[fglrx] HIS Radeon X1950Pro 512MB AGP: AGP and AIGLX not enabled

Bug #163249 reported by Zaeggu on 2007-11-17
8
Affects Status Importance Assigned to Milestone
Fedora
Invalid
Undecided
Unassigned
Mandriva
Invalid
Undecided
Unassigned
Suse
Invalid
Undecided
Unassigned
linux-restricted-modules-2.6.22 (Ubuntu)
Undecided
Unassigned

Bug Description

My Mainboard is the "Intel D865PERL" withe the newer Bios version 21!

Testet Systems: Feisty 7.04 / Gutsy 7.10 / Fedora 7 / OpenSuse 10.3 / Mandriva 2008

My Graficcard is in the System as PCI-E, in the Xorg.0.log find this:

(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc ATI Radeon X1950 Pro Primary (PCIE) rev 154, Mem @ 0xe0000000/28, 0xff820000/16, I/O @ 0xa800/8, BIOS @ 0xff800000/17
(--) PCI: (1:0:1) ATI Technologies Inc ATI Radeon X1950 Pro Secondary (PCIE) rev 154, Mem @ 0xff830000/16

The comand: "lsmod|grep agp"

root@ubuntu:/home/ubuntu# lsmod|grep agp
intel_agp 25620 1
agpgart 35016 1 intel_agp

And the comand: "grep -i agp /var/log/Xorg.0.log"

root@ubuntu:/home/ubuntu# grep -i agp /var/log/Xorg.0.log
root@ubuntu:/home/ubuntu#

Not result!

Zaeggu (zaeggu) on 2007-11-17
description: updated
Zaeggu (zaeggu) on 2007-11-17
description: updated
Tormod Volden (tormodvolden) wrote :

Thank you for taking the time to report this bug and helping to make Ubuntu better. Please attach your X server configuration file (/etc/X11/xorg.conf) and X server log file (/var/log/Xorg.0.log) to the bug report as individual uncompressed file attachments using the "Attachment:" box below. Could you please also try to run without any /etc/X11/xorg.conf and let Xorg autodetect your display and video card? Please also attach the /var/log/Xorg.0.log from this attempt. Thanks in advance.

You video card is supported by the vesa or radeonhd drivers (no 3D acceleration) or the proprietary, closed-source fglrx driver. The default vesa driver will not use AGP.

Please also attach as a file the output from: sudo lspci -vv.

Zaeggu (zaeggu) wrote :
Download full text (12.8 KiB)

OK, here the files withe fglrx 8.37.x Driver activ!

and the resut of sudo lspci -vv:

root@zaeggu-desktop:/home/zaeggu# sudo lspci -vv
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
        Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: [e4] Vendor Specific Information
        Capabilities: [a0] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: ff800000-ff8fffff
        Prefetchable memory behind bridge: d0000000-dfffffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at cc00 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at d000 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 19
        Region 4: I/O ports at d400 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (pro...

Zaeggu (zaeggu) wrote :

And the Xorg.0.log

Zaeggu (zaeggu) wrote :

The System Ubuntu Gutsy 7.10 is fresh installet, and UpToDate!

Tormod Volden (tormodvolden) wrote :

The only errors I saw in your log file are these:

(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering

Why do you want to grep for agp? What is exactly the problem that you are reporting?

The PCI to AGP britge is not Installet, and lsmod|grep agp it this result:

root@zaeggu-desktop:/home/zaeggu# lsmod|grep agp
intel_agp 25620 1
agpgart 35016 2 fglrx,intel_agp

The comand grep -i agp /var/log/Xorg.0.log

root@zaeggu-desktop:/home/zaeggu# grep -i agp /var/log/Xorg.0.log
root@zaeggu-desktop:/home/zaeggu#

Wen i install the fglrx-control, the AMD Tool show AGP and x0 normal is x8!

Tormod Volden (tormodvolden) wrote :

Is this an "AGP Express" interface as explained on http://en.wikipedia.org/wiki/Accelerated_Graphics_Port ?

Do you have a real AGP card, but it's plugged into an "AGP Express" slot on a PCIE motherboard? I don't think you can expect AGP to work then. Do you have an example Xorg.0.log where you can see that AGP is working?

Tormod Volden (tormodvolden) wrote :

I googled your motherboard which looks like a normal PCI board with a normal AGP port: http://support.intel.com/support/motherboards/desktop/D865PERL/sb/CS-008963.htm

There is not much we can do to fix problems with the closed-sourced driver fglrx, but you can maybe try XGL as suggested here:
 * https://wiki.ubuntu.com/CompizFeedback
 * http://ubuntuforums.org/showthread.php?t=569654&page=20
 * http://ubuntuforums.org/showthread.php?t=515573&page=2

Changed in linux-restricted-modules-2.6.22:
assignee: tormodvolden → nobody
status: Incomplete → Confirmed
Zaeggu (zaeggu) wrote :

I have a real AGP Card the HIS Radeon X1950Pro 512Mb AGP (not PCI-E), and the Mainboard is a AGP 4x /8x Model: Intel D865PERL! OK i go testing this tipp, install first the Driver, and the xserver-xgl!

Zaeggu (zaeggu) wrote :

Impossible to Aktivate the AGP port, so same impossible to Aktivate Compiz withe the Driver Version 8.37.x, 8.42.x and the never Driver 7.11!

Bryce Harrington (bryce) wrote :

[This is an automated message]

As of Intrepid (8.10), we have a dedicated package 'fglrx-installer' for fglrx bugs, which now includes a process for upstreaming bugs to AMD.

  http://bugs.launchpad.net/ubuntu/+source/fglrx-installer

To transition your bug into the new fglrx-package, we need your help. Please do the following:

 a. Verify the bug occurs in Intrepid.
     (Intrepid ISOs: http://cdimage.ubuntu.com)
 b. If you haven't already, please include in the bug:
     * Your /var/log/Xorg.0.log
     * The output of `lspci -vvnn`
     * Steps to reproduce the issue
 c. Click 'Also affects distribution'
 d. Set 'Source Package Name' to 'fglrx-installer'
 e. Click Continue

Thank you. This will assist us in reviewing and upstreaming your fglrx bug, as appropriate.

[We'll expire the fglrx bugs in l-r-m-* in a month or so.]

Jonathan Thomas (echidnaman) wrote :

Closing unused distro-bug-watch tasks.

Changed in fedora:
status: New → Invalid
Changed in mandriva:
status: New → Invalid
Changed in suse:
status: New → Invalid
Jonathan Thomas (echidnaman) wrote :

We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again!

Changed in linux-restricted-modules-2.6.22 (Ubuntu):
status: Confirmed → Invalid
To post a comment you must log in.
This report contains Public information  Edit
Everyone can see this information.

Other bug subscribers