frederic@PC-portable-PB:~$ dmesg [ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bfef000 (usable) [ 0.000000] BIOS-e820: 000000003bff0000 - 000000003bffffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000003bffffc0 - 000000003c000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 63MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 245743) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 245743 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 245743 [ 0.000000] On node 0 totalpages: 245743 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 127 pages used for memmap [ 0.000000] HighMem zone: 16240 pages, LIFO batch:3 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00E6010 checksum 0 [ 0.000000] ACPI: RSDP 000E6010, 0014 (r0 OID_00) [ 0.000000] ACPI: RSDT 3BFFC2D0, 002C (r1 INSYDE FACP_000 100 0000 10200) [ 0.000000] ACPI: FACP 3BFFFB00, 0074 (r1 INSYDE FACP_000 100 0000 10200) [ 0.000000] ACPI: DSDT 3BFFC310, 37E2 (r1 INSYDE PN800 1000 INTL 2002036) [ 0.000000] ACPI: FACS 3BFFFFC0, 0040 [ 0.000000] ACPI: APIC 3BFFFB90, 0068 (r1 INSYDE APIC_000 30303030 0000 10200) [ 0.000000] ACPI: BIOS age (400) fails cutoff (2000), acpi=force is required to enable ACPI [ 0.000000] ACPI: acpi=force override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3c000000:c3f80000) [ 0.000000] Built 1 zonelists. Total pages: 243824 [ 0.000000] Kernel command line: root=UUID=867d3dcb-4304-4f1c-96ee-96caa2245107 ro vga=791 pnpbios=off pci=biosirq acpi=force irqpoll quiet locale=fr_FR elevator=cfq [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1492.716 MHz processor. [ 10.380216] Console: colour dummy device 80x25 [ 10.380752] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 10.381352] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.420638] Memory: 962180k/982972k available (2015k kernel code, 20180k reserved, 916k data, 364k init, 65468k highmem) [ 10.420650] virtual kernel memory layout: [ 10.420651] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 10.420652] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 10.420654] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 10.420655] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 10.420657] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 10.420658] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 10.420660] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 10.420664] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 10.420712] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 10.500654] Calibrating delay using timer specific routine.. 2998.15 BogoMIPS (lpj=5996303) [ 10.500689] Security Framework v1.0.0 initialized [ 10.500701] SELinux: Disabled at boot. [ 10.500718] Mount-cache hash table entries: 512 [ 10.500883] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 10.500899] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.500902] CPU: L2 cache: 1024K [ 10.500906] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002040 00000000 00000000 00000000 [ 10.500916] Compat vDSO mapped to ffffe000. [ 10.500931] Checking 'hlt' instruction... OK. [ 10.516754] SMP alternatives: switching to UP code [ 10.517010] Freeing SMP alternatives: 11k freed [ 10.517346] Early unpacking initramfs... done [ 10.946214] ACPI: Core revision 20070126 [ 10.946294] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 10.981995] CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08 [ 10.982027] Total of 1 processors activated (2998.15 BogoMIPS). [ 10.982789] ENABLING IO-APIC IRQs [ 10.983112] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 11.127808] Brought up 1 CPUs [ 11.127983] Booting paravirtualized kernel on bare hardware [ 11.128080] Time: 10:47:30 Date: 09/15/107 [ 11.128112] NET: Registered protocol family 16 [ 11.128216] EISA bus registered [ 11.128235] ACPI: bus type pci registered [ 11.128315] PCI: PCI BIOS revision 2.10 entry at 0xe9b04, last bus=1 [ 11.128318] PCI: Using configuration type 1 [ 11.128320] Setting up standard PCI resources [ 11.130674] ACPI: EC: Look up EC in DSDT [ 11.131309] ACPI: EC: GPE=0x01, ports=0x66, 0x62 [ 11.133682] ACPI: Interpreter enabled [ 11.133686] ACPI: (supports S0 S1 S3 S4 S5) [ 11.133709] ACPI: Using IOAPIC for interrupt routing [ 11.144078] ACPI: EC: GPE=0x01, ports=0x66, 0x62 [ 11.144141] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 11.144168] PCI: Probing PCI hardware (bus 00) [ 11.144891] PCI quirk: region 1000-107f claimed by vt8235 PM [ 11.144896] PCI quirk: region 1400-140f claimed by vt8235 SMB [ 11.145253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 11.157456] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 11.157557] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15) [ 11.157654] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) [ 11.157750] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15) [ 11.157838] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 11.157927] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 11.158015] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 11.158104] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 11.158216] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. [ 11.158336] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11 [ 11.158495] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled. [ 11.158582] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE [ 11.158592] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 11.158599] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126] [ 11.158603] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0 [ 11.158685] Linux Plug and Play Support v0.97 (c) Adam Belay [ 11.158703] pnp: PnP ACPI init [ 11.158712] ACPI: bus type pnp registered [ 11.163149] pnp: PnP ACPI: found 9 devices [ 11.163152] ACPI: ACPI bus type pnp unregistered [ 11.163155] PnPBIOS: Disabled [ 11.163211] PCI: Using ACPI for IRQ routing [ 11.163215] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 11.165531] NET: Registered protocol family 8 [ 11.165533] NET: Registered protocol family 20 [ 11.165612] pnp: 00:05: iomem range 0xe0000-0xfffff could not be reserved [ 11.165616] pnp: 00:05: iomem range 0xfff80000-0xffffffff could not be reserved [ 11.165620] pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved [ 11.165623] pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved [ 11.165630] pnp: 00:07: ioport range 0x330-0x331 has been reserved [ 11.165639] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 11.165642] pnp: 00:07: ioport range 0x1000-0x107f has been reserved [ 11.165645] pnp: 00:07: ioport range 0x1400-0x140f has been reserved [ 11.167710] Time: tsc clocksource has been installed. [ 11.195927] PCI: Bridge: 0000:00:01.0 [ 11.195930] IO window: c000-dfff [ 11.195936] MEM window: c0000000-cfffffff [ 11.195941] PREFETCH window: 90000000-9fffffff [ 11.195966] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 11.195982] NET: Registered protocol family 2 [ 11.235655] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 11.235767] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 11.238653] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 11.239728] TCP: Hash tables configured (established 131072 bind 65536) [ 11.239733] TCP reno registered [ 11.251840] checking if image is initramfs... it is [ 11.698971] Switched to high resolution mode on CPU 0 [ 12.087142] Freeing initrd memory: 7826k freed [ 12.087656] audit: initializing netlink socket (disabled) [ 12.087677] audit(1192445250.116:1): initialized [ 12.087773] highmem bounce pool size: 64 pages [ 12.089907] VFS: Disk quotas dquot_6.5.1 [ 12.089973] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 12.090103] io scheduler noop registered [ 12.090106] io scheduler anticipatory registered [ 12.090108] io scheduler deadline registered [ 12.090128] io scheduler cfq registered (default) [ 12.090150] PCI: VIA PCI bridge detected. Disabling DAC. [ 12.090207] Boot video device is 0000:01:00.0 [ 12.090417] isapnp: Scanning for PnP cards... [ 12.445414] isapnp: No Plug & Play device found [ 12.484792] Real Time Clock Driver v1.12ac [ 12.484926] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 12.486592] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 12.486874] input: Macintosh mouse button emulation as /class/input/input0 [ 12.486967] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 12.497642] i8042.c: Detected active multiplexing controller, rev 1.1. [ 12.502633] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.502640] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 12.502643] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 12.502646] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 12.502649] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 12.502866] mice: PS/2 mouse device common for all mice [ 12.503591] EISA: Probing bus 0 at eisa.0 [ 12.503602] Cannot allocate resource for EISA slot 1 [ 12.503635] EISA: Detected 0 cards. [ 12.503768] TCP cubic registered [ 12.503792] NET: Registered protocol family 1 [ 12.503826] Using IPI No-Shortcut mode [ 12.504036] Magic number: 11:446:780 [ 12.504222] hash matches device ptyq2 [ 12.504541] Freeing unused kernel memory: 364k freed [ 12.558151] input: AT Translated Set 2 keyboard as /class/input/input1 [ 12.719913] AppArmor: AppArmor initialized<5>audit(1192445251.116:2): type=1505 info="AppArmor initialized" pid=1166 [ 12.729990] fuse init (API version 7.8) [ 12.736694] Failure registering capabilities with primary security module. [ 12.756496] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 12.756504] ACPI: Processor [CPU0] (supports 16 throttling states) [ 12.763968] ACPI: Thermal Zone [TZ0] (0 C) [ 12.781012] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 12.799726] md: linear personality registered for level -1 [ 12.805112] md: multipath personality registered for level -4 [ 12.810265] md: raid0 personality registered for level 0 [ 12.815960] md: raid1 personality registered for level 1 [ 12.820969] raid5: automatically using best checksumming function: pIII_sse [ 12.837175] pIII_sse : 3884.000 MB/sec [ 12.837178] raid5: using function: pIII_sse (3884.000 MB/sec) [ 12.905085] raid6: int32x1 500 MB/s [ 12.972971] raid6: int32x2 594 MB/s [ 13.040909] raid6: int32x4 441 MB/s [ 13.108882] raid6: int32x8 401 MB/s [ 13.176687] raid6: mmxx1 1481 MB/s [ 13.244571] raid6: mmxx2 1755 MB/s [ 13.312507] raid6: sse1x1 1081 MB/s [ 13.380375] raid6: sse1x2 1805 MB/s [ 13.448253] raid6: sse2x1 1955 MB/s [ 13.516161] raid6: sse2x2 2199 MB/s [ 13.516164] raid6: using algorithm sse2x2 (2199 MB/s) [ 13.516167] md: raid6 personality registered for level 6 [ 13.516169] md: raid5 personality registered for level 5 [ 13.516172] md: raid4 personality registered for level 4 [ 13.545757] md: raid10 personality registered for level 10 [ 14.162037] usbcore: registered new interface driver usbfs [ 14.162081] usbcore: registered new interface driver hub [ 14.162109] usbcore: registered new device driver usb [ 14.163280] USB Universal Host Controller Interface driver v3.0 [ 14.163530] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE [ 14.163541] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 14.163548] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126] [ 14.163553] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off [ 14.163561] ACPI: Invalid IRQ link routing entry [ 14.163564] ACPI: Unable to derive IRQ for device 0000:00:10.0 [ 14.163566] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 11 [ 14.163596] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 14.163876] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 14.163914] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200 [ 14.164087] usb usb1: configuration #1 chosen from 1 choice [ 14.164120] hub 1-0:1.0: USB hub found [ 14.164128] hub 1-0:1.0: 2 ports detected [ 14.198250] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 14.198258] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 14.230499] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 14.267359] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE [ 14.267372] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 14.267379] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126] [ 14.267384] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off [ 14.267392] ACPI: Invalid IRQ link routing entry [ 14.267394] ACPI: Unable to derive IRQ for device 0000:00:10.1 [ 14.267397] ACPI: PCI Interrupt 0000:00:10.1[B]: no GSI - using IRQ 7 [ 14.267427] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 14.267467] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 14.267505] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220 [ 14.267622] usb usb2: configuration #1 chosen from 1 choice [ 14.267653] hub 2-0:1.0: USB hub found [ 14.267661] hub 2-0:1.0: 2 ports detected [ 14.371188] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE [ 14.371202] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 14.371209] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126] [ 14.371214] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off [ 14.371222] ACPI: Invalid IRQ link routing entry [ 14.371224] ACPI: Unable to derive IRQ for device 0000:00:10.2 [ 14.371227] ACPI: PCI Interrupt 0000:00:10.2[C]: no GSI - using IRQ 5 [ 14.371258] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 14.371293] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 14.371331] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240 [ 14.371457] usb usb3: configuration #1 chosen from 1 choice [ 14.371488] hub 3-0:1.0: USB hub found [ 14.371496] hub 3-0:1.0: 2 ports detected [ 3.852000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.856000] Time: acpi_pm clocksource has been installed. [ 3.928000] PCI: Enabling device 0000:00:10.3 (0000 -> 0002) [ 3.928000] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE [ 3.928000] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 3.928000] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126] [ 3.928000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off [ 3.928000] ACPI: Invalid IRQ link routing entry [ 3.928000] ACPI: Unable to derive IRQ for device 0000:00:10.3 [ 3.928000] ACPI: PCI Interrupt 0000:00:10.3[D]: no GSI - using IRQ 10 [ 3.928000] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 3.928000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 3.928000] ehci_hcd 0000:00:10.3: irq 10, io mem 0x40010000 [ 3.960000] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 3.960000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.960000] usb usb4: configuration #1 chosen from 1 choice [ 3.960000] hub 4-0:1.0: USB hub found [ 3.960000] hub 4-0:1.0: 6 ports detected [ 4.064000] VP_IDE: IDE controller at PCI slot 0000:00:11.1 [ 4.064000] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug [ 4.064000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [ 4.064000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 4.064000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 4.064000] VP_IDE: chipset revision 6 [ 4.064000] VP_IDE: not 100% native mode: will probe irqs later [ 4.064000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 [ 4.064000] ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio [ 4.064000] ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio [ 4.064000] Probing IDE interface ide0... [ 4.480000] hda: ST9808210A, ATA DISK drive [ 5.152000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.220000] usb 1-1: new low speed USB device using uhci_hcd and address 3 [ 5.228000] Probing IDE interface ide1... [ 5.536000] usb 1-1: configuration #1 chosen from 1 choice [ 5.552000] usbcore: registered new interface driver hiddev [ 5.592000] input: Logitech USB Receiver as /class/input/input2 [ 5.592000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1 [ 5.592000] usbcore: registered new interface driver usbhid [ 5.592000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 6.096000] hdc: MATSHITAUJ-850D, ATAPI CD/DVD-ROM drive [ 6.432000] ide1 at 0x170-0x177,0x376 on irq 15 [ 6.440000] SCSI subsystem initialized [ 6.448000] libata version 2.21 loaded. [ 6.452000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23 [ 6.452000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23 [ 6.452000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKB] -> GSI 23 (level, low) -> IRQ 17 [ 6.456000] eth0: VIA Rhine II at 0x1e200, 00:40:d0:94:c6:37, IRQ 17. [ 6.456000] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 6.464000] hda: max request size: 512KiB [ 6.472000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) [ 6.476000] hda: cache flushes supported [ 6.476000] hda: hda1 hda2 < hda5 > [ 6.596000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 6.596000] Uniform CD-ROM driver Revision: 3.20 [ 6.888000] kjournald starting. Commit interval 5 seconds [ 6.888000] EXT3-fs: mounted filesystem with ordered data mode. [ 39.244000] input: PC Speaker as /class/input/input3 [ 42.028000] wlan: 0.8.4.2 (0.9.3.2) [ 42.196000] ath_pci: Unknown symbol _ath_hal_attach [ 42.196000] ath_pci: Unknown symbol ath_hal_process_noisefloor [ 42.200000] ath_pci: Unknown symbol ath_hal_computetxtime [ 42.200000] ath_pci: Unknown symbol ath_hal_mhz2ieee [ 42.200000] ath_pci: Unknown symbol ath_hal_detach [ 42.200000] ath_pci: Unknown symbol ath_hal_probe [ 42.200000] ath_pci: Unknown symbol ath_hal_init_channels [ 42.200000] ath_pci: Unknown symbol ath_hal_getwirelessmodes [ 42.700000] Linux agpgart interface v0.102 (c) Dave Jones [ 42.708000] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset [ 42.708000] agpgart: AGP aperture is 32M @ 0xa0000000 [ 42.812000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 42.816000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 43.028000] irda_init() [ 43.028000] NET: Registered protocol family 23 [ 43.576000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b3, caps: 0xa04713/0x200000 [ 43.624000] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 45.076000] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug [ 45.076000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22 [ 45.076000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 45.076000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 18 [ 45.076000] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 48.884000] lp: driver loaded but no devices found [ 49.140000] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available [ 50.604000] EXT3 FS on hda1, internal journal [ 56.080000] ACPI: Battery Slot [BAT0] (battery absent) [ 56.692000] ACPI: AC Adapter [AC] (on-line) [ 56.748000] No dock devices found. [ 56.844000] input: Power Button (FF) as /class/input/input5 [ 56.848000] ACPI: Power Button (FF) [PWRF] [ 56.896000] input: Lid Switch as /class/input/input6 [ 56.896000] ACPI: Lid Switch [LID] [ 56.920000] input: Sleep Button (CM) as /class/input/input7 [ 56.920000] ACPI: Sleep Button (CM) [SBTN] [ 57.084000] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no) [ 61.604000] eth0: link down [ 64.712000] ppdev: user-space parallel port driver [ 71.896000] audit(1192445322.092:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4898 profile="/usr/sbin/cupsd" [ 72.572000] apm: BIOS not found. [ 75.432000] [drm] Initialized drm 1.1.0 20060810 [ 76.096000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19 [ 76.096000] [drm] Initialized via 2.11.1 20070202 on minor 0 [ 76.472000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 76.472000] agpgart: Device is in legacy mode, falling back to 2.x [ 76.472000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode [ 76.472000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode [ 78.288000] NET: Registered protocol family 10 [ 78.288000] lo: Disabled Privacy Extensions [ 78.288000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 90.088000] Failure registering capabilities with primary security module. [ 91.692000] Bluetooth: Core ver 2.11 [ 91.696000] NET: Registered protocol family 31 [ 91.696000] Bluetooth: HCI device and connection manager initialized [ 91.696000] Bluetooth: HCI socket layer initialized [ 91.828000] Bluetooth: L2CAP ver 2.8 [ 91.828000] Bluetooth: L2CAP socket layer initialized [ 92.500000] Bluetooth: RFCOMM socket layer initialized [ 92.500000] Bluetooth: RFCOMM TTY layer initialized [ 92.500000] Bluetooth: RFCOMM ver 1.8 frederic@PC-portable-PB:~$