[ 0.000000] Linux version 2.6.22-14-generic (buildd@vernadsky) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Wed Oct 10 06:00:47 GMT 2007 (Ubuntu 2.6.22-14.43-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe81400 (usable) [ 0.000000] BIOS-e820: 000000007fe81400 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) [ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 523905) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523905 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523905 [ 0.000000] On node 0 totalpages: 523905 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292228 pages, LIFO batch:31 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FC0C0 checksum 0 [ 0.000000] ACPI: RSDP 000FC0C0, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 7FE8198A, 0044 (r1 DELL M07 27D7060F ASL 61) [ 0.000000] ACPI: FACP 7FE82800, 0074 (r1 DELL M07 27D7060F ASL 61) [ 0.000000] ACPI: DSDT 7FE83400, 5487 (r1 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 7FE91C00, 0040 [ 0.000000] ACPI: HPET 7FE82F00, 0038 (r1 DELL M07 1 ASL 61) [ 0.000000] ACPI: APIC 7FE83000, 0068 (r1 DELL M07 27D7060F ASL 47) [ 0.000000] ACPI: ASF! 7FE82C00, 005B (r16 DELL M07 27D7060F ASL 61) [ 0.000000] ACPI: MCFG 7FE82FC0, 003E (r16 DELL M07 27D7060F ASL 61) [ 0.000000] ACPI: SLIC 7FE8309C, 0176 (r1 DELL M07 27D7060F ASL 61) [ 0.000000] ACPI: TCPA 7FE83300, 0032 (r1 DELL M07 27D7060F ASL 61) [ 0.000000] ACPI: SSDT 7FE81A11, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] Built 1 zonelists. Total pages: 519812 [ 0.000000] Kernel command line: root=UUID=b67efaa2-5505-4682-bd9a-a64c4e299300 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.037 MHz processor. [ 18.048392] Console: colour VGA+ 80x25 [ 18.048662] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 18.048931] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 18.119495] Memory: 2065968k/2095620k available (2015k kernel code, 28240k reserved, 916k data, 364k init, 1178116k highmem) [ 18.119503] virtual kernel memory layout: [ 18.119504] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 18.119505] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 18.119506] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 18.119507] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 18.119508] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 18.119509] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 18.119510] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 18.119512] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 18.119547] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 18.119676] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 18.119681] hpet0: 3 64-bit timers, 14318180 Hz [ 18.200655] Calibrating delay using timer specific routine.. 3994.14 BogoMIPS (lpj=7988283) [ 18.200676] Security Framework v1.0.0 initialized [ 18.200682] SELinux: Disabled at boot. [ 18.200693] Mount-cache hash table entries: 512 [ 18.200812] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 18.200819] monitor/mwait feature present. [ 18.200820] using mwait in idle threads. [ 18.200824] CPU: L1 I cache: 32K, L1 D cache: 32K [ 18.200826] CPU: L2 cache: 4096K [ 18.200829] CPU: Physical Processor ID: 0 [ 18.200830] CPU: Processor Core ID: 0 [ 18.200832] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 18.200840] Compat vDSO mapped to ffffe000. [ 18.200852] Checking 'hlt' instruction... OK. [ 18.216748] SMP alternatives: switching to UP code [ 18.217147] Early unpacking initramfs... done [ 18.496531] ACPI: Core revision 20070126 [ 18.496571] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 18.499180] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 18.499195] SMP alternatives: switching to SMP code [ 18.499265] Booting processor 1/1 eip 3000 [ 20.668369] Initializing CPU#1 [ 20.748191] Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=7980088) [ 20.748196] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 20.748201] monitor/mwait feature present. [ 20.748203] CPU: L1 I cache: 32K, L1 D cache: 32K [ 20.748205] CPU: L2 cache: 4096K [ 20.748207] CPU: Physical Processor ID: 0 [ 20.748208] CPU: Processor Core ID: 1 [ 20.748209] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 18.593153] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 18.593173] Total of 2 processors activated (7984.18 BogoMIPS). [ 18.593368] ENABLING IO-APIC IRQs [ 18.593558] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 18.740430] checking TSC synchronization [CPU#0 -> CPU#1]: [ 18.760427] Measured 4303113108 cycles TSC warp between CPUs, turning off TSC clock. [ 0.512000] Marking TSC unstable due to: check_tsc_sync_source failed. [ 0.516000] Brought up 2 CPUs [ 0.616000] migration_cost=8000 [ 0.616000] Booting paravirtualized kernel on bare hardware [ 0.616000] Time: 1:43:03 Date: 09/12/107 [ 0.616000] NET: Registered protocol family 16 [ 0.616000] EISA bus registered [ 0.616000] ACPI: bus type pci registered [ 0.644000] PCI: PCI BIOS revision 2.10 entry at 0xfacc6, last bus=14 [ 0.644000] PCI: Using configuration type 1 [ 0.644000] Setting up standard PCI resources [ 0.648000] ACPI: EC: Look up EC in DSDT [ 0.664000] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 9B [20070126] [ 0.664000] ACPI: SSDT 7FE819CE, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 0.664000] ACPI: Interpreter enabled [ 0.664000] ACPI: (supports S0 S3 S4 S5) [ 0.664000] ACPI: Using IOAPIC for interrupt routing [ 0.696000] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.696000] PCI: Probing PCI hardware (bus 00) [ 0.696000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.696000] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.700000] PCI: Transparent bridge - 0000:00:1e.0 [ 0.700000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.700000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.700000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.700000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.700000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.700000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT] [ 0.700000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.708000] ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11) [ 0.708000] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3 [ 0.708000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 0.708000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.708000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.708000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.708000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.708000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.708000] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.708000] pnp: PnP ACPI init [ 0.708000] ACPI: bus type pnp registered [ 0.752000] pnp: PnP ACPI: found 14 devices [ 0.752000] ACPI: ACPI bus type pnp unregistered [ 0.756000] PnPBIOS: Disabled by ACPI PNP [ 0.756000] PCI: Using ACPI for IRQ routing [ 0.756000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.796000] NET: Registered protocol family 8 [ 0.796000] NET: Registered protocol family 20 [ 0.796000] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved [ 0.796000] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 0.796000] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 0.796000] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.796000] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.796000] pnp: 00:02: ioport range 0x1000-0x1005 has been reserved [ 0.796000] pnp: 00:02: ioport range 0x1008-0x100f has been reserved [ 0.796000] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved [ 0.796000] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved [ 0.796000] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved [ 0.796000] pnp: 00:03: ioport range 0x1060-0x107f has been reserved [ 0.796000] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved [ 0.796000] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved [ 0.796000] pnp: 00:08: ioport range 0xc80-0xcaf has been reserved [ 0.796000] pnp: 00:08: ioport range 0xcc0-0xcff could not be reserved [ 0.796000] pnp: 00:08: ioport range 0x910-0x91f has been reserved [ 0.796000] pnp: 00:08: ioport range 0x920-0x92f has been reserved [ 0.796000] pnp: 00:08: ioport range 0xcbc-0xcbf has been reserved [ 0.796000] pnp: 00:08: ioport range 0x930-0x97f has been reserved [ 0.796000] pnp: 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.796000] pnp: 00:0d: ioport range 0xcb0-0xcbb has been reserved [ 0.796000] pnp: 00:0d: iomem range 0xfed40000-0xfed44fff could not be reserved [ 0.800000] Time: hpet clocksource has been installed. [ 0.800000] Switched to high resolution mode on CPU 0 [ 0.800000] Switched to high resolution mode on CPU 1 [ 0.824000] PCI: Bridge: 0000:00:01.0 [ 0.824000] IO window: disabled. [ 0.824000] MEM window: ed000000-efefffff [ 0.824000] PREFETCH window: d0000000-dfffffff [ 0.824000] PCI: Bridge: 0000:00:1c.0 [ 0.824000] IO window: disabled. [ 0.824000] MEM window: disabled. [ 0.824000] PREFETCH window: disabled. [ 0.824000] PCI: Bridge: 0000:00:1c.1 [ 0.824000] IO window: disabled. [ 0.824000] MEM window: ecf00000-ecffffff [ 0.824000] PREFETCH window: disabled. [ 0.824000] PCI: Bridge: 0000:00:1c.2 [ 0.824000] IO window: disabled. [ 0.824000] MEM window: ece00000-ecefffff [ 0.824000] PREFETCH window: disabled. [ 0.824000] PCI: Bridge: 0000:00:1c.3 [ 0.824000] IO window: e000-efff [ 0.824000] MEM window: ecc00000-ecdfffff [ 0.824000] PREFETCH window: e0000000-e01fffff [ 0.824000] PCI: Bridge: 0000:00:1e.0 [ 0.824000] IO window: disabled. [ 0.824000] MEM window: disabled. [ 0.824000] PREFETCH window: disabled. [ 0.824000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.824000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.824000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.824000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.824000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.824000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.824000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.824000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.824000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 0.824000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.824000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.824000] NET: Registered protocol family 2 [ 0.872000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.872000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 0.872000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.872000] TCP: Hash tables configured (established 131072 bind 65536) [ 0.872000] TCP reno registered [ 0.888000] checking if image is initramfs... it is [ 1.436000] Freeing initrd memory: 7116k freed [ 1.436000] audit: initializing netlink socket (disabled) [ 1.436000] audit(1192153383.300:1): initialized [ 1.436000] highmem bounce pool size: 64 pages [ 1.436000] VFS: Disk quotas dquot_6.5.1 [ 1.436000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.436000] io scheduler noop registered [ 1.436000] io scheduler anticipatory registered [ 1.436000] io scheduler deadline registered [ 1.436000] io scheduler cfq registered (default) [ 1.436000] Boot video device is 0000:01:00.0 [ 1.436000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 1.436000] assign_interrupt_mode Found MSI capability [ 1.436000] Allocate Port Service[0000:00:01.0:pcie00] [ 1.436000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.436000] assign_interrupt_mode Found MSI capability [ 1.436000] Allocate Port Service[0000:00:1c.0:pcie00] [ 1.436000] Allocate Port Service[0000:00:1c.0:pcie02] [ 1.436000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.436000] assign_interrupt_mode Found MSI capability [ 1.436000] Allocate Port Service[0000:00:1c.1:pcie00] [ 1.436000] Allocate Port Service[0000:00:1c.1:pcie02] [ 1.436000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 1.436000] assign_interrupt_mode Found MSI capability [ 1.436000] Allocate Port Service[0000:00:1c.2:pcie00] [ 1.436000] Allocate Port Service[0000:00:1c.2:pcie02] [ 1.436000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 1.440000] assign_interrupt_mode Found MSI capability [ 1.440000] Allocate Port Service[0000:00:1c.3:pcie00] [ 1.440000] Allocate Port Service[0000:00:1c.3:pcie02] [ 1.440000] isapnp: Scanning for PnP cards... [ 1.792000] isapnp: No Plug & Play device found [ 1.812000] Real Time Clock Driver v1.12ac [ 1.812000] hpet_resources: 0xfed00000 is busy [ 1.812000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.812000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.812000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.812000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.812000] input: Macintosh mouse button emulation as /class/input/input0 [ 1.812000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.816000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.816000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.816000] mice: PS/2 mouse device common for all mice [ 1.816000] EISA: Probing bus 0 at eisa.0 [ 1.816000] EISA: Cannot allocate resource for mainboard [ 1.816000] Cannot allocate resource for EISA slot 1 [ 1.816000] EISA: Detected 0 cards. [ 1.816000] TCP cubic registered [ 1.816000] NET: Registered protocol family 1 [ 1.816000] Using IPI No-Shortcut mode [ 1.816000] Magic number: 11:711:710 [ 1.816000] Freeing unused kernel memory: 364k freed [ 1.820000] input: AT Translated Set 2 keyboard as /class/input/input1 [ 2.984000] AppArmor: AppArmor initialized<5>audit(1192153384.800:2): type=1505 info="AppArmor initialized" pid=1264 [ 2.992000] fuse init (API version 7.8) [ 2.996000] Failure registering capabilities with primary security module. [ 3.028000] ACPI: SSDT 7FE82138, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 3.028000] ACPI: SSDT 7FE81EED, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 3.028000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 3.028000] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.028000] ACPI: SSDT 7FE8237C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 3.032000] ACPI: SSDT 7FE820B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 3.032000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 3.032000] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.032000] ACPI: Thermal Zone [THM] (62 C) [ 3.436000] usbcore: registered new interface driver usbfs [ 3.436000] usbcore: registered new interface driver hub [ 3.436000] usbcore: registered new device driver usb [ 3.440000] USB Universal Host Controller Interface driver v3.0 [ 3.440000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 3.440000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.440000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.440000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.440000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80 [ 3.440000] usb usb1: configuration #1 chosen from 1 choice [ 3.440000] hub 1-0:1.0: USB hub found [ 3.440000] hub 1-0:1.0: 2 ports detected [ 3.480000] SCSI subsystem initialized [ 3.484000] libata version 2.21 loaded. [ 3.544000] tg3.c:v3.77 (May 31, 2007) [ 3.544000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 3.544000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.544000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.544000] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 3.544000] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 3.544000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.544000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60 [ 3.544000] usb usb2: configuration #1 chosen from 1 choice [ 3.544000] hub 2-0:1.0: USB hub found [ 3.544000] hub 2-0:1.0: 2 ports detected [ 3.564000] eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:c5:c9:a8:a9 [ 3.564000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 3.564000] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.648000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 3.648000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.648000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.648000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.648000] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40 [ 3.648000] usb usb3: configuration #1 chosen from 1 choice [ 3.648000] hub 3-0:1.0: USB hub found [ 3.648000] hub 3-0:1.0: 2 ports detected [ 3.752000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 3.752000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.752000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.752000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 3.752000] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20 [ 3.752000] usb usb4: configuration #1 chosen from 1 choice [ 3.752000] hub 4-0:1.0: USB hub found [ 3.752000] hub 4-0:1.0: 2 ports detected [ 3.784000] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 3.856000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 3.856000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.856000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.856000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 3.856000] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.856000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.856000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000 [ 3.860000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.860000] usb usb5: configuration #1 chosen from 1 choice [ 3.860000] hub 5-0:1.0: USB hub found [ 3.860000] hub 5-0:1.0: 8 ports detected [ 3.964000] ata_piix 0000:00:1f.2: version 2.11 [ 3.964000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 3.964000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 3.964000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.964000] scsi0 : ata_piix [ 3.964000] scsi1 : ata_piix [ 3.964000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14 [ 3.964000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15 [ 4.004000] Clocksource tsc unstable (delta = -357264124 ns) [ 4.128000] ata1.00: ATA-7: Hitachi HTS721010G9SA00, MCZOC10H, max UDMA/100 [ 4.128000] ata1.00: 195371568 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 4.144000] ata1.00: configured for UDMA/100 [ 4.308000] usb 1-2: device not accepting address 2, error -71 [ 4.480000] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L632D, DE03, max UDMA/33 [ 4.668000] ata2.00: configured for UDMA/33 [ 4.668000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72101 MCZO PQ: 0 ANSI: 5 [ 4.668000] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632D DE03 PQ: 0 ANSI: 5 [ 4.676000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 4.676000] sd 0:0:0:0: [sda] Write Protect is off [ 4.676000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.676000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.676000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 4.676000] sd 0:0:0:0: [sda] Write Protect is off [ 4.676000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.676000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.676000] sda: sda1 sda2 [ 4.720000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.720000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.720000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.724000] sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray [ 4.724000] Uniform CD-ROM driver Revision: 3.20 [ 4.724000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.952000] Attempting manual resume [ 4.952000] swsusp: Resume From Partition 8:2 [ 4.952000] PM: Checking swsusp image. [ 4.952000] PM: Resume from disk failed. [ 4.964000] EXT3-fs: INFO: recovery required on readonly filesystem. [ 4.964000] EXT3-fs: write access will be enabled during recovery. [ 5.476000] usb 5-4: new high speed USB device using ehci_hcd and address 4 [ 5.608000] usb 5-4: configuration #1 chosen from 1 choice [ 5.848000] usbcore: registered new interface driver libusual [ 5.852000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 5.852000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 5.856000] Initializing USB Mass Storage driver... [ 6.088000] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 6.240000] usb 2-1: configuration #1 chosen from 1 choice [ 6.240000] hub 2-1:1.0: USB hub found [ 6.244000] hub 2-1:1.0: 3 ports detected [ 6.352000] scsi2 : SCSI emulation for USB Mass Storage devices [ 6.352000] usb-storage: device found at 4 [ 6.352000] usb-storage: waiting for device to settle before scanning [ 6.352000] usbcore: registered new interface driver usb-storage [ 6.352000] USB Mass Storage support registered. [ 6.592000] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 6.744000] usb 1-2: configuration #1 chosen from 1 choice [ 6.744000] hub 1-2:1.0: USB hub found [ 6.748000] hub 1-2:1.0: 4 ports detected [ 7.100000] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 7.252000] usb 3-2: configuration #1 chosen from 1 choice [ 7.252000] hub 3-2:1.0: USB hub found [ 7.256000] hub 3-2:1.0: 4 ports detected [ 7.572000] usb 2-1.1: new full speed USB device using uhci_hcd and address 3 [ 7.704000] usb 2-1.1: configuration #1 chosen from 1 choice [ 7.912000] usb 2-1.2: new full speed USB device using uhci_hcd and address 4 [ 8.036000] usb 2-1.2: configuration #1 chosen from 1 choice [ 8.260000] usb 1-2.3: new full speed USB device using uhci_hcd and address 5 [ 8.412000] usb 1-2.3: configuration #1 chosen from 1 choice [ 8.624000] usb 3-2.1: new low speed USB device using uhci_hcd and address 3 [ 8.800000] usb 3-2.1: configuration #1 chosen from 1 choice [ 8.920000] kjournald starting. Commit interval 5 seconds [ 8.920000] EXT3-fs: recovery complete. [ 8.924000] EXT3-fs: mounted filesystem with ordered data mode. [ 9.012000] usb 3-2.2: new low speed USB device using uhci_hcd and address 4 [ 9.156000] usb 3-2.2: configuration #1 chosen from 1 choice [ 9.164000] usbcore: registered new interface driver hiddev [ 9.188000] input: Microsoft NaturalŪ Ergonomic Keyboard 4000 as /class/input/input2 [ 9.188000] input: USB HID v1.11 Keyboard [Microsoft NaturalŪ Ergonomic Keyboard 4000] on usb-0000:00:1d.2-2.1 [ 9.224000] input: Microsoft NaturalŪ Ergonomic Keyboard 4000 as /class/input/input3 [ 9.224000] input: USB HID v1.11 Device [Microsoft NaturalŪ Ergonomic Keyboard 4000] on usb-0000:00:1d.2-2.1 [ 9.240000] input: Microsoft Microsoft Trackball OpticalŪ as /class/input/input4 [ 9.240000] input: USB HID v1.00 Mouse [Microsoft Microsoft Trackball OpticalŪ] on usb-0000:00:1d.2-2.2 [ 9.240000] usbcore: registered new interface driver usbhid [ 9.240000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 11.352000] usb-storage: device scan complete [ 11.352000] scsi 2:0:0:0: Direct-Access TOSHIBA MK1032GAX 0000 PQ: 0 ANSI: 0 [ 11.352000] sd 2:0:0:0: [sdb] 195371568 512-byte hardware sectors (100030 MB) [ 11.356000] sd 2:0:0:0: [sdb] Write Protect is off [ 11.356000] sd 2:0:0:0: [sdb] Mode Sense: 27 00 00 00 [ 11.356000] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 11.356000] sd 2:0:0:0: [sdb] 195371568 512-byte hardware sectors (100030 MB) [ 11.356000] sd 2:0:0:0: [sdb] Write Protect is off [ 11.356000] sd 2:0:0:0: [sdb] Mode Sense: 27 00 00 00 [ 11.356000] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 11.356000] sdb: sdb1 [ 11.708000] sd 2:0:0:0: [sdb] Attached SCSI disk [ 11.708000] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 19.748000] Linux agpgart interface v0.102 (c) Dave Jones [ 19.756000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 19.800000] intel_rng: FWH not detected [ 19.820000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 20.052000] iTCO_vendor_support: vendor-support=0 [ 20.052000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 20.300000] usbcore: registered new interface driver xpad [ 20.300000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 20.312000] ieee80211_crypt: registered algorithm 'NULL' [ 20.312000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 20.312000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 20.384000] Bluetooth: Core ver 2.11 [ 20.384000] NET: Registered protocol family 31 [ 20.384000] Bluetooth: HCI device and connection manager initialized [ 20.384000] Bluetooth: HCI socket layer initialized [ 20.432000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 20.432000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 20.436000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 20.436000] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 20.436000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 20.508000] Bluetooth: HCI USB driver ver 2.9 [ 20.508000] usbcore: registered new interface driver hci_usb [ 20.588000] input: PS/2 Mouse as /class/input/input5 [ 20.608000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input6 [ 20.612000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 20.612000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 20.724000] nvidia: module license 'NVIDIA' taints kernel. [ 20.976000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 20.976000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 20.984000] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007 [ 21.232000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 21.232000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 22.528000] hda_intel: azx_get_response timeout, switching to polling mode... [ 22.784000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 22.884000] lp: driver loaded but no devices found [ 23.048000] snd-bt-sco revision 1.19 $ [ 23.048000] snd-bt-sco: snd-bt-scod thread starting [ 23.096000] Adding 2104504k swap on /dev/sda2. Priority:-1 extents:1 across:2104504k [ 23.296000] EXT3 FS on sda1, internal journal [ 25.156000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 25.156000] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 25.156000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 25.176000] ACPI: AC Adapter [AC] (on-line) [ 25.200000] input: Lid Switch as /class/input/input7 [ 25.200000] ACPI: Lid Switch [LID] [ 25.200000] input: Power Button (CM) as /class/input/input8 [ 25.200000] ACPI: Power Button (CM) [PBTN] [ 25.200000] input: Sleep Button (CM) as /class/input/input9 [ 25.200000] ACPI: Sleep Button (CM) [SBTN] [ 25.256000] ACPI: ACPI Dock Station Driver [ 25.256000] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay [ 25.256000] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler [ 25.256000] ACPI: Error installing bay notify handler [ 25.256000] ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added [ 25.292000] ACPI: Battery Slot [BAT0] (battery present) [ 25.292000] ACPI: Battery Slot [BAT1] (battery absent) [ 28.952000] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 28.952000] tg3: eth0: Flow control is on for TX and on for RX. [ 32.588000] ppdev: user-space parallel port driver [ 33.216000] audit(1192153415.139:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5695 profile="/usr/sbin/cupsd" [ 37.336000] Failure registering capabilities with primary security module. [ 37.756000] audit(1192153419.639:4): type=1502 operation="file_mmap" requested_mask="mrw" denied_mask="m" name="/var/cache/samba/printing/PDF.tdb" pid=6116 profile="/usr/sbin/smbd" [ 37.772000] audit(1192153419.639:5): type=1502 operation="file_mmap" requested_mask="mrw" denied_mask="m" name="/var/cache/samba/printing/OJ4200.tdb" pid=6116 profile="/usr/sbin/smbd" [ 38.052000] Bluetooth: L2CAP ver 2.8 [ 38.052000] Bluetooth: L2CAP socket layer initialized [ 38.156000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 38.252000] Bluetooth: RFCOMM socket layer initialized [ 38.252000] Bluetooth: RFCOMM TTY layer initialized [ 38.252000] Bluetooth: RFCOMM ver 1.8 [ 41.752000] /dev/vmmon[6526]: Module vmmon: registered with major=10 minor=165 [ 41.752000] /dev/vmmon[6526]: Module vmmon: initialized [ 42.196000] /dev/vmnet: open called by PID 6553 (vmnet-bridge) [ 42.196000] /dev/vmnet: hub 0 does not exist, allocating memory. [ 42.196000] /dev/vmnet: port on hub 0 successfully opened [ 42.196000] bridge-eth0: enabling the bridge [ 42.196000] bridge-eth0: up [ 42.196000] bridge-eth0: already up [ 42.196000] bridge-eth0: attached [ 42.220000] /dev/vmnet: open called by PID 6568 (vmnet-netifup) [ 42.220000] /dev/vmnet: hub 1 does not exist, allocating memory. [ 42.220000] /dev/vmnet: port on hub 1 successfully opened [ 42.220000] /dev/vmnet: open called by PID 6578 (vmnet-netifup) [ 42.220000] /dev/vmnet: hub 2 does not exist, allocating memory. [ 42.220000] /dev/vmnet: port on hub 2 successfully opened [ 42.220000] /dev/vmnet: open called by PID 6583 (vmnet-netifup) [ 42.220000] /dev/vmnet: hub 3 does not exist, allocating memory. [ 42.220000] /dev/vmnet: port on hub 3 successfully opened [ 42.224000] /dev/vmnet: open called by PID 6575 (vmnet-netifup) [ 42.224000] /dev/vmnet: hub 4 does not exist, allocating memory. [ 42.224000] /dev/vmnet: port on hub 4 successfully opened [ 42.224000] /dev/vmnet: open called by PID 6587 (vmnet-netifup) [ 42.224000] /dev/vmnet: hub 8 does not exist, allocating memory. [ 42.224000] /dev/vmnet: port on hub 8 successfully opened [ 42.292000] /dev/vmnet: open called by PID 6586 (vmnet-natd) [ 42.292000] /dev/vmnet: port on hub 8 successfully opened [ 42.692000] NET: Registered protocol family 17 [ 42.876000] /dev/vmnet: open called by PID 6647 (vmnet-dhcpd) [ 42.876000] /dev/vmnet: port on hub 4 successfully opened [ 42.876000] /dev/vmnet: open called by PID 6645 (vmnet-dhcpd) [ 42.876000] /dev/vmnet: port on hub 1 successfully opened [ 42.876000] /dev/vmnet: open called by PID 6646 (vmnet-dhcpd) [ 42.876000] /dev/vmnet: port on hub 2 successfully opened [ 42.876000] /dev/vmnet: open called by PID 6644 (vmnet-dhcpd) [ 42.876000] /dev/vmnet: port on hub 3 successfully opened [ 42.876000] /dev/vmnet: open called by PID 6643 (vmnet-dhcpd) [ 42.876000] /dev/vmnet: port on hub 8 successfully opened [ 44.080000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 44.396000] Netfilter messages via NETLINK v0.30. [ 44.408000] nf_conntrack version 0.5.0 (8192 buckets, 65536 max) [ 66.228000] UDF-fs: No VRS found [ 66.316000] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 66.376000] ISOFS: changing to secondary root [ 72.568000] kjournald starting. Commit interval 5 seconds [ 72.568000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 72.576000] EXT3 FS on sdb1, internal journal [ 72.576000] EXT3-fs: recovery complete. [ 72.584000] EXT3-fs: mounted filesystem with ordered data mode.