[ 0.000000] Linux version 2.6.22-9-generic (buildd@yellow) (gcc version 4.1.3 20070718 (prerelease) (Ubuntu 4.1.2-14ubuntu1)) #1 SMP Fri Aug 3 00:20:35 GMT 2007 (Ubuntu 2.6.22-9.25-generic) [ 0.000000] Command line: root=UUID=165f9be9-0950-4f3e-b5ba-bd49a82dd99a ro quiet splash locale=de_DE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fed0000 (usable) [ 0.000000] BIOS-e820: 000000003fed0000 - 000000003fedf000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fedf000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 261840) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F67A0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 3FED1DA4, 0084 (r1 LENOVO TP-7F 2180 LTP 0) [ 0.000000] ACPI: FACP 3FED1F00, 00F4 (r3 LENOVO TP-7F 2180 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0434): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 3FED225E, CB63 (r1 LENOVO TP-7F 2180 MSFT 100000E) [ 0.000000] ACPI: FACS 3FEF4000, 0040 [ 0.000000] ACPI: SSDT 3FED20B4, 01AA (r1 LENOVO TP-7F 2180 MSFT 100000E) [ 0.000000] ACPI: ECDT 3FEDEDC1, 0052 (r1 LENOVO TP-7F 2180 LNVO 1) [ 0.000000] ACPI: TCPA 3FEDEE13, 0032 (r2 LENOVO TP-7F 2180 LNVO 1) [ 0.000000] ACPI: APIC 3FEDEE45, 0068 (r1 LENOVO TP-7F 2180 LNVO 1) [ 0.000000] ACPI: MCFG 3FEDEEAD, 003C (r1 LENOVO TP-7F 2180 LNVO 1) [ 0.000000] ACPI: HPET 3FEDEEE9, 0038 (r1 LENOVO TP-7F 2180 LNVO 1) [ 0.000000] ACPI: BOOT 3FEDEFD8, 0028 (r1 LENOVO TP-7F 2180 LTP 1) [ 0.000000] ACPI: SSDT 3FEF2686, 025F (r1 LENOVO TP-7F 2180 INTL 20050513) [ 0.000000] ACPI: SSDT 3FEF28E5, 00A6 (r1 LENOVO TP-7F 2180 INTL 20050513) [ 0.000000] ACPI: SSDT 3FEF298B, 04F7 (r1 LENOVO TP-7F 2180 INTL 20050513) [ 0.000000] ACPI: SSDT 3FEF2E82, 01D8 (r1 LENOVO TP-7F 2180 INTL 20050513) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fed0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 261840) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fed0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 261840 [ 0.000000] On node 0 totalpages: 261743 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1124 pages reserved [ 0.000000] DMA zone: 2819 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3523 pages used for memmap [ 0.000000] DMA32 zone: 254221 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 257040 [ 0.000000] Kernel command line: root=UUID=165f9be9-0950-4f3e-b5ba-bd49a82dd99a ro quiet splash locale=de_DE [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 15.071023] time.c: Detected 1994.999 MHz processor. [ 15.073372] Console: colour VGA+ 80x25 [ 15.073390] Checking aperture... [ 15.073404] Calgary: detecting Calgary via BIOS EBDA area [ 15.073406] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 15.086697] Memory: 1020804k/1047360k available (2271k kernel code, 26168k reserved, 1180k data, 300k init) [ 15.086748] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 15.164846] Calibrating delay using timer specific routine.. 3994.34 BogoMIPS (lpj=7988692) [ 15.164883] Security Framework v1.0.0 initialized [ 15.164891] SELinux: Disabled at boot. [ 15.165002] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 15.165825] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 15.166230] Mount-cache hash table entries: 256 [ 15.166378] CPU: L1 I cache: 32K, L1 D cache: 32K [ 15.166381] CPU: L2 cache: 4096K [ 15.166384] CPU 0/0 -> Node 0 [ 15.166386] using mwait in idle threads. [ 15.166387] CPU: Physical Processor ID: 0 [ 15.166389] CPU: Processor Core ID: 0 [ 15.166395] CPU0: Thermal monitoring enabled (TM2) [ 15.166407] SMP alternatives: switching to UP code [ 15.166699] Early unpacking initramfs... done [ 15.496791] ACPI: Core revision 20070126 [ 15.496859] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 15.555903] Using local APIC timer interrupts. [ 15.606004] result 10390607 [ 15.606006] Detected 10.390 MHz APIC timer. [ 15.608652] SMP alternatives: switching to SMP code [ 15.608748] Booting processor 1/2 APIC 0x1 [ 15.619765] Initializing CPU#1 [ 15.696857] Calibrating delay using timer specific routine.. 3990.10 BogoMIPS (lpj=7980217) [ 15.696864] CPU: L1 I cache: 32K, L1 D cache: 32K [ 15.696866] CPU: L2 cache: 4096K [ 15.696868] CPU 1/1 -> Node 0 [ 15.696870] CPU: Physical Processor ID: 0 [ 15.696871] CPU: Processor Core ID: 1 [ 15.696877] CPU1: Thermal monitoring enabled (TM2) [ 15.697380] Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 15.700564] Brought up 2 CPUs [ 15.749135] migration_cost=38 [ 15.748999] NET: Registered protocol family 16 [ 15.749078] ACPI: bus type pci registered [ 15.749084] PCI: Using configuration type 1 [ 15.750485] ACPI: EC: Found ECDT [ 15.758253] ACPI: Interpreter enabled [ 15.758255] ACPI: (supports S0 S3 S4 S5) [ 15.758271] ACPI: Using IOAPIC for interrupt routing [ 15.765772] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 15.765820] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 15.765826] PCI: Probing PCI hardware (bus 00) [ 15.766528] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 15.766532] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 15.768026] PCI: Transparent bridge - 0000:00:1e.0 [ 15.768182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 15.768340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 15.768454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 15.768590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 15.768705] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 15.768823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 15.768940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 15.771729] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 15.771923] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 15.772115] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 15.772306] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 15.772497] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 15.772692] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 15.772883] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 15.773073] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 15.773345] ACPI: Power Resource [PUBS] (on) [ 15.773363] Linux Plug and Play Support v0.97 (c) Adam Belay [ 15.773376] pnp: PnP ACPI init [ 15.773383] ACPI: bus type pnp registered [ 15.776675] pnp: PnP ACPI: found 12 devices [ 15.776677] ACPI: ACPI bus type pnp unregistered [ 15.776723] PCI: Using ACPI for IRQ routing [ 15.776725] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 15.776888] NET: Registered protocol family 8 [ 15.776890] NET: Registered protocol family 20 [ 15.776903] PCI-GART: No AMD northbridge found. [ 15.776909] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 15.776912] hpet0: 3 64-bit timers, 14318180 Hz [ 15.777957] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 15.777960] pnp: 00:00: iomem range 0xc0000-0xc3fff has been reserved [ 15.777962] pnp: 00:00: iomem range 0xc4000-0xc7fff has been reserved [ 15.777964] pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 15.777969] pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 15.777972] pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 15.777975] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 15.777978] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 15.778260] PCI: Bridge: 0000:00:01.0 [ 15.778263] IO window: 2000-2fff [ 15.778266] MEM window: ee000000-ee0fffff [ 15.778270] PREFETCH window: d8000000-dfffffff [ 15.778273] PCI: Bridge: 0000:00:1c.0 [ 15.778274] IO window: disabled. [ 15.778280] MEM window: ee100000-ee1fffff [ 15.778284] PREFETCH window: disabled. [ 15.778290] PCI: Bridge: 0000:00:1c.1 [ 15.778293] IO window: 3000-4fff [ 15.778299] MEM window: ec000000-edffffff [ 15.778303] PREFETCH window: e4000000-e40fffff [ 15.778309] PCI: Bridge: 0000:00:1c.2 [ 15.778311] IO window: 5000-6fff [ 15.778317] MEM window: e8000000-e9ffffff [ 15.778322] PREFETCH window: e4100000-e41fffff [ 15.778327] PCI: Bridge: 0000:00:1c.3 [ 15.778330] IO window: 7000-8fff [ 15.778336] MEM window: ea000000-ebffffff [ 15.778340] PREFETCH window: e4200000-e42fffff [ 15.778348] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 15.778350] IO window: 00009000-000090ff [ 15.778355] IO window: 00009400-000094ff [ 15.778360] PREFETCH window: e0000000-e3ffffff [ 15.778365] MEM window: 50000000-53ffffff [ 15.778370] PCI: Bridge: 0000:00:1e.0 [ 15.778373] IO window: 9000-cfff [ 15.778379] MEM window: e4300000-e7ffffff [ 15.778383] PREFETCH window: e0000000-e3ffffff [ 15.778398] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.778403] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 15.778425] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 15.778430] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 15.778453] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 15.778458] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 15.778480] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 15.778486] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 15.778508] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 15.778513] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 15.778524] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 15.778529] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 15.778546] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.778558] NET: Registered protocol family 2 [ 15.780504] Time: hpet clocksource has been installed. [ 15.816526] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 15.816869] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) [ 15.818159] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 15.818734] TCP: Hash tables configured (established 131072 bind 65536) [ 15.818737] TCP reno registered [ 15.832617] checking if image is initramfs... it is [ 16.484108] Freeing initrd memory: 7181k freed [ 16.487554] Simple Boot Flag at 0x35 set to 0x1 [ 16.488480] audit: initializing netlink socket (disabled) [ 16.488503] audit(1187398734.368:1): initialized [ 16.490594] VFS: Disk quotas dquot_6.5.1 [ 16.490641] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 16.490732] io scheduler noop registered [ 16.490733] io scheduler anticipatory registered [ 16.490735] io scheduler deadline registered [ 16.490825] io scheduler cfq registered (default) [ 16.493534] Boot video device is 0000:01:00.0 [ 16.493664] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 16.493697] assign_interrupt_mode Found MSI capability [ 16.493724] Allocate Port Service[0000:00:01.0:pcie00] [ 16.493804] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 16.493860] assign_interrupt_mode Found MSI capability [ 16.493904] Allocate Port Service[0000:00:1c.0:pcie00] [ 16.493937] Allocate Port Service[0000:00:1c.0:pcie02] [ 16.494033] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 16.494088] assign_interrupt_mode Found MSI capability [ 16.494132] Allocate Port Service[0000:00:1c.1:pcie00] [ 16.494163] Allocate Port Service[0000:00:1c.1:pcie02] [ 16.494260] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 16.494315] assign_interrupt_mode Found MSI capability [ 16.494359] Allocate Port Service[0000:00:1c.2:pcie00] [ 16.494389] Allocate Port Service[0000:00:1c.2:pcie02] [ 16.494485] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 16.494540] assign_interrupt_mode Found MSI capability [ 16.494584] Allocate Port Service[0000:00:1c.3:pcie00] [ 16.494615] Allocate Port Service[0000:00:1c.3:pcie02] [ 16.515572] Real Time Clock Driver v1.12ac [ 16.515671] hpet_resources: 0xfed00000 is busy [ 16.515715] Linux agpgart interface v0.102 (c) Dave Jones [ 16.515718] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 16.516989] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 16.517118] input: Macintosh mouse button emulation as /class/input/input0 [ 16.517198] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 16.525625] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 16.525630] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 16.525773] mice: PS/2 mouse device common for all mice [ 16.525962] TCP cubic registered [ 16.526023] NET: Registered protocol family 1 [ 16.526209] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 16.526216] Freeing unused kernel memory: 300k freed [ 16.532129] input: AT Translated Set 2 keyboard as /class/input/input1 [ 17.681615] AppArmor: AppArmor initialized [ 17.681622] audit(1187398735.556:2): AppArmor initialized [ 17.681624] [ 17.684465] AppArmor: Registered secondary security module: capability. [ 17.684468] Capability LSM initialized as secondary [ 17.690455] ACPI: SSDT 3FEF1D25, 0282 (r1 PmRef Cpu0Ist 100 INTL 20050513) [ 17.690726] ACPI: SSDT 3FEF202C, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513) [ 17.691621] Monitor-Mwait will be used to enter C-1 state [ 17.691623] Monitor-Mwait will be used to enter C-2 state [ 17.691625] Monitor-Mwait will be used to enter C-3 state [ 17.691629] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 17.691635] ACPI: Processor [CPU0] (supports 8 throttling states) [ 17.691843] ACPI: SSDT 3FEF1C5D, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) [ 17.692085] ACPI: SSDT 3FEF1FA7, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) [ 17.693280] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 17.693285] ACPI: Processor [CPU1] (supports 8 throttling states) [ 17.695193] ACPI: Thermal Zone [THM0] (54 C) [ 17.696729] ACPI: Thermal Zone [THM1] (51 C) [ 18.041291] usbcore: registered new interface driver usbfs [ 18.041313] usbcore: registered new interface driver hub [ 18.041334] usbcore: registered new device driver usb [ 18.041906] USB Universal Host Controller Interface driver v3.0 [ 18.041997] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 18.042007] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 18.042011] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 18.042159] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 18.042191] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 18.042285] usb usb1: configuration #1 chosen from 1 choice [ 18.042307] hub 1-0:1.0: USB hub found [ 18.042311] hub 1-0:1.0: 2 ports detected [ 18.055806] SCSI subsystem initialized [ 18.059844] libata version 2.21 loaded. [ 18.133411] ahci 0000:00:1f.2: version 2.2 [ 18.133444] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 18.155202] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode [ 18.155206] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 18.155211] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 18.155709] scsi0 : ahci [ 18.155881] scsi1 : ahci [ 18.156021] scsi2 : ahci [ 18.156161] scsi3 : ahci [ 18.156295] ata1: SATA max UDMA/133 cmd 0xffffc20000606500 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 506 [ 18.156299] ata2: SATA max UDMA/133 cmd 0xffffc20000606580 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 506 [ 18.156304] ata3: SATA max UDMA/133 cmd 0xffffc20000606600 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 506 [ 18.156308] ata4: SATA max UDMA/133 cmd 0xffffc20000606680 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 506 [ 18.163926] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 18.164409] ata1.00: ATA-7: FUJITSU MHV2100BH, 00840029, max UDMA/100 [ 18.164412] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 18.166906] ata1.00: configured for UDMA/100 [ 18.171758] ata2: SATA link down (SStatus 0 SControl 0) [ 18.176618] ata3: SATA link down (SStatus 0 SControl 0) [ 18.181469] ata4: SATA link down (SStatus 0 SControl 0) [ 18.181546] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100B 0084 PQ: 0 ANSI: 5 [ 18.182167] tg3.c:v3.77 (May 31, 2007) [ 18.182189] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 18.182202] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 18.182978] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 18.182991] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 18.182995] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 18.183964] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 18.183997] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 [ 18.184356] usb usb2: configuration #1 chosen from 1 choice [ 18.184489] hub 2-0:1.0: USB hub found [ 18.184495] hub 2-0:1.0: 2 ports detected [ 18.189666] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 18.189676] sd 0:0:0:0: [sda] Write Protect is off [ 18.189678] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 18.189691] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.189732] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 18.191014] sd 0:0:0:0: [sda] Write Protect is off [ 18.191017] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 18.191036] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.191040] sda:<6>eth0: Tigon3 [partno(BCM95752m) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:36:ae:b6:e0 [ 18.202860] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 18.202862] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 18.220199] sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > [ 18.273713] sd 0:0:0:0: [sda] Attached SCSI disk [ 18.276550] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 18.285499] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 18.285510] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 18.285513] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 18.285535] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 18.285566] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 18.285652] usb usb3: configuration #1 chosen from 1 choice [ 18.285672] hub 3-0:1.0: USB hub found [ 18.285676] hub 3-0:1.0: 2 ports detected [ 18.389457] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 18.389470] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 18.389474] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 18.389499] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 18.389531] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 [ 18.389624] usb usb4: configuration #1 chosen from 1 choice [ 18.389643] hub 4-0:1.0: USB hub found [ 18.389648] hub 4-0:1.0: 2 ports detected [ 18.493688] ata_piix 0000:00:1f.1: version 2.11 [ 18.493704] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 18.493743] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 18.494056] scsi4 : ata_piix [ 18.494332] scsi5 : ata_piix [ 18.494357] ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011880 irq 14 [ 18.494360] ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011888 irq 15 [ 18.525264] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 18.666086] Attempting manual resume [ 18.666089] swsusp: Resume From Partition 8:7 [ 18.666091] PM: Checking swsusp image. [ 18.666287] PM: Resume from disk failed. [ 18.674106] EXT3-fs: INFO: recovery required on readonly filesystem. [ 18.674109] EXT3-fs: write access will be enabled during recovery. [ 18.699833] usb 2-1: configuration #1 chosen from 1 choice [ 18.813621] ata5.00: ATAPI: MATSHITADVD-RAM UJ-850, RB01, max UDMA/33 [ 18.941034] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 18.985528] ata5.00: configured for UDMA/33 [ 18.985571] ata6: port disabled. ignoring. [ 18.987834] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850 RB01 PQ: 0 ANSI: 5 [ 18.987894] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 18.987653] PCI: Enabling device 0000:15:00.1 (0000 -> 0002) [ 18.987661] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 18.987672] PCI: Setting latency timer of device 0000:15:00.1 to 64 [ 18.989551] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 [ 18.990400] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 18.990408] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 18.990455] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 18.990492] ehci_hcd 0000:00:1d.7: debug port 1 [ 18.990498] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 18.990506] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000 [ 18.994390] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 18.994476] usb usb5: configuration #1 chosen from 1 choice [ 18.994500] hub 5-0:1.0: USB hub found [ 18.994505] hub 5-0:1.0: 8 ports detected [ 19.037884] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[e4302000-e43027ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 19.046582] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 19.046588] Uniform CD-ROM driver Revision: 3.20 [ 19.046881] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 19.086545] kjournald starting. Commit interval 5 seconds [ 19.086245] EXT3-fs: recovery complete. [ 19.086785] EXT3-fs: mounted filesystem with ordered data mode. [ 19.123938] exe[2623]: segfault at 0000000000000000 rip 0000000000424b07 rsp 00007fffd8c752d8 error 4 [ 19.125069] exe[2626]: segfault at 0000000000000000 rip 0000000000424b07 rsp 00007fff6afc9638 error 4 [ 19.125035] exe[2627]: segfault at 0000000000000000 rip 0000000000424b07 rsp 00007fff87b751d8 error 4 [ 19.126425] usb 2-1: USB disconnect, address 2 [ 19.126578] usbcore: registered new interface driver hiddev [ 19.678066] usb 5-5: new high speed USB device using ehci_hcd and address 3 [ 19.810130] usb 5-5: configuration #1 chosen from 1 choice [ 19.810320] hub 5-5:1.0: USB hub found [ 19.810424] hub 5-5:1.0: 2 ports detected [ 20.153852] usbcore: registered new interface driver usbhid [ 20.153855] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 20.301484] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b0020250749] [ 20.393358] usb 2-1: new low speed USB device using uhci_hcd and address 3 [ 20.567911] usb 2-1: configuration #1 chosen from 1 choice [ 20.588068] input: Logitech USB Receiver as /class/input/input2 [ 20.588084] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1 [ 20.825151] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 21.003330] usb 3-2: configuration #1 chosen from 1 choice [ 22.810444] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100506, writing 100106) [ 23.636826] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 23.639755] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.782374] iTCO_vendor_support: vendor-support=0 [ 23.824169] input: PC Speaker as /class/input/input3 [ 23.839014] ieee80211_crypt: registered algorithm 'NULL' [ 23.840822] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 23.840824] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 23.877970] ACPI: PCI Interrupt 0000:15:00.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.877979] PCI: Setting latency timer of device 0000:15:00.2 to 64 [ 23.878977] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 23.879040] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 23.879075] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 23.956063] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 23.958590] [fglrx] Maximum main memory to use for locked dma buffers: 922 MBytes. [ 23.958593] [fglrx] USWC is disabled in module parameters [ 23.958595] [fglrx] PAT is disabled! [ 23.958610] [fglrx] module loaded - fglrx 8.40.4 [Jul 31 2007] on minor 0 [ 23.985359] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.1mp [ 23.985362] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 23.985509] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 23.985523] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 23.988490] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 24.030465] intel_rng: FWH not detected [ 24.058852] sdhci: Secure Digital Host Controller Interface driver [ 24.058855] sdhci: Copyright(c) Pierre Ossman [ 24.060949] sdhci: SDHCI controller found at 0000:15:00.3 [104c:803c] (rev 0) [ 24.060972] ACPI: PCI Interrupt 0000:15:00.3[A] -> GSI 16 (level, low) -> IRQ 16 [ 24.061874] PCI: Setting latency timer of device 0000:15:00.3 to 64 [ 24.062169] mmc0: SDHCI at 0xe4302800 irq 16 DMA [ 24.101792] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2028] [ 24.101816] Yenta: Using INTVAL to route CSC interrupts to PCI [ 24.101818] Yenta: Routing CardBus interrupts to ISA [ 24.101824] Yenta TI: socket 0000:15:00.0, mfunc 0x01db1b22, devctl 0x64 [ 24.206402] irda_init() [ 24.206413] NET: Registered protocol family 23 [ 24.332358] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 24.332362] Socket status: 30000086 [ 24.332366] pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff [ 24.332369] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [ 24.332371] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [ 24.386927] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 [ 24.387931] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 24.485592] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 24.485613] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 24.530116] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 24.534388] pnp: Device 00:0a activated. [ 24.534392] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 24.534443] nsc-ircc, chip->init [ 24.534457] nsc-ircc, Found chip at base=0x164e [ 24.534499] nsc-ircc, driver loaded (Dag Brattli) [ 24.534661] IrDA: Registered device irda0 [ 24.534663] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 25.095873] fuse init (API version 7.8) [ 25.144350] lp: driver loaded but no devices found [ 25.192618] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 25.192621] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 25.192623] thinkpad_acpi: ThinkPad EC firmware 7FHT26WW-1.08 [ 25.265276] Adding 1461872k swap on /dev/sda7. Priority:-1 extents:1 across:1461872k [ 25.410380] EXT3 FS on sda8, internal journal [ 25.752141] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [ 26.173824] ieee80211_crypt: registered algorithm 'WEP' [ 30.199532] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 30.437958] input: TPPS/2 IBM TrackPoint as /class/input/input5 [ 30.623970] kjournald starting. Commit interval 5 seconds [ 30.624291] EXT3 FS on sda6, internal journal [ 30.624295] EXT3-fs: mounted filesystem with ordered data mode. [ 30.665339] kjournald starting. Commit interval 5 seconds [ 30.665633] EXT3 FS on sda5, internal journal [ 30.665635] EXT3-fs: mounted filesystem with ordered data mode. [ 30.691313] kjournald starting. Commit interval 5 seconds [ 30.691567] EXT3 FS on sda9, internal journal [ 30.691570] EXT3-fs: mounted filesystem with ordered data mode. [ 30.724709] kjournald starting. Commit interval 5 seconds [ 30.725003] EXT3 FS on sda11, internal journal [ 30.725006] EXT3-fs: mounted filesystem with ordered data mode. [ 30.742896] kjournald starting. Commit interval 5 seconds [ 30.743200] EXT3 FS on sda10, internal journal [ 30.743203] EXT3-fs: mounted filesystem with ordered data mode. [ 31.535558] AppArmor: Unregistered secondary security module: capability [ 35.692314] ACPI: ACPI Dock Station Driver [ 35.698523] ACPI: AC Adapter [AC] (on-line) [ 35.707623] input: Power Button (FF) as /class/input/input6 [ 35.707641] ACPI: Power Button (FF) [PWRF] [ 35.707683] input: Lid Switch as /class/input/input7 [ 35.707697] ACPI: Lid Switch [LID] [ 35.707729] input: Sleep Button (CM) as /class/input/input8 [ 35.707743] ACPI: Sleep Button (CM) [SLPB] [ 35.737455] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay [ 35.737462] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler [ 35.737493] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added [ 35.751223] set_level status: 0 [ 35.751319] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 35.753536] set_level status: 0 [ 35.753636] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 35.792723] ACPI: Battery Slot [BAT0] (battery present) [ 37.882013] ppdev: user-space parallel port driver [ 38.834701] audit(1187398759.888:3): REJECTING w access to /etc/printcap (cupsd(5227) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 38.878530] audit(1187398759.932:4): REJECTING w access to /dev/tty (cupsd(5227) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 39.197016] Non-volatile memory driver v1.2 [ 39.228958] input: /usr/sbin/thinkpad-keys as /class/input/input9 [ 40.022280] Uhhuh. NMI received for unknown reason a0. [ 40.022289] You have some hardware problem, likely on the PCI bus. [ 40.022291] Dazed and confused, but trying to continue [ 40.053211] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 40.069623] AppArmor: Registered secondary security module: capability. [ 40.069626] Capability LSM initialized as secondary [ 40.372889] Bluetooth: Core ver 2.11 [ 40.372991] NET: Registered protocol family 31 [ 40.372994] Bluetooth: HCI device and connection manager initialized [ 40.372997] Bluetooth: HCI socket layer initialized [ 40.382740] Bluetooth: L2CAP ver 2.8 [ 40.382744] Bluetooth: L2CAP socket layer initialized [ 40.655028] Bluetooth: RFCOMM socket layer initialized [ 40.655101] Bluetooth: RFCOMM TTY layer initialized [ 40.655103] Bluetooth: RFCOMM ver 1.8 [ 41.661809] [fglrx] total GART = 130023424 [ 41.661817] [fglrx] free GART = 114032640 [ 41.661821] [fglrx] max single GART = 114032640 [ 41.661825] [fglrx] total LFB = 134086656 [ 41.661829] [fglrx] free LFB = 46010368 [ 41.661833] [fglrx] max single LFB = 46010368 [ 41.661836] [fglrx] total Inv = 0 [ 41.661839] [fglrx] free Inv = 0 [ 41.661842] [fglrx] max single Inv = 0 [ 41.661845] [fglrx] total TIM = 0 [ 80.298418] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100506, writing 100106) [ 80.331394] audit(1187398803.182:5): REJECTING access to capability 'dac_override' (cupsd(5227) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 84.332560] NET: Registered protocol family 10 [ 84.332801] lo: Disabled Privacy Extensions [ 94.764128] eth1: no IPv6 routers present