[ 0.000000] Linux version 2.6.22-10-generic (buildd@yellow) (gcc version 4.1.3 20070812 (prerelease) (Ubuntu 4.1.2-15ubuntu2)) #1 SMP Wed Aug 22 07:42:05 GMT 2007 (Ubuntu 2.6.22-10.30-generic) [ 0.000000] Command line: root=UUID=165f9be9-0950-4f3e-b5ba-bd49a82dd99a ro quiet splash locale=de_DE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fed0000 (usable) [ 0.000000] BIOS-e820: 000000003fed0000 - 000000003fedf000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fedf000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 261840) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F67A0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 3FED1DA4, 0084 (r1 LENOVO TP-7F 2180 LTP 0) [ 0.000000] ACPI: FACP 3FED1F00, 00F4 (r3 LENOVO TP-7F 2180 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0434): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 3FED225E, CB63 (r1 LENOVO TP-7F 2180 MSFT 100000E) [ 0.000000] ACPI: FACS 3FEF4000, 0040 [ 0.000000] ACPI: SSDT 3FED20B4, 01AA (r1 LENOVO TP-7F 2180 MSFT 100000E) [ 0.000000] ACPI: ECDT 3FEDEDC1, 0052 (r1 LENOVO TP-7F 2180 LNVO 1) [ 0.000000] ACPI: TCPA 3FEDEE13, 0032 (r2 LENOVO TP-7F 2180 LNVO 1) [ 0.000000] ACPI: APIC 3FEDEE45, 0068 (r1 LENOVO TP-7F 2180 LNVO 1) [ 0.000000] ACPI: MCFG 3FEDEEAD, 003C (r1 LENOVO TP-7F 2180 LNVO 1) [ 0.000000] ACPI: HPET 3FEDEEE9, 0038 (r1 LENOVO TP-7F 2180 LNVO 1) [ 0.000000] ACPI: BOOT 3FEDEFD8, 0028 (r1 LENOVO TP-7F 2180 LTP 1) [ 0.000000] ACPI: SSDT 3FEF2686, 025F (r1 LENOVO TP-7F 2180 INTL 20050513) [ 0.000000] ACPI: SSDT 3FEF28E5, 00A6 (r1 LENOVO TP-7F 2180 INTL 20050513) [ 0.000000] ACPI: SSDT 3FEF298B, 04F7 (r1 LENOVO TP-7F 2180 INTL 20050513) [ 0.000000] ACPI: SSDT 3FEF2E82, 01D8 (r1 LENOVO TP-7F 2180 INTL 20050513) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fed0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 261840) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fed0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 261840 [ 0.000000] On node 0 totalpages: 261743 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1126 pages reserved [ 0.000000] DMA zone: 2817 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3523 pages used for memmap [ 0.000000] DMA32 zone: 254221 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 257038 [ 0.000000] Kernel command line: root=UUID=165f9be9-0950-4f3e-b5ba-bd49a82dd99a ro quiet splash locale=de_DE [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 14.486434] time.c: Detected 1994.999 MHz processor. [ 14.488791] Console: colour VGA+ 80x25 [ 14.488811] Checking aperture... [ 14.488825] Calgary: detecting Calgary via BIOS EBDA area [ 14.488827] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 14.502127] Memory: 1020792k/1047360k available (2272k kernel code, 26180k reserved, 1184k data, 300k init) [ 14.502178] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 14.580255] Calibrating delay using timer specific routine.. 3994.42 BogoMIPS (lpj=7988857) [ 14.580292] Security Framework v1.0.0 initialized [ 14.580301] SELinux: Disabled at boot. [ 14.580413] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 14.581234] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 14.581636] Mount-cache hash table entries: 256 [ 14.581780] CPU: L1 I cache: 32K, L1 D cache: 32K [ 14.581783] CPU: L2 cache: 4096K [ 14.581785] CPU 0/0 -> Node 0 [ 14.581787] using mwait in idle threads. [ 14.581789] CPU: Physical Processor ID: 0 [ 14.581791] CPU: Processor Core ID: 0 [ 14.581797] CPU0: Thermal monitoring enabled (TM2) [ 14.581808] SMP alternatives: switching to UP code [ 14.582099] Early unpacking initramfs... done [ 14.911784] ACPI: Core revision 20070126 [ 14.911852] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 14.970641] Using local APIC timer interrupts. [ 15.020741] result 10390606 [ 15.020743] Detected 10.390 MHz APIC timer. [ 15.024062] SMP alternatives: switching to SMP code [ 15.024159] Booting processor 1/2 APIC 0x1 [ 15.035175] Initializing CPU#1 [ 15.112266] Calibrating delay using timer specific routine.. 3990.18 BogoMIPS (lpj=7980362) [ 15.112273] CPU: L1 I cache: 32K, L1 D cache: 32K [ 15.112274] CPU: L2 cache: 4096K [ 15.112277] CPU 1/1 -> Node 0 [ 15.112278] CPU: Physical Processor ID: 0 [ 15.112280] CPU: Processor Core ID: 1 [ 15.112285] CPU1: Thermal monitoring enabled (TM2) [ 15.112789] Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 15.115972] Brought up 2 CPUs [ 15.384063] migration_cost=35 [ 15.383938] NET: Registered protocol family 16 [ 15.384017] ACPI: bus type pci registered [ 15.384024] PCI: Using configuration type 1 [ 15.385419] ACPI: EC: Found ECDT [ 15.393241] ACPI: Interpreter enabled [ 15.393244] ACPI: (supports S0 S3 S4 S5) [ 15.393259] ACPI: Using IOAPIC for interrupt routing [ 15.400784] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 15.400830] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 15.400836] PCI: Probing PCI hardware (bus 00) [ 15.401535] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 15.401539] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 15.402994] PCI: Transparent bridge - 0000:00:1e.0 [ 15.403153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 15.403310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 15.403424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 15.403540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 15.403655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 15.403772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 15.403894] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 15.406684] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 15.406877] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 15.407067] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 15.407258] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 15.407447] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 15.407637] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 15.407830] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 15.408021] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 15.408292] ACPI: Power Resource [PUBS] (on) [ 15.408310] Linux Plug and Play Support v0.97 (c) Adam Belay [ 15.408320] pnp: PnP ACPI init [ 15.408328] ACPI: bus type pnp registered [ 15.411527] pnp: PnP ACPI: found 12 devices [ 15.411530] ACPI: ACPI bus type pnp unregistered [ 15.411579] PCI: Using ACPI for IRQ routing [ 15.411581] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 15.411853] NET: Registered protocol family 8 [ 15.411855] NET: Registered protocol family 20 [ 15.411868] PCI-GART: No AMD northbridge found. [ 15.411873] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 15.411877] hpet0: 3 64-bit timers, 14318180 Hz [ 15.412919] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 15.412922] pnp: 00:00: iomem range 0xc0000-0xc3fff has been reserved [ 15.412924] pnp: 00:00: iomem range 0xc4000-0xc7fff has been reserved [ 15.412927] pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 15.412932] pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 15.412935] pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 15.412937] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 15.412940] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 15.413227] PCI: Bridge: 0000:00:01.0 [ 15.413230] IO window: 2000-2fff [ 15.413233] MEM window: ee000000-ee0fffff [ 15.413236] PREFETCH window: d8000000-dfffffff [ 15.413240] PCI: Bridge: 0000:00:1c.0 [ 15.413241] IO window: disabled. [ 15.413247] MEM window: ee100000-ee1fffff [ 15.413251] PREFETCH window: disabled. [ 15.413256] PCI: Bridge: 0000:00:1c.1 [ 15.413259] IO window: 3000-4fff [ 15.413265] MEM window: ec000000-edffffff [ 15.413270] PREFETCH window: e4000000-e40fffff [ 15.413275] PCI: Bridge: 0000:00:1c.2 [ 15.413278] IO window: 5000-6fff [ 15.413284] MEM window: e8000000-e9ffffff [ 15.413288] PREFETCH window: e4100000-e41fffff [ 15.413294] PCI: Bridge: 0000:00:1c.3 [ 15.413297] IO window: 7000-8fff [ 15.413302] MEM window: ea000000-ebffffff [ 15.413307] PREFETCH window: e4200000-e42fffff [ 15.413314] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 15.413316] IO window: 00009000-000090ff [ 15.413321] IO window: 00009400-000094ff [ 15.413326] PREFETCH window: e0000000-e3ffffff [ 15.413331] MEM window: 50000000-53ffffff [ 15.413336] PCI: Bridge: 0000:00:1e.0 [ 15.413339] IO window: 9000-cfff [ 15.413344] MEM window: e4300000-e7ffffff [ 15.413349] PREFETCH window: e0000000-e3ffffff [ 15.413364] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.413368] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 15.413390] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 15.413396] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 15.413418] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 15.413423] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 15.413445] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 15.413450] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 15.413472] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 15.413478] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 15.413488] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 15.413494] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 15.413510] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.413523] NET: Registered protocol family 2 [ 15.415791] Time: hpet clocksource has been installed. [ 15.455807] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 15.456155] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) [ 15.457442] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 15.458015] TCP: Hash tables configured (established 131072 bind 65536) [ 15.458017] TCP reno registered [ 15.471903] checking if image is initramfs... it is [ 16.122518] Freeing initrd memory: 7185k freed [ 16.125974] Simple Boot Flag at 0x35 set to 0x1 [ 16.126873] audit: initializing netlink socket (disabled) [ 16.126895] audit(1187822948.584:1): initialized [ 16.129007] VFS: Disk quotas dquot_6.5.1 [ 16.129055] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 16.129144] io scheduler noop registered [ 16.129146] io scheduler anticipatory registered [ 16.129148] io scheduler deadline registered [ 16.129238] io scheduler cfq registered (default) [ 16.131880] Boot video device is 0000:01:00.0 [ 16.132010] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 16.132043] assign_interrupt_mode Found MSI capability [ 16.132070] Allocate Port Service[0000:00:01.0:pcie00] [ 16.132151] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 16.132207] assign_interrupt_mode Found MSI capability [ 16.132251] Allocate Port Service[0000:00:1c.0:pcie00] [ 16.132285] Allocate Port Service[0000:00:1c.0:pcie02] [ 16.132380] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 16.132435] assign_interrupt_mode Found MSI capability [ 16.132479] Allocate Port Service[0000:00:1c.1:pcie00] [ 16.132510] Allocate Port Service[0000:00:1c.1:pcie02] [ 16.132606] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 16.132661] assign_interrupt_mode Found MSI capability [ 16.132705] Allocate Port Service[0000:00:1c.2:pcie00] [ 16.132736] Allocate Port Service[0000:00:1c.2:pcie02] [ 16.132833] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 16.132889] assign_interrupt_mode Found MSI capability [ 16.132933] Allocate Port Service[0000:00:1c.3:pcie00] [ 16.132964] Allocate Port Service[0000:00:1c.3:pcie02] [ 16.153832] Real Time Clock Driver v1.12ac [ 16.153928] hpet_resources: 0xfed00000 is busy [ 16.153972] Linux agpgart interface v0.102 (c) Dave Jones [ 16.153975] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 16.154944] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 16.155068] input: Macintosh mouse button emulation as /class/input/input0 [ 16.155152] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 16.164363] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 16.164368] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 16.164512] mice: PS/2 mouse device common for all mice [ 16.164706] TCP cubic registered [ 16.164764] NET: Registered protocol family 1 [ 16.164950] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 16.164957] Freeing unused kernel memory: 300k freed [ 16.171386] input: AT Translated Set 2 keyboard as /class/input/input1 [ 17.320895] AppArmor: AppArmor initialized [ 17.320902] audit(1187822949.780:2): AppArmor initialized [ 17.320903] [ 17.323780] AppArmor: Registered secondary security module: capability. [ 17.323782] Capability LSM initialized as secondary [ 17.329767] ACPI: SSDT 3FEF1D25, 0282 (r1 PmRef Cpu0Ist 100 INTL 20050513) [ 17.330032] ACPI: SSDT 3FEF202C, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513) [ 17.330944] Monitor-Mwait will be used to enter C-1 state [ 17.330947] Monitor-Mwait will be used to enter C-2 state [ 17.330949] Monitor-Mwait will be used to enter C-3 state [ 17.330953] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 17.330958] ACPI: Processor [CPU0] (supports 8 throttling states) [ 17.331163] ACPI: SSDT 3FEF1C5D, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) [ 17.331406] ACPI: SSDT 3FEF1FA7, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) [ 17.332635] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 17.332639] ACPI: Processor [CPU1] (supports 8 throttling states) [ 17.333925] ACPI: Thermal Zone [THM0] (54 C) [ 17.335394] ACPI: Thermal Zone [THM1] (51 C) [ 17.682273] usbcore: registered new interface driver usbfs [ 17.682295] usbcore: registered new interface driver hub [ 17.682316] usbcore: registered new device driver usb [ 17.682889] USB Universal Host Controller Interface driver v3.0 [ 17.682982] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.682993] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 17.682996] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 17.683140] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 17.683173] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 17.683269] usb usb1: configuration #1 chosen from 1 choice [ 17.683288] hub 1-0:1.0: USB hub found [ 17.683292] hub 1-0:1.0: 2 ports detected [ 17.700990] SCSI subsystem initialized [ 17.705050] libata version 2.21 loaded. [ 17.776156] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 17.776169] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 17.776173] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 17.776197] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 17.776229] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 [ 17.776317] usb usb2: configuration #1 chosen from 1 choice [ 17.776339] hub 2-0:1.0: USB hub found [ 17.776344] hub 2-0:1.0: 2 ports detected [ 17.778922] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 17.778930] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 17.778934] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 17.778952] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 17.778979] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 17.779056] usb usb3: configuration #1 chosen from 1 choice [ 17.779075] hub 3-0:1.0: USB hub found [ 17.779080] hub 3-0:1.0: 2 ports detected [ 17.789125] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 17.789132] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 17.789136] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 17.789152] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 17.789179] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 [ 17.789258] usb usb4: configuration #1 chosen from 1 choice [ 17.789282] hub 4-0:1.0: USB hub found [ 17.789285] hub 4-0:1.0: 2 ports detected [ 17.800111] tg3.c:v3.77 (May 31, 2007) [ 17.800166] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.800177] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 17.809910] eth0: Tigon3 [partno(BCM95752m) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:36:ae:b6:e0 [ 17.809916] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 17.809919] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 17.810315] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 [ 17.811175] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 17.811183] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 17.811236] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 17.811275] ehci_hcd 0000:00:1d.7: debug port 1 [ 17.811281] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 17.811290] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000 [ 17.815182] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 17.815287] usb usb5: configuration #1 chosen from 1 choice [ 17.815314] hub 5-0:1.0: USB hub found [ 17.815321] hub 5-0:1.0: 8 ports detected [ 17.820273] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 17.843281] ata_piix 0000:00:1f.1: version 2.11 [ 17.843298] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 17.843329] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 17.843468] scsi0 : ata_piix [ 17.843558] scsi1 : ata_piix [ 17.843581] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011880 irq 14 [ 17.843584] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011888 irq 15 [ 17.862596] ata1.00: ATAPI: MATSHITADVD-RAM UJ-850, RB01, max UDMA/33 [ 17.868457] ata1.00: configured for UDMA/33 [ 17.868515] ata2: port disabled. ignoring. [ 17.869409] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850 RB01 PQ: 0 ANSI: 5 [ 17.869574] PCI: Enabling device 0000:15:00.1 (0000 -> 0002) [ 17.869580] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 17.869588] PCI: Setting latency timer of device 0000:15:00.1 to 64 [ 17.919800] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[e4302000-e43027ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 17.919871] ahci 0000:00:1f.2: version 2.2 [ 17.919894] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 17.928276] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 17.928282] Uniform CD-ROM driver Revision: 3.20 [ 17.928561] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 17.931899] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 17.956449] usb 5-5: new high speed USB device using ehci_hcd and address 3 [ 17.979580] usb 5-5: configuration #1 chosen from 1 choice [ 17.979735] hub 5-5:1.0: USB hub found [ 17.979855] hub 5-5:1.0: 2 ports detected [ 18.472938] usb 2-1: new low speed USB device using uhci_hcd and address 3 [ 18.616903] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode [ 18.616907] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 18.616912] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 18.617147] scsi2 : ahci [ 18.617345] scsi3 : ahci [ 18.617508] scsi4 : ahci [ 18.617673] scsi5 : ahci [ 18.617797] ata3: SATA max UDMA/133 cmd 0xffffc20000616500 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 506 [ 18.617802] ata4: SATA max UDMA/133 cmd 0xffffc20000616580 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 506 [ 18.617806] ata5: SATA max UDMA/133 cmd 0xffffc20000616600 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 506 [ 18.617810] ata6: SATA max UDMA/133 cmd 0xffffc20000616680 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 506 [ 18.647183] usb 2-1: configuration #1 chosen from 1 choice [ 18.884794] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b0020250749] [ 18.888713] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 19.066869] usb 3-2: configuration #1 chosen from 1 choice [ 19.069244] usbcore: registered new interface driver hiddev [ 19.086136] input: Logitech USB Receiver as /class/input/input2 [ 19.086152] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1 [ 19.086163] usbcore: registered new interface driver usbhid [ 19.086165] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 19.100920] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 19.101111] ata3.00: ATA-7: FUJITSU MHV2100BH, 00840029, max UDMA/100 [ 19.101114] ata3.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 19.103610] ata3.00: configured for UDMA/100 [ 19.412742] ata4: SATA link down (SStatus 0 SControl 0) [ 19.724571] ata5: SATA link down (SStatus 0 SControl 0) [ 20.036400] ata6: SATA link down (SStatus 0 SControl 0) [ 20.036193] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHV2100B 0084 PQ: 0 ANSI: 5 [ 20.036251] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 20.041927] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 20.041937] sd 2:0:0:0: [sda] Write Protect is off [ 20.041939] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.041951] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.041992] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 20.041999] sd 2:0:0:0: [sda] Write Protect is off [ 20.042001] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.042013] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.042016] sda: sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > [ 20.171839] sd 2:0:0:0: [sda] Attached SCSI disk [ 20.534993] Attempting manual resume [ 20.534996] swsusp: Resume From Partition 8:7 [ 20.534997] PM: Checking swsusp image. [ 20.535177] PM: Resume from disk failed. [ 20.543845] EXT3-fs: INFO: recovery required on readonly filesystem. [ 20.543848] EXT3-fs: write access will be enabled during recovery. [ 20.839105] kjournald starting. Commit interval 5 seconds [ 20.838807] EXT3-fs: recovery complete. [ 20.839150] EXT3-fs: mounted filesystem with ordered data mode. [ 24.766629] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100506, writing 100106) [ 25.583006] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 25.588632] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 25.810009] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2028] [ 25.810032] Yenta: Using INTVAL to route CSC interrupts to PCI [ 25.810034] Yenta: Routing CardBus interrupts to ISA [ 25.810039] Yenta TI: socket 0000:15:00.0, mfunc 0x01db1b22, devctl 0x64 [ 25.990286] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 25.991919] [fglrx] Maximum main memory to use for locked dma buffers: 922 MBytes. [ 25.991923] [fglrx] USWC is disabled in module parameters [ 25.991925] [fglrx] PAT is disabled! [ 25.991939] [fglrx] module loaded - fglrx 8.40.4 [Jul 31 2007] on minor 0 [ 26.001300] iTCO_vendor_support: vendor-support=0 [ 26.004070] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 26.004137] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 26.004171] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 26.012865] input: PC Speaker as /class/input/input3 [ 26.042558] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 26.042563] Socket status: 30000086 [ 26.042566] pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff [ 26.042569] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [ 26.042572] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [ 26.111254] ACPI: PCI Interrupt 0000:15:00.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.111262] PCI: Setting latency timer of device 0000:15:00.2 to 64 [ 26.154470] intel_rng: FWH not detected [ 26.178609] irda_init() [ 26.178623] NET: Registered protocol family 23 [ 26.223517] sdhci: Secure Digital Host Controller Interface driver [ 26.223520] sdhci: Copyright(c) Pierre Ossman [ 26.223558] sdhci: SDHCI controller found at 0000:15:00.3 [104c:803c] (rev 0) [ 26.223578] ACPI: PCI Interrupt 0000:15:00.3[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.224486] PCI: Setting latency timer of device 0000:15:00.3 to 64 [ 26.224562] mmc0: SDHCI at 0xe4302800 irq 16 DMA [ 26.283568] ieee80211_crypt: registered algorithm 'NULL' [ 26.294848] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 26.294851] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 26.346479] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp [ 26.346483] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 26.346645] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 26.346660] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 26.348032] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 26.595175] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 [ 26.596152] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 26.634775] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 26.634780] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 26.645404] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 26.649346] pnp: Device 00:0a activated. [ 26.649350] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 26.649370] nsc-ircc, chip->init [ 26.649383] nsc-ircc, Found chip at base=0x164e [ 26.649424] nsc-ircc, driver loaded (Dag Brattli) [ 26.649496] IrDA: Registered device irda0 [ 26.649498] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 27.613941] fuse init (API version 7.8) [ 27.930872] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [ 27.937163] lp: driver loaded but no devices found [ 28.008992] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 28.008996] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 28.008997] thinkpad_acpi: ThinkPad EC firmware 7FHT26WW-1.08 [ 28.074141] Adding 1461872k swap on /dev/sda7. Priority:-1 extents:1 across:1461872k [ 28.283784] EXT3 FS on sda8, internal journal [ 28.300658] ieee80211_crypt: registered algorithm 'WEP' [ 32.537792] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 32.775945] input: TPPS/2 IBM TrackPoint as /class/input/input5 [ 33.067881] kjournald starting. Commit interval 5 seconds [ 33.068217] EXT3 FS on sda6, internal journal [ 33.068221] EXT3-fs: mounted filesystem with ordered data mode. [ 33.090416] kjournald starting. Commit interval 5 seconds [ 33.090746] EXT3 FS on sda5, internal journal [ 33.090749] EXT3-fs: mounted filesystem with ordered data mode. [ 33.116392] kjournald starting. Commit interval 5 seconds [ 33.116681] EXT3 FS on sda9, internal journal [ 33.116683] EXT3-fs: mounted filesystem with ordered data mode. [ 33.149788] kjournald starting. Commit interval 5 seconds [ 33.150053] EXT3 FS on sda11, internal journal [ 33.150055] EXT3-fs: mounted filesystem with ordered data mode. [ 33.245708] kjournald starting. Commit interval 5 seconds [ 33.245974] EXT3 FS on sda10, internal journal [ 33.245976] EXT3-fs: mounted filesystem with ordered data mode. [ 34.071412] AppArmor: Unregistered secondary security module: capability [ 38.205868] ACPI: ACPI Dock Station Driver [ 38.225729] ACPI: AC Adapter [AC] (on-line) [ 38.233003] input: Power Button (FF) as /class/input/input6 [ 38.233022] ACPI: Power Button (FF) [PWRF] [ 38.233061] input: Lid Switch as /class/input/input7 [ 38.233076] ACPI: Lid Switch [LID] [ 38.233109] input: Sleep Button (CM) as /class/input/input8 [ 38.233126] ACPI: Sleep Button (CM) [SLPB] [ 38.271764] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay [ 38.271770] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler [ 38.271801] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added [ 38.279389] set_level status: 0 [ 38.279485] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 38.281193] set_level status: 0 [ 38.281291] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 38.332163] ACPI: Battery Slot [BAT0] (battery present) [ 40.654774] ppdev: user-space parallel port driver [ 41.735476] audit(1187822976.860:3): REJECTING w access to /dev/tty (cupsd(5256) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 42.058532] Non-volatile memory driver v1.2 [ 42.098804] input: /usr/sbin/thinkpad-keys as /class/input/input9 [ 42.911530] Uhhuh. NMI received for unknown reason a0. [ 42.911536] You have some hardware problem, likely on the PCI bus. [ 42.911538] Dazed and confused, but trying to continue [ 43.023365] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.148560] AppArmor: Registered secondary security module: capability. [ 43.148567] Capability LSM initialized as secondary [ 43.565533] Bluetooth: Core ver 2.11 [ 43.565643] NET: Registered protocol family 31 [ 43.565645] Bluetooth: HCI device and connection manager initialized [ 43.565649] Bluetooth: HCI socket layer initialized [ 43.579104] Bluetooth: L2CAP ver 2.8 [ 43.579108] Bluetooth: L2CAP socket layer initialized [ 43.769472] Bluetooth: RFCOMM socket layer initialized [ 43.769559] Bluetooth: RFCOMM TTY layer initialized [ 43.769562] Bluetooth: RFCOMM ver 1.8 [ 44.779065] [fglrx] total GART = 130023424 [ 44.779073] [fglrx] free GART = 114032640 [ 44.779077] [fglrx] max single GART = 114032640 [ 44.779081] [fglrx] total LFB = 134086656 [ 44.779085] [fglrx] free LFB = 46010368 [ 44.779088] [fglrx] max single LFB = 46010368 [ 44.779092] [fglrx] total Inv = 0 [ 44.779095] [fglrx] free Inv = 0 [ 44.779097] [fglrx] max single Inv = 0 [ 44.779101] [fglrx] total TIM = 0 [ 85.676137] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100506, writing 100106) [ 147.476614] NET: Registered protocol family 10 [ 147.476763] lo: Disabled Privacy Extensions [ 155.977556] eth1: no IPv6 routers present