830600 ctl 0x00000000 bmdma 0x00000000 irq 0 [ 5.732000] ata4: SATA max UDMA/133 cmd 0xf8830680 ctl 0x00000000 bmdma 0x00000000 irq 0 [ 5.736000] usb 3-1.2: new full speed USB device using uhci_hcd and address 4 [ 5.868000] usb 3-1.2: configuration #1 chosen from 1 choice [ 6.216000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.216000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568 [ 6.216000] ata1.00: ATA-7: HTS541010G9SA00, MBZIC60H, max UDMA/100 [ 6.216000] ata1.00: 195371568 sectors, multi 16: LBA48 [ 6.216000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568 [ 6.216000] ata1.00: configured for UDMA/100 [ 6.528000] ata2: SATA link down (SStatus 0 SControl 0) [ 6.840000] ata3: SATA link down (SStatus 0 SControl 0) [ 7.152000] ata4: SATA link down (SStatus 0 SControl 0) [ 7.152000] scsi 0:0:0:0: Direct-Access ATA HTS541010G9SA00 MBZI PQ: 0 ANSI: 5 [ 7.152000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 [ 7.152000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 7.152000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 7.152000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 7.152000] ehci_hcd 0000:00:1d.7: debug port 1 [ 7.152000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 7.152000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee404000 [ 7.156000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.156000] usb usb5: configuration #1 chosen from 1 choice [ 7.156000] hub 5-0:1.0: USB hub found [ 7.156000] hub 5-0:1.0: 8 ports detected [ 7.168000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 7.168000] sd 0:0:0:0: [sda] Write Protect is off [ 7.168000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.168000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.168000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 7.168000] sd 0:0:0:0: [sda] Write Protect is off [ 7.168000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.168000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.168000] sda:PCI: Enabling device 0000:15:00.1 (0000 -> 0002) [ 7.280000] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 7.280000] PCI: Setting latency timer of device 0000:15:00.1 to 64 [ 7.328000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[e4302000-e43027ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 7.328000] ata_piix 0000:00:1f.1: version 2.11 [ 7.328000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 7.328000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 7.328000] scsi4 : ata_piix [ 7.328000] scsi5 : ata_piix [ 7.328000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14 [ 7.328000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15 [ 7.532000] sda1 sda2 sda3 sda4 [ 7.556000] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.560000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.632000] usb 5-5: new high speed USB device using ehci_hcd and address 2 [ 7.648000] ata5.00: ATAPI, max UDMA/33 [ 7.764000] usb 5-5: configuration #1 chosen from 1 choice [ 7.764000] hub 5-5:1.0: USB hub found [ 7.764000] hub 5-5:1.0: 2 ports detected [ 7.816000] ata5.00: configured for UDMA/33 [ 7.816000] ata6: port disabled. ignoring. [ 7.816000] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850 RB01 PQ: 0 ANSI: 5 [ 7.816000] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 7.828000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.828000] Uniform CD-ROM driver Revision: 3.20 [ 7.828000] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 7.916000] Attempting manual resume [ 7.916000] swsusp: Resume From Partition 8:3 [ 7.916000] PM: Checking swsusp image. [ 7.916000] PM: Resume from disk failed. [ 7.924000] swsusp: Basic memory bitmaps created [ 7.936000] swsusp: Basic memory bitmaps freed [ 7.952000] EXT3-fs: INFO: recovery required on readonly filesystem. [ 7.952000] EXT3-fs: write access will be enabled during recovery. [ 8.112000] usb 3-1: USB disconnect, address 2 [ 8.112000] usb 3-1.2: USB disconnect, address 4 [ 8.240000] usb 3-2: USB disconnect, address 3 [ 8.480000] usb 3-2: new full speed USB device using uhci_hcd and address 5 [ 8.600000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b0020239277] [ 8.656000] usb 3-2: configuration #1 chosen from 1 choice [ 8.860000] usb 5-5.2: new high speed USB device using ehci_hcd and address 4 [ 8.952000] usb 5-5.2: configuration #1 chosen from 1 choice [ 10.040000] kjournald starting. Commit interval 5 seconds [ 10.040000] EXT3-fs: recovery complete. [ 10.040000] EXT3-fs: mounted filesystem with ordered data mode. [ 20.588000] PM: Writing back config space on device 0000:02:00.0 at offset c (was ffff0000, writing 0) [ 20.588000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100506, writing 100106) [ 22.028000] NET: Registered protocol family 17 [ 22.044000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 22.048000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.484000] Linux agpgart interface v0.102 (c) Dave Jones [ 22.868000] iTCO_vendor_support: vendor-support=0 [ 23.024000] agpgart: Detected an Intel 945GM Chipset. [ 23.044000] agpgart: AGP aperture is 256M @ 0x0 [ 23.044000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 23.052000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2028] [ 23.052000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 23.052000] Yenta: Routing CardBus interrupts to ISA [ 23.052000] Yenta TI: socket 0000:15:00.0, mfunc 0x01db1b22, devctl 0x64 [ 23.144000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 23.144000] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 23.184000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [ 23.188000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 23.188000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 23.212000] ieee80211_crypt: registered algorithm 'NULL' [ 23.268000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 23.268000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 23.284000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 23.284000] Socket status: 30000086 [ 23.284000] pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff [ 23.284000] cs: IO port probe 0x9000-0xcfff: clean. [ 23.284000] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [ 23.284000] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [ 23.344000] intel_rng: FWH not detected [ 23.368000] ACPI: PCI Interrupt 0000:15:00.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.368000] PCI: Setting latency timer of device 0000:15:00.2 to 64 [ 23.432000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.1mp [ 23.432000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 23.432000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21 [ 23.432000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 23.432000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 23.452000] irda_init() [ 23.452000] NET: Registered protocol family 23 [ 23.544000] pnp: Device 00:0a activated. [ 23.544000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 23.544000] nsc-ircc, chip->init [ 23.544000] nsc-ircc, Found chip at base=0x164e [ 23.544000] nsc-ircc, driver loaded (Dag Brattli) [ 23.544000] IrDA: Registered device irda0 [ 23.544000] nsc-ircc, Found dongle: No dongle connected [ 23.544000] nsc_ircc_init_dongle_interface(), No dongle connected [ 23.576000] sdhci: Secure Digital Host Controller Interface driver [ 23.576000] sdhci: Copyright(c) Pierre Ossman [ 23.576000] sdhci: SDHCI controller found at 0000:15:00.3 [104c:803c] (rev 0) [ 23.576000] ACPI: PCI Interrupt 0000:15:00.3[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.576000] PCI: Setting latency timer of device 0000:15:00.3 to 64 [ 23.576000] mmc0: SDHCI at 0xe4302800 irq 16 DMA [ 23.688000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21 [ 23.688000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 23.904000] cs: IO port probe 0x100-0x3af: clean. [ 23.908000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 23.908000] cs: IO port probe 0x820-0x8ff: clean. [ 23.908000] cs: IO port probe 0xc00-0xcf7: clean. [ 23.908000] cs: IO port probe 0xa00-0xaff: clean. [ 24.276000] fuse init (API version 7.8) [ 24.328000] lp: driver loaded but no devices found [ 24.396000] thinkpad_ec: thinkpad_ec 0.31 loaded. [ 24.408000] tp_smapi 0.31 loading... [ 24.408000] tp_smapi successfully loaded (smapi_port=0xb2). [ 24.452000] hdaps: supported laptop not found! [ 24.452000] hdaps: driver init failed (ret=-19)! [ 24.552000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 24.552000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 24.552000] thinkpad_acpi: ThinkPad EC firmware 7FHT26WW-1.08 [ 24.628000] Adding 498004k swap on /dev/disk/by-uuid/c1e8e0bb-482e-48c7-a059-17a1a65aba72. Priority:-1 extents:1 across:498004k [ 24.820000] EXT3 FS on sda4, internal journal [ 25.052000] hda_intel: azx_get_response timeout, switching to polling mode... [ 25.408000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 27.904000] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 28.008000] NTFS volume version 3.1. [ 28.808000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 29.032000] input: TPPS/2 IBM TrackPoint as /class/input/input3 [ 33.004000] set_level status: 0 [ 33.004000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 33.004000] set_level status: 0 [ 33.004000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 33.028000] ACPI: Battery Slot [BAT0] (battery present) [ 33.064000] ACPI: AC Adapter [AC] (on-line) [ 33.084000] ACPI: ACPI Dock Station Driver [ 33.088000] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay [ 33.088000] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler [ 33.088000] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added [ 33.104000] input: Power Button (FF) as /class/input/input4 [ 33.104000] ACPI: Power Button (FF) [PWRF] [ 33.104000] input: Lid Switch as /class/input/input5 [ 33.104000] ACPI: Lid Switch [LID] [ 33.132000] input: Sleep Button (CM) as /class/input/input6 [ 33.132000] ACPI: Sleep Button (CM) [SLPB] [ 33.156000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 40.944000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 40.948000] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes. [ 40.948000] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0 [ 40.980000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 41.468000] Non-volatile memory driver v1.2 [ 41.480000] input: /usr/sbin/thinkpad-keys as /class/input/input7 [ 42.136000] Bluetooth: Core ver 2.11 [ 42.136000] NET: Registered protocol family 31 [ 42.136000] Bluetooth: HCI device and connection manager initialized [ 42.136000] Bluetooth: HCI socket layer initialized [ 42.168000] Bluetooth: L2CAP ver 2.8 [ 42.168000] Bluetooth: L2CAP socket layer initialized [ 42.504000] Bluetooth: RFCOMM socket layer initialized [ 42.504000] Bluetooth: RFCOMM TTY layer initialized [ 42.504000] Bluetooth: RFCOMM ver 1.8 [ 43.216000] [fglrx] total GART = 130023424 [ 43.216000] [fglrx] free GART = 114032640 [ 43.216000] [fglrx] max single GART = 114032640 [ 43.216000] [fglrx] total LFB = 134086656 [ 43.216000] [fglrx] free LFB = 110088192 [ 43.216000] [fglrx] max single LFB = 110088192 [ 43.216000] [fglrx] total Inv = 0 [ 43.216000] [fglrx] free Inv = 0 [ 43.216000] [fglrx] max single Inv = 0 [ 43.216000] [fglrx] total TIM = 0 [ 65.888000] NET: Registered protocol family 10 [ 65.888000] lo: Disabled Privacy Extensions [ 65.888000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 65.888000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 210.740000] input: Virtual ThinkFinger Keyboard as /class/input/input8 [ 228.132000] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 228.148000] ISOFS: changing to secondary root [ 231.256000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 233.268000] ieee80211_crypt: registered algorithm 'CCMP' [ 241.476000] eth1: no IPv6 routers present [ 263.056000] eth1: no IPv6 routers present [ 267.480000] input: Virtual ThinkFinger Keyboard as /class/input/input9