[ 0.000000] Linux version 2.6.22-6-generic (buildd@rothera) (gcc version 4.1.3 20070528 (prerelease) (Ubuntu 4.1.2-9ubuntu2)) #1 SMP Fri Jun 1 19:24:12 GMT 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002de90000 (usable) [ 0.000000] BIOS-e820: 000000002de90000 - 000000002de9c000 (ACPI data) [ 0.000000] BIOS-e820: 000000002de9c000 - 000000002df00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000002df00000 - 000000002e000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 734MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7090 [ 0.000000] Entering add_active_range(0, 0, 188048) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 188048 [ 0.000000] HighMem 188048 -> 188048 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 188048 [ 0.000000] On node 0 totalpages: 188048 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1437 pages used for memmap [ 0.000000] Normal zone: 182515 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7000, 0014 (r0 Acer ) [ 0.000000] ACPI: RSDT 2DE95A7A, 0038 (r1 Acer RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 2DE9BF0A, 0074 (r1 Acer GrapeII 6040000 ATI F4240) [ 0.000000] ACPI: DSDT 2DE961D7, 5D33 (r1 Acer BONEFISH 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 2DE9CFC0, 0040 [ 0.000000] ACPI: APIC 2DE9BF7E, 0046 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG 2DE9BFC4, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: SSDT 2DE95FE7, 01F0 (r1 PmRef Cpu0Cst 3001 INTL 20050228) [ 0.000000] ACPI: SSDT 2DE95AB2, 0535 (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 2e000000:b2000000) [ 0.000000] Built 1 zonelists. Total pages: 186579 [ 0.000000] Kernel command line: root=UUID=2662cc64-6aa6-4c69-8d56-6ef2220ebe3a ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1466.733 MHz processor. [ 19.594700] Console: colour VGA+ 80x25 [ 19.595717] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 19.596482] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 19.621492] Memory: 734232k/752192k available (2002k kernel code, 17348k reserved, 913k data, 360k init, 0k highmem) [ 19.621503] virtual kernel memory layout: [ 19.621504] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 19.621506] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 19.621508] vmalloc : 0xee800000 - 0xff7fe000 ( 271 MB) [ 19.621509] lowmem : 0xc0000000 - 0xede90000 ( 734 MB) [ 19.621511] .init : 0xc03df000 - 0xc0439000 ( 360 kB) [ 19.621512] .data : 0xc02f4a8a - 0xc03d90d4 ( 913 kB) [ 19.621514] .text : 0xc0100000 - 0xc02f4a8a (2002 kB) [ 19.621518] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 19.621564] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, Processors=1, Nodes=1 [ 19.701581] Calibrating delay using timer specific routine.. 2937.04 BogoMIPS (lpj=5874083) [ 19.701612] Security Framework v1.0.0 initialized [ 19.701622] SELinux: Disabled at boot. [ 19.701638] Mount-cache hash table entries: 512 [ 19.701781] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000 [ 19.701791] monitor/mwait feature present. [ 19.701793] using mwait in idle threads. [ 19.701798] CPU: L1 I cache: 32K, L1 D cache: 32K [ 19.701801] CPU: L2 cache: 1024K [ 19.701805] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002940 0000c109 00000000 00000000 [ 19.701817] Compat vDSO mapped to ffffe000. [ 19.701831] Checking 'hlt' instruction... OK. [ 19.717703] SMP alternatives: switching to UP code [ 19.717903] Freeing SMP alternatives: 11k freed [ 19.718088] ACPI: Core revision 20070126 [ 20.135115] CPU0: Intel(R) Celeron(R) M CPU 410 @ 1.46GHz stepping 08 [ 20.135146] Total of 1 processors activated (2937.04 BogoMIPS). [ 20.135324] ENABLING IO-APIC IRQs [ 20.135531] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 20.281541] Brought up 1 CPUs [ 20.281667] Booting paravirtualized kernel on bare hardware [ 20.281760] Time: 0:32:53 Date: 05/20/107 [ 20.281786] NET: Registered protocol family 16 [ 20.281890] EISA bus registered [ 20.281910] ACPI: bus type pci registered [ 20.281924] PCI: Using MMCONFIG [ 20.282918] Setting up standard PCI resources [ 20.290878] ACPI: Interpreter enabled [ 20.290883] ACPI: (supports S0 S3 S4 S5) [ 20.290900] ACPI: Using IOAPIC for interrupt routing [ 20.334485] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.334501] PCI: Probing PCI hardware (bus 00) [ 20.335565] PCI: Transparent bridge - 0000:00:14.4 [ 20.335665] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.335884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 20.336048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 20.338048] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 20.338193] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 20.338334] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 20.338475] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 20.338616] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 20.338753] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 20.338894] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 20.339035] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 20.339176] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. [ 20.339280] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.339291] pnp: PnP ACPI init [ 20.339304] ACPI: bus type pnp registered [ 20.361576] pnp: PnP ACPI: found 10 devices [ 20.361579] ACPI: ACPI bus type pnp unregistered [ 20.361584] PnPBIOS: Disabled by ACPI PNP [ 20.361632] PCI: Using ACPI for IRQ routing [ 20.361635] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.361727] NET: Registered protocol family 8 [ 20.361729] NET: Registered protocol family 20 [ 20.361796] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 20.361806] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved [ 20.361809] pnp: 00:08: ioport range 0x220-0x22f has been reserved [ 20.361812] pnp: 00:08: ioport range 0x40b-0x40b has been reserved [ 20.361816] pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 20.361821] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 20.361825] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved [ 20.361829] pnp: 00:09: iomem range 0x0-0xfff could not be reserved [ 20.365492] Time: tsc clocksource has been installed. [ 20.392148] PCI: Bridge: 0000:00:01.0 [ 20.392151] IO window: 9000-9fff [ 20.392155] MEM window: d0000000-d00fffff [ 20.392159] PREFETCH window: d4000000-d7ffffff [ 20.392170] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 20.392172] IO window: 0000a400-0000a4ff [ 20.392179] IO window: 0000a800-0000a8ff [ 20.392185] PREFETCH window: 30000000-33ffffff [ 20.392191] MEM window: 34000000-37ffffff [ 20.392197] PCI: Bridge: 0000:00:14.4 [ 20.392201] IO window: a000-afff [ 20.392208] MEM window: d0100000-d01fffff [ 20.392214] PREFETCH window: 30000000-33ffffff [ 20.392253] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 20.392272] NET: Registered protocol family 2 [ 20.429525] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 20.429684] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 20.431976] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 20.432780] TCP: Hash tables configured (established 131072 bind 65536) [ 20.432785] TCP reno registered [ 20.441716] checking if image is initramfs... it is [ 20.893424] Switched to high resolution mode on CPU 0 [ 21.202079] Freeing initrd memory: 6805k freed [ 21.202685] audit: initializing netlink socket (disabled) [ 21.202705] audit(1182299573.728:1): initialized [ 21.204912] VFS: Disk quotas dquot_6.5.1 [ 21.204973] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 21.205091] io scheduler noop registered [ 21.205093] io scheduler anticipatory registered [ 21.205096] io scheduler deadline registered [ 21.205113] io scheduler cfq registered (default) [ 21.205169] Boot video device is 0000:01:05.0 [ 21.205408] isapnp: Scanning for PnP cards... [ 21.562581] isapnp: No Plug & Play device found [ 21.592357] Real Time Clock Driver v1.12ac [ 21.592489] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 21.593837] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 21.594093] input: Macintosh mouse button emulation as /class/input/input0 [ 21.594183] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 21.594552] i8042.c: Detected active multiplexing controller, rev 1.1. [ 21.594633] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 21.594639] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 21.594643] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 21.594646] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 21.594649] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 21.594840] mice: PS/2 mouse device common for all mice [ 21.595153] EISA: Probing bus 0 at eisa.0 [ 21.595166] Cannot allocate resource for EISA slot 1 [ 21.595197] Cannot allocate resource for EISA slot 8 [ 21.595199] EISA: Detected 0 cards. [ 21.595418] TCP cubic registered [ 21.595441] NET: Registered protocol family 1 [ 21.595471] Using IPI No-Shortcut mode [ 21.595650] Magic number: 11:974:506 [ 21.596255] Freeing unused kernel memory: 360k freed [ 21.633278] input: AT Translated Set 2 keyboard as /class/input/input1 [ 22.809275] Capability LSM initialized [ 22.818449] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 22.818467] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 23.277264] usbcore: registered new interface driver usbfs [ 23.277296] usbcore: registered new interface driver hub [ 23.277320] usbcore: registered new device driver usb [ 23.278143] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 23.278195] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 23.278210] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 23.278452] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 23.278480] ohci_hcd 0000:00:13.0: irq 17, io mem 0xd0404000 [ 23.338711] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 23.338719] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 23.350552] usb usb1: configuration #1 chosen from 1 choice [ 23.350583] hub 1-0:1.0: USB hub found [ 23.350602] hub 1-0:1.0: 4 ports detected [ 23.415811] 8139too Fast Ethernet driver 0.9.28 [ 23.452874] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17 [ 23.452898] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 23.452928] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 23.452950] ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0405000 [ 23.508877] usb usb2: configuration #1 chosen from 1 choice [ 23.508909] hub 2-0:1.0: USB hub found [ 23.508925] hub 2-0:1.0: 4 ports detected [ 23.612931] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17 [ 23.612949] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 23.612979] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 23.613036] ehci_hcd 0000:00:13.2: irq 17, io mem 0xd0406000 [ 23.613050] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.613141] usb usb3: configuration #1 chosen from 1 choice [ 23.613169] hub 3-0:1.0: USB hub found [ 23.613179] hub 3-0:1.0: 8 ports detected [ 3.568000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.572000] Time: acpi_pm clocksource has been installed. [ 3.580000] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 3.580000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18 [ 3.580000] ATIIXP: chipset revision 128 [ 3.580000] ATIIXP: not 100% native mode: will probe irqs later [ 3.580000] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:DMA [ 3.580000] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:pio, hdd:pio [ 3.580000] Probing IDE interface ide0... [ 3.868000] hda: HTS421240H9AT00, ATA DISK drive [ 4.652000] hdb: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive [ 4.708000] hda: selected mode 0x45 [ 4.708000] hdb: selected mode 0x42 [ 4.708000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.724000] Probing IDE interface ide1... [ 5.300000] SCSI subsystem initialized [ 5.308000] libata version 2.21 loaded. [ 5.308000] ACPI: PCI Interrupt 0000:09:06.0[A] -> GSI 22 (level, low) -> IRQ 19 [ 5.308000] eth0: RealTek RTL8139 at 0xee834000, 00:16:d4:16:66:81, IRQ 19 [ 5.308000] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 5.312000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 5.320000] hda: max request size: 512KiB [ 5.328000] hda: 78140160 sectors (40007 MB) w/1570KiB Cache, CHS=16383/255/63, UDMA(100) [ 5.328000] hda: cache flushes supported [ 5.328000] hda: hda1 hda2 hda3 < hda5 hda6 hda7 > [ 5.416000] hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 5.416000] Uniform CD-ROM driver Revision: 3.20 [ 6.108000] Attempting manual resume [ 6.108000] swsusp: Resume From Partition 3:5 [ 6.108000] PM: Checking swsusp image. [ 6.116000] PM: Resume from disk failed. [ 6.168000] kjournald starting. Commit interval 5 seconds [ 6.168000] EXT3-fs: mounted filesystem with ordered data mode. [ 21.592000] eth0: link down [ 22.976000] Linux agpgart interface v0.102 (c) Dave Jones [ 23.052000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 23.060000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.228000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 23.552000] NET: Registered protocol family 17 [ 23.564000] ath_hal: module license 'Proprietary' taints kernel. [ 23.564000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 23.796000] wlan: 0.8.4.2 (0.9.3) [ 24.156000] ath_pci: 0.9.4.5 (0.9.3) [ 24.156000] ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 24.980000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 [ 24.988000] ath_rate_sample: 1.2 (0.9.3) [ 24.988000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 24.988000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 24.988000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 24.988000] wifi0: mac 7.8 phy 4.5 radio 5.6 [ 24.988000] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 24.988000] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 24.988000] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 24.988000] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 24.988000] wifi0: Use hw queue 8 for CAB traffic [ 24.988000] wifi0: Use hw queue 9 for beacons [ 25.008000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [ 25.036000] wifi0: Atheros 5212: mem=0xd0100000, irq=20 [ 25.056000] Yenta: CardBus bridge found at 0000:09:04.0 [1025:0109] [ 25.056000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 25.056000] Yenta: Routing CardBus interrupts to PCI [ 25.056000] Yenta TI: socket 0000:09:04.0, mfunc 0x00111212, devctl 0x44 [ 25.172000] input: PC Speaker as /class/input/input3 [ 25.292000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 25.292000] Socket status: 30000006 [ 25.292000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff [ 25.292000] cs: IO port probe 0xa000-0xafff: clean. [ 25.292000] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff [ 25.292000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff [ 25.608000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18 [ 25.648000] cs: IO port probe 0x100-0x3af: clean. [ 25.652000] cs: IO port probe 0x3e0-0x4ff: clean. [ 25.652000] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f [ 25.652000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf [ 25.652000] cs: IO port probe 0xa00-0xaff: clean. [ 26.636000] fuse init (API version 7.8) [ 26.720000] lp: driver loaded but no devices found [ 26.756000] [fglrx] Maximum main memory to use for locked dma buffers: 647 MBytes. [ 26.756000] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0 [ 26.820000] Adding 979924k swap on /dev/disk/by-uuid/9880c316-c78f-4eaf-889d-3a909399930d. Priority:-1 extents:1 across:979924k [ 27.116000] EXT3 FS on hda7, internal journal [ 29.332000] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 29.408000] NTFS volume version 3.1. [ 29.460000] kjournald starting. Commit interval 5 seconds [ 29.460000] EXT3 FS on hda2, internal journal [ 29.464000] EXT3-fs: mounted filesystem with ordered data mode. [ 33.800000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 33.848000] ACPI: AC Adapter [ACAD] (on-line) [ 34.104000] ACPI: Battery Slot [BAT1] (battery present) [ 34.192000] No dock devices found. [ 34.256000] input: Power Button (FF) as /class/input/input4 [ 34.260000] ACPI: Power Button (FF) [PWRF] [ 34.300000] input: Lid Switch as /class/input/input5 [ 34.304000] ACPI: Lid Switch [LID] [ 34.344000] input: Power Button (CM) as /class/input/input6 [ 34.348000] ACPI: Power Button (CM) [PWRB] [ 34.384000] input: Sleep Button (CM) as /class/input/input7 [ 34.388000] ACPI: Sleep Button (CM) [SLPB] [ 34.400000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 51.452000] apm: BIOS not found. [ 51.908000] Bluetooth: Core ver 2.11 [ 51.908000] NET: Registered protocol family 31 [ 51.908000] Bluetooth: HCI device and connection manager initialized [ 51.908000] Bluetooth: HCI socket layer initialized [ 51.932000] Bluetooth: L2CAP ver 2.8 [ 51.932000] Bluetooth: L2CAP socket layer initialized [ 52.184000] Bluetooth: RFCOMM socket layer initialized [ 52.184000] Bluetooth: RFCOMM TTY layer initialized [ 52.184000] Bluetooth: RFCOMM ver 1.8 [ 66.692000] NET: Registered protocol family 10 [ 66.692000] lo: Disabled Privacy Extensions [ 66.692000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 77.544000] ath0: no IPv6 routers present [ 320.952000] ACPI: PCI interrupt for device 0000:09:02.0 disabled [ 320.952000] ath_pci: driver unloaded [ 320.960000] ath_pci: 0.9.4.5 (0.9.3) [ 320.960000] ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 321.668000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 321.668000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 321.668000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 321.668000] wifi0: mac 7.8 phy 4.5 radio 5.6 [ 321.668000] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 321.668000] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 321.668000] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 321.668000] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 321.668000] wifi0: Use hw queue 8 for CAB traffic [ 321.668000] wifi0: Use hw queue 9 for beacons [ 321.668000] wifi0: Atheros 5212: mem=0xd0100000, irq=20 [ 331.988000] ath0: no IPv6 routers present [ 1362.404000] hda-intel: Invalid position buffer, using LPIB read method instead. [ 1882.340000] pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. [ 1882.340000] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. [ 1882.340000] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.